www.bmc.com

Control-M/Agent for UNIX and Microsoft Windows 8.0.00.100 Release Notes

April 2013

2

Contents

Introduction to the Control-M/Agent for UNIX and Microsoft Windows Release Notes ........... 3

Control-M/Agent enhancements ....................................................................................... 4

Control-M/Agent corrected problems ................................................................................ 6

Control-M/Agent compatibility ......................................................................................... 9

Control-M/Agent compatibility with Windows .................................................................................... 9 Control-M/Agent compatibility with UNIX ....................................................................................... 10 Control-M/Agent compatibility with Control-M components .............................................................. 12 Control-M/Agent language compatibility ......................................................................................... 12

Online help compatibility ............................................................................................... 13

Product Distribution ...................................................................................................... 13

Obtaining installation files through EPD ......................................................................................... 13 Obtaining installation files using FTP .............................................................................................. 14 Obtaining installation files through the BMC sales representative ..................................................... 15

Installation .................................................................................................................. 15

Installing fix pack 1 on Windows ................................................................................................... 15 Installing fix pack 1 on UNIX ......................................................................................................... 16 Uninstalling fix pack 1 from UNIX .................................................................................................. 18 Uninstalling fix pack 1 from Windows ............................................................................................ 18

Support for Control-M 8.0.00.100 .................................................................................. 19

Levels of support .......................................................................................................................... 19 Related documentation ................................................................................................................. 19

3

Release Notes

Introduction to the Control-M/Agent for UNIX and Microsoft Windows Release Notes BMC Software is releasing version 8.0.00 fix pack 1 of Control-M/Agent for UNIX and Microsoft Windows (Control-M/Agent). These release notes provide information about the enhancements and resolved problems in this release. The information in this document supplements and supersedes information in the Control-M Workload Automation manuals.

Up-to-date, essential installation and service information that becomes available after this product is released will be placed under solution https://kb.bmc.com/infocenter/index?page=content&id=KA388996.

Before installation, BMC recommends that you check the website for any up-to-date information and also to determine whether recent patches are available for this product.

4

Release Notes

Control-M/Agent enhancements The following table describes Control-M/Agent enhancements for version 8.0.00 fix pack 1:

Tracking # Description

CAR00041978 Name: Network Load-Balancing

Functionality and Benefits:

Control-M now supports network load-balancing routers (for example, BigIP), where the job is submitted to a virtual hostname and then routed to one of the nodes participating in the load balancing group.

To enable the feature the Control-M\EM system parameter EnableLoadBalancerRouter must be set to true, and the CMS (Configuration Manager Server) must be recycled.

Prerequisites: Control-M/Server version 8.0.00 fix pack 1 and Control-M/EM version 8.0.00 fix pack 1.

For more information, see the Control-M Workload Automation Administrator Guide.

CAR00043890 (UNIX only) Control-M/Agent can now be upgraded to Control-M Workload Automation fix pack 8.0.00.100 without any downtime.

During installation of fix pack 8.0.00.100, the Control-M/Agent disables itself so the Control-M/Server does not submit new jobs during this time. Previous jobs continue to run. After completion of the installation, the jobs' status is updated.

Ensure that you have Control-M/Server version 8.0.00 (and above) installed to enable this feature.

CAR00045489 File Watcher application fields are now supported in Find and Update and Job Filter, Find Jobs, and Hierarchy in Control-M Workload Automation, as well as the Application tab in Self Service.

Do the following:

1. Ensure that Control-M/EM has version 8.0.00.100 installed.

2. Place the file FileWatch_appl.xml into the <Control-M/EM home

directory>/etc/applfields directory for both Control-M/EM server and

Control-M/EM client.

3. Restart Control-M/EM GUI server, and reopen Control-M Workload Automation.

5

Release Notes

Tracking # Description

CAR00045951 (UNIX only) Allow starting the SAP extractor process upon Agent start-up.

The parameter, XT_AUTOSTART is manually added to the SAP parameter file ‘data/SAP.dat’ and set to ‘Y’, so the SAP extractor process (p_ctmxt) starts upon Agent startup.

CAR00046180

CAR00046181

(Control-M for Oracle Business Intelligence only) Changing the account password by using the ag_change_password utility when entering ORACLE_BI as application_type parameter is now supported for defining user and password for FTP transfers. It is now possible to update the user and passwords for the FTP transfers in the Oracle Business Intelligence Configuration Manager.

