Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
10
1
2
6-4 Toronto, Edmonton, Saskatoon, Vancouver, Montreal
9
6
7
5
3
4
8
Webster S Series Immersible Pumps
CORROSION RESISTANT PUMPS
These rugged, chemical duty pumps are available in CPVC (Corzan®), fiberglass reinforced Polypropylene, and PVDF. Precision moulded, dynamically balanced, “enclosed” impellers allow pumping of abrasive solutions and operating against closed discharge valves. The pump is quickly and easily serviced since the body stays in-line while the pump core is removed. Optimum chemical resistance is provided with your choice of CPVC (Corzan®) or Fiberglass Reinforced Polypropylene construction. Washdown and Explosion-proof motors are available as well as inlet screens & extended shafts. Viton® “O” ring end cover seal allows for mounting in liquid, or with inlet extension.
Applications:Pumping for aeration, agitation, filtration, recirculation, spraying, transfer in the following industries:• Plating• Electronics• Photo processing• Pollution control• Chemical processing• Water treatment
Features:• Seal-less vertical pump• Virtually maintenance-free• HP: 1/15, 1/3, 1/2, 3/4, 1 and 1-1/2• Two-Year Warranty• No metal in contact with fluid being
pumped• Seal-less design eliminates leaking,
costly seal replacement and down time• Non-overloading, continuous duty
totally enclosed motors• Teflon® fume barrier protects motor
end bell & bearings from corrosion caused by vapor or fumes
ITEM NUMBER MATERIAL H.P. VOLTS PHASE
(FNPT) SUCTION
(MNPT) DIS-
CHARGE1S1GX0008 CPVC 1/15 115 1 3/4" 1/2"1S2GX0008 CPVC 1/3 115/230 1 1" 3/4"1S2HX0008 CPVC 1/3 208-230/575 3 1" 3/4"1S4GX0008 CPVC 1/2 115/230 1 1 1/4" 1"1S4HX0008 CPVC 3/4 208-230/575 3 1 1/4" 1"1S5GX0008 CPVC 3/4 115/230 1 1 1/4" 1"1SS6GX008 CPVC 3/4 115/230 1 1 1/2" 1 1/4"1SS6HX008 CPVC 3/4 208-230/575 3 1 1/2" 1 1/4"1S5HX0008 CPVC 1 208-230/575 3 1 1/4" 1"1SS7GX008 CPVC 1 115/230 1 1 1/2" 1 1/4"1SS7HX008 CPVC 1 208-230/575 3 1 1/2" 1 1/4"1S8GX0008 CPVC 1 1/2 115/230 1 1 1/2" 1 1/4"1S8HX0008 CPVC 1 1/2 208-230/575 3 1 1/2" 1 1/4"1S1GX0006 PP 1/15 115 1 3/4" 1/2"1S2GX0003 FRPP 1/3 115/230 1 1" 3/4"1S2HX0003 FRPP 1/3 208-230/575 3 1" 3/4"1S4GX0003 FRPP 1/2 115/230 1 1 1/4" 1"1S5GX0003 FRPP 3/4 115/230 1 1 1/4" 1"1SS6GX003 FRPP 3/4 115/230 1 1 1/2" 1 1/4"1SS6HX003 FRPP 3/4 208-230/575 3 1 1/2" 1 1/4"1S4HX0003 FRPP 3/4 208-230/575 3 1 1/4" 1"1SS7GX003 FRPP 1 115/230 1 1 1/2" 1 1/4"1SS7HX003 FRPP 1 208-230/575 3 1 1/2" 1 1/4"1S5HX0003 FRPP 1 208-230/575 3 1 1/4" 1"1S8GX0003 FRPP 1 1/2 115/230 1 1 1/2" 1 1/4"1S8HX0003 FRPP 1 1/2 208-230/575 3 1 1/2" 1 1/4"1S1GX0009 PVDF 1/15 115 1 3/4" 1/2"1S2GX0009 PVDF 1/3 115/230 1 1" 3/4"1S2HX0009 PVDF 1/3 208-230/575 3 1" 3/4"1S4GX0009 PVDF 1/2 115/230 1 1 1/4" 1"1S5GX0009 PVDF 3/4 115/230 1 1 1/4" 1"1SS6GX009 PVDF 3/4 115/230 1 1 1/2" 1 1/4"1SS6HX009 PVDF 3/4 208-230/460 3 1 1/2" 1 1/4"1S4HX0009 PVDF 3/4 208-230/460 3 1 1/4" 1"1SS7GX009 PVDF 1 115/230 1 1 1/2" 1 1/4"1S5HX0009 PVDF 1 208-230/575 3 1 1/4" 1"1S8GX0009 PVDF 1 1/2 115/230 1 1 1/2" 1 1/4"1S8HX0009 PVDF 1 1/2 208-230/575 3 1 1/2" 1 1/4"1SS7HX009 PVDF 1 1/2 208-230/575 3 1 1/2" 1 1/4"
10
2
1
www.fabcoplastics.com 6-5
9
6
7
5
3
4
8
Webster S12/S16 Immersible Pumps
CORROSION RESISTANT PUMPS
