13 thConvocation

F e b r u a r y 1 8 t h , 2 0 1 8

ABES Engineering College, Ghaziabad

Degrees Conferred by :

Prof. Vinay Kumar PathakHon’ble Vice Chancellor

Dr. A.P.J. Abdul Kalam Technical University, UPLucknow

Chief Guest :

Shri Ravindra Kumar VermaChairperson I/C, Central Electricity Authority

Ministry of Power, Government of India

NAAC Accredited & NBA Accredited Branches (CSE, ECE, ME, EN & IT)

Shri Ravindra Kumar Verma is presently holding the charge of Chairperson, Central Electricity Authority, Ministry of Power, Government of India. He is also working as Member, Grid Operation and Distribution (GO&D) in the Central Electricity Authority. He has He did his graduation in Electrical Engineering in 1979 from DCE. He began his career with BHEL and he joined CEA in January 1981.

As Chairperson, CEA he is responsible for the discharge of CEA's statutory functions and duties which are enshrined under the Electricity Act, 2003 and broadly include formulation of National Power Policy & Plans, Integrated resource planning and optimization of resource utilization, Policies for safe, secure and economic operation of regional and national grid, Techno-economic evaluation of power projects, renovation and modernization schemes, investigation of accidents on electrical installations, environmental aspects of generation projects, monitoring of rural electrification and optimization of Distribution network, regulatory, legal and financial matters co-operation with neighboring countries for development of water resources, cross boarder power transmission, etc.

He has been the Team Leader of the Central Team constituted by Ministry of Power, under the joint initiative taken by Government of India.

He is also the Chairman of the Technical Committee of National Smart Grid Mission constituted for evaluation of Detailed Project Reports and finalisation of benchmark costs etc.

He has been associated with various Committees including those for development of Indian Electricity Grid Code, Indian Electricity Act, formulation of various schemes of Government of India.

He has also been a member of various Sectional Committees of the Bureau of Indian Standards dealing with Electricity metering/Transformers.

He has been appointed as a Part-time Director on the Board of Nuclear Power Corporation of India Limited with

th effect from 27 April 2017.

13thConvocation

F e b r u a r y 1 8 , 2 0 1 8

Shri Ravindra Kumar Verma

Vinay Kumar Pathak had a bright academic career of 20 years as lecturer, Asstt. Professor, Project Scientist, Professor, Dean at HBTI Kanpur and Vice Chancellor, UOU Uttarakhand, VMOU Rajasthan and additional charge of RTU, Rajasthan.

Dr. Pathak did his B.Tech in Computer Science from Harcourt Butler Technological Institute, Kanpur in 1991, M.Tech from IIT Kharagpur in 1988 and Ph.D. in Computer Science from U.P. Technical University Lucknow under the joint guidance of IIT Kanpur November 2004. Research interests of Dr. Pathak include Computational Geometry and Image Processing. Dr. Pathak has been instrumental in implementation of Vedic Mathematics in year 1992. He had worked in Media Lab Asia and successfully did the work of info-sculpture. He is Member of Board of Management of IGNOU, Chairman, Technical Committee of MP Bhoj Open University, Member of Advisory committee, Rajiv Gandhi Tribal University, Udaipur, Board Member, Rajasthan Knowledge Corporation Limited (RKCL), Member, RUSA Committee, Uttarakhand.

He worked with Intel Corp. and established a specialized lab in UP Technical University, Lucknow as HOD of CS. He executed several MoUs with Intel, Microsoft and IBM at HBTI for high-tech learning.

Under Dr. Pathak’s guidance 5 Ph.D students have been awarded degree and 4 Ph.D students are enrolled. Dr. Pathak has attended many national and international conferences both in the country and abroad including France, Spain, USA, Portugal, Hungary, Morocco, South Korea, China, Macau, Singapore, Egypt, etc. He has published more than 50 publications in proceedings of International Conference & journal of repute. Dr. Pathak is a professional member of research degree committee in U.P. Technical University, member of studies of U.P. Technical University and expert member of NBA of AICTE.

ABESEC Guru Shishya Parampara is an epitome of academic heritage believing in ”, it is the revered place of learning “

nurture students overall personality, inculcate moral values to attain academic excellence. We believe in pragmatic,

creative and interactive learning approach with emphasis on quality education to budding technocrats and managers.