QM001766955 Control-M/Agent is now supported on Windows Server 2012.

Control-M/Agent is now supported on Windows 8.

WCTM003289 Name: Exclude RBC (Rule Based Calendar)

Functionality and Benefits:

You can now exclude dates from the schedule using the “Exclude RBC” feature. For example, specific dates, such as holidays, can be excluded from a schedule.

In the Planning Domain, you can now easily define scheduling criteria when a job, sub folder or SMART folder should not be ordered (Excluded).

This makes it simple and intuitive to set and manage both Include/Exclude RBC scheduling

Prerequisites: Control-M/Server version 8.0.00 fix pack 1, Control-M/EM version 8.0.00 fix pack 1 and INCONTROL version 8.0.01.

NOTE: You cannot check-in a workspace with jobs that belong to a Control-M/Server version 8.0.00 fix pack 1 with Exclude RBC mode enabled, if you are using a Control-M Workload Automation client version 8.0.00.

NOTE: If this feature was disabled during the fix pack installation, you need to change RBC names that start with ! and run the enable_exclude_rbc.pl perl script from the <scripts> directory. In Control-M/Server for z/OS, the default value for EXCLURBC is N, and you need to verify that no RBC, both at Control-M hierarchy and in each SMART folder, starts with !. Afterwards, change the value to Y.

6

Release Notes

Tracking # Description

For more information, see the Control-M Workload Automation User Guide.

Control-M/Agent corrected problems The following table describes Control-M/Agent corrected problems for version 8.0.00 fix pack 1.The list of corrected problems is also available under solution https://kb.bmc.com/infocenter/index?page=content&id=KA388997 in the Knowledge Base.

Tracking # Description

CAR00040461 (Agentless UNIX only) The agent now supports the system autoedit

%%ECHO_SYSOUT also for agentless. This variable overrides agent

configuration parameters, CTM_PRM_SH_FLAGS/

CTM_PRM_KSH_FLAGS that determines if and how the job script

commands are written to the job output.

CAR00041379 (UNIX only) The start-ag and shut-ag scripts update the parameter in the CONFIG.dat file by creating a temporary file. This overrides the current file with temporary file content including the updated parameter. On rare occasions, CONFIG.dat becomes corrupted, causing the agent to fail.

CAR00042210 The File Watcher and emreportcli application fields do not appear in Hierarchy Find and Update, and Job Filter in Control-M Workload Automation as well as in the SLS Application tab.

CAR00042623 (UNIX only) Control-M/Agent’s jobs that exit almost immediately and ends NOTOK, may be reported as OK. This may happen in a stressed environment. An error message may be issued in the Agent debug logs. For example:

1026 13:50:09:500 AM:OS_SCRIPT_system : waiting for a child 5073 ...

CAR00043798 (UNIX only) When a job script is in CSH, On Statements may be wrongly matched where they are defined with Stmt=* and Code=*something*

("something" appears inside an if statement in the job script).

7

Release Notes

Tracking # Description

CAR00044230 (Microsoft Windows only) Cannot get the job output when OUTPUT_NAME is changed from FILENAME to JOBNAME or JOBNAME to FILENAME.

CAR00044441 (Linux only) The su.bmc utility does not add /usr/local/bin to the PATH.

CAR00044658 (UNIX only) Where many control modules are installed, and the shut-ag utility is used, not all of the containers stop.

CAR00045051 (UNIX only) The Agent fails to start if the server to agent port has a parallel internal port with the same number as a UNIX Domain Socket inode. This can be viewed in 'netstat output'. An error is displayed by the start-ag script.

For example:

"Control-M/Agent Listener port 10501 is busy"

"Control-M/Agent Listener start failed"

CAR00045330 (Microsoft Windows only) The Agent fails to run a domain-user log on script. This occurs when the Agent is configured to log on as user and to run a user log on script.

CAR00045400 (Linux only)Control-M Configuration Manager agent properties request times out as the Agent is persistently connected.

CAR00045506 Jobs may fail if they contain a CSH script with nested IF statements and other nested blocks.

CAR00045587 (Control-M for IBM Cognos only) The ag_change_password utility does not work if Control-M for IBM Cognos is installed after Control-M/Agent version 7.0.00 fix pack 3. The following error messages are issued:

String index out of range: -1

Application COGNOS doesn't support changing account's password

CAR00045590 (Control-M for IBM Cognos only) When changing the password using the ag_change_password utility, the utility fails to issue a message advising the user to restart the container.