The S12 and S16 Series are rugged, chemical duty pumps available in CPVC (Corzan®). The precision moulded, dynamically balanced, enclosed impellers with unique “tandem” design allows for pumping of abrasive solutions, the ability to run dry indefinitely, and to operate against closed discharge valves. Available in ratings of 3 and 5 horsepower for continuous duty operation. The FPM o-ring end cover seal allows mounting in liquid These pumps come complete with non-overloading, continuous duty TEFC motors and include mounting bracket, discharge support and discharge piping to top of mounting bracket.
ITEM NUMBER MATERIAL H.P. VOLTS PHASE
(FNPT) SUCTION
(MNPT) DISCHARGE
SHIPPING WEIGHT
1SOHX0008 CPVC 3 208-230/575 3 3" SLIP 1 1/2" 751SOHX0100 CPVC 3 208-230/575 3 3" SLIP 1 1/2" 751S9HX0008 CPVC 5 208-230/575 3 3" SLIP 2" 135
Applications:Pumping for aeration, agitation, filtration, spraying, transfer in the following industries:• Electronics• Pollution control• Chemical processing• Water treatment
Features:• HP: 3 & 5 • CPVC (Corzan®) construction for
optimum chemical resistance • No metal in contact with fluid being
pumped • Seal-less design eliminates leaking,
costly seal replacement and downtime • FPM o-ring end cover seal allows
mounting in liquid • No pump bearings allows pump to run
dry • Includes mounting bracket, discharge
support & discharge piping
10
1
2
6-6 Toronto, Edmonton, Saskatoon, Vancouver, Montreal
9
6
7
5
3
4
8
CORROSION RESISTANT PUMPS
Webster C5/C7/C8/C10 Centrifugal PumpsThe C5, C7 and C8 Series pumps are designed specifically for continuous chemical duty service. They are rugged, precision molded, and feature dynamically balanced, enclosed impellers. Units are available in CPVC (Corzan®), fiberglass reinforced Polypropylene, and PVDF (Solef® ) with ratings of 1/3, 1, 1-1/2, 3 and 5 horsepower. The standard mechanical seal is a John Crane Type 21 single seal, carbon/ceramic. Other seal materials are available depending on the process fluid. Water-wash seals are available for especially aggressive or “crystallizing” liquids. Pump models are also available with a rugged cast iron bearing frame for belt-drive or other coupled drivers.
Applications:Pumping for aeration, agitation, filtration, recirculation, spraying, transfer in the following industries:• Plating• Electronics• Photo processing• Pollution control• Chemical processing• Water treatment
Features• No metal in contact with fluid being pumped • Viton seal elastomers and o-rings standard, EPDM
available 300 series stainless steel shaft with belt-drive or direct coupled drivers
• Dynamically balanced, enclosed impellers • Totally enclosed motors • Available with bearing frame for belt drive or direct
coupled driver
Webster S Series Quick Service PumpsThe S8 Series are rugged, chemical duty pumps available in CPVC (Corzan®). They are precision molded, dynamically balanced, and have “enclosed” impellers allowing pumping of abrasive solutions, and operation against closed discharge valves. The pump can handle flow rates up to 80GPM and up to 45 TDH. These pumps feature a special tear-drop locking design that allows the operator to quickly remove the pump core for service while the pump body stays connected to the piping system. Just loosen the four mounting bolts, turn the pump motor slightly and lift it out of the body for service. Spillage of the process media is eliminated because the pump body stays connected to the piping system.
