MakitaPowerToolsSA
makita.co.za
Offer valid from 1st April to 31st May 2018, while stocks last
Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.
• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.
• Tools are not supplied with drill bits, discs, etc. unless otherwise stated.
• The above tools shown are suitable for industrial applications unless otherwise stated.
• Models shown in this brochure are a representation only and not to scale.
• Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE).
• Prices applicable while current stocks last. • Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated.
• Terms & Conditions apply.
Offer valid from 1st April to 31st May 2018. While stocks last (Stock levels have been based
on previous demand)
STA
ND
ARD
DU
TY IN
DU
STRIA
L TO
OLS
OU
TDO
OR P
OW
ER E
QU
IPM
ENT
Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.
• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 14% unless otherwise stated. • Terms & Conditions apply.
ContinuousInnovation
Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.
• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.
Offer valid from 1st April to the 31st May 2018, while stocks last.
CHOICESMART
Deals
R5,499
TWIN CORDLESS ROTARY HAMMER 3.0 Joules - SDS+
DHR263ZK
• Capacities: Concrete: 26mm, Steel: 13mm Wood: 32mm• No Load Speed (r/min): 0 - 1,200• Impacts per minute (i/min): 0 - 4,800
3 Operation modes: Hammering, hammering with rotation and rotation only
Batteries & charger NOT included
With carry case
R3,299
CORDLESS CIRCULAR SAW with TCT Saw Blade
DSS610ZK
• Blade Dia: 165mm• Bore Size: 20mm• Max Cutting Capacity: At 0° - 57mm At 45° - 40mm At 50° - 36mm• No Load Speed (r/min): 3,700
Lightweight and compact design
Batteries & charger NOT included
With carry case
DSP600ZJTWIN BATTERY CORDLESS PLUNGE CUT CIRCULAR SAW WITH 1.4M RAIL
• Blade Dia: 165mm• Cutting Capacity: At 90°: 56mm: At 45°: 40mm• No Load Speed (r/min):
2,000 - 6,300
Powered by two 18V Li-Ion Batteries in series. With TCT Saw BladeWith systainer case
Automatic Torque Drive increases torque to power through any cut. Variable speed with soft start and electric brake
Batteries & charger NOT included
R9,999 R3,299
DHR202ZK
Batteries & charger NOT included
CORDLESS ROTARY HAMMER3 Operation modes. Hammering, hammering with rotation and rotation only.Lightweight . SDS+
With carry case• Capacities:
Concrete: 20mm, Steel: 13mm, Wood: 26mm• No Load Speed (r/min): 0 - 1,100• Impacts per minute: 0 - 4,000
CORDLESS GRASS TRIMMER Standard with Nylon Cutting Head
CORDLESS GRASS TRIMMER Standard with Nylon Cutting Head
DUR187LZ
DUR365UZ
BL Motor located at trimmer head forimproved balance and functionality withno loss of mechanical power
Direct drive system featuring Outer Rotor brushless motor
Multifunctional control panel for operating main/variable speed control/reversing switches
Batteries & charger NOT included
Batteries & charger NOT included
• Spindle Size: M8 x 1.25RH• Sound Power Level: 84dB(A)• No Load Speed (r/min): 3,500 - 6,000
• Spindle Size: M10 x 1.25LH• Sound Power Level: 86dB(A)• No Load Speed (r/min): 3,500 / 5,500 / 6,500
R3,549
R1,649
R3,799
R5,999
CORDLESS GRASS TRIMMER Powered by Twin 18V Li-Ion Batteries in series
DUR364LZ
High power and more work amount
Batteries & charger NOT included
• Spindle Size: M8 x 1.25RH• Sound Power Level: 92dB(A)• No Load Speed (r/min): 5,000 - 6,500
• Blade Length: 650mm• Strokes (s/min): 2,000 - 3,600
R5,499
Offer valid from 1st April to 31st May 2018, while stocks last
R879
ANGLE GRINDER ANGLE GRINDER
M9507B
M0801B
M8701B
M9200B
M6501B
M8600B
M0921B
• Wheel Dia: 115mm• No Load Speed (r/min): 11,000
2,200W720W
Heavy-duty motor• Wheel Dia: 230mm• No Load Speed (r/min): 6,600
Variable speed control • Capacity: Concrete: 16mm, Steel: 13mm, Wood: 20mm• Blows per minute (b/min): 0 - 48,000• No Load Speed (r/min): 0 - 3,200
With Carry Case• Capacity:
Concrete: 26mm, Steel: 13mm, Wood: 32• Blows per minute (b/min): 4,500• No Load Speed (r/min): 1,200
Extremely versatile sander• Pad Size: 112 x 102mm• Abrasive Paper Size:
114 x 140mm• Orbits Per Minute (o/min): 14,000
Compact body for superior handling• Capacity: Steel: 6.5mm, Wood: 9mm• No Load Speed (r/min): 0 - 4,500
With Carry Case• Impacts per Minute (i/min): 2,900• Impact Energy: 7.2J
500W
800W
180W
230W
13mm IMPACT DRILL
26mm ROTARY HAMMER2.3 Joules - SDS+3 Operation modes: Hammering, hammering with rotation and rotation only
FINISHING SANDER
6.5mm HIGH SPEED DRILL
CHIPPING HAMMER17mm Hex Shank
R829
R799
R749
R2,449
R1,099
R1,699
R2,899
R1,899
900W
M9203B
With built-in Dust Extraction System• Pad Size: 92x185mm • Abrasive Paper Size: 93x228mm• Orbits per minute (o/min): 12,000• Strokes per minute (s/min): 24,000 • Orbit Diameter: 2.0mm
190W
FINISHING SANDER (1/3 sheet)
M1901B
• Wheel Dia: 355mm• No Load Speed (r/min): 3,800
POWER PLANER
CUT OFF SAW
M2401B
500W
2000W
M3601B
• Collet Capacity: 6.35mm • Plunge Capacity: 0 - 35mm• No Load Speed (r/min): 27,000
PLUNGE TYPE ROUTER
900W
• Planing Width: 82mm • Planing Depth: 2mm• No Load Speed (r/min): 16,000
NEW
NEW
CORD
LESS
TO
OLS
Batteries & charger NOT included
R5,499
DUH651Z
Two 18V LXT Li-ion batteries deliver the power and performance for corded demands without leaving the 18V LXT plataform. High manoeuvrability and environment friendly
CORDLESS HEDGE TRIMMER
Automatic torque Drive Technology
Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.
• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.
Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.
• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.
Offer valid from 1st April to 31st May 2018, while stocks lastOffer valid from 1st April to 31st May 2018, while stocks last
Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.
• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.
WO
OD
WO
RKIN
G
DRI
LLS,
HA
MM
ERS,
BRE
AK
ER A
ND
CH
ASE
R DS4012 DS4012
DS4012 DS4012
GRI
ND
ERS
CONTINUOUS INNOVATIONCONTINUOUS INNOVATION
18V BATTERY
22 minute charge time with DC18RC. With built-in battery fuel gauge.
BL1830B 3.0Ah
BL1850B 5.0Ah
18V BATTERY
45 minute charge time with DC18RC. With built-in battery fuel gauge.
BL1860B 6.0Ah
18V BATTERY
55 minute charge time with DC18RC. With built-in battery fuel gauge.
DC18RC
ADP05
FAST CHARGERFast charger-charges ALL 18V Li-Ion Makita Batteries.
Charges or supplies power to smart phones, tablets, etc.
2USB output ports with caps.
ADAPTORFOR USB
R419
R1,099
R1,149
R1,579
R1,999
R2,699
R2,999
R2,999 R3,799
R2,199
R4,249R2,399 R2,899
R8,499
R9,799
DTD153ZJ
DHP458ZK
DJV180ZK
DBO180Z
HP2050 HR2300
HR4002 HM1203C
DGA456ZJCORDLESS IMPACT DRIVERWith systainer case CORDLESS ANGLE
GRINDER With systainer case• Machine Screw: M4 - M8
• Standard Bolt: M5 - M16• High Tensile Bolt: M5 -M14• Course Thread (screw): 22 - 125mm• Hex Shank: 6.35mm• Max. Fastening Torque: 170Nm• Impact per minute (i/min): 0 - 3,600• No Load Speed (r/min): 0 - 3,400
• Max Capacity (dia): Depressed Centre Wheel: 115mm Abrasive disc: 115mm Diamond Wheel: 115mm• No Load Speed (r/min): 8,500
NEWNEW
CORDLESS IMPACT DRIVER DRILL
CORDLESS PLANER
Extremely compact tool size.With carry case
• Capacities: Steel: 13mm, Wood: 76mm, Masonry: 16mm
• Impacts per minute: Hi: 0 - 30,000, Low: 0 - 6,000• No Load Speed (r/min): Hi: 0 - 2,000, Low: 0 - 400• Max Torque: Hard: 91Nm, Soft: 58Nm
• Planing Width: 82mm• Max Planing Depth: 2.0mm• No Load Speed (r/min):
14,000
Batteries & charger NOT included
Batteries & charger NOT included
* With optional #B-16L Blade
Batteries & charger NOT included
Batteries & charger NOT included
Excellent performance with high orbital speeds.• Pad Diameter: 123mm• Abrasive Disc Diameter: 125mm• Orbits per min: 7,000/9,500/11,000
CORDLESS RANDOM ORBIT SANDER
High accuracy and efficiencyWith carry case
• Length of stroke: 26mm• Max Capacities:
Steel: 10mm *Wood: 135mm Aluminium: 20mm• Strokes per minute: 0 - 2,600
CORDLESS JIG SAW
IMPACT DRILL 13mm Gear ChuckCompact body with durable metal gear housing. 2 Speed var. & rev.
With carry case• Drilling Capacities:
Concrete: 20mm, Steel: Hi: 8mm, Low: 13mm Wood: Hi: 25mm, Low: 40mm• Impacts per minute:
Hi: 0 - 58,000, Low: 0 - 24,000• No Load Speed (r/min):
Hi: 0 - 2,900, Low: 0 - 1,200
720W720W
ROTARY HAMMER2.3 JOULES - SDS+ 2 Operation modes: Hammering with rotation, rotation only.
