-
Arbortext IsoDraw 7.2 Curriculum Guide
-
Live Classroom Curriculum Guide Arbortext IsoDraw 7.2 Foundation
with CADprocess
Arbortext IsoDraw 7.2 Foundation
Arbortext IsoDraw 7.2 CADprocess
-
Arbortext IsoDraw 7.2 Foundation with CADprocessOverview
Course Code TRN-2276T
Course Length 4 Days
In this course, you will learn the basic andadvanced drawing
operations of ArbortextIsoDraw. This course emphasizes
hands-onexperience and a solid foundation in theessential drawing
skills and commands neededto produce quality technical
illustrations forpublications. You will learn how to open, save,and
close new and existing documents. Youwill also learn how to project
geometry fromone plane to another, and learn how to use
theperspective and isometric tools. In addition,you will learn how
to automate the creation oftechnical illustrations from existing
3-D CADdata. Finally, you will learn how to draw andview entities,
understand 3-D projections,moves, and rotation and how to use the
Objectswindow.
Course Objectives
Understand Arbortext IsoDraw basics and fundamental drawing
skills Understand advanced drawing techniques, annotation, and
callouts Understand CADprocess and 3-D import options Understand
3-D projection and conversion options
Prerequisites
Basic computer skills in a Microsoft Windows computing
environment
Background or related experience in an Engineering or Technical
Publications Department
Audience
Authors, editors, and illustrators of technical information
Technical and administrative staff
-
Agenda
Day 1
Module 1 Arbortext IsoDraw Basic Illustration Process
Module 2 Introduction to Arbortext IsoDraw
Module 3 Fundamental Drawing Skills
Module 4 Intermediate Drawing Skills
Module 5 Composition and Layout
Day 2
Module 6 Advanced Transformation Tools
Module 7 Compound Paths
Module 8 Advanced Drawing Techniques
Module 9 Annotation and Callouts
Day 3
Module 10 Customizing the User Environment
Module 11 Project I
Module 12 Arbortext IsoDraw with CADprocess Illustration
Process
Module 13 Introduction to Arbortext IsoDraw CADprocess and 3-D
Import Options
Module 14 Selection of Assemblies
Day 4
Module 15 Working within the 3-D Window
Module 16 3-D Projection and Conversion Options
Module 17 Object Information
Module 18 Using the Browser Window
Module 19 Animation
Module 20 Project II
-
Arbortext IsoDraw 7.2 FoundationOverview
Course Code TRN-2277T
Course Length 2 Days
In this course, you will learn the basic andadvanced drawing
operations of ArbortextIsoDraw. This course emphasizes
hands-onexperience and a solid foundation in theessential drawing
skills and commands neededto produce quality technical
illustrations forpublications. You will learn how to open, save,and
close new and existing documents. Youwill also learn how to project
geometry fromone plane to another, and learn how to use
theperspective and isometric tools. In addition,you will learn how
to automate the creation oftechnical illustrations from existing
3-D CADdata. Finally, you will learn how to draw andview entities,
understand 3-D projections,moves, and rotation and how to use the
Objectswindow.
Course Objectives
Understand Arbortext IsoDraw basics and fundamental drawing
skills Understand advanced drawing techniques, annotation, and
callouts Understand CADprocess and 3-D import options Understand
3-D projection and conversion options
Prerequisites
Basic computer skills in a Microsoft Windows computing
environment
Background or related experience in an Engineering or Technical
Publications Department
Audience
Authors, editors, and illustrators of technical information
Technical and administrative staff
-
Agenda
Day 1
Module 1 Arbortext IsoDraw Basic Illustration Process
Module 2 Introduction to Arbortext IsoDraw
Module 3 Fundamental Drawing Skills
Module 4 Intermediate Drawing Skills
Module 5 Composition and Layout
Day 2
Module 6 Advanced Transformation Tools
Module 7 Compound Paths
Module 8 Advanced Drawing Techniques
Module 9 Annotation and Callouts
Module 10 Customizing the User Environment
Module 11 Project I
-
Arbortext IsoDraw 7.2 CADprocessOverview
Course Code TRN-2278T
Course Length 2 Days
In this course, you will learn the basic andadvanced drawing
operations of ArbortextIsoDraw. This course emphasizes
hands-onexperience and a solid foundation in theessential drawing
skills and commands neededto produce quality technical
illustrations forpublications. You will learn how to open, save,and
close new and existing documents. Youwill also learn how to project
geometry fromone plane to another, and learn how to use
theperspective and isometric tools. In addition,you will learn how
to automate the creation oftechnical illustrations from existing
3-D CADdata. Finally, you will learn how to draw andview entities,
understand 3-D projections,moves, and rotation and how to use the
Objectswindow.
