MakitaPowerToolsSA

makita.co.za

Offer valid from 1st April to 31st May 2018, while stocks last

Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.

• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.

• Tools are not supplied with drill bits, discs, etc. unless otherwise stated.

• The above tools shown are suitable for industrial applications unless otherwise stated.

• Models shown in this brochure are a representation only and not to scale.

• Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE).

• Prices applicable while current stocks last. • Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated.

• Terms & Conditions apply.

Offer valid from 1st April to 31st May 2018. While stocks last (Stock levels have been based

on previous demand)

STA

ND

ARD

DU

TY IN

DU

STRIA

L TO

OLS

OU

TDO

OR P

OW

ER E

QU

IPM

ENT

Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.

• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 14% unless otherwise stated. • Terms & Conditions apply.

ContinuousInnovation

Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.

• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.

Offer valid from 1st April to the 31st May 2018, while stocks last.

CHOICESMART

Deals

R5,499

TWIN CORDLESS ROTARY HAMMER 3.0 Joules - SDS+

DHR263ZK

• Capacities: Concrete: 26mm, Steel: 13mm Wood: 32mm• No Load Speed (r/min): 0 - 1,200• Impacts per minute (i/min): 0 - 4,800

3 Operation modes: Hammering, hammering with rotation and rotation only

Batteries & charger NOT included

With carry case

R3,299

CORDLESS CIRCULAR SAW with TCT Saw Blade

DSS610ZK

• Blade Dia: 165mm• Bore Size: 20mm• Max Cutting Capacity: At 0° - 57mm At 45° - 40mm At 50° - 36mm• No Load Speed (r/min): 3,700

Lightweight and compact design

Batteries & charger NOT included

With carry case

DSP600ZJTWIN BATTERY CORDLESS PLUNGE CUT CIRCULAR SAW WITH 1.4M RAIL

• Blade Dia: 165mm• Cutting Capacity: At 90°: 56mm: At 45°: 40mm• No Load Speed (r/min):

2,000 - 6,300

Powered by two 18V Li-Ion Batteries in series. With TCT Saw BladeWith systainer case

Automatic Torque Drive increases torque to power through any cut. Variable speed with soft start and electric brake

Batteries & charger NOT included

R9,999 R3,299

DHR202ZK

Batteries & charger NOT included

CORDLESS ROTARY HAMMER3 Operation modes. Hammering, hammering with rotation and rotation only.Lightweight . SDS+

With carry case• Capacities:

Concrete: 20mm, Steel: 13mm, Wood: 26mm• No Load Speed (r/min): 0 - 1,100• Impacts per minute: 0 - 4,000

CORDLESS GRASS TRIMMER Standard with Nylon Cutting Head

CORDLESS GRASS TRIMMER Standard with Nylon Cutting Head

DUR187LZ

DUR365UZ

BL Motor located at trimmer head forimproved balance and functionality withno loss of mechanical power

Direct drive system featuring Outer Rotor brushless motor

Multifunctional control panel for operating main/variable speed control/reversing switches

Batteries & charger NOT included

Batteries & charger NOT included

• Spindle Size: M8 x 1.25RH• Sound Power Level: 84dB(A)• No Load Speed (r/min): 3,500 - 6,000

• Spindle Size: M10 x 1.25LH• Sound Power Level: 86dB(A)• No Load Speed (r/min): 3,500 / 5,500 / 6,500

R3,549

R1,649

R3,799

R5,999

CORDLESS GRASS TRIMMER Powered by Twin 18V Li-Ion Batteries in series

DUR364LZ

High power and more work amount

Batteries & charger NOT included

• Spindle Size: M8 x 1.25RH• Sound Power Level: 92dB(A)• No Load Speed (r/min): 5,000 - 6,500

• Blade Length: 650mm• Strokes (s/min): 2,000 - 3,600

R5,499

Offer valid from 1st April to 31st May 2018, while stocks last

R879

ANGLE GRINDER ANGLE GRINDER

M9507B

M0801B

M8701B

M9200B

M6501B

M8600B

M0921B

• Wheel Dia: 115mm• No Load Speed (r/min): 11,000

2,200W720W

Heavy-duty motor• Wheel Dia: 230mm• No Load Speed (r/min): 6,600

Variable speed control • Capacity: Concrete: 16mm, Steel: 13mm, Wood: 20mm• Blows per minute (b/min): 0 - 48,000• No Load Speed (r/min): 0 - 3,200

With Carry Case• Capacity:

Concrete: 26mm, Steel: 13mm, Wood: 32• Blows per minute (b/min): 4,500• No Load Speed (r/min): 1,200

Extremely versatile sander• Pad Size: 112 x 102mm• Abrasive Paper Size:

114 x 140mm• Orbits Per Minute (o/min): 14,000

Compact body for superior handling• Capacity: Steel: 6.5mm, Wood: 9mm• No Load Speed (r/min): 0 - 4,500

With Carry Case• Impacts per Minute (i/min): 2,900• Impact Energy: 7.2J

500W

800W

180W

230W

13mm IMPACT DRILL

26mm ROTARY HAMMER2.3 Joules - SDS+3 Operation modes: Hammering, hammering with rotation and rotation only