8

Release Notes

Tracking # Description

CAR00045591 (Control-M for PeopleSoft only) When changing the password using the ag_change_password utility, an incorrect message is issued advising the user to shut down the utility instead of advising the user to restart the utility.

CAR00045600 (Control-M for SAP version 7.0.00 fix pack 1 UNIX only) The ag_change_password utility does not work when changing the password.

CAR00045604 (Control-M for AFT only) When changing the password using the

ag_change_password utility, the output does not correctly specify to which user name the password changes or fails. The following error messages are issued:

ag_change_password -application_type FILE_TRANS -account unix_local -host cessna -user sapr3 -old_password sapr3-new_password kuku

Password change for account 'unix_local' in path:

'remote' Completed Successfully

CAR00045680 (UNIX only) A job may show status as DISAPPEARED although it

successfully completes when submitting a job with large output and heavy on-statement post processing. This can probably occur when debug level is set to 4.

CAR00045921 (CJK only) If output has many lines when using the ctmpsm utility, it

might lose characters.

CAR00046052 (Microsoft Windows only) The Control-M/Agent parameter RJX_CONN_TOUT has an empty value after installation.

CAR00046185 (Linux 64 bit only) ag_change_password does not work. Usage message does not appear.

CAR00046350 Control-M/Agent might crash when submitting remote WMI jobs.

CAR00046352 (Microsoft Windows only) Unable to recycle and restart Control-M/Agent in Control-M Configuration Manager. The Agent does not shut down, and becomes unavailable. The following error message is issued:

Failed to recycle agent Error AGT7901 CTM_AGENT

9

Release Notes

Tracking # Description

CAR00046492 (Control-M for Oracle Business Intelligence only) Changing the account password by using the ag_change_password utility is now supported.

CAR00046728 (Control-M for IBM InfoSphere DataStage only) Changing the account password by using the ag_change_password utility when entering

DATASTAGE as application_type parameter is now supported. Chap

Control-M/Agent compatibility Control-M/Agent can be installed on Windows and/or UNIX computers and works together with other products in the Control-M scheduling solution (for example, Control-M/EM and Control-M/Server).

The following lists the operating systems and other pre-installation requirements for Control-M/Agent:

Control-M/Agent compatibility with Windows (on page 9)

Control-M/Agent compatibility with UNIX (on page 10)

Control-M/Agent compatibility with Control-M components (on page 12)

Control-M/Agent language compatibility (on page 12)

Control-M/Agent compatibility with Windows The following table lists the supported Windows operating systems for Control-M/Agent.

Operating System Bits Compatible Processors

Windows XP Professional 32

64

x86

x86_64 Windows Vista Enterprise Edition

Windows Vista Business Edition

Windows Vista Ultimate Edition

Windows 7 Enterprise Edition

Windows 7 Business Edition

Windows 7 Professional Edition

10

Release Notes

Operating System Bits Compatible Processors

Windows 7 Ultimate Edition

Windows 8

Windows 8 Enterprise

Windows 8 Pro

Windows Server 2008 Standard Edition

x86

x86_64

Windows Server 2008 Enterprise Edition

x86

x86_64

Itanium (ia64)

Windows Server 2003 Standard Edition

x86

x86_64

Windows Server 2003 Enterprise Edition

x86

x86_64

Itanium (ia64)

Windows Server 2008 R2 Standard Edition

64 x86_64

Windows Server 2008 R2 Enterprise Edition

Windows Server 2012 Standard Edition

Control-M/Agent compatibility with UNIX The following table lists the supported UNIX operating systems for Control-M/Agent.

Operating system Version Bits Compatible processors

AIX®

7.1 64 Power

6.1 32

11

Release Notes

Operating system Version Bits Compatible processors

5.3 64

HP-UX

11.31

11.23

11.11

32

64

PA RISC processors

11.31

11.23

64 Itanium 64

Red Hat Enterprise Linux Server

6 32

64

x86_64

x86

IBM® zSeries®

5 x86_64

x86

IBM® zSeries®

Itanium (ia64)

Oracle Solaris

11 64 SPARC

x86_64

10 32

64

SPARC

x86_64

x86

9 (update level 9 and higher)

SPARC

SUSE Linux Enterprise Server

11

10

Itanium (ia64)

IBM® zSeries®

x86_64

x86

Oracle Enterprise Linux Server

6

5

x86_64

x86

12

Release Notes

Control-M/Agent compatibility with Control-M components The following table lists the versions of Control-M/EM and Control-M/Server that are compatible with Control-M/Agent.