Course Objectives
Understand Arbortext IsoDraw basics and fundamental drawing
skills Understand advanced drawing techniques, annotation, and
callouts Understand CADprocess and 3-D import options Understand
3-D projection and conversion options
Prerequisites
Basic computer skills in a Microsoft Windows computing
environment
Background or related experience in an Engineering or Technical
Publications Department
Audience
Authors, editors, and illustrators of technical information
Technical and administrative staff
-
Agenda
Day 1
Module 1 Arbortext IsoDraw with CADprocess Illustration
Process
Module 2 Introduction to Arbortext IsoDraw CADprocess and 3-D
Import Options
Module 3 Selection of Assemblies
Module 4 Working within the 3-D Window
Module 5 3-D Projection and Conversion Options
Day 2
Module 6 Object Information
Module 7 Using the Browser Window
Module 8 Animation
Module 9 Project II
-
Web Based Curriculum Guide Arbortext IsoDraw 7.2 Foundation with
CADprocess
Arbortext IsoDraw 7.2 Foundation
Arbortext IsoDraw 7.2 CADprocess
-
Arbortext IsoDraw 7.2 Foundation with CADprocessOverview
Course Code SEB-CEK4959
Course Length 32 Hours
In this course, you will learn the basic andadvanced drawing
operations of ArbortextIsoDraw. This course emphasizes
hands-onexperience and a solid foundation in theessential drawing
skills and commands neededto produce quality technical
illustrations forpublications. You will learn how to open, save,and
close new and existing documents. Youwill also learn how to project
geometry fromone plane to another, and learn how to use
theperspective and isometric tools. In addition,you will learn how
to automate the creation oftechnical illustrations from existing
3-D CADdata. Finally, you will learn how to draw andview entities,
understand 3-D projections,moves, and rotation and how to use the
Objectswindow.
Course Objectives
Understand Arbortext IsoDraw basics and fundamental drawing
skills Understand advanced drawing techniques, annotation, and
callouts Understand CADprocess and 3-D import options Understand
3-D projection and conversion options
Prerequisites
Basic computer skills in a Microsoft Windows computing
environment
Background or related experience in an Engineering or Technical
Publications Department
Audience
Authors, editors, and illustrators of technical information
Technical and administrative staff
-
Table of ContentsModule 1 Arbortext IsoDraw Basic Illustration
Process
Module 2 Introduction to Arbortext IsoDraw
Module 3 Fundamental Drawing Skills
Module 4 Intermediate Drawing Skills
Module 5 Composition and Layout
Module 6 Advanced Transformation Tools
Module 7 Compound Paths
Module 8 Advanced Drawing Techniques
Module 9 Annotation and Callouts
Module 10 Customizing the User Environment
Module 11 Project I
Module 12 Arbortext IsoDraw with CADprocess Illustration
Process
Module 13 Introduction to Arbortext IsoDraw CADprocess and 3-D
Import Options
Module 14 Selection of Assemblies
Module 15 Working within the 3-D Window
Module 16 3-D Projection and Conversion Options
Module 17 Object Information
Module 18 Using the Browser Window
Module 19 Animation
Module 20 Project II
-
Arbortext IsoDraw 7.2 FoundationOverview
Course Code SEB-CEK4960
Course Length 16 Hours
In this course, you will learn the basic andadvanced drawing
operations of ArbortextIsoDraw. This course emphasizes
hands-onexperience and a solid foundation in theessential drawing
skills and commands neededto produce quality technical
illustrations forpublications. You will learn how to open, save,and
close new and existing documents. Youwill also learn how to project
geometry fromone plane to another, and learn how to use
theperspective and isometric tools. In addition,you will learn how
to automate the creation oftechnical illustrations from existing
3-D CADdata. Finally, you will learn how to draw andview entities,
understand 3-D projections,moves, and rotation and how to use the
Objectswindow.
