Upload
lamdan
View
222
Download
0
Embed Size (px)
Citation preview
Call your Account Representative for floor stock availability or go on-line at www.independencetube.com.
CSA G40.21 50W (350W)INDEPENDENCE TUBE is now
manufacturing cold-formed HSS
tubing to the Canadian specification
CSA G40 50W, or what is
commonly referred to as 350W.
6226 West 74th StreetChicago, IL 60638
1-800-376-60001-708-563-1950 (FAX)
www.independencetube.com
Comparison of ASTM A500 Grade C to CSA G40.21 50W Round Sections
Mechanical Properties
ASTM A500 Grade C
CSA G40.21 50W O.D. ToleranceASTM A500
Grade CCSA G40.21 50W
Yield Strength 46,000 psi min 50,000 psi min >1.9"-2.5" Incl. +/-.75% +/-.020"
Tensile Strength 62,000 psi min 65,000 psi min Over 2.5"-3.5" Incl. +/-.75% +/-.030"
Elongation in 2" 21 min* 22 min* Over 3.5"-5.5" Incl. +/-.75% +/-.040"
Over 5.5" +/-.75% +/-1%
Comparison of ASTM A500 Grade C to CSA G40.21 50W Square & Rectangular Sections
Mechanical Properties
ASTM A500 Grade C
CSA G40.21 50W O.D. ToleranceASTM A500
Grade CCSA G40.21 50W
Yield Strength 50,000 psi min 50,000 psi min >2.5" Incl. +/-.020" +/-.020"
Tensile Strength 62,000 psi min 65,000 psi min Over 2.5"-3.5" Incl. +/-.025" +/-.030"
Elongation in 2" 21 min* 22 min* Over 3.5"-5.5" Incl. +/-.030" +/-.040"
Over 5.5" +/-1% +/-1%
ASTM A500 Grade C CSA G40.21 50W
Wall Thickness +/-10% +10% / -5%
Mass N/A +10% / -3.5%
Straightness (Max allowed) 1/8" X length (in feet) divided by 5 1/8" X length (in feet) divided by 5
Squareness +/- 2 degrees +/- 2 degrees
January 2017
Call your Account Representative for floor stock availability or go on-line at www.independencetube.com.
CSA G40.21 50 W (350W)
6226 West 74th StreetChicago, IL 60638
1-800-376-60001-708-563-1950 (FAX)
www.independencetube.com
Corner Radii (Wall thickness in inches) MaximumPerimeter
to 24" incl.
Perimeter
over 24"
To .109" incl. 3t .218" —
Over .109" – .134" incl. 3t .268" —
Over .134" – .156" incl. 3t .312" —
Over .156" – .188" 3t .470" —
Over .188" – .250" 3t .625" .750"
Over .250" – .313" 3t .785" .940"
Over .313" – .375" 3t .938" 1.125"
Over .375" – .500" 3t 1.250" 1.500"
Over .500" 3t — 3t
Comparison of ASTM A500 Grade C to CSA G40.21 50W Square & Rectangular Sections
ASTM A500 Grade C CSA G40.21 50WTwist (max 3 feet of length)
1.5 and under .050" .050"
Over 1.5 – 2.5 incl. .062" .062"
Over 2.5 – 4.0 incl. .075" .075"
Over 4.0 – 6.0 incl. .087" .087"
Over 6.0 – 8.0 incl. .100" .100"
Over 8.0 .112" .112"
NOTE: Tolerance includes allowance for convexity and concavity. For rectangular sections, the tolerance calculated for the larger flat dimension shall also apply to the smaller flat dimension. This tolerance shall be increased by 50% when applied to the smaller dimension for rectangular sections whose ratio of cross-sectional dimensions is between 1.5 and 3, and by 100% when this ratio exceeds 3.
January 2017