Courses OfferedUndergraduate Programmes [B.Tech. (4 years full time degree program)]

Civil Engineering - 120

Computer Science & Engineering - 180

Electrical & Electronics Engineering - 120

Electronics & Comm. Engineering - 180

Information Technology - 120

Mechanical Engineering - 180

First Shift

Postgraduate Programmes

MCA (3 years full time program) - 120

MBA (2 years full time program) - 120

M.Tech. (2 years full time program)

Computer Science and Engineering - 18

Electronics and Communication - 18

Mechanical Engineering - 18

Vision

Mission

To take the ABES Engineering College by the year 2020 to such a level, that it is an equal partner of the other leading

institutions of the world. Provide leadership to the international education system and be rated as one of the top world

institutions which produces world-class competent and dedicated technical and managerial human resources embedded

in traditional Indian values and positive attitudes

To create an ambience for a healthy teaching learning process. To nurture students and infuse in them :

! a passion to excel professionally

! a spirit to be of utmost use to the industry, corporate sector and society at large

! an intense desire to take on challenging responsibilities and leadership roles.

! a craving to be wholesome good human beings.

! To develop an environment for creating new knowledge through research and by thriving to explore innovative

ideas.

Quality Policy

To continuously thrive to provide a congenial and wholesome academic environment and a healthy culture for

faculty, staff and students which would motivate teachers' full participation with passion and develop an intense

desire in the students to acquire comprehensive education and hence become a useful and confident human

resource for the industry and academia.

More than anything else, ABES Engineering College is one of

the pioneering Engineering institutes of Ghaziabad, in the

state of Uttar Pradesh. The guiding forces of our institution

are always, propagation of knowledge, devotion in work and

dedication towards learning of science and technology

kindling the spirit of “Vigyanam:, yagyam:, Tanute”. The

vision of our institution is to chisel and ignite the young

technocrats and budding management graduates into

effectual technocrats, software professionals & committed

managers. ABES is fulfilling this vision continuously from past

18 years and in the quest, produce abundant finely nurtured

and skilled professionals to combat tough challenges in the

competitive global arena. These skillful respectable human

resources; imbibed with ethical, moral and human values are

continuously contributing in society and nation building.

Society for Educational Excellence

With a strong vision and a noble belief, Mr. Ved Prakash Goel

founded “Society for Educational Excellence” (SEE) in year

1999 under his chairmanship. The inception of 'SEE' focused

on Quality Technical and Professional Education, various Skill

Development and Training and creating Samaritans for

nation building. In year 2000, this dream was seeded,

resulting in establishment of “Academy of Business and

Engineering Sciences” (ABES).

ABES Engineering College… A Brand

ABES Engineering College is a manifestation of academic

heritage, with strong belief in the legacy of “Guru-Shishya

Parampara”. At this temple of learning, we are rooted to our

rich tradition and culture and our focus is on human values,

academic excellence, enhancing over all personality

development, empowering the students with the modern

trends of global technical knowledge and professional skills;

imbibed with the Indian value system. ABESEC is focused as

“student driven” institute of higher learning with a mission to

create an ambience for a healthy teaching – learning process,

to nurture students, faculty and staff, to instill a passion to

excel professionally. A pragmatic, dynamic and creative

approach in education has been adopted towards building a

pool of robust and highly skilled budding Technocrats and

Managers; at par with global standards.

A thousand mile journey of ABES Engineering College

Mr Ved Prakash Goel started his journey to establish ABESEC

with a noble mission to provide amalgamated and state of art

education to young minds in the field of Engineering &

Management Education. Initially, the programs offered by

the institution were Bachelor of Technology (B.Tech) in

'Computer Science Engineering', 'Information Technology'

and 'Electronics and Communication Engineering' along with

the Master degree in Computer Applications (MCA) under

the norms of AICTE, New Delhi and UP Technical University,

Lucknow with UPTU Code 032.

Trail of Triumph...