Course Objectives
Understand Arbortext IsoDraw basics and fundamental drawing
skills Understand advanced drawing techniques, annotation, and
callouts Understand CADprocess and 3-D import options Understand
3-D projection and conversion options
Prerequisites
Basic computer skills in a Microsoft Windows computing
environment
Background or related experience in an Engineering or Technical
Publications Department
Audience
Authors, editors, and illustrators of technical information
Technical and administrative staff
-
Table of ContentsModule 1 Arbortext IsoDraw Basic Illustration
Process
Module 2 Introduction to Arbortext IsoDraw
Module 3 Fundamental Drawing Skills
Module 4 Intermediate Drawing Skills
Module 5 Composition and Layout
Module 6 Advanced Transformation Tools
Module 7 Compound Paths
Module 8 Advanced Drawing Techniques
Module 9 Annotation and Callouts
Module 10 Customizing the User Environment
Module 11 Project I
-
Arbortext IsoDraw 7.2 CADprocessOverview
Course Code SEB-CEK4961
Course Length 16 Hours
In this course, you will learn the basic andadvanced drawing
operations of ArbortextIsoDraw. This course emphasizes
hands-onexperience and a solid foundation in theessential drawing
skills and commands neededto produce quality technical
illustrations forpublications. You will learn how to open, save,and
close new and existing documents. Youwill also learn how to project
geometry fromone plane to another, and learn how to use
theperspective and isometric tools. In addition,you will learn how
to automate the creation oftechnical illustrations from existing
3-D CADdata. Finally, you will learn how to draw andview entities,
understand 3-D projections,moves, and rotation and how to use the
Objectswindow.
Course Objectives
Understand Arbortext IsoDraw basics and fundamental drawing
skills Understand advanced drawing techniques, annotation, and
callouts Understand CADprocess and 3-D import options Understand
3-D projection and conversion options
Prerequisites
Basic computer skills in a Microsoft Windows computing
environment
Background or related experience in an Engineering or Technical
Publications Department
Audience
Authors, editors, and illustrators of technical information
Technical and administrative staff
-
Table of ContentsModule 1 Arbortext IsoDraw with CADprocess
Illustration Process
Module 2 Introduction to Arbortext IsoDraw CADprocess and 3-D
Import Options
Module 3 Selection of Assemblies
Module 4 Working within the 3-D Window
Module 5 3-D Projection and Conversion Options
Module 6 Object Information
Module 7 Using the Browser Window
Module 8 Animation
Module 9 Project II
Binder1.pdfAgenda_TRN-2276-T_LCTModule 1. Arbortext IsoDraw
Basic Illustration Processi. Arbortext IsoDraw Basic Illustration
ProcessModule 2. Introduction to Arbortext IsoDrawi. Understanding
the Arbortext IsoDraw User Interfaceii. Main Menusiii. Palette
Toolbar and Floating Palettesiv. The Status Bar and the Workspacev.
Configuring the Status Barvi. Drawing Basic Shapesvii. Drawing
Linesviii. Drawing Rectanglesix. Drawing Ellipsesx. Drawing Bzier
Pathsxi. Using Delete FunctionsModule 3. Fundamental Drawing
Skillsi. Applying Transformations and Manipulationsii. Using the
Double Arrowiii. Deleting Hidden Linesiv. Applying Thick and Thin
Pensv. Moving Elementsvi. Creating Concentric Ellipsesvii. Manually
Modifying Ellipse Valuesviii. Grouping Elementsix. Scaling
Elementsx. Drawing Polygonsxi. Drawing a Hexagon Headxii.
Converting Ellipses to Inner and Outer ThreadsModule 4.
Intermediate Drawing Skills i. Using the Attributes Windowii.
Toggling Grids iii. Adding Elements to Create Complex Shapesiv.
Centering Elements Using the Align Operationv. Converting
Elementsvi. Ungrouping Elementsvii. Understanding Tangent
Toolsviii. Using the Fillet Toolix. The Tangent to a Point Toolx.
The Tangent to an Ellipse Toolxi. The Chamfer Toolxii. Subtracting
Elementsxiii. Inserting Deletion Pointsxiv. Calculating Bore
Positionsxv. Project from One Plane to Anotherxvi. Perspective
Rotationxvii. Drawing Additional Connecting Linesxviii. Applying
Appropriate Pens to Ellipsesxix. Rotating ElementsModule 5.
Composition and Layouti. Fitting Elementsii. Aligning Elements iii.
Distributing Elements Module 6. Advanced Transformation Toolsi.
Creating the Flange End of the Pipeii. Calculating the Pipe
Bendiii. Performing the Find Ellipse Operationiv. Using Projection
Toolsv. Project from One Plane to Anothervi. Using Wrapping
Toolsvii. Using Penetration Toolsviii. Accessing the Projection
Windowix. Using the Parallel Paths Toolx. Adding Depth to the
Flange Ends of the Pipexi. Configuring the Profile for
Transformationxii. Using the Rotational Surfaces Toolxiii. Creating
Paths Automaticallyxiv. Applying Color Fills to Pathsxv. Arranging
Elements from Front to Backxvi. Creating a Pipe Jointxvii. Creating
a Hexagon Plugxviii. Drawing Center LinesModule 7. Compound Pathsi.
