Upload
phungnguyet
View
223
Download
0
Embed Size (px)
Citation preview
1-2
FRM220-E1/T1
FRM220-ET100
FRM220-DATA
FRM220-DS3/E3
FIBER Modem
E1
V35
Ethernet
E1
V35
Ethernet
FRM220-FXO/FXS
POTS over Fiber
PABXFXO/FXS
/FXS
FRM220-10GE-TX
FRM220-10GE-TS
FRM220-100M
FRM220-1000MS
FRM220-1000M
FRM220A-1002ES
FRM220A-1000EAS/X
FRM220A-FSW103
FRM220-1000EAS/X-1
Ethernet Access
CPE
FRM220-Serial
SCADA
FRM220-MD40 WA/WB
FRM220-MD80 WA/WB
FRM220-MD40, FRM220-MD80
FRM220-MX210
CWDM (MUX/DEMUX)
10G/4G/2.7G
MUX/DEMUX
/DE
/4G/2.
10G/4G
FRM220A-Eoe-1
FRM220A-iMUX 5 (5 E1)
FRM220A-iMUX 8 (8 E1)
FRM220A-iMUX 16 (16 E1)
Router
Ethernet over PDH
FRM220-10G/4G/2.7G
FRM220-1000DS
10G 3R Transponder
Router
10G
FRM220-FOM01
FRM220-FOM04
P2P FOM
E1
Ethernet
Module Cards for Deployment Scenarios FIBER
E1
V35
Ethernet
Phone
Serial
FRM220-CH20 & FRM220A-CH20
www.ctcu.comCTC UNION TECHNOLOGIES CO., LTD.
FRM220-CH20In-Band Managed Multi-Service Platform
The FRM220-CH20 or FRM220A-CH20 is a 2U high 19" Rack, 20-Slot modular media converter chassis with redundant power
and all hot swappable design. It provides an economic solution in high density fiber converter installations in enterprises
or central offices. Particularly, FRM220A chassis supports uplink Gigabyte Ethernet switch, for efficient scalability and easy
deployment in access networks. All critical components, Power, fans, management module and interface cards are hot
swappable, allowing online field replacement. The chassis also has a pair of alarm relays and is able to stack up to 10 chassis
as one management IP address. A number of cards are available that support different protocols including Ethernet, Voice,
Data, transponders, FOM and IMUX.
Multi-Service Platform - Chassis
Specifications
Connectors Console RS232(DB9)
LAN 10/100 Base TX RJ45
Physical Specifications
Dimensions 438 x 303 x 88mm(W x Dx H)
Weight 5.2kg w/o power supply
Power Characteristics AC 100 ~ 240VAC
DC24 18 ~ 36VDC
DC48 36 ~ 75VDC
Temperature Operating 0 ~ 60°C
Storage -10 ~ 70°C
humidity 5% ~ 90% non-condensing
Predicted MTBF 65,000 hrs
Certification FCC class A, VCCI class A, CE, RoHS
Features
2U 19” 20-slot Chassis with AC/DC power redundancy
Chassis backplane consists of passive components
All modules and cards support hot-swapping
Chassis supports uplink Gigabit Ethernet switch 4-port 10/100/1000Base-T
+ 4-port 1000Base-X SFP trunk card (FRM220A-CH20 only)
E1 Inverse Multiplexers are supported by Gigabit Switch
Two alarm relays
Chassis cascade up to 10 with one IP management (FRM220-CH20 only)
The FRM220 series is positioned as a multi-service platform. All of the interface cards can be categorized in eight deployment
scenarios to easily understand and select.
FRM220 Cards for Deployment Scenarios
FRM220A-CH20Ethernet Aggregation Platform
FRM220-CH20 , FRM220A-CH20
1-3
1FRM220-CH20
Single or optional
redundant power supplies
Thermal Fan
(Hot swappable)
Thermal Fan
(Hot swappable)
rmal Fan Therma
FRM220A-GSW/SNMP
Two Alarm Relays
Gigabit Ethernet Aggregation Switch Card
FRM220A-CH20FRM220A-CH20
Single or optional
redundant power supplies
FRM220-NMC
Thermal Fan
(Hot swappable)
Thermal Fan
(Hot swappable)
Therma
Chassis cascade up to
10 with one IP management
UTP cable
rmal Fan
FRM220-CH20 Chassis Cascade
Two Alarm Relays
Master
Slave1
Slave9
w w w.c tcu.comCTC UNION TECHNOLOGIES CO., LTD.
Main Features
Chassis Overview
Multi-Service Platform - Chassis
Both chassis power supplies are hot swappable and modular. Installing two into a chassis provides redundancy should a single power supply fail. A fully
loaded chassis can run continuously with only one power module fitted into the chassis.