ABES Engineering College5

Estd. 2000

Hon’ble Vice Chancellor of Dr. A.P.J. Abdul Kalam Technical University, U.P. Lucknow, Prof. Vinay Pathak, Shri Ravindra Kumar

Verma, Chairperson Central Electricity Authority and ex-officio Secretary to Govt. of India, Minsitry of Power, The President,

ABES Engg. College, Sri Neeraj Goel, Vice President Sri Sachin Goel, Advisor Sri Rahghunandan Kansal, Members of the Board

of Governors, Faculty, Staff, Graduating students, Ladies and Gentlemen, it gives me immense pleasure to extend a very warm

welcome to all of you on the occasion of 13�� Convocation of ABES Engineering College, Ghaziabad.

To all my beloved students, I am elated to see you graduating this year. I convey my heartfelt congratulations to each one of

you. I am sure the precious time that you have spent here will go a long way in creating a solid foundation for a brilliant career.

You have learnt enough of theory and practice in various Technical and Management facets; but, above all, you have also

learnt how to work together while keeping your own identity. This learning will be there with you throughout your life and you

will inspire many lives in future. I am also confident that you will always remain connected to your own institution and

contribute in building the future of many ABES students.

My profound gratitude goes to the parents and guardians too, who have shown immense faith in the choice of students to

come to ABES Engineering College. I hope we have been able to meet your expectations. Even though our institution is just 18

years old, we have been brilliantly achieved a remarkable growth that serves as a role model for other institutions. The

concerted and relentless efforts of each stakeholder of ABES Engineering College are the great examples of the unity of many

in body, one in mind. I would like to specially put on record, that the marvelous, monumental expansion of the ABES students

in particular, will surely be remembered as a “Wonderful Story” that will be shared from generation to generation and endure

for all time! Thank you! Thank you so much!

Director’s Report

ABES Engineering College

Since then, many under graduate and post graduate

programs have been added to the Institution like

'Mechanical Engineering' in 2003, 'Master in Business

Administration' (MBA) in year 2006, 'Electrical and

Electronics Engineering' in 2008, 'Civil Engineering' in 2011

and also programs of Master in Technology (M.Tech) in 2010

in the branches of Computer Science Engineering,

Electronics and Communication Engineering and

Mechanical Engineering. In year 2009, 'Academy of Business

and Engineering Science' (ABES) had further branched out

another institution with the name of 'ABES Engineering

College' with UPTU code 032. I would like to share our recent

accreditation and Certification with you all.

Affiliation and Approval

Ÿ Affiliated to Dr. APJ Abdul Kalam Technical University,

LucknowŸ Approved by AICTE and Ministry of HRD, New Delhi

Accreditation & Ranking

· Accredited by National Board of Accreditation, NBA,

New Delhi, for Courses CSE, ECE, ME, IT, EN and

result awaited for MBA

· A c c re d i te d by N at i o n a l A s s e s s m e nt a n d

Accreditation Council (NAAC)

· Accredited by Tata Consultancy Service and Tech

Mahindra

· NIRF Rank (151-200)

Certification· An ISO: 9001-2008 certified institution by TUV

Netherland

Our Faculty – The beacons of HopeFor any learning institutes, faculty fraternity is the biggest

strength and so is ours. We are proud to have qualified,

experienced, committed and dedicated team of about 278

faculty members having past association with reputed and

renowned institutions. Many of them have rich experience

of the corporate world as well which works as a boon for our

students. They are the backbone of our academic and

research activities and mentoring 4300 students individually.

As a result, in the last one year only, students with the

mentorship of faculty have published around 25 research

papers and members of faculty have published 38 papers.

We have 27 faculty members who have PhD degrees and 49

are pursuing PhD. The college is also providing financial

support to faculty members for holding memberships of

professional societies and is also motivating students

towards adapting a new path of learning through these

societies. In the last one year around 55 faculty

seminars/workshops and Faculty Development Programs

were conducted in the college with inputs from

national/international eminent speakers.

Currently, we are running Undergraduate Programs in Civil

Engineering, Computer Science Engineering, Electronics and

Communications Engineering, Electrical and Electronics

Engineering, Information Technology and Mechanical

Engineering. Our college also has post graduate programs in

Computer Science & Engineering, Electronics and

Communications Engineering and Mechanical Engineering, a

part from MCA and MBA programs. It has been a legendary

trend that our students always remain among the top

achievers and position holders in the university examinations

in different semesters & streams. With great pleasure, I

would also like to convey that we have completed the process

of accreditation from NAAC. It is a great moment of pride that

NBA Accreditation of Computer Science Engineering,

Electronics and Communication Engineering and Mechanical

Engineering have been completed in 2017 and we have

recently undergone the process for Electrical and Electronics

Engineering, Information Technology and MBA.