Understanding Compound Pathsii. Configuring a Compound Pathiii.
Extruding a Compound Pathiv. Using Basic Layer Operationsv.
Creating an Advanced Compound Pathvi. Creating an Outer Contourvii.
Creating an Inner Contourviii. Converting Multiple Paths into a
Compound PathModule 8. Advanced Drawing Techniques i. Advanced
Drawing Techniquesii. Best Practices for Creating a Compound
Pathiii. Configuring a Complex Compound Pathiv. Joining Polylinesv.
Applying Advanced Selection Techniquesvi. Extruding a Profile to
Match a Custom Gridvii. Applying 3D Transformationviii. Creating
Complex Shaftsix. Using the Shear Tool to Modify ElementsModule 9.
Annotation and Calloutsi. Applying Callouts Manuallyii. Using the
Callout Tooliii. Renumbering Calloutsiv. Connected Calloutsv.
Modifying Callout Stylevi. Selecting Elements Based on Criteriavii.
Generating Callouts for Groups and Objectsviii. Options for
Generating Calloutsix. Applying Dimensions to an Illustrationx.
Applying Linear Dimensionsxi. Applying Angular Dimensionsxii.
Applying Radii Dimensionsxiii. Applying Diameter DimensionsModule
10. Customizing the User Environmenti. Customizing Toolbarsii.
Creating Custom Toolbarsiii. Adding Functionality to Toolbarsiv.
Docking Toolbarsv. Configuring the Library Windowvi. Understanding
the Structure of the Library Windowvii. Inserting Library Parts
Automaticallyviii. Inserting Favoritesix. Creating Custom Library
Partsx. Library Parts File and Folder Structurexi. Creating a
Templatexii. Defining Preferencesxiii. Defining the Drawing
Sheetxiv. Defining Distances for Thread Turnsxv. Defining Dimension
Preferencesxvi. Defining Miscellaneous Preferencesxvii. Defining a
Drawing Frame in the Template Filexviii. Defining Attributes in the
Template Filexix. Performing a Visual Check for the Template
Filexx. Defining Layers in the Template Filexxi. Saving the File as
a TemplateModule 11. Project Ii. Project Lab: Drawing a Cut-Away
CylinderModule 12. Arbortext IsoDraw with CADprocess Illustration
Procei. Arbortext IsoDraw with CADprocess Illustration
ProcessModule 13. Introduction to Arbortext IsoDraw CADprocess and
3-Di. Determine the Workflow From 3-D to 2-Dii. Identifying Solid
Model Typesiii. Configuring Preferences: 3-D Optionsiv. 3-D
Options: Smooth Rendering Preferencesv. 3-D Options: Tesselation
Accuracy Preferencesvi. Understanding 3-D Options Preferencesvii.
Configuring IGES Import Optionsviii. Configuring More IGES
Optionsix. Configuring IGES Entity OptionsModule 14. Selection of
Assembliesi. Enabling the Select Assemblies Optionii. Reading
Structures within an IGES Fileiii. Using the Selection of
Structures Windowiv. Reading Structures from an XML Filev.
Exploring Methods for Importing Sub-AssembliesModule 15. Working
within the 3-D Windowi. Using the Window Menuii. Using the Palette
Toolbariii. Working with Objectsiv. Using Redraw to Refresh the
Screenv. Using Functions within the 3D Tools Toolbarvi. 3-D Axes
Toolsvii. 3-D Move Toolsviii. Rotating Componentsix. 3-D
Composition Toolsx. Using 3-D Transparency Tools to Create Phantom
Effectsxi. Converting to a 2-D Illustrationxii. Using 3-D Cut Tools
to Create Cut-Away Effectsxiii. Using the Spacebar to Reposition
Imagesxiv. Duplicating a Surfacexv. Converting a Surface to 2-D as
WireframeModule 16. 3-D Projection and Conversion Optionsi. Placing
Filesii. Applying 3-D Projectionsiii. Applying 3D Transformationiv.
Applying 3-D Projections: Keep 3D Data Optionv. Applying 3-D
Projections: Shaded Optionvi. Applying 3-D Projections: As
Wireframe Optionvii. Applying 3-D Projections: Remove Hidden Lines
Optionviii. Remove Hidden Lines Optionsix. Using Advanced Layer
Operationsx. Removing Hidden Lines Using the Thin Line Thresholdxi.
Smooth Surface Accuracyxii. Removing Transparencyxiii. Combining
3-D Projections to Create Special Effectsxiv. Breaking Links to
Placed FilesModule 17. Object Informationi. Creating Object
Informationii. Accessing Object Informationiii. Definition of
Objectsiv. Identifying Componentsv. Applying Hotspotsvi. Using
Object Information to Generate Callouts Automaticallyvii.