Component Version

Control-M/Enterprise Manager 8.0.00

Control-M/Server for UNIX and Microsoft Windows

8.0.00

Control-M Application Plug-ins All Control-M Application Plug-ins released versions

NOTE: Some of the Control-M Application Plug-ins are installed automatically when you install Control-M Workload Automation 8.0.00 full installation. For more information, see Control-M installation.

Control-M/Agent language compatibility The following table lists the languages that are compatible with Control-M/Agent.

Language Level of support

East Asian (CJK) The following languages are now supported:

Traditional Chinese

Simplified Chinese

Japanese

Korean

Western European (Latin-1 character set)

Special Western European characters used in English, Spanish, German, and French can be specified in most free-text fields and parameters.

Basic ASCII US English

13

Release Notes

Chapter

Online help compatibility The following table lists the supported browsers for the Online help:

Third party software Version

Internet Explorer 9

8

7

Mozilla Firefox 4.0

3.6

3.5

Chrome 21.0.1180.75 Chapt

Product Distribution The following procedures describe how to obtain the installation files for Control-M/Agent for UNIX and Microsoft Windows version 8.0.00 fix pack 1, using EPD, FTP, or the BMC Sales Representative:

Obtaining installation files through EPD (on page 13)

Obtaining installation files using FTP (on page 14)

Obtaining installation files through the BMC sales representative (on page 15)

Obtaining installation files through EPD This procedure describes how to obtain the Control-M/Agent for UNIX and Microsoft Windows installation files through EPD.

To obtain installation files via EPD: 1. Click https://webapps.bmc.com/epd/ and follow the instructions on the EPD site until you reach the

Download Files page.

2. Do one of the following:

• UNIX: Do the following:

a. Download and save the file into a temporary directory :

<INST_TEMP_DIR>

14

Release Notes

If you downloaded it to your computer, transfer it to a UNIX computer using binary ftp mode to an intermediate location:

<UNIX_TAR_Z_LOCATION>

b. CD into:

<INST_TEMP_DIR>

c. Extract the compressed tar file with the following command:

uncompress –c <UNIX_TAR_Z_LOCATION>/<InstallationFileName.tar.Z> | tar xf –

For example : uncompress –c /tmp/DROST.8.0.00_Linux-x86_64.tar | tar xf –

If you have do not have an uncompress command, use zcat instead of uncompress –c:

zcat <UNIX_TAR_Z_LOCATION>/<InstalltionFileName.tar.Z> | tar xf –

• Windows: Do one of the following:

o Download and save the .iso file to a temporary directory, and then burn it onto a DVD.

o Download and save the relevant .zip file to a temporary directory.

Obtaining installation files using FTP This procedure describes how to obtain the Control-M/Agent for UNIX and Microsoft Windows installation files using FTP.

To obtain installation files using FTP: 1. Download the installation files from one of the following locations:

• UNIX: ftp://ftp.bmc.com/pub/control-m/opensystem/CONTROL-M_Agent_for_UNIX_and_Microsoft_Windows/8.0.00/PAKAI.8.0.00.100/Unix

• Windows: ftp://ftp.bmc.com/pub/control-m/opensystem/CONTROL-M_Agent_for_UNIX_and_Microsoft_Windows/8.0.00/PAKAI.8.0.00.100/Windows

2. Log on as a Control-M/Server user, and create a temporary directory (for example,TEMP_INST_DIR).

3. Copy the required files, as follows:

• UNIX: Copy the setup.sh and PAKAI.8.0.00.100_<platform>.INSTALL.BIN files that are relevant to your UNIX system in binary mode from the FTP site to the temporary directory that you created.

• Windows: Copy the PAKAI.8.0.00.100_<Windows_platform>.exe file that is relevant to your Windows system from the FTP site to the temporary directory that you created.

4. Type the following command for each copied installation file to ensure that the fixpack installation has the necessary authorizations (UNIX only):

chmod +x <installation_file>

15

Release Notes

Obtaining installation files through the BMC sales representative This procedure describes how to obtain the Control-M/Agent for UNIX and Microsoft Windowsinstallation files through the BMC sales representative.