We have recently advance our infrastructure with all latest

requirements.

InfrastructureŸ Built on a sprawling area of 15.2 hectareŸ Fully wi-fi campus under surveillance of 500 cameras Ÿ Around 100 fully A/c classes and tutorial rooms, separate

A/c rooms for labs, seminar halls, conference halls, and state of art auditorium and stadium

Ÿ Solar plant of 300KW capacityŸ State-of-art library with the collection of 7584 titles and

103799 volumesŸ 345 New titles and 1061 volumes added in the academic

year of 2016-17Ÿ The library operations are automated using LibSys softwareŸ Users can place online reservations, find out real time

availability library materials from their own computer terminals, browse for new additions of books; journals subscribed

Ÿ More than 26 magazines, 110 Indian and Foreign E-journals:54-ACM, 275 Elsevier (Science direct)

Ÿ 308 Cassettes and CDs for all branches and programmes. Ÿ A separate e-resources section is provided in the library to

browse CDs and DVDs of books

6 13thConvocation

F e b r u a r y 1 8 , 2 0 1 8

ABES Engineering College

We have recently added another feature in our college and

that is an Olympic size swimming pool. I am elated to

announce that, our college is the only college in our vicinity

of Delhi/NCR having this special feature of swimming pool.

Now I want to take an opportunity to introduce you all to the

four pillars of ABES Engineering College that are playing an

important role in holistic development of students towards

their future.

· Academics

· Applied Research

· Skill Building

· Career Planning

Academics is always treated the base of any institution as it

brings all the students on common platform. The growth and

success of students and institutions are directly

proportionate to the quality of academics. Our college is

focusing on the quality of academics and for the same an

initiative has been taken by us in a form of Centre of

Excellence for Teaching and Learning (CETL).

Center of Excellence for Teaching and Learning (CETL)CETL (Centre of Excellence for teaching and learning) has

been established for enhancing the skills of delivery and

effective learning. The center is equipped with the latest

technology, learning tools and supporting infrastructure, a

committed team of subject matter experts adds strength to

the center.

CETL has started a YouTube channel to showcase the e

content developed by faculty members. 220 video tutorials

have been uploaded so far and the counting is still on. I am

happy to report that more than 1400 people have

subscribed to this channel and are taking benefits.

YouTube Link

(https://www.youtube.com/channel/UC2FRToMrgAHFEKkC

IgZS2Uw)

Another great initiative has been taken by CETL in a form of

faculty development handbook which consists of a primer

and all the essential information needed by present day

engineering educator. It is a tool which is being used for the

professional development of faculty members.

Faculty Certification: Twenty faculty members have

participated in IIEECP certification programme phase-I and

at present seven faculty members have completed Phase-II

IIEECP certification programme offered by IUCEE .

Total 5 faculty members are certified in “Teaching learning

methodologies” by IUCEE after completing phase III.

Focus area and objective of CETL are as followed:

Applied Research in ABES Engineering College refers to the

liberty given to the students and faculty members to

transform their dreams into reality. Applied research is used

here to find solutions to everyday problems, Entrepreneurial

challenges, and develop innovative technologies. We have

started a centre by the name of Centre for Applied Research

and Entrepreneurship (CARE).

Centre for Applied Research and Entrepreneurship (CARE)CARE works as a driving force among students and innovation

is the fuel. This department works beyond boundaries and

give wings to those students who are aspiring their career in

Research and Entrepreneurship. CARE has works with a

mission to promote Research and Entrepreneurship among

students. I am proud to share that with in the span of 4 years

CARE has nurtured many ideas of students and making them

capable to execute them further. Under the aegis of CARE,

students won number of prizes in national/international

competitions like SAE Efficycle, ROBOCON and Australian

UAV Medical Express Challenge etc.