Power Redundancy
To further increase system reliability, the FRM220-CH20 or FRM220A-CH20 chassis is fitted with two hot swappable fan modules. Both fan modules can be
easily removed from the rear of the chassis, without interruption to the operation of the line cards.
Cooling Fan
The FRM220-CH20 has been designed as a Multi-service platform. This allows network administrators to deploy the chassis in a wide range of networks.
Technologies supported by the chassis included Fast/Gigabit Ethernet, E1/T1, V35/X21/RS-530, Serial RS-485/RS-422, Voice FXO/FXS, Repeater, Fiber
Multiplexer, E1 Inverse Multiplexer, CWDM Mux/DeMUX and 10G 3R Transponder.
Multi-Protocol Support ( FRM220-CH20 only )
The FRM220-CH20 Chassis features cascadable management which allows managing a stack (up to 10 chassis) from a single IP address. Chassis are
interconnected with standard UTP cables that carry control signals. Each chassis has its own ID, starting with the master chassis ID0 and cascading up to ID9
Chassis Cascade ( FRM220-CH20 only )
The FRM220-CH20 chassis provides an NMC (Network Management Controller) card which must be installed into the first slot of chassis. The NMC card
allows a network administrator the ability to configure and monitor the status of the blades. Management can be achieved locally over RS232, or over
the network by Telnet, Web or SNMP. If the blades support Ethernet in the First Mile (IEEE 802.3ah), then the management module can also configure and
monitor the status of a remote blade.
Network Management ( FRM220-CH20 only )
The FRM220A-CH20 incorporates a 24+4 Gigabit Ethernet Switch. Twenty ports supply each slot of the 2U 20-slot chassis with an electrical gigabit Ethernet
uplink with the remaining four electrical gigabit ports accessible via the rear of the chassis. The additional four ports are provided by SFP sockets.
All eight gigabit ports (4+4) are usable without restrictions for uplink aggregate to the Ethernet Metropolitan Area Network (E-MAN).
The FRM220A-GSW/SNMP card transmits Ethernet between the subscriber equipment (bridge/modem or network interface card) and the E-MAN.
The card provides a user-networking interface with Ethernet packets. This card is capable of providing high bandwidth for assembling Ethernet traffic.
The FRM220A-GSW/SNMP card is not only the system aggregate/trunk module, but also the system's control module, providing OAM/IP Management function.
Gigabit Ethernet Switch with Network Management ( FRM220A-CH20 only )
FRM220-CH20 , FRM220A-CH20
Ch
assis
1-4 www.ctcu.comCTC UNION TECHNOLOGIES CO., LTD.
FRM220 & FRM220A Application Diagram
Multi-Service Platform - Chassis
FIBER
Ethernet
Internet
FRM220-1000M
FRM220-10GE-TS
FRM220-ET100
FRM220-10/100A
220-10
00M
220-10GE-FRM220
220-10
220-10
220-10
220-ET
220-10
FRM220-NMC inserts in
FRM220-CH20 Chassis
FRM220-CH20
Router
Ethernet Switch
FRM220A-1002ES
FRM220A-iMux5
FRM220A-FSW103
FRM220A-1000EAS/X
220A-1
20A-
220A-F
220A-1
A-1000
A-1
20A-iM
FRM220A-CH20
Router
LAN
LAN
LAN
LAN
LAN
LAN
LAN
LAN
EMS
FRM220A-GSW/SNMP
Ethernet Switch card inserts in
FRM220A-CH20 Chassis
Chassis
FRM220 –
Example: FRM220 – CH20
FRM220 –
Example: FRM220 – AC
Model Name Type Description
FRM220-CH20 Chassis 2U 20-Slot rack mount chassis with 20 line card blank plate
FRM220A-CH20 Chassis 2U 20-Slot rack mount chassis with 20 line card blank plate
FRM220-AC Power Chassis power module 100 ~ 240 VAC, IEC connector 200W
FRM220-DC24 Power Chassis power module 18 ~ 36 VDC, 3 pin terminal block 200W
FRM220-DC48 Power Chassis power module 36 ~ 72 VDC, 3 pin terminal block 200W
Ordering Information
Chassis Type Slot Power Type NMC Ethernet Aggregation Card Chassis Cascade
FRM220-CH20 20 AC, DC, AD, AA, DD
FRM220A-CH20 20 AC, DC, AD, AA, DD
FRM220-CH08 8 AC, DC, AD, AA, DD
Note: AC: AC Power DC: DC Power AD: AC+DC Power AA: AC+AC Power DD: DC+DC Power
Comparison Table
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
FRM220-CH20 , FRM220A-CH20