CTD-GPRS

• Minimal influence of bedding • Sample excavation irrespective of soil condition

Multi Sensor Module SENSOdive

• Suitable for wells from 2” on • Up to 6 parameters can be installed • Integrated data transmission technology • Integrated data logger • Parameter monitoring including optional alarm notification

Multi Sensor Module SENSOdive compact

• Applicable from 2″ wells on • Up to 6 parameters can be installed • Integrated data logger • Most compact unit which can be installed under water

Multi Sensor Module MSM-S2

• Wide range of available sensors, up to 8 selectable parameters • Several MSM-S2 modules can be connected to one data logger • Integrated data transmission technology • Parameter monitoring including optional alarm notification

Multi-sensor module MSM compact

• Wide range of available sensors, up to 9 selectable parameters • Integrated data logger technology with internal power supply • Most compact unit suitable for installation under water

Water quality measuring system SENSOlab

• Wide range of available sensors, up to 8 selectable parameters • Integrated data logger technology • Integrated data transmission technology

SENSOwater

• Wide customized range of parameters • Readily installed piping with flow cells • Integrated data logger technology • Integrated data transmission technology

• Combinable with samplers for event and time triggered sampling

Submersible probes

• Analog output for the respective measuring parameter • Partially available with RS-485 interface • Wide range power supply

Water Sampler: VIGILANT

• The Vigilant is the reference on water sampler market. • The easiest to transport, extremely robust, very easy to program • Vigilant is the insurance of a successful sampling campaign.

Water Sampler: AQUIBOX

• The Aquifroid is the perfect refrigerated water sampler for field utilization. • Its simple design and high quality construction offers a polyvalent equipment • can be used for natural, industrial or waste water

Water Sampler: Baby NOx

• The robust and cost-effective stationary water sampler. • Available with many possibilities of bottle configuration, • The best solutions in all the standard utilization of a sampler.

Water Sampler :AQUINOX

• The Aquinox respond to all the standard conditions of sampling • can be designed according to barely all the specific uses • can be encountered on industry or urban waste water. • Self-emptying, isolated bottles, pressurized sampling, monitoring station, all is possible for it.

Groundwater Level /Discharge: Water level recorder WR-GPRS-compact

• Automatic measurement of water level and temperature (option) • Applicable from 2” ground water monitoring wells on

• Flood-proof, IP 68 – option • Internal antenna, optional extern • Easier battery and SIM card change • USB interface

Groundwater Level /Discharge: Water level measuring system OFW-GPRS

• Contact-free water level measurement • Parameter monitoring including optional alarm notification • Integrated data transmission technology • Can be combined with a camera to capture images

Groundwater Level /Discharge: Discharge measuring system SENSO-flow

• Contact-free discharge measurement • Direct calculation of discharge in the device SENSO-flow • Already applicable at low flow rates • Combinable with a camera for visual monitoring of the current situation

Flow-through measurement system – DMT

• Compact unit suitable for field application • Integrated data storage • Customized features up to automatic pump control • Built-in option for monitoring vehicles available

Packer

• Single and double packer sets available • Directly mountable onto the Grundfos MP1 pump • Directly screw able in the Grundfos MP1 linkage • Low pressure operation • Low dead weigh

Mammoth pump – Membrane pump

Membrane pump

• Gentle groundwater sampling • No cross-contamination when stationary used

Mammoth pump

• Without moving parts – operated by compressed air • Directly screw able in the Grundfos MP1 linkage

ML3 - ThetaProbe Soil Moisture Sensor

• Class leading ± 1% soil moisture accuracy Class leading ± 1% soil moisture accuracy • New built-in temperature measurement (only when buried) • New white body - reduces radiative heating • Improved calibration for soil salinity • Ideal for phenotyping based research

SM300 Soil Moisture Sensor

• Cost effective soil moisture sensor • ± 3% accuracy • Good temperature and salinity stability

HH2 Moisture Meter- Readout Unit

• Holds multiple user-defined soil types • Stores up to 2000 time-stamped readings • Includes PC data collection software

