For more information contact AYRA ROACH P: 682.351.0437 E: aroach@canatexcompletions.com © Canatex Completions Solutions Inc. All Rights Reserved

The WST™ is our next generation advancement of our fi eld proven and widely accepted ballistic release tool, the BRT. It has been specifi cally designed to reduce potential leak paths, eliminate wiring, shorten the assembly, and make use of the DynaStage™ plug-and-go detonator.

WST™

Wireline Separation ToolThe Canatex WST is a reliable ballistic release toolspecifi cally designed to incorporate the TopFire™ detonator technology from DynaEnergetics™.

Specifi cations

O.D. SIZES AVAILABLE

2.75", 2.875", 3.125"

MAXIMUM PULLING

CAPABILITIES

42,000 LBS

MAXIMUM EXTERNAL PRESSURE

RATING

20,000 PSI

TOP CONNECTION

EXTERNAL

1-5/8-6 TPI. ACME (PIN UP)

BOTTOM CONNECTION

INTERNAL

1-5/8-6 TPI. ACME (BOX END)

FISHING NECK

EXTERNAL 1-3/4”

SEALS

VITON 90 DUROMETER

METAL COMPOSITION

4340 NICKEL-CHROMIUM-

MOLYBDENUM ALLOY STEEL

Applications

Plug and perf operations

Horizontal wells

Wells with high

dogleg severity

In wells with casing

deformation that

increases the risk

of becoming stuck

Features

Maximizes strength of weak point in line

Fail safe to protect

against accidental release

Can be run multiple times

with minimal maintenance

20,000psi pressure rating

Uses Dynastage™ TopFire™

detonator technology

EXTERNAL1 5/8" - 6 ACME

24.3"

INTERNAL1 5/8" - 6 ACME

DCN: CX18010.X02

The WST™ assembly replaces disconnect technology that rely on tensile loads to shear activate. This permits maximization of the line strength to intervene in extended reach horizontal wells and prevent pumping-off bottom hole assemblies. The WST™ is founded on extremely reliable disconnect technology that will release from a downhole assembly, when required to do so, leaving a standard fi sh-neck profi le.