Generating Callouts to a Specific Level of Depthviii. Generating
Callouts from Object Namesix. Generating Callouts from an Object
Listx. Generating Connected Callouts from a BOMxi. Using Functions
in the Objects Menuxii. Using the Objects Windowxiii. Using Layers
with Objectsxiv. Saving Layers Using the Write Layers Operationxv.
Importing Layers Using the Read Layers Windowxvi. Using File
Formats that Support Object Informationxvii. Using Companion
FilesModule 18. Using the Browser Windowi. Configuring the Browser
Windowii. Using the Browser Windowiii. Finding Objectsiv. Using the
Browser Window to Paste Filesv. Applying Threads to a Pasted
Filevi. Using the Browser Window to Place Filesvii. Applying
Threads to a Placed Fileviii. Managing and Updating Placed Filesix.
Pasting Files versus Placing Filesx. Restrictions for Working with
2-D and 3-D DataModule 19. Animationi. Creating an Animation
Sequenceii. Accessing Animation Capabilityiii. Edit Animation
Sequence Settings and Optionsiv. Edit Animation Step Settings and
Optionsv. Edit Animation Window Transformation Settingsvi. Edit
Animation Window Flyout Menu Settingsvii. The Timeline Windowviii.
Exploding Hidden Componentsix. Animating a Rotation Sequencex.
Animating a Change in Colorxi. Playing a 3-D Animation
SequenceModule 20. Project IIi. Project Lab: Create a Cut-Away
Illustration Using 3-D Tools
Agenda_TRN-2277-T_LCTModule 1. Arbortext IsoDraw Basic
Illustration Processi. Arbortext IsoDraw Basic Illustration
ProcessModule 2. Introduction to Arbortext IsoDrawi. Understanding
the Arbortext IsoDraw User Interfaceii. Main Menusiii. Palette
Toolbar and Floating Palettesiv. The Status Bar and the Workspacev.
Configuring the Status Barvi. Drawing Basic Shapesvii. Drawing
Linesviii. Drawing Rectanglesix. Drawing Ellipsesx. Drawing Bzier
Pathsxi. Using Delete FunctionsModule 3. Fundamental Drawing
Skillsi. Applying Transformations and Manipulationsii. Using the
Double Arrowiii. Deleting Hidden Linesiv. Applying Thick and Thin
Pensv. Moving Elementsvi. Creating Concentric Ellipsesvii. Manually
Modifying Ellipse Valuesviii. Grouping Elementsix. Scaling
Elementsx. Drawing Polygonsxi. Drawing a Hexagon Headxii.
Converting Ellipses to Inner and Outer ThreadsModule 4.
Intermediate Drawing Skills i. Using the Attributes Windowii.
Toggling Grids iii. Adding Elements to Create Complex Shapesiv.
Centering Elements Using the Align Operationv. Converting
Elementsvi. Ungrouping Elementsvii. Understanding Tangent
Toolsviii. Using the Fillet Toolix. The Tangent to a Point Toolx.
The Tangent to an Ellipse Toolxi. The Chamfer Toolxii. Subtracting
Elementsxiii. Inserting Deletion Pointsxiv. Calculating Bore
Positionsxv. Project from One Plane to Anotherxvi. Perspective
Rotationxvii. Drawing Additional Connecting Linesxviii. Applying
Appropriate Pens to Ellipsesxix. Rotating ElementsModule 5.
Composition and Layouti. Fitting Elementsii. Aligning Elements iii.
Distributing Elements Module 6. Advanced Transformation Toolsi.
Creating the Flange End of the Pipeii. Calculating the Pipe
Bendiii. Performing the Find Ellipse Operationiv. Using Projection
Toolsv. Project from One Plane to Anothervi. Using Wrapping
Toolsvii. Using Penetration Toolsviii. Accessing the Projection
Windowix. Using the Parallel Paths Toolx. Adding Depth to the
Flange Ends of the Pipexi. Configuring the Profile for
Transformationxii. Using the Rotational Surfaces Toolxiii. Creating
Paths Automaticallyxiv. Applying Color Fills to Pathsxv. Arranging
Elements from Front to Backxvi. Creating a Pipe Jointxvii. Creating
a Hexagon Plugxviii. Drawing Center LinesModule 7. Compound Pathsi.
Understanding Compound Pathsii. Configuring a Compound Pathiii.
Extruding a Compound Pathiv. Using Basic Layer Operationsv.
Creating an Advanced Compound Pathvi. Creating an Outer Contourvii.