PR2 - Profile Probe

• Soil moisture content - not just trends • Low salinity and temperature sensitivity • Portable meter option for convenient multi-site measurement • Out of the box solution - supplied with soil calibrations for common soil types • IP68 protected connectors for versatile connectivity

WET-2 Sensor

• Measures Water content, EC and Temperature • Measures directly within the root zone • A vital tool for precision horticulture • Ideal for phenotyping based research

EQ3 Equitensiometer

• Convenient, accurate and reliable alternative to water-filled tensiometers

• Excellent measurement range 0 to -1000 kPa • Maintenance free: no refilling, degassing, or topping up • No recalibration required • New built-in temperature sensor • New extendable cable system • Buriable and frost resistant (IP68) • Ideal for phenotyping research

SWT-4 and SWT-5 - Water Filled Tensiometers

• Excellent accuracy in wet and irrigated soils • Easy refill model available

HH2 - Moisture Meter - Readout Unit

• Holds multiple user-defined soil types • Stores up to 2000 time-stamped readings • Includes PC data collection software

SWT-MR - Manual Readout Unit

• Includes an automatic offset correction for water column height and installation angle. • Suitable for all SWT Tensiometers. • The unit comes with a small carrying case.

DL2e - Data Logger

• Battery powered, weatherproof, rugged and portable • Expandable by the user to meet changing needs • Easy programming with Ls2Win Software

DL6 - Soil Moisture Data Logger

• Ideal for Profile Probes, Theta Probes and SM300 Sensors • Complete solution with IP67 weather-proof case and battery power

GP1 - General Purpose Data Logger

• 2 differential analogue voltages • 2 temperature channels • 2 pulse counters • Smart relay control

GP2 - Advanced Data Logger and Controller

• Powerful and rugged field data logger • 12 differential (or 24 single ended) channels • ideal for demanding research applications • Powerful and diverse control capabilities • GPRS modem communications undefined • Unique Simulator feature • Ideal for phenotyping based research

GP2 - Advanced Data Logger and Controller

• Battery powered, weatherproof, rugged and portable • Expandable by the user to meet changing needs • Easy programming with Ls2Win Software

Data logger LogTrans16

• High number of input channels • Integrated GPRS/GSM radio technology • Low power consumption • Diverse extension modules available

Data logger LogTrans6-compact

• High-grade alarm functionality • Integrated GPRS/GSM radio technology • Low power consumption • Watertight models available

LogTrans6 with field casing

• Complex alarm functionality • Integrated GPRS/GSM radio technology • Low power consumption • Built-in accumulator, also combinable with solar technology • Robust aluminum housing

P400Xi

• Developed with Linux, • Uses the latest 32bit embedded technologies. • More powerful, more ergonomic and more accessible for communication, it’s the best of its generation. • The p400Xi automated system from PERAX includes Internet technology while remaining compatible with the

p200Xm range of automated systems and monitors because it shares the same protocols.

P16Xt

• Designed for remote reading of all kind of data such as meters, levels, pressures, and the detection of leakage and overflow

• The P16Xt ensures the daily transmission of data, even with very low signal strength, even if there's no power supply on site.

SMARTLOG

• GPRS/SMS data recorder and transmitter • specially adapted for stormfall overflow, flowmeters control, tanks supervision and

all equipment that need a permanent survey.

AP4 – Porometer

• Direct readout of stomatal conductance or stomatal resistance of leafs • Simple absolute calibration in the field • Minimizes leaf stress during measurement • Ideal for phenotyping based research • Award-winning user interface

HEMIv9 HemiView - Forest Canopy Image Analysis System

• Analyses Hemispherical Images • Calculates canopy structure parameters and solar radiation indices • Predicts radiation levels beneath canopy

BF5 - Sunshine Sensor

• Measures global and diffuse radiation, and sunshine duration • PAR reference sensor for SunScan System • No moving parts, shade rings or motorized tracking • Outputs can be PAR (mmol.m-2.s-1), Energy (W.m-2) or Lux •

SS1 - SunScan Canopy Analysis System

• Measures incident and transmitted PAR in canopies • Direct display of Leaf Area Index (LAI) • Usable in cloudy and clear conditions • Weatherproof and battery powered • Proven, research-grade canopy analyzer • Ideal for phenotyping based research