To obtain installation files through the BMC Sales representative:

To obtain a product DVD, contact your BMC Sales Representative.

Contact information is available on the BMC website see http://www.bmc.com/corporate/contacts-locations/

Installation The installation files for Control-M/Agent version 8.0.00 fix pack 1 are available from the BMC FTP site, on the installation CD, or through Electronic Product Distribution (EPD), as described in Product Distribution (on page 13).

When installing Control-M/Agent version 8.0.00 fix pack 1 , consider the following:

(Unix only) Jobs can remain running while installing Control-M/Agent version 8.0.00 fix pack 1. (Ensure that you have Control-M/Server version 8.0.00 fix pack 1 installed.)

If the Control-M/Server is down, it is recommended to stop all jobs running on the Control-M/Agent.

The following procedures enable you to install and uninstall fix pack 1:

Installing fix pack 1 on UNIX (on page 16)

Installing fix pack 1 on Windows (on page 15)

Uninstalling fix pack 1 from UNIX (on page 18)

Uninstalling fix pack 1 from Windows (on page 18)

These release notes provide installation procedures of fix pack 1 for Control-M/Agent. For detailed instructions regarding installation of Control-M/Agent, see the Control-M Installation Guide.

Installing fix pack 1 on Windows This procedure describes how to install Control-M/Agent version 8.0.00 fix pack 1 on Windows computers.

Before You Begin Ensure that you have met the following requirements:

16

Release Notes

Control-M/Agent version 8.0.00 installed

100 MB of free hard disk space available (same amount on the %temp% directory)

Ensure that all jobs running on the Control-M/Agent have stopped.

To install fix pack 1 on Windows: 1. Log in as a Control-M/Agent administrator.

2. Do one of the following:

• If you obtained the installation files through FTP (see Obtaining installation files using FTP) navigate to the temporary directory that you created.

• If you obtained a CD (through EPD or BMC Sales Representative), insert the CD, and navigate to the Windows directory.

3. Install the fix pack using one of the following methods:

• To perform an interactive installation, double-click the PAKAI.8.0.00.100_<Windows_platform>.exe file and continue with the installation wizard, following the on-screen instructions until the completion of the installation.

• To perform a silent installation, open a command line and do the following:

a. Extract the fix pack files by typing the following command:

PAKAI.8.0.00.100_<Windows_platform>.exe -e

By default the files are extracted to %temp%. You can use -d<extractPath> to extract the files to another directory. Ensure that there is no space between -d and <extractPath>. Otherwise, the fix pack files are extracted to the default location: %temp%.

NOTE: If you are using Windows Vista, Windows 7, or Windows Server 2008, run the silent installation from a command prompt that was opened with administrator privileges.

b. Navigate to %temp%\<PAKAI.8.0.00.100> and type the following command:

silent.bat -i <instance_name>

4. To view the installation log, click the link.

5. Click Finish.

Installing fix pack 1 on UNIX This procedure describes how to install Control-M/Agent version 8.0.00 fix pack 1 on UNIX computers.

Before You Begin Ensure that you have met the following requirements:

17

Release Notes

Korn Shell (KSH) installed

Control-M/Agent version 8.0.00 installed

100 MB of free hard disk space available (same amount on the /tmp directory)

To install fix pack 1 on UNIX: 1. Do one of the following:

• Keep the Control-M/Agent running, and continue to step 2.

• Log in as the user (root or agent owner) and stop Control-M/Agent by typing the following command:

<Control-M Agent_directory>/ctm/scripts/shut-ag -u <agentUser> -p all

If you are using an AIX operating system, you must remove unused libraries from memory, by typing the following command as a root user:

/usr/sbin/slibclean

2. Do one of the following:

• If you obtained the installation files through FTP (see Obtaining installation files using FTP), navigate to the temporary directory that you created.

• If you obtained a CD (through EPD or BMC Sales Representative), mount the installation CD.

3. Log in as the Control-M/Agent user.

4. Install the fix pack using one of the following methods:

• To perform an interactive installation, type one of the following commands, and then press Y:

o CD: <CD>/Unix/setup.sh

o FTP: <temp_dir>/setup.sh

• To perform a silent installation, type one of the following commands:

o CD: <CD>/Unix/setup.sh -s

o FTP: <temp_dir>/setup.sh -s

NOTE: You can change the directory location where the temporary installation files are extracted. For example, when there is insufficient disk space in the /tmp directory.