Creating an Inner Contourviii. Converting Multiple Paths into a
Compound PathModule 8. Advanced Drawing Techniques i. Advanced
Drawing Techniquesii. Best Practices for Creating a Compound
Pathiii. Configuring a Complex Compound Pathiv. Joining Polylinesv.
Applying Advanced Selection Techniquesvi. Extruding a Profile to
Match a Custom Gridvii. Applying 3D Transformationviii. Creating
Complex Shaftsix. Using the Shear Tool to Modify ElementsModule 9.
Annotation and Calloutsi. Applying Callouts Manuallyii. Using the
Callout Tooliii. Renumbering Calloutsiv. Connected Calloutsv.
Modifying Callout Stylevi. Selecting Elements Based on Criteriavii.
Generating Callouts for Groups and Objectsviii. Options for
Generating Calloutsix. Applying Dimensions to an Illustrationx.
Applying Linear Dimensionsxi. Applying Angular Dimensionsxii.
Applying Radii Dimensionsxiii. Applying Diameter DimensionsModule
10. Customizing the User Environmenti. Customizing Toolbarsii.
Creating Custom Toolbarsiii. Adding Functionality to Toolbarsiv.
Docking Toolbarsv. Configuring the Library Windowvi. Understanding
the Structure of the Library Windowvii. Inserting Library Parts
Automaticallyviii. Inserting Favoritesix. Creating Custom Library
Partsx. Library Parts File and Folder Structurexi. Creating a
Templatexii. Defining Preferencesxiii. Defining the Drawing
Sheetxiv. Defining Distances for Thread Turnsxv. Defining Dimension
Preferencesxvi. Defining Miscellaneous Preferencesxvii. Defining a
Drawing Frame in the Template Filexviii. Defining Attributes in the
Template Filexix. Performing a Visual Check for the Template
Filexx. Defining Layers in the Template Filexxi. Saving the File as
a TemplateModule 11. Project Ii. Project Lab: Drawing a Cut-Away
Cylinder
Agenda_TRN-2278-T_LCTModule 1. Arbortext IsoDraw with CADprocess
Illustration Procesi. Arbortext IsoDraw with CADprocess
Illustration ProcessModule 2. Introduction to Arbortext IsoDraw
CADprocess and 3-D i. Determine the Workflow From 3-D to 2-Dii.
Identifying Solid Model Typesiii. Configuring Preferences: 3-D
Optionsiv. 3-D Options: Smooth Rendering Preferencesv. 3-D Options:
Tesselation Accuracy Preferencesvi. Understanding 3-D Options
Preferencesvii. Configuring IGES Import Optionsviii. Configuring
More IGES Optionsix. Configuring IGES Entity OptionsModule 3.
Selection of Assembliesi. Enabling the Select Assemblies Optionii.
Reading Structures within an IGES Fileiii. Using the Selection of
Structures Windowiv. Reading Structures from an XML Filev.
Exploring Methods for Importing Sub-AssembliesModule 4. Working
within the 3-D Windowi. Using the Window Menuii. Using the Palette
Toolbariii. Working with Objectsiv. Using Redraw to Refresh the
Screenv. Using Functions within the 3D Tools Toolbarvi. 3-D Axes
Toolsvii. 3-D Move Toolsviii. Rotating Componentsix. 3-D
Composition Toolsx. Using 3-D Transparency Tools to Create Phantom
Effectsxi. Converting to a 2-D Illustrationxii. Using 3-D Cut Tools
to Create Cut-Away Effectsxiii. Using the Spacebar to Reposition
Imagesxiv. Duplicating a Surfacexv. Converting a Surface to 2-D as
WireframeModule 5. 3-D Projection and Conversion Optionsi. Placing
Filesii. Applying 3-D Projectionsiii. Applying 3D Transformationiv.
Applying 3-D Projections: Keep 3D Data Optionv. Applying 3-D
Projections: Shaded Optionvi. Applying 3-D Projections: As
Wireframe Optionvii. Applying 3-D Projections: Remove Hidden Lines
Optionviii. Remove Hidden Lines Optionsix. Using Advanced Layer
Operationsx. Removing Hidden Lines Using the Thin Line Thresholdxi.
Smooth Surface Accuracyxii. Removing Transparencyxiii. Combining
3-D Projections to Create Special Effectsxiv. Breaking Links to
Placed FilesModule 6. Object Informationi. Creating Object
Informationii. Accessing Object Informationiii. Definition of
Objectsiv. Identifying Componentsv. Applying Hotspotsvi. Using
Object Information to Generate Callouts Automaticallyvii.