FINISHING SANDER

6.5mm HIGH SPEED DRILL

CHIPPING HAMMER17mm Hex Shank

R829

R799

R749

R2,449

R1,099

R1,699

R2,899

R1,899

900W

M9203B

With built-in Dust Extraction System• Pad Size: 92x185mm • Abrasive Paper Size: 93x228mm• Orbits per minute (o/min): 12,000• Strokes per minute (s/min): 24,000 • Orbit Diameter: 2.0mm

190W

FINISHING SANDER (1/3 sheet)

M1901B

• Wheel Dia: 355mm• No Load Speed (r/min): 3,800

POWER PLANER

CUT OFF SAW

M2401B

500W

2000W

M3601B

• Collet Capacity: 6.35mm • Plunge Capacity: 0 - 35mm• No Load Speed (r/min): 27,000

PLUNGE TYPE ROUTER

900W

• Planing Width: 82mm • Planing Depth: 2mm• No Load Speed (r/min): 16,000

NEW

NEW

CORD

LESS

TO

OLS

Batteries & charger NOT included

R5,499

DUH651Z

Two 18V LXT Li-ion batteries deliver the power and performance for corded demands without leaving the 18V LXT plataform. High manoeuvrability and environment friendly

CORDLESS HEDGE TRIMMER

Automatic torque Drive Technology

Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.

• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.

Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.

• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.

Offer valid from 1st April to 31st May 2018, while stocks lastOffer valid from 1st April to 31st May 2018, while stocks last

Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.

• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.

WO

OD

WO

RKIN

G

DRI

LLS,

HA

MM

ERS,

BRE

AK

ER A

ND

CH

ASE

R DS4012 DS4012

DS4012 DS4012

GRI

ND

ERS

CONTINUOUS INNOVATIONCONTINUOUS INNOVATION

18V BATTERY

22 minute charge time with DC18RC. With built-in battery fuel gauge.

BL1830B 3.0Ah

BL1850B 5.0Ah

18V BATTERY

45 minute charge time with DC18RC. With built-in battery fuel gauge.

BL1860B 6.0Ah

18V BATTERY

55 minute charge time with DC18RC. With built-in battery fuel gauge.

DC18RC

ADP05

FAST CHARGERFast charger-charges ALL 18V Li-Ion Makita Batteries.

Charges or supplies power to smart phones, tablets, etc.

2USB output ports with caps.

ADAPTORFOR USB

R419

R1,099

R1,149

R1,579

R1,999

R2,699

R2,999

R2,999 R3,799

R2,199

R4,249R2,399 R2,899

R8,499

R9,799

DTD153ZJ

DHP458ZK

DJV180ZK

DBO180Z

HP2050 HR2300

HR4002 HM1203C

DGA456ZJCORDLESS IMPACT DRIVERWith systainer case CORDLESS ANGLE

GRINDER With systainer case• Machine Screw: M4 - M8

• Standard Bolt: M5 - M16• High Tensile Bolt: M5 -M14• Course Thread (screw): 22 - 125mm• Hex Shank: 6.35mm• Max. Fastening Torque: 170Nm• Impact per minute (i/min): 0 - 3,600• No Load Speed (r/min): 0 - 3,400

• Max Capacity (dia): Depressed Centre Wheel: 115mm Abrasive disc: 115mm Diamond Wheel: 115mm• No Load Speed (r/min): 8,500

NEWNEW

CORDLESS IMPACT DRIVER DRILL

CORDLESS PLANER

Extremely compact tool size.With carry case

• Capacities: Steel: 13mm, Wood: 76mm, Masonry: 16mm

• Impacts per minute: Hi: 0 - 30,000, Low: 0 - 6,000• No Load Speed (r/min): Hi: 0 - 2,000, Low: 0 - 400• Max Torque: Hard: 91Nm, Soft: 58Nm

• Planing Width: 82mm• Max Planing Depth: 2.0mm• No Load Speed (r/min):

14,000

Batteries & charger NOT included

Batteries & charger NOT included

* With optional #B-16L Blade

Batteries & charger NOT included

Batteries & charger NOT included

Excellent performance with high orbital speeds.• Pad Diameter: 123mm• Abrasive Disc Diameter: 125mm• Orbits per min: 7,000/9,500/11,000

CORDLESS RANDOM ORBIT SANDER

High accuracy and efficiencyWith carry case

• Length of stroke: 26mm• Max Capacities:

Steel: 10mm *Wood: 135mm Aluminium: 20mm• Strokes per minute: 0 - 2,600

CORDLESS JIG SAW

IMPACT DRILL 13mm Gear ChuckCompact body with durable metal gear housing. 2 Speed var. & rev.

With carry case• Drilling Capacities:

Concrete: 20mm, Steel: Hi: 8mm, Low: 13mm Wood: Hi: 25mm, Low: 40mm• Impacts per minute:

Hi: 0 - 58,000, Low: 0 - 24,000• No Load Speed (r/min):

Hi: 0 - 2,900, Low: 0 - 1,200

720W720W

ROTARY HAMMER2.3 JOULES - SDS+ 2 Operation modes: Hammering with rotation, rotation only.