PART NO. MATERIAL H.P. CYCLE (HZ) VOLTS PHASE INLET
(FNPT)OUTLET (MNPT)
SHIP WEIGHT
1SS6GX8 CPVC 3/4 50/60 115/230 1 1 1/2" 1 1/4" 50 Ibs1SS8HX8 CPVC 3/4 50/60 208-230/575 3 1 1/2" 1 1/4" 50 Ibs1SS7GX8 CPVC 1 50/60 115/230 1 1 1/2" 1 1/4" 51 Ibs1SS7HX8 CPVC 1 50/60 208-230/575 3 1 1/2" 1 1/4" 51 Ibs1SS8GX8 CPVC 1 1/2 50/60 115/230 1 1 1/2" 1 1/4" 52 Ibs1SS8HX8 CPVC 1 1/2 50/60 208-230/575 3 1 1/2" 1 1/4" 52 Ibs
Applications:Pumping for aeration, agitation, filtration, spraying, transfer in the following industries:• Electronics• Pollution control• Chemical processing• Water treatment
Features:• No metal in contact with fluid being pumped • Seal-less design eliminates leaking, costly seal replacement and down
time • FPM o-ring end cover seal allows mounting in liquid, or with inlet
extension • Non-overloading, continuous duty totally enclosed motors • Viton fume barrier protects motor end bell and bearings from
corrosion caused by vapor or fumes.
10
2
1
www.fabcoplastics.com 6-7
9
6
7
5
3
4
8
ITEM NUMBER MATERIAL H.P. VOLTS PHASE
(FNPT) SUCTION
(MNPT) DISCHARGE
1C5GX0200 CPVC 1/3 115/230 1 3/4" 1/2"1C5HX0200 CPVC 1/3 208-230/575 3 3/4" 1/2"1C7GX0400 CPVC 1 115/230 1 1" 3/4"1C7HX0400 CPVC 1 208-230/575 3 r 3/4"1C8GX0600 CPVC 1 1/2 115/230 1 1 1/4" 1"1C8HX0600 CPVC 1 1/2 208-230/575 3 1 1/4" 1"1C5GX0203 FRPP 1/3 115/230 1 3/4" 1/2"1C5HX0203 FRPP 1/3 208-230/575 3 3/4" 1/2"1C7GX0403 FRPP 1 115/230 1 1" 3/4"1C7HX0403 FRPP 1 208-230/575 3 1" 3/4"1C8GX0603 FRPP 1 1/2 115/230 1 1 1/4" 1"1C8HX0603 FRPP 1 1/2 208-230/575 3 1 1/4 1"1C1HX0500 FRPP 3 208-230/575 3 1 1/2 1"1C4HX0700 FRPP 5 208-230/575 3 1 1/2 1"1C5GX0209 PVDF 1/3 115/230 1 3/4" 1/2"1C5HX0209 PVDF 1/3 208-230/575 3 3/4" 1/2"1C7GX0409 PVDF 1 115/230 1 1" 3/4"1C7HX0409 PVDF 1 208-230/575 3 1" 3/4"1C8GX0609 PVDF 1 1/2 115/230 1 1 1/4" 1"1C8HX0609 PVDF 1 1/2 208-230/575 3 1 1/4" 1"
CORROSION RESISTANT PUMPS
10
1
2
6-8 Toronto, Edmonton, Saskatoon, Vancouver, Montreal
9
6
7
5
3
4
8
Webster D Series Immersible Pumps
CORROSION RESISTANT PUMPS
The D1 and DD1 are enhanced replacements for the durable SS1 series pump. The 1/8 HP motor with 1/2” diameter extended shaft and 4 precision machined pump mounting pads ensure trouble free performance for the more demanding industrial applications. This pump is precision moulded, dynamically balanced, and is constructed with semi-open impellers with a unique “tandem” design allowing for its ability to operate against closed discharge valves. It is available in your choice of CPVC (Corzan®), natural Polypropylene, or PVDF for optimum chemical resistance
ITEM NUMBER MATERIAL H.P. VOLTS PHASE (FNPT)
SUCTION(MNPT)
DISCHARGE1D1GX0008 CPVC 1/8 115/230 1 1" 1/2"1DD1GX008 CPVC 1/8 115/230 1 1" 1/2"1D1GX0006 PP 1/8 115/230 1 1" 1/2"1DD1GX006 PP 1/8 115/230 1 1" 1/2"1D1GX0009 PVDF 1/8 115/230 1 1" 1/2"1DD1GX009 PVDF 1/8 115/230 1 1" 1/2"
Features• Increased end bell motor