Generating Callouts to a Specific Level of Depthviii. Generating
Callouts from Object Namesix. Generating Callouts from an Object
Listx. Generating Connected Callouts from a BOMxi. Using Functions
in the Objects Menuxii. Using the Objects Windowxiii. Using Layers
with Objectsxiv. Saving Layers Using the Write Layers Operationxv.
Importing Layers Using the Read Layers Windowxvi. Using File
Formats that Support Object Informationxvii. Using Companion
FilesModule 7. Using the Browser Windowi. Configuring the Browser
Windowii. Using the Browser Windowiii. Finding Objectsiv. Using the
Browser Window to Paste Filesv. Applying Threads to a Pasted
Filevi. Using the Browser Window to Place Filesvii. Applying
Threads to a Placed Fileviii. Managing and Updating Placed Filesix.
Pasting Files versus Placing Filesx. Restrictions for Working with
2-D and 3-D DataModule 8. Animationi. Creating an Animation
Sequenceii. Accessing Animation Capabilityiii. Edit Animation
Sequence Settings and Optionsiv. Edit Animation Step Settings and
Optionsv. Edit Animation Window Transformation Settingsvi. Edit
Animation Window Flyout Menu Settingsvii. The Timeline Windowviii.
Exploding Hidden Componentsix. Animating a Rotation Sequencex.
Animating a Change in Colorxi. Playing a 3-D Animation
SequenceModule 9. Project IIi. Project Lab: Create a Cut-Away
Illustration Using 3-D Tools
Agenda_SAB-CEK4959_WBT Arbortext IsoDraw Basic Illustration
Processi. Arbortext IsoDraw Basic Illustration Process Introduction
to Arbortext IsoDrawi. Understanding the Arbortext IsoDraw User
Interfaceii. Main Menusiii. Palette Toolbar and Floating
Palettesiv. The Status Bar and the Workspacev. Configuring the
Status Barvi. Drawing Basic Shapesvii. Drawing Linesviii. Drawing
Rectanglesix. Drawing Ellipsesx. Drawing Bzier Pathsxi. Using
Delete Functions Fundamental Drawing Skillsi. Applying
Transformations and Manipulationsii. Using the Double Arrowiii.
Deleting Hidden Linesiv. Applying Thick and Thin Pensv. Moving
Elementsvi. Creating Concentric Ellipsesvii. Manually Modifying
Ellipse Valuesviii. Grouping Elementsix. Scaling Elementsx. Drawing
Polygonsxi. Drawing a Hexagon Headxii. Converting Ellipses to Inner
and Outer Threads Intermediate Drawing Skills i. Using the
Attributes Windowii. Toggling Grids iii. Adding Elements to Create
Complex Shapesiv. Centering Elements Using the Align Operationv.
Converting Elementsvi. Ungrouping Elementsvii. Understanding
Tangent Toolsviii. Using the Fillet Toolix. The Tangent to a Point
Toolx. The Tangent to an Ellipse Toolxi. The Chamfer Toolxii.
Subtracting Elementsxiii. Inserting Deletion Pointsxiv. Calculating
Bore Positionsxv. Project from One Plane to Anotherxvi. Perspective
Rotationxvii. Drawing Additional Connecting Linesxviii. Applying
Appropriate Pens to Ellipsesxix. Rotating Elements Composition and
Layouti. Fitting Elementsii. Aligning Elements iii. Distributing
Elements Advanced Transformation Toolsi. Creating the Flange End of
the Pipeii. Calculating the Pipe Bendiii. Performing the Find
Ellipse Operationiv. Using Projection Toolsv. Project from One
Plane to Anothervi. Using Wrapping Toolsvii. Using Penetration
Toolsviii. Accessing the Projection Windowix. Using the Parallel
Paths Toolx. Adding Depth to the Flange Ends of the Pipexi.
Configuring the Profile for Transformationxii. Using the Rotational
Surfaces Toolxiii. Creating Paths Automaticallyxiv. Applying Color
Fills to Pathsxv. Arranging Elements from Front to Backxvi.
Creating a Pipe Jointxvii. Creating a Hexagon Plugxviii. Drawing
Center Lines Compound Pathsi. Understanding Compound Pathsii.
Configuring a Compound Pathiii. Extruding a Compound Pathiv. Using
Basic Layer Operationsv. Creating an Advanced Compound Pathvi.
Creating an Outer Contourvii. Creating an Inner Contourviii.
Converting Multiple Paths into a Compound Path Advanced Drawing
Techniques i. Advanced Drawing Techniquesii. Best Practices for
Creating a Compound Pathiii. Configuring a Complex Compound Pathiv.
Joining Polylinesv. Applying Advanced Selection Techniquesvi.