7

Estd. 2000

Academics

Applied Research

I am proud to share that with in the span of 3 years CARE has

nurtured many ideas of students and making them capable

to execute it further. Few of the initiatives are mentioned

below:

Dr. A.P.J. Abdul Kalam Technical University, U.P. Lucknow, is

known for its unique approach and that is to uplift the skills

of each student while pursuing any technical program. ABES

Engineering College is also standing alongside the university

to promote the same approach among students. I am

delighted to share that in the same field, our college has

created a department who is fulfilling the same mission and

that department is Centre for Building Skills and

Employability (CBSE)

Centre for Building Skills and Employability (CBSE)CBSE is working on Industry-Institute Interaction and

preparing the manpower of world class in the field of science

and technology by inculcating the various skills required by

the industry. Though availability of manpower is abundant in

India, well equipped manpower with employability skills is

the need of the hour. There is a need to create avenues for a

close academia and industry interaction through all the

phases of technology development, starting from

conceptualizing to commercialization.

This vision can only be achieved well by regular better

interaction between technical institutions and industry. The

rise of a global knowledge economy has intensified the need

for strategic partnerships. The Institutes are imparting the

basic knowledge and skill, but the Industry-Institute

Interaction will enable to undertake research by staff and

students relevant to the industry. CBSE allows students to

peep into the real world before entering into it and making

the transition smooth for students and industry.

Towards this initiative, please allow me to mention a few of our steps:

· CBSE is working as a bridge between industry and

students in terms of learning and development and for

the same it collaborates with industry to know the latest

trends in technologies. It pursues the industry to open

their labs in campus for students and provide them

training as per their requirement. Since 2012 under CBSE

more than 10 COEs have started working and enhancing

students' skills for better future.

1. Last year 2017 we have established our latest Center of

Excellence in Automobile

2. In 2016 the Texas Instruments Embedded System Lab

emerged in our campus

ABES Engineering College 8

Building Skills

S. No. Program Name Description Time Outcome

1 ROBOCON - 2017

International robotics competition o r g a n i z e d b y A s i a P a c i f i c Broadcasting Union. Objective is to design and fabricate electro-mechanical systems that could perform a series of tasks.

October, 2016

All India 25 rank

among around

100 participants.

September,

2016

7 positions in top 10. Best position

ndwas 2 position in National StudentsSpace Challengeorganized by ISROand IIT Kharagpur.

Organized participation in national l e v e l d e s i g n a n d r o b o t i c s competitions organized by IITs and NITs. Sent more than 41 students to more than 6 events . A lmost everyone secured some rank. 4 teams secured ranks in top-5.

BATTLE -51

2016-172

3 HPVC-2017

International event organized by American Society of Mechanical Engineers. Objective is to make a human powered vehicle.

October, 2016

All India 17 Rank

4SOLAR VEHICLE

(ESVC) 2016-17

To make solar powered vehicle capable of carrying at-least one human passenger. International robotics competition organized by Asia Pacific Broadcasting Union.

September, 2016

All India 6 Rank

5SAE-EFFICYCLE-AND

-CROSS-TRIKE-2017

The events provides an opportunity to the students to conceive, design and fabricate a three wheel configuration vehicle powered by human and electric sources and capable of seating two passengers. The vehicle must be a e ro d y n a m i c e n g i n e e re d fo r p er fo rman ce an d safety an d ergonomically designed. The objective is to promote innovation and generate consciousness amongst the young engineers towards environment friendly mobility solutions.

November, 2017

thAll India 5 Position & Uttar Pradesh

nd2 Position

13thConvocation

F e b r u a r y 1 8 , 2 0 1 8

3. Year 2015 was the year of many developments like; in

2015 we establish the Centre of Excellence for Structural

Design and Analysis with the aim of developing skills and

concepts among students and empower them to

successfully use the emerging technology.

4. For Electronics and Communication students we have

established one Centre of Excellence in VLSI Designing

in 2015

5. In the field of big data we have provided a platform to

our students in a form of Center of Excellence for Big

Data Analytics lab, which was also established in 2015.

6. Another Centre of Excellence for SMC India Pvt Ltd.

Established in year 2015

7. Centre of Excel lence for Mobi le Appl icat ion

Development was also established in 2015

8. Year 2014 in collaboration with National Instruments we

set up ABES-NI Innovation Centre.

9. In 2013 we established Cisco Networking Acedemy in

our premise.

10. Center for Enterprise Software Development was also

established in year 2013

11. We have established Industrial Automation Research &

Training Centre (IARTC) in 2012 in technical association

with ROCKWELL AUTOMATION.