ROTARY HAMMER6.2 Joules - SDS max 2 Operation modes: Hammering with rotation, hammering only.High speed for high work efficiency.
DEMOLITION HAMMER25.5 Joules - SDS max shank
With carry case• Capacities:
Concrete: 23mm, Steel: 13mm, Wood: 32mm• Blows per minute: 0 - 4,600• No Load Speed (r/min): 0 - 1,200
With carry case• Capacities:
Concrete: With TCT Bit: 40mm, • Blows per minute: 2,500• No Load Speed (r/min): 680
With carry case High durability and excellent demoli-tion performance.• Blows per minute: 950 - 1,900
1,050W
1,510W
R8,999
SG1251JDOUBLE BLADE WALL CHASER125mm 2 blades included
With carry case• Blade Dia: 125mm• Bore Size: 22.23mm• Cutting Depth: 0 - 30mm• Possible Adjustment of cutting width: 6 - 30mm• No Load Speed (r/min): 10,000
1,400W
R1,199
9557HNGANGLE GRINDERHigh performance motor
• Wheel Dia.: 115mm• No Load Speed (r/min): 11,000
840W
With carry case• Nail Length: 15mm - 50 mm • Gauge: 18Ga• Magazine Capacity: 100pcs• Operating Air Pressure: 60 - 115PSI
Without Dust BagHigh output air volume• Air volume: 4.1m3/min • Air Pressure: 5.7kPa• No Load Speed (r/min): 16,000
With carry case• Length of Stroke: 18mm• Max. Cutting Capacities:In wood: 65mm, In steel: 6mm• Strokes (p/min): 500 - 3,100
9403 Belt Sander
RP1800X Plunge Type Router
PJ7000 Biscuit Joiner With carry case
BO6030 Random Orbit Sander
SP6000J Plunge Cut Circular Saw
N5900B Wood Cutting Saw
HS0600 Wood Cutting Saw
4329K Jig Saw
UB1102Z Blower
AF505 18 Gauge Pneumatic Brad Nailer- F Type
LS1018L Double Slide CompoundSaw with TCT Woodcutting Blade
Powerful motor for high production use• Belt Size: 100mm x 610mm • Belt Speed: 500 m/min
Ergonmically contoured handles for comfortable operation• Collet Capacity: 12.7mm • Plunge Capacity: 0 - 70mm• No Load Speed (r/min): 22,000
A hard working saw with the power to rip through most materials• Blade Dia: 235mm • Bore Size: 30mm• Max. Cutting Capacities: At 0° - 85mm, At 45°- 60mm, At 50° - 53mm• No Load Speed (r/min): 4,100
Enables single - pass cutting of 4x materials• Blade Dia: 260 - 270mm• Max. Cutting Capacities: At 0° - 97mm, At 45°- 69mm• No Load Speed (r/min): 4,100
New compact and lightweight design• Blade Dia: 100mm • No Load Speed (r/min): 11,000
1
2
3
4
5
6
7
8
9
10
11
Exceptionally low vibration, yet aggressive sanding• Pad dia: 150mm • Abrasive disc dia: 150mm• Orbits per min (o/min): 4,000 - 10,000
With systainer caseSupplied with: 1.4m Rail and 2 x clamps• Blade Dia: 165mm • Bore Size: 20mm• Max. Cutting Capacities:At 0° - 56mm, At 45°- 40mm, At 48° - 38mm• No Load Speed (r/min): 2,000 - 5,800
• Blade Dia: 255 - 260mm • Bore Size: 30mm• Max. Cutting Capacities: At 0° - 91mm x 305mm At 45°- 91mm x 215mm with 255mm blade• No Load Speed (r/min): 4,300
R3,999
3
R3,299
Standard with blade part no. A-89866
6
R5,599
1,200W
1
R6,199
1,850W
R3,699
310W
5 Standard with blade part no. B-07353
R7,999
1,300W
R1,499
9
R4,799
Standard with blade part no. B-12859
7
2,000W
R8,699
Standard with blade part no. JM23100005
1,430W8
R1,499
10
R1,099600W
11
2
Standard with blade part no. B-20644
4
GA9050ANGLE GRINDERExtra slim design with “deadman’s” switch. Most compact in its class.
• Wheel Dia: 230mm• Wire cup brush: 110mm max• No Load Speed (r/min): 6,600
R2,179
2,000W
DKP180Z
Batteries & charger NOT included
Batteries & charger NOT included
R25,999
ELECTRIC BREAKERwithout AVT - 71.4 Joules
Highest-in-class demolition power• Hex Shank: 28.6mm• Blows per minute: 870
2,000W
HM1802
CHOICESMART
DealsCHOICESMART
Deals
2,000W
CORD
LESS
TO
OLS
Automatic torque Drive Technology
Active Feedback sensing Technology
Dust extraction sold separately
450W
701W
BatteryFuel
Gauge