CP-CL Compact I/O Modules

CP-CL.PSI.USProduct Short Information

The CP-CL Compact Line ofI/O Modules: Ideal for LightIndustrial ApplicationsFor use in combination with theSC valve terminal series, the CL series of I/O modules is theperfect complement for lightindustrial applications such aselectronics assembly, handling,and others.

CP-CL I/O modules are compatible with: • CP System (CP Fieldbus nodes,

CPV/CPA valve terminals)• CP Direct Link valve terminals

(CPV, CDVI, CP-SC, etc.)• CPX with CPI

Compact and DurableThe CP-CL series is size optimized(approx. 150 x 30 x 23 mm) somodules can get closer to sensors and actuators. The electronics are fully potted, andencased in plastic, so weight isminimized; and the IP class (upto IP65/67) offers the highestdegree of protection. The 8 position input modules with M8or M12 connectors are a streamlined alternative to the 16position CP aluminum modules.A 16 position CL module is also available for cabinet applications,with cage clamp terminals.

ApplicationsThe modules are most suited forthe following industry segments,but can be used in any application requiring digital I/O :• Packaging & Assembly

Machines• Back End Semiconductor,

Electronics Assembly• Light Assembly and Handling

For more information: www.festo.com/us/cpx

Compact I/O for Light Industrial Applications

Subject to change CP-CL.PSI.US 3.08

Control Architecture

Technical Data

Designation CP-E08-M12-CL CP-E08-M8-CLProtection class IP65/IP67No. of channels 8 digital inputs to IEC1131, type 2Sensor supply 24 V DC

Residual current per module: max. 0.8 AShort circuit proof, overload proof (electronic fuse)

Sensor connection 4 x M12 socket, 5-pin, double allocation 8 x M8 socket, 3 pinDisplay components 8 x LEDs for sensor switching status display

1 x short-circuit/overload display1 x status display

Interface Incoming and ongoing CP interface

Designation CP-E16-KL-CL CP-A04-M12-CLProtection class IP20 IP65/67No. of channels 16 digital inputs to IEC1131, type 2 4 digital outputs to IEC1131, type 2Sensor/actuator supply Sensor supply Actuator supply

24 V DC 24 V DCResidual current per module: Max. 0.8 A Max. 0.5 A per channelShort circuit proof, overload proof Short circuit proof, overload proof(electronic fuse) (electronic fuse)

Sensor connection Via spring-tension terminal block, e.g. 4 x M12 socket, 5-pin, socket 1via SAC 30 and 3 double allocation

Display components 1 x short-circuit/overload display 4 x LEDs for actuator1 x status display Switching status display

1 x short-circuit/overload display1 x status display

Interface Incoming and ongoing CP interface

CP-E08-M12-CL

CP-E08-M8-CL

CP-E16-KL-CL

Compact CP-CL I/O Modules

Festo Corporation

For ordering assistance, or to findyour nearest Festo Distributor,Call: 1.800.99.FESTOFax: 1.800.96.FESTOEmail: customer.service@us.festo.comVisit: www.festo.com/us

For technical support,Call: 1.866.GO.FESTOFax: 1.800.96.FESTOEmail: product.support@us.festo.com