· I would like to bring your attention towards many other

Initiatives under CBSE and which are

1. Employability and soft skills Training

2. Aptitude Training

3. English Language Training

4. Counseling Cell

The main endeavour of Career Planning is to make students

employable and get them placed in reputed conglomerates,

government Officialdoms, NGO's and the private sector.

Career Planning in ABES Engineering College is primarily of

Career Choices, Placements and Counseling. We have Center

for Career Planning and Development (CCPD) cell which is

working with the same objective to provide many

opportunities to all students.

Centre for Career Planning and Development (CCPD)CCPD acts as an interface between the industry and the

students, and primarily enables the students to select from

their career options. In CCPD Placement cell in sync with

Training and Development team to facilitate the selection

process of all the companies as per their requirement.

It is bound to liaison with corporate organizations to provide

suitable jobs and internship for the candidates completing

their studies from ABESEC. CCPD regularly conducts seminars

and workshops to enable the students of ABESEC to become

successful professionals.

Placements

Now I would like to draw your attention towards Salient

Features of ABESEC placements session 2016-17:

· 92.43% of eligible students placed in top notch

companies across globe.

· 807 out of 873 eligible/registered students offered in

364 companies.

· Highest Package offered was INR 14.50 LPA.

Top five companies in terms of no. of selects:

1. SMARTPRIX WEB PVT. LTD.

2. DRISHTI SOFT SOLUTIONS PVT. LTD.

3. DIRECTI

4. FORESIGHT GROUP INTERNATIONAL AG

5. ADOBE SYSTEMS

The journey of entrepreneurship at ABES Engineering

College, Ghaziabad was started with the support of AICTE,

New Delhi in year 2009 by sanctioning Entrepreneurship

Development Cell (EDC) vide letter no. 8022/RID/EDC

(55.)/2008-09 dated 11.02.2009. It is an initiative to expedite

the culture of entrepreneurship amongst the students and

faculty members of ABESEC through various programmes

and activities.

ABES Engineering College

Estd. 2000

9

Career Plannning

Placement 2016-17

ABES Startup Labs (ASL)

In year 2014 the EDC was merged into Business Incubator

recognized by Ministry of Micro, Small & Medium Enterprise,

Govt. of India. The Business Incubator at ABESEC is now

known as “ABESEC Startups Lab (ASL)”. The ASL is now

capable to provide complete support for launching a startup

along with extends the support to academics departments

for R&D, consultancy & IP protection. The institute's

management has provided dedicated state-of-art space of

around 16000 sq. ft. to build incubation facilities like

dedicated working space, conference/meeting room,

workshop, computer lab etc. The experienced and

knowledgeable mentors' pool connected with ASL provides

support to students in their entrepreneurial journey.

During 2017-18 the department has received sanction of

Rupees 24.5 lacs to conduct various Entrepreneurship based

activities which includes:

Measure Outcomes:

1. Seven enterprises has been successfully launched and

running by the students under ASL.

i. Clunch Hub

ii. Rent it Out (RIO)

iii. Sampada Venture

iv. YCD Services Pvt. Ltd.

v. Mavan Technologies

vi. Pulcifiyer

vii. Reclipped

2. The trained faculties are now closely involved in the

promotion and development of entrepreneurship culture

in the society.

3. Three EDC centers have been created by the faculty

members trained under FDP at other institutions.

(a) Swami Vivekanand Institute of Engineering &

Technology (SVIET), Banour, Punjab.

(b) G.L. Bajaj Institute, Mathura

(c) TeerthankerMahaveer University, Moradabad.

4. The coverage of ASL reached to 11 cities where about

1625 candidates will be trained.

Programme Benefits:

(a) Faculty members of different colleges are taking initiative

to train their students.

(b) Young people are encouraged to start their own

enterprises with new ideas.

(c) To fulfill the need of nation by involving entrepreneurship

with technology through TEDPs (Technology Based

Entrepreneurship Development Programme).

(d) To encourage women to initiate their ideas and become

entrepreneur.

Highlights:

Partner institute under PM YUVA YOJANA sponsored by

ministry of entrepreneurship and skill development.

To inculcate leadership qualities and provide a venue to

sharpen their creative skills, the college runs 11 clubs such as:

1. Spirituality & Yoga Club

2. Minerva-Literary Club

3. Pelicula-Movie Club

4. NSS Club

5. SPIC MACAY Club

6. Cultural Club

7. SAMVAAD-Dramatic Club

8. Environ Club

9. Picturesque-Photography Club

10. Creative U Club

11. AAGHAZ-Student's Publication Club

Recently,one more club is added in this series as Social

Media Club.