WD3 - WinDIAS Leaf Image Analysis System

• Advanced leaf area meter + perimeter, length, width, object count and more • Measures healthy, diseased and pest-damaged area • Optional conveyor for high throughput • Choice of camera or scanner systems • Ideal for phenotyping based research

ML3 - ThetaProbe Soil Moisture Sensor

• Measures solar radiation and sunshine duration • Global (Total) and Diffuse irradiance in W.m-2 • DNI (Direct-Normal Irradiance) calculation • WMO sunshine threshold: 120 W.m-2 direct beam • No moving parts, shade rings or motorized tracking • No routine adjustment or polar alignment • Works at any latitude • Precision ground glass do

HH2 Moisture Meter- Readout Unit

• A powerful, rugged and highly flexible weather station • Unattended weather recording at remote and exposed sites • Designed for use in severe weather conditions • Wide choice of sensors, including soil moisture • GPRS modem communications

PR2 - Profile Probe

• Compact all-in-one automatic weather station • Highly portable • Unattended weather recording at remote and exposed sites

WET-2 Sensor

• Measures Water content, EC and Temperature • Measures directly within the root zone • A vital tool for precision horticulture • Ideal for phenotyping based research

Precipitation measurement system

• Detection of heavy precipitation events • Transmission of various alarm messages as function of rainfall intensity • Independent power supply

Meteorological stations

• Data logger line LogTrans with customized configuration • Reliable GPRS/GSM data transmission technology • Self-powered stations available

Greenhouse gas monitoring system

• Automatic recording of greenhouse gases • Provision of gas samples with high resolution for specified time periods • Minimal interaction of the surface to be sampled • Possible determination of emission rates based on the analyzed gas samples

ML3-Kit – ThetaKit

• Rapid, accurate measurement of water content in soil • Used by many of the world’s leading golf courses and sporting venues • Soil moisture with ± 1% accuracy • View, store and retrieve readings with the HH2 Moisture Meter • International reputation for ruggedness and reliability

SM300 - Soil Moisture Sensor

• Research grade performance • Good temperature and salinity stability • ± 2.5% accuracy

SM150 - Soil Moisture Sensor

• Cost effective soil moisture measurements • Ideal for substrate monitoring • Compatible with a variety of growing media • ± 3% accuracy

WET-2 - WET Sensor

• Measures Water content, EC and Temperature • Measures directly within the root zone • A vital tool for precision horticulture.

GP2 - Advanced Data Logger and Controller

• Ideal for demanding Irrigation and fertilization applications • Monitor soil moisture and other key growing conditions • Directly control irrigation using-on board relays • Multi-zone control (6 max)

GPI - General Purpose Data Logger - Irrigation

• Ideal for demanding Irrigation and fertilization applications • Monitor soil moisture and other key growing conditions • Directly control irrigation using-on board relays • Multi-zone control (6 max )

Temperature measuring chain

• Digital data transmission via RS-485 bus system • Use of high-precision temperature sensors • Customized number and assembly of temperature sensors • Double seal

Temperature lance

• Defined configuration of temperature measuring points • Use of high-precision temperature sensors • Digital transmission of measurement data • Several temperature lances lockable to one data logger

Mobile temperature lance

• Mobile application • Multi-meter mode to measure various current temperatures with one lance • Highly accurate temperature measurement

T-sensors with 8 channel temperature module

• Digital temperature measuring technique – from sensor through RS-485 signal output

• Network-compatible • Combinable with data logger line Log-Trans

• Highly accurate temperature sensors available

Temperature lance with conductivity spider

• Additional recording of conductivity to describe the interaction of groundwater and surface water

• The data logger LogTrans6-UW10 is suitable for underwater application • Independent power supply • Customized configuration according to the measuring task

Camera-GPRS

Advantages

• System with low power consumption and integrated accumulator, suitable for outdoor use • Additional sensors connectable • Time and/or event triggered recording of images • Event control via external signal or internal alarm

Parameters / Features

• Camera systems with various image resolutions • Data logger LogTrans6 • Optional solar power supply