protection • Larger motor bearings than the
SS1 for tighter control • Improved capacitor protection • Seal-less design eliminates
leaking, costly seal replacement and downtime
• Viton® o-ring end cover seal allows mounting in liquid, or with inlet extension
• Non-overloading, continuous duty TEFC motors and body has Integral flange
10
2
1
www.fabcoplastics.com 6-9
9
6
7
5
3
4
8
Webster T Series Vertical Seal-less Immersible Pumps
CORROSION RESISTANT PUMPS
The new T Series Webster by Hayward thermoplastic pump features a single, non-coupled motor/impeller shaft with a proprietary patent-pending shaft seal. Compared to a pump with a coupled shaft and o-ring seal, the T Series design combines the multiple components into one thereby reducing the possibility of failure by components.The new shaft seal is made from PTFE allowing greater chemical compatibility and less wear due to degradation over time that would reduce pump performance. The shaft sleeve has also been extended to move the seal point up and away from the weep hole protecting the metal shaft as well as centralizing the sleeve. The new T Series is offered in CPVC as standard for the pump head assembly, with GFPP and PVDF as optional materials.
Features• Single, Non-Coupled Motor Shaft 303 SS• Proprietary, Patent-Pending PTFE Shaft
Seal• Extended Shaft SleeveMaterials• CPVC Cell Class 23447 per ASTM D1784• GFPP Cell Class 85580 per ASTM D4101• PVDF per ASTM D3222, IIBenefits• Solid, Stable One-Piece Shaft• Seal Point Away from Weep Hole• Less Vibration• Runs TrueApplications• Chemical Processing and Transfer• Metal Plating• Waste and Water Treatment• Mining• Aquatic and Animal Life Support
Systems• ElectronicsOptions• Optional Inlet Screen• In-Tank Filtration• Impeller Trim Variations• Explosion-Proof Motors• Wash-Down Motors• 575V Motors
AIN / MM
BIN / MM
CIN / MM
DIN / MM
EIN / MM
GIN / MM
HIN / MM
JIN / MM
KIN / MM
INLET DISCHARGE HP
T2 8.68 / 220
13.28 / 337
1.16 / 29
2.25 / 57
6.98 / 177
4.90 / 124
6.32 / 161
6.32 / 161
10.86 / 276
1” MNPT 1/2” FNPT 1/3
T4 9.19 / 233
12.90/ 328
1.38 / 35
2.88 / 70
6.98 / 177
4.90 / 124
6.32 / 161
6.32 / 161
9.77 / 248
1-1/4” MNPT 1” FNPT 1/2
T5 9.69 / 246
12.90 / 328
1.38 / 35
2.88 / 73
6.98 / 177
4.90 / 124
6.32 / 161
6.32 / 161
9.77 / 248
1-1/4” MNPT 1” FNPT 3/4
T6 9.69 / 246
11.40 / 290
1.69 / 43
3.21 / 82
6.98 / 177
4.90 / 124
6.32 / 161
6.32 / 161
7.97 / 202
1-1/2” MNPT 1-1/4” FNPT 1
T7 9.94 / 252
11.40 / 290
1.69 / 43
3.21 / 82
6.98 / 177
4.90 / 124
6.32 / 161
6.32 / 161
7.97 / 202
1-1/2” MNPT 1-1/4” FNPT 1
T8 10.44 / 265
11.40 / 290
1.69 / 43
3.21 / 82
6.98 / 177
4.90 / 124
6.32 / 161
6.32 / 161
7.97 / 202
1-1/2” MNPT 1-1/4” FNPT 1-1/2
PARTS LIST1. Motor and Shaft2. Impeller Seal (PTFE)3. Impeller4. Body5. End Cap O-Ring6. End Cap7. Retainer Clip
Note: Dimensions are subject to change without notice – consult FABCO for installation information.