10ABES Engineering College

Ĭ BÍ ŎB Programme

Name

No. of

prog.

Programme locations Target participants No. of

trainees

1 Entrepreneurship

Awareness Camp

15 Ghaziabad, Faridabad,

Panipat, Moradabad,

New Delhi, Roorkee

Diploma/ Science

graduates/Engineering

students

1400

(approx.)

2 Entrepreneurship

Development

Programme

2 Aligarh, Bulandshahr Diploma/ Science

graduates/Engineering

students

50

3 Women

Entrepreneurship

Development

Programme

2 Moradabad, Hapur Diploma/ Science

graduates/Engineering

students (girls/women)

50

4 Faculty

Development

Programme

2 Ghaziabad, Bareilly Faculty members of

Engineering,

management and

polytechnic colleges

50

5 Technology Based

Entrepreneurship

Development

Programme

2 Ghaziabad Diploma/ Science

graduates/Engineering

candidates

50

13thConvocation

F e b r u a r y 1 8 , 2 0 1 8

Club Activities:

Ÿ ACM ABES –W celebrated “ACM Annual event cum W

Celebration” from 26-28 October 2017. During three days

event, more than 100 students' participated and female

speakers and faculty participated in panel discussions with

students.

Ÿ ABES Engineering College organized 4th IEEE International

Conference on Computational Intel l igence and

Communication Technology (CICT 2017) on Feb 9-10,

2018. In this conference More than 250 papers were

submitted from national and international authors and 45

papers were presented by researchers from industry and

academia (Acceptance rate is 18 %.). Participants from the

countries like China, Taiwan, South Korea, and so many

other countries were also present in this conference.

Guest Speakers:

· Mr. Ramesh Rana from HCL technologies Ltd.

Engineering Research Services, Pune, presented his

views on 'Expectations of Industries from Mechanical

Engineering Graduates” (24/10/2017)

· Mr. Pietro del Sorbo, ENSAM, Department of Durability

Materials of Assemblies and Structures enlightened the

audience on topic “Simulation and Finite Element

Analysis” (17/11/2017)

· Dr. Safiullah Timorian, from University of Naples

Federico II presented his talk on topic “Engineering

Simulation and Finite Element Analysis Tools”

(17/11/2017)

· Dr. G. N. Pillai from IIT, Roorkee presented his talk on

“Soft Computing” (19/04/2017)

· Mr. Yogesh Kr. Singh, NISE, Gurgaon, presented his views

on “Solar Energy Technical & Employability Prospects”

(08/04/2017)

· Mr. Ankit Arora, Mr. Prabhat Singhal & Ms. Sonika

Thakral presented their views during ACM Annual Event th

cum ACM-W celebrations (26-28 Oct. 2017)

· Mr. S. C. Maiti, Ex-Scientist, ICI presented his views on rd

“Mix Design”. (23 Sept. 2017)

· Dr. Nils. U. Moe, presented his view on “Data Security

and Privacy” (01/06/2017)

ABES Engineering College, Ghaziabad has organized various

Faculty Development programs and Many Professors from

International/National Institutes like IITs institutes

participated in it.

· ICT based “Wireless and Mobile Communication” from

NITTTR, Chandigarh by Department of Electronics and

Communication engineering from 30 Oct to 3 Nov. 2017.

· ICT based “VLSI Design” from NITTTR, Chandigarh by

Department of Electronics and Communication

engineering from 5-9 Oct, 2017.

· Electronics & Communication Engg. Deptt conducted

FDP on “VLSI for Signal processing & Communication,

which was sponsored by AKTU, 12-16 June 2017.

· Department of Civil Engineering Organized a FDP on

REVIT from 9-13 Oct, 2017

· ICT based FDP on “Green and Clean Energy” from

NITTTR, Chandigarh at ABES Engineering College,

Ghaziabad from 13/11/2017 to 18/11/2017 by

Mechanical Engineering Department.

Swimming PoolTo enhance physical and mental health of students, faculty

and staff members ABES-EC took initiative and built semi

Olympic size swimming pool with the facility of best coaches

and life guards.