You can use the following sample path to extract the files to another directory:

<cdmount>/UNIX/setup.sh -d <location>

The <location> variable is the required location

5. If you stopped the Control-M/Agent, log in as user (root or agent owner), and start the Control-M/Agent by running the following command:

<CONTROL-M Agent_directory>/ctm/scripts/start-ag -u <agentUser> -p all

18

Release Notes

Uninstalling fix pack 1 from UNIX This procedure describes how to uninstall Control-M/Agent version 8.0.00 fix pack 1 from UNIX computers.

Before You Begin Ensure that all jobs running on the Control-M/Agent have stopped.

To uninstall fix pack 1 from UNIX: 1. Log in as the user (root or agent owner) currently running the agent, and stop Control-M/Agent by

typing the following command:

<CONTROL-M Agent_directory>/ctm/scripts/shut-ag -u <agentUser> -p all

If you are using an AIX operating system, you must remove unused libraries from memory, by typing the following command as a root user:

/usr/sbin/slibclean

2. Log in as a Control-M/Agent user.

3. Uninstall the fix pack by using one of the following methods:

• To perform an interactive uninstall, type the following command, and then press Y:

$CONTROLM/patches/remove_fp -f PAKAI.8.0.00.100

• To perform a silent uninstall, type the following command:

$CONTROLM/patches/remove_fp -f PAKAI.8.0.00.100 -s

4. Log in as user (root or agent owner), and start the Control-M/Agent by typing the following command:

<CONTROL-M Agent_directory>/ctm/scripts/start-ag -u <agentUser> -p all

Uninstalling fix pack 1 from Windows This procedure describes how to uninstall Control-M/Agent version 8.0.00 fix pack 1 from Windows computers.

Before You Begin Ensure that all jobs running on the Control-M/Agent have stopped.

To uninstall fix pack 1 from Windows: 1. Log in as a Control-M/Agent administrator.

2. Uninstall the fix pack by using one of the following methods:

• To perform an interactive uninstall, do the following:

a. From the Start menu, select Control Panel > Add/Remove Programs > CONTROL-M/Agent 8.0.00 fix pack 1.

b. Select Remove.

• To perform a silent uninstall, do the following:

19

Release Notes

c. Navigate to the following directory:

<CONTROL-M/ Agent_ directory>\<instance_name>\install\PAKAI.8.0.00.100\

NOTE: If you are using Windows Vista, Windows 7, or Windows Server 2008, run the silent installation from a command prompt that was opened with administrator privileges.

d. From a command line, type the following command:

uninstallSilent.bat

Support for Control-M 8.0.00.100 These topics provide information about the following:

Levels of support (on page 19)

Related documentation (on page 19)

Levels of support For more information about the latest support policies and guidelines, see the Customer Support page of the BMC website at http://www.bmc.com/support.

Related documentation To view the latest BMC documents, including documents in other languages, see the Customer Support website at http://www.bmc.com/support.

Notices, such as flashes, technical bulletins, and release notes, are available on the website.

You can subscribe to proactive alerts to receive e-mail messages when notices are issued or updated. For more information about proactive alerts, see the Customer Support website.

20

© Copyright 2013 BMC Software, Inc.

BMC, BMC Software, and the BMC Software logo are the exclusive properties of BMC Software, Inc., are registered with the U.S. Patent and Trademark Office, and may be registered or pending registration in other countries. All other BMC trademarks, service marks, and logos may be registered or pending registration in the U.S. or in other countries. All other trademarks or registered trademarks are the property of their respective owners.

IBM® Tivoli ®Workload Scheduler trademark or registered trademark is the trademark or registered trademark of International Business Machines Corporation in the United States, other countries, or both.

Linux is the registered trademark of Linus Torvalds.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

UNIX is the registered trademark of The Open Group in the US and other countries.

The information included in this documentation is the proprietary and confidential information of BMC Software, Inc., its affiliates, or licensors. Your use of this information is subject to the terms and conditions of the applicable End User License agreement for the product and to the proprietary and restricted rights notices included in the product documentation.

For the provisions described in the BMC License Agreement and Order related to third party products or technologies included in the BMC Product, see the "ThirdParty" subdirectory in the installation directory of this product.

BMC SOFTWARE INC 2101 CITYWEST BLVD, HOUSTON TX 77042-2827, USA• 713 918 8800 Customer Support: 800 537 1813 (United States and Canada) or contact your local support center.