Power Operators

Requirements -All Operators To Be Electrically Powered -Operators To Be Aluminum (BHMA 689) Finish Approved Manufacturers -Besam No Substitution

7

Door Control/Door Protection

Requirements Kickplates -All Kickplates To Be Stainless Steel 16g (.050) -All Kickplates To Be 8” High X 2” Less Than Door Width -All Doors With Door Closers To Have Kickplates Installed On Push Side Of Door Stops -Use Wall Stops Wherever Possible -Use Overhead Stops Where Wall Stops Cannot Be Used Approved Manufacturers Trimco Ives Manufacturing Glynn-Johnson Rockwood Manufacturing

8