ROTARY HAMMER6.2 Joules - SDS max 2 Operation modes: Hammering with rotation, hammering only.High speed for high work efficiency.

DEMOLITION HAMMER25.5 Joules - SDS max shank

With carry case• Capacities:

Concrete: 23mm, Steel: 13mm, Wood: 32mm• Blows per minute: 0 - 4,600• No Load Speed (r/min): 0 - 1,200

With carry case• Capacities:

Concrete: With TCT Bit: 40mm, • Blows per minute: 2,500• No Load Speed (r/min): 680

With carry case High durability and excellent demoli-tion performance.• Blows per minute: 950 - 1,900

1,050W

1,510W

R8,999

SG1251JDOUBLE BLADE WALL CHASER125mm 2 blades included

With carry case• Blade Dia: 125mm• Bore Size: 22.23mm• Cutting Depth: 0 - 30mm• Possible Adjustment of cutting width: 6 - 30mm• No Load Speed (r/min): 10,000

1,400W

R1,199

9557HNGANGLE GRINDERHigh performance motor

• Wheel Dia.: 115mm• No Load Speed (r/min): 11,000

840W

With carry case• Nail Length: 15mm - 50 mm • Gauge: 18Ga• Magazine Capacity: 100pcs• Operating Air Pressure: 60 - 115PSI

Without Dust BagHigh output air volume• Air volume: 4.1m3/min • Air Pressure: 5.7kPa• No Load Speed (r/min): 16,000

With carry case• Length of Stroke: 18mm• Max. Cutting Capacities:In wood: 65mm, In steel: 6mm• Strokes (p/min): 500 - 3,100

9403 Belt Sander

RP1800X Plunge Type Router

PJ7000 Biscuit Joiner With carry case

BO6030 Random Orbit Sander

SP6000J Plunge Cut Circular Saw

N5900B Wood Cutting Saw

HS0600 Wood Cutting Saw

4329K Jig Saw

UB1102Z Blower

AF505 18 Gauge Pneumatic Brad Nailer- F Type

LS1018L Double Slide CompoundSaw with TCT Woodcutting Blade

Powerful motor for high production use• Belt Size: 100mm x 610mm • Belt Speed: 500 m/min

Ergonmically contoured handles for comfortable operation• Collet Capacity: 12.7mm • Plunge Capacity: 0 - 70mm• No Load Speed (r/min): 22,000

A hard working saw with the power to rip through most materials• Blade Dia: 235mm • Bore Size: 30mm• Max. Cutting Capacities: At 0° - 85mm, At 45°- 60mm, At 50° - 53mm• No Load Speed (r/min): 4,100

Enables single - pass cutting of 4x materials• Blade Dia: 260 - 270mm• Max. Cutting Capacities: At 0° - 97mm, At 45°- 69mm• No Load Speed (r/min): 4,100

New compact and lightweight design• Blade Dia: 100mm • No Load Speed (r/min): 11,000

1

2

3

4

5

6

7

8

9

10

11

Exceptionally low vibration, yet aggressive sanding• Pad dia: 150mm • Abrasive disc dia: 150mm• Orbits per min (o/min): 4,000 - 10,000

With systainer caseSupplied with: 1.4m Rail and 2 x clamps• Blade Dia: 165mm • Bore Size: 20mm• Max. Cutting Capacities:At 0° - 56mm, At 45°- 40mm, At 48° - 38mm• No Load Speed (r/min): 2,000 - 5,800

• Blade Dia: 255 - 260mm • Bore Size: 30mm• Max. Cutting Capacities: At 0° - 91mm x 305mm At 45°- 91mm x 215mm with 255mm blade• No Load Speed (r/min): 4,300

R3,999

3

R3,299

Standard with blade part no. A-89866

6

R5,599

1,200W

1

R6,199

1,850W

R3,699

310W

5 Standard with blade part no. B-07353

R7,999

1,300W

R1,499

9

R4,799

Standard with blade part no. B-12859

7

2,000W

R8,699

Standard with blade part no. JM23100005

1,430W8

R1,499

10

R1,099600W

11

2

Standard with blade part no. B-20644

4

GA9050ANGLE GRINDERExtra slim design with “deadman’s” switch. Most compact in its class.

• Wheel Dia: 230mm• Wire cup brush: 110mm max• No Load Speed (r/min): 6,600

R2,179

2,000W

DKP180Z

Batteries & charger NOT included

Batteries & charger NOT included

R25,999

ELECTRIC BREAKERwithout AVT - 71.4 Joules

Highest-in-class demolition power• Hex Shank: 28.6mm• Blows per minute: 870

2,000W

HM1802

CHOICESMART

DealsCHOICESMART

Deals

2,000W

CORD

LESS

TO

OLS

Automatic torque Drive Technology

Active Feedback sensing Technology

Dust extraction sold separately

450W

701W

BatteryFuel

Gauge