Extruding a Profile to Match a Custom Gridvii. Applying 3D
Transformationviii. Creating Complex Shaftsix. Using the Shear Tool
to Modify Elements Annotation and Calloutsi. Applying Callouts
Manuallyii. Using the Callout Tooliii. Renumbering Calloutsiv.
Connected Calloutsv. Modifying Callout Stylevi. Selecting Elements
Based on Criteriavii. Generating Callouts for Groups and
Objectsviii. Options for Generating Calloutsix. Applying Dimensions
to an Illustrationx. Applying Linear Dimensionsxi. Applying Angular
Dimensionsxii. Applying Radii Dimensionsxiii. Applying Diameter
Dimensions Customizing the User Environmenti. Customizing
Toolbarsii. Creating Custom Toolbarsiii. Adding Functionality to
Toolbarsiv. Docking Toolbarsv. Configuring the Library Windowvi.
Understanding the Structure of the Library Windowvii. Inserting
Library Parts Automaticallyviii. Inserting Favoritesix. Creating
Custom Library Partsx. Library Parts File and Folder Structurexi.
Creating a Templatexii. Defining Preferencesxiii. Defining the
Drawing Sheetxiv. Defining Distances for Thread Turnsxv. Defining
Dimension Preferencesxvi. Defining Miscellaneous Preferencesxvii.
Defining a Drawing Frame in the Template Filexviii. Defining
Attributes in the Template Filexix. Performing a Visual Check for
the Template Filexx. Defining Layers in the Template Filexxi.
Saving the File as a Template Project Ii. Project Lab: Drawing a
Cut-Away Cylinder Arbortext IsoDraw with CADprocess Illustration
Processi. Arbortext IsoDraw with CADprocess Illustration Process
Introduction to Arbortext IsoDraw CADprocess and 3-D Import Opti.
Determine the Workflow From 3-D to 2-Dii. Identifying Solid Model
Typesiii. Configuring Preferences: 3-D Optionsiv. 3-D Options:
Smooth Rendering Preferencesv. 3-D Options: Tesselation Accuracy
Preferencesvi. Understanding 3-D Options Preferencesvii.
Configuring IGES Import Optionsviii. Configuring More IGES
Optionsix. Configuring IGES Entity Options Selection of
Assembliesi. Enabling the Select Assemblies Optionii. Reading
Structures within an IGES Fileiii. Using the Selection of
Structures Windowiv. Reading Structures from an XML Filev.
Exploring Methods for Importing Sub-Assemblies Working within the
3-D Windowi. Using the Window Menuii. Using the Palette Toolbariii.
Working with Objectsiv. Using Redraw to Refresh the Screenv. Using
Functions within the 3D Tools Toolbarvi. 3-D Axes Toolsvii. 3-D
Move Toolsviii. Rotating Componentsix. 3-D Composition Toolsx.
Using 3-D Transparency Tools to Create Phantom Effectsxi.
Converting to a 2-D Illustrationxii. Using 3-D Cut Tools to Create
Cut-Away Effectsxiii. Using the Spacebar to Reposition Imagesxiv.
Duplicating a Surfacexv. Converting a Surface to 2-D as Wireframe
3-D Projection and Conversion Optionsi. Placing Filesii. Applying
3-D Projectionsiii. Applying 3D Transformationiv. Applying 3-D
Projections: Keep 3D Data Optionv. Applying 3-D Projections: Shaded
Optionvi. Applying 3-D Projections: As Wireframe Optionvii.
Applying 3-D Projections: Remove Hidden Lines Optionviii. Remove
Hidden Lines Optionsix. Using Advanced Layer Operationsx. Removing
Hidden Lines Using the Thin Line Thresholdxi. Smooth Surface
Accuracyxii. Removing Transparencyxiii. Combining 3-D Projections
to Create Special Effectsxiv. Breaking Links to Placed Files Object
Informationi. Creating Object Informationii. Accessing Object
Informationiii. Definition of Objectsiv. Identifying Componentsv.
Applying Hotspotsvi. Using Object Information to Generate Callouts
Automaticallyvii. Generating Callouts to a Specific Level of
Depthviii. Generating Callouts from Object Namesix. Generating
Callouts from an Object Listx. Generating Connected Callouts from a
BOMxi. Using Functions in the Objects Menuxii. Using the Objects
Windowxiii. Using Layers with Objectsxiv. Saving Layers Using the
Write Layers Operationxv. Importing Layers Using the Read Layers
Windowxvi. Using File Formats that Support Object Informationxvii.
Using Companion Files Using the Browser Windowi. Configuring the
Browser Windowii. Using the Browser Windowiii. