Upload
phamduong
View
245
Download
4
Embed Size (px)
Citation preview
Crusher Wear Parts2
Metso, the world leader in crushing technology,
also supplies the right wear parts for all types
of crushers, whether in aggregates, mining,
recycling or any other applications. Drawing
on our extensive experience and expertise, we
will make sure customers always have the right
wear parts for the highest quality of production
– and for increased profitability.
Customer knowledgeMetso is in the business of contributing to
customer success. This means working closely
with all customers with a view to understand-
ing their specific needs and business environ-
ments, and ultimately to providing the tools
that are needed for reliable production.
Process knowledgeNo chain is stronger than its weakest link.
Metso is a knowledge-based company with
an in-depth understanding of every link in the
customer’s production process. This is a crucial
precondition for achieving optimal results.
Product knowledgeMetso wear parts are developed on the
strength of both our customer knowledge and
our process knowledge. We have a full range
of high quality wear parts for every type of
crusher and every application.
Linking innovation through MetsoThe creation of Metso through the merger
of Nordberg and Svedala brought together
more than 200 years of experience in crushing
technology. All in all we have delivered some
30,000 crushers, and we have a presence in
more than 100 countries around the world.
The merger also put us in a solid financial
position to continue at the forefront of re-
search and development.
The right wear part for increased profitabilityP R O C E S S K
N O
WL
ED G
E
C U S T O M E R K N O W L E D G E
PRO
DU
C T K N O WL E D G E
Crusher Wear Parts 3
The right wear part for increased profitability
Lowest possible production costsThe price of wear parts themselves is not
what matters – what matters is the production
cost/ton of crushed product. We have the
knowledge to combine long service life and
maximized production of value gradation.
Best end product quality, quantity and gradationThe choice of working wear parts has a key
impact on many production factors – not least
the quality of the end product. The type of raw
material is one of the main considerations in
the choice of wear parts. Metso has the exper-
tise and knowledge to make these choices.
Whatever the application, we have the tools to
make production more cost-effective.
Wear parts that protectMetso certified wear parts will protect your
crushing equipment, prolong its service life
and at the same time preserve its trade-in
value. Metso has extensive experience and
competence in all kinds of wear material,
including Trellex wear resistant products.
P R O C E S S K N
OW
L ED
G E
C U S T O M E R K N O W L E D G E
PRO
DU
C T K N O WL E D G E
Crusher Wear Parts4
Whatever the crusher type, we have the right wear parts
Materials handling in mining and quarrying
applications puts production equipment
under extreme stress. Drawing on its extensive
experience from all over the world, Metso is in
the position to provide sound advice on the
choice of the right wear parts and in this way
to provide the best possible protection for
production equipment – regardless of the
type of crushers.
Metso wear parts increase profitability• Higher and more constant quality
of end product
• More effective production
• Minimized downtime
• Lowered costs
• Prolonged equipment service life
• Improved working environment
Working wear partsWorking wear parts, i.e. jaw plates, blow bars,
mantles and bowl liners, are key components
of crushers. All have a direct bearing on such
production factors as quality, costs, capacity,
downtime, energy consumption, etc. In short,
the performance of working wear parts will
affect overall operating costs and is crucial to
the quality of the end product.
Protecting wear partsMetso provides a full range of protecting wear
parts, such as crusher cheek plates, shields,
feeder bottom wear shields, chute liners and
protection plates. Protecting wear parts pro-
long equipment service life and give improved
overall economy. Our range of rubber wear
products contributes to improved safety in
the workplace, substantially reducing on-site
noise and vibration.
We supply certified wear parts for all crushers designed, manufactured and installed – by Metso e.g. :Svedala, Allis Mineral Systems, Altairac, Barmac, Dragon, Faco, Goodwin Barsby, Loro & Parisini, Superior, Svedala Arbrå, Tidco, Nordberg, Omnicone, Lokomo, Bergeaud, Gyradisc, Big Bite, Nordpactor, Nordwheeler, G-Cone, Waterflush, Citycrusher, Lokotrack, Kue-Ken, Laser, Symons, MP, HP & GP Cone crushers, Nordberg Barmac & Nordberg Impact crushers, C-Jaws. Wear parts for other crushers are also available from Metso.
Crusher Wear Parts 5
Whatever the crusher type, we have the right wear parts
Gyratory crushersMetso offers a wider range of equipment and wear parts for high capacity
gyratory crushers than any other manufacturer on the market. Our wear parts for the
crushing chamber give the highest possible throughput with less stress on different
components, reduced power requirements, and evenly distributed wear patterns on both
the mantle and concaves.
Jaw crushersMetso jaw crushers are based upon a revolutionary modular, non-weld-
ed frame construction. The design offers superior fatigue strength and
reliability and gives numerous mounting options.
Combined with high-quality wear parts that are easy to replace, this
translates into exceptionally high capacity utilization, and cost-efficient
crushing.
Cone crushersMetso is committed to developing the best
possible wear parts for cone crushers as well:
this is crucial for maximum efficiency and
reliability in production. Today more than 2,000
Metso gyratory cone crushers are at work all over
the world, a testimony to their reliability and all-
round versatility.
Impact crushersMetso has over 50 years’ experience in impact crushers,
both vertical and horizontal shaft type crushers.
Our impact crushers feature a unique combination of
heavy rotor design, wear material and crushing chamber
design. The unique design of our impact crushers reduces
maintenance needs and facilitates adjustment in primary,
secondary, tertiary as well as in recycling applications.
Other wear partsMetso offers almost any type of wear protecting products. Other wear parts available from
Metso include Trellex products that are made of rubber, polyurethane and ceramics – alone or
in combination. This is where our engineering shows to advantages – through our competence
to combine different materials.
Crusher Wear Parts6
Knowledge that offers unique advantages
Metso is the world’s leading knowledge based
company in the crushing business. The depth
and breadth of our knowledge and expertise
gives every customer that extra bit of competi-
tive edge.
Main factors in abrasive wearingWearing occurs through various different
mechanisms, including adhesive, fatigue and
abrasive wearing. In the case of crusher wear
parts, whether working or protecting, the main
mechanism involved is abrasion by foreign
particles, which is further divided into three
types: gouging, grinding and scratching
abrasion. Depending on the crushing applica-
tion and the properties of the crushed material,
the wearing is a combination of these three
abrasion components.
Wear resistant materialThe most important feature of wear resistant
materials is their ability to prevent abrasive
particles from penetrating the wear part surface.
The choice of wear resistant material and its
key properties will depend upon the application
and the properties of the crushed material.
Austenitic manganese steelAustenitic manganese steel has unique proper-
ties for wear resistant applications. The most
notable of these properties are its toughness
and fatigue strength. When the surface of
austenitic manganese steel comes under an
impact load, a work hardening process occurs.
The initial hardness of the material is about 220
HV, whereas the hardened layer on the surface
can be up to 600 HV. The hard layer thickness
can be 5-10 mm, depending on the impact load.
Austenitic manganese steel is ideally suited for
applications with high reduction ratios and
hard feed materials.
Main wearing processes in crushersThe main type of wearing that occurs in crushers will depend upon the reduction ratio and the crushability of the feed material. The design of effective wear parts relies crucially on thisknowledge about the crushing process.
Work hardening vs. final hardnessLong service life in manganese steel liners isan indication of a successful work hardeningprocess and a good hardness profile.
HB Hardness
Distance fromsurface mm
Fine
Secondary
Primary
Maximum hardness depends on application, gradation, feedstrength etc.
Primary Secondary TertiaryApplication type
Gouging
Grinding
Scratching
Share %
Manganese microstructure
Crusher Wear Parts 7
Knowledge that offers unique advantages
Gyratory crusher Jaw crusher
Chrome iron and martensitic steelsThe wear resistance of chrome is based upon
hard iron and chromium carbides in the
martensitic matrix. The matrix can have a
hardness of 500-700 HV, depending on the
heat treatment process, whereas the hardness
of the carbide formation is up to 2500 HV.
Chrome iron has certain limitations as wear
material due to its low toughness. It is best
suited for applications where the feed material
is abrasive, but where the reduction ratio and
feed strength are not very high.
Boron steelBoron steels are hot rolled plate materials. Its
wear resistance is based on the high initial
hardness of the martensitic matrix. Its final
hardness, strength and toughness depend
upon the heat treatment procedure used. But
hardness can be 300-500 HV and yield
strength 400-1000 MPa. This material is mostly
used in fabricated protective wear parts:
linings, cheek plates, etc.
Wear in operationWith wear patterns varying in different applications, it isessential to have the right material in the right place toachieve the best possible cost-efficiency in production andget the longest possible service life out of the productionequipment. Metso has the know-how to make sure that this is indeed what happens.
Our knowledge and expertise in crus-hing technology covers the whole chain from design to manufacturing and ins-tallation. It is this broad know-how that guarantees superior reliability in everyapplication.
Rubber
Protected by
High CromeCr white iron
M E T A L S
Manganese Steel
Ni-Cr white iron Polyurethane
Ceramics
P O L Y M E R S
IMPACTIONHIGH VELOCITY > 7 m/s
IMPACTIONLOW VELOCITY < 7 m/sCOMPRESSION SLIDING
Wear in operation caused by
Secondary cone crusherCone crusher Impact crusher VSI crusher
Boron steel
Chrome iron
Crusher Wear Parts8
Own manufacturing guarantees quality
Metso Certified– total quality controlTo make sure our customers get the right wear
parts for the right applications, experts at Metso
laboratories have ongoing research programmes to
analyze the properties of different materials. The re-
sults of their work provide a solid foundation for the
work that is done at our own foundries and manufac-
turing units to produce high-quality wear parts. This
means we have complete control over quality and
logistics at every stage of the process, from the selec-
tion of raw materials through to the final product.
All Metso foundries are ISO 9001certified. In the area
of environmental management we follow the ISO
14001 standard.
No compromises in performanceThe world’s biggest supplier of crusher wear parts,
Metso has a strong R&D infrastructure particularly in
areas of metallurgy and part design. Over the years
our efforts in R&D have considerably increased the
service life of wear parts. Our product range includes
all wear part materials for all crushing applications,
from compressive crushing to impact crushing, from
different manganese steel grades to chrome iron.
Experts in wear resistant steelsClose process control is essential to the production
of high-quality manganese steel, starting from the
selection of raw materials with a low content of
impurities. Every step of the manufacturing process,
including all chemical analyses and melting and heat
treatment, is recorded to make sure that the me-
chanical properties of the wear parts are as constant
as possible.
Accurate fit in every crusherThe final step in the manufacturing process is
machining. This is to ensure an accurate fit in every
crusher and correct chamber shapes. Certified Metso
wear parts always give the best possible product
quality and capacity and maintain the trade-in value
of production equipment.
Design Purchase Control Moulding Melting Casting Machining
Crusher Wear Parts 9
Own manufacturing guarantees quality
Metso Certified Wear Parts supply
Gyratory crushers
Mantles
Concave segments
Jaw crushers
Jaw plates
Cheek plates
Impact crushers
Blow bars
Breaker plates
Liner plates
Tip sets
Distributor plates
Wear plates
Anvils and shoes
Cone crushers
Mantles and bowl liners
Protection cones
Arm guards
Accessories
Fastenings
Backing material
Tightening wedges
Torch rings
Clamping nuts
Crusher Wear Parts10
Metso – the service company with total solutions
Metso is at once a global and a genuinely local
company with a presence now in more than
100 countries. In many strategic locations there
are also workshops to ensure smooth deliver-
ies of customised wear parts, both for our own
crushers and for third party equipment.
Lifelong partnershipsThe key to reliable and efficient production lies
in good maintenance as well as in guaranteed
availability of wears and spares. We at Metso
take seriously our responsibility for every stage
of the production process, throughout the life-
time of our products. This view is also reflected
in our understanding of customer contacts,
which to us are lifelong partnerships.
Modular service packagesOur complete service concept means we can
always offer the optimal service solution. We
can offer either ready-made service packages
or tailored service agreements, which may
include inspections, preventive maintenance
and service agreements and cost per/ton
agreements. We want Metso to stand for reli-
ability.
Crusher Wear Parts 11
The service company Metso• Professional problem solving
• Excellent availability of spare parts
• Comprehensive training
• Long service life, good efficiency and
constant wear part quality
• Outstanding customer service
• Easy to use operational and spare
parts manuals
• Comprehensive service
Metso – the service company with total solutions
We take special pride in our knowledge of localconditions, which is crucial to maintaining highquality standards in the end product.
Immediate availability of wear parts is the key tolower costs and improved reliability.
We have experience from all kinds of applications allover the world. Shown here is a mining application inEurope.
We have local presence in over 100 countries world-wide including:
• More than 140 sales and services units
•Over 30 manufacturing units including 5 foundries
•11 Research and Technology Centers
•10 Distribution Centers
•Extensive network of Services & Repair Centers
Metso Minerals (Sweden) ABCrusher Wear PartsP.O. Box 132SE-231 22 TrelleborgSwedenPhone: +46 410 525 00Fax: +46 410 526 01www.metsominerals.com
For contact or information about your nearest sales office please visit: www.metso.com
Subject to alteration without prior notice. Brochure No. 2711-02-12-SBL/Trelleborg-English © 2012.02 Metso Printed in Sweden