Sports Activities

The campus has various sports facilities with synthetic courts

of Badminton, Volleyball and lawn Tennis. There are separate

Snooker/Billiard, TT and Gymnasium facilities in the hostel

campuses of Boys and Girls.

— At the National level Inter college sports event at IIT

Roorkee (Sangram'17) our students performed well and

secured 2 Gold medals, 2 silver medals and one bronze

medal in weight lifting and athletics.

rd— At zonal level of 3 University Annual fest, sports fest was th

organized at ABESIT Ghaziabad (23-25 Jan., 2018), our teams excelled in the competitions and secured 16 Gold medals, 34 Silver medals and 2 Bronze medals

ABES Engineering College

Estd. 2000

11

International Conferences and Workshops: Faculty Development Program:

Sports & Athletic Activities

— A group of our students have founded a social venture by the name 'Help us to help the child' (HUHC), wherein 5 days a week they conduct literary camp for very poor children of the slum near Delhi/NCR. One centre of HUHC is currently operating in Pune, Maharashtra. Recently This NGO has completed its six glorious years.

— Another group of our students is working with NGO named “Make a Difference” and are engaged in various activities such as teaching English & mentoring the young men and women.

— We have a very strong Women Welfare and Grievance

Redressal Cell (WWGRC) active in the college. WWGC

has launched self-defense workshop 'Freedom from

fear' for girl students. In the present scenario, WWGRC is

trying to sensitize students/faculty members about

women-centric issues.

ABES College has been associated with many professional

societies and proving its existence almost each corner of the

country. — ABES Engineering College is Life member of

Institution of Engineers (IEI)— Student chapter of Institution of Communication

Engineers and Information Technologists (ICEIT) — Association for Computing Machinery (ACM)— Computer Society of India (CSI)— Institute of Electrical and Electronics Engineers

(IEEE) — The Institution of Engineers (IEI) and faculty

chapter of Indian Society for Technical Education (ISTE)

— Indian Green Building Council (IGBC)

— ABES Alumni Association (AAA) was founded in 2007 with the objective to promote and foster mutually beneficial interaction between the Alumni and the present students of the ABES Engineering College. All students, on passing out, become members of the alumni association. AAA has a strong member base of 8650 at the end of academic session 2016-17.

— Our Alumni are the Brand Ambassadors of ABESEC on various platforms

— Our alumni are placed in top class organizations like Facebook, TCS, Infosys, Videocon, Samsung, IBM, Wipro, Assochem etc.

— There has been immense contribution of the alumni towards career enhancement of ABES EC Students

— Alma Connect, a network for connecting Alumni of ABES Engineering College, is an incredibly special social networking platform and has many great features which would help our alumni and current students to getting in touch with one another.

At end I would like to say that, our endeavor has only just begun. The time has arrived where ABES Engineering College, will illuminate the entire world with the great light of hope. With deepest respect, I offer my profound gratitude and appreciation to Mr. Ved Prakash Goel for his vision to start an institution of Technocrats. I am also grateful to Hon'ble vice chancellor of Dr. A.P.J. Abdul Kalam Technical University, U.P. Lucknow, and Chief Guest for their benign presence.

I am also thankful to all the Members of the Board of

Governor and Executive Council of the Institute as well as to

all the Department Heads. I acknowledge with gratitude, the

cooperation and support extended by all the faculty and staff

members of the Institute throughout the year.

It is my ardent hope that ABES Engineering College,

Ghaziabad, will shine with utmost brilliance while creating

values in many lives. I urge each one of you to please advance

in each venture of your life and help our institution to expand

into an even stronger organization. My greatest joy is to see

the lives of my students receiving great benefits and be

brimming with happiness.

In conclusion I extend my heartiest congratulations and best

wishes all the graduating students who are here to receive

their degrees and awards on 13th convocation on this 18th

day of February 2018. The nation and ABES Engineering

College expect you to lead the way in transforming India from

a developing country into one of the best developed

countries of the Twenty First century.

I earnestly pray for your great success and bright future. May

you all succeed in achieving your dreams and aspirations.

12ABES Engineering College

Registered NGOs:

Professional Societies:

Alumni

Conclusion

JAI HIND

13thConvocation

F e b r u a r y 1 8 , 2 0 1 8