For all your bulk material handling requirements

ConveyorandElevatorRange

BRITISH BUILTFOR QUALITY

Slip Form Belt Conveyor

Chain Conveyors

Loose flanged inletwith plain coverplate included forpositioning on site

Top lap sealing platefor weatherproofinstallation

Self-lube, sealedfor life bearingsexternal to casing

Manually adjustedinboard chaintensioners

Dimpled side jointplates for flush interior& self aligningassembly

Bottom lap platefor sealing at joint

Access panel oroptional sight glass onboth sides of drive end

Flanged open endoutlet fitted asstandard

Support footon end plate

8 tooth hardenedsteel sprockets atdrive and tail ends

Low maintenancecompact shaftmounted gearmotordrive unit

Choke protectionswitch (optional)

General Features of the Carier Range� Elevators and conveyors supplied in two casing sizes covering throughputs of 40, 60, 80 and 100tph cereals @ 750kg/m3� Conveyor lengths up to 60m long, elevators up to 30m high� All galvanised steel casing construction as standard for indoor or outdoor applications� Low maintenance shaft mounted gearmotor drives with IP55 motors up to 7.5kW

Soft Flight Angleveyor

80mm pitch DIN8167bushed chains, strengthto suit duty required

Cleaning flights fittedas standard at 6m pitch

UHMWPE noisereduction strips fitted tofloor and return chainsupport rail

Floor plate rivettedto conveyor sides

Conveyor

Screw Conveyor

Bucket Elevators

Shaft, bearings & pulley removable inone piece, for simplicity of servicing

Head pulley secured to shaftwith taper-lock fittings,prevents sideways movement

Low maintenance shaftmounted gearmotor drivewith integral backstop

Central shedder under pulley

Maintenance Access Doors(not pictured), generouslysized at full leg width

High tensile belt with EP coreand SBR covers

High efficiency, low profile,pressed steel buckets

45o flanged low level inletwith two height positions

Boot pulley secured to shaftwith taper-lock fittings,prevents sideways movement

Profiled, close tolerance,boot radius plate forminimum residue

Profiled sweep plate for highefficiency & durability

Split hood section forease of maintenance in

low headroom situations

Head bearings on jackingbolts for easy belt tracking

Large access panel inboth sides of head

Full sized, highefficiency outlet

Adjustable flexible outletthroat plate

Rolled steel angle flanges

Jig assembled heavy dutylegging

Screw adjusted belttensioners fitted as

standard

Removable back panel,suitable for additional inlet

if required

Generously sized bootcleaning doors

Chain Conveyors (chain width / tph): 200/40 200/60 250/80 250/100

Bucket Elevators (bucket width / tph): 140/40 140/60 180/80 180/100

Angleveyors (chain width / max tph): 200/60 300/100 up/down bends 10-45°

Slip Form Belt Conveyors (belt width / tph): 300/40 380/60 500/100

Trench, Mechanical Intakes for Chain Conveyors: 3000mm std length special lengths to order

Notes. 1. Product capacity in tonnes/hr (tph) is based on dry cereals at 750 kg/m3 2. Capacity is dependant on product flowability and conveyor incline

� Robust Construction� Latest Designs� Using the LatestTechnology

� Easy to Assemble� Full range of Accessories� Supported by Carier Care

Options:

� Double Leg Elevators� Conveyor Intake Systems� Flow and ReturnConveyors

� Outlet Slides� Ducting and Fittings

and Elevator Range

Carier Care Supported

Guttridge LtdWardentree ParkSpaldingLincolnshirePE11 3UUUnited Kingdom

Tel: + 44 (0) 1775 765 300Fax: + 44 (0) 1775 765 304sales@carier.co.ukwww.carier.co.uk

Options & Accessories

� Automatic spring loaded chain tensioners� Flow and return arrangement� Open bottom sections for store fillingapplications

� Trench intake or mechanical intake systems� Full range of outlet slides including handslides, rack & pinion (remote), electro-pneumatic or motorised. Inline and crossslide options available

� Outlet adaptors and full range of standardducting & fittings

� Recycle cups fitted to chain for recirculationof carryover

� Diaphragm switch in end plate for chokeprotection

� Under-speed rotation sensor on tail endshaft

� Sight glasses fitted in sides of casing� Upward or return bend sections (subject toreduction in throughput)

� Span Brace assembly for unsupportedspans up to 12m

� ATEX certification

� Maintenance access platforms, intermediaterest platforms and ladders with safety hoops

� Outlet adaptors and full range of standardducting & fittings

� Cage type bottom pulley� Seed Boot (stand and pullout tray for easiercleaning)

� Pressure relief panels - flap & switch ormembrane type to meet ATEX standards

� Belt scraper on rising leg� Bucket spacing washers (typically for seedapplications)

� Nitrile belt for materials with high oil/fatcontent

� Alternative belt and bucket systems forspecial applications

� Under-speed rotation sensors for belt slipdetection

� Belt misalignment sensors� Bearing temperature sensors� Monitoring systems for safety sensors� ATEX certification

Carier Bulk Materials handling, foundedin a small workshop in a tiny Essex villagein 1948, quickly became acknowledgedleaders in the development andmanufacture of bulk handling systems andequipment for grain and cereals,providing a range of robust and reliablemachines to provide enduring satisfactionon which our products are based.

Carier have skilled plant design andlayout engineers and provide an efficientspare parts service as well as maintainingrecords of every machine, so that sparesinformation can be provided however oldthe machine may be.

Customers are encouraged to consult withour sales engineers and design specialistsfrom the earliest inception of any project.They will gladly furnish all technical data,readily offer their advice on every aspectand remain enthusiastically involvedthroughout all stages of design andmanufacture to final commissioning andbeyond. Careful note is always taken ofuser experiences with our products andwe are indebted to our many customersthat have taken interest in our activities forthe steady advancement of our range.

Conveyor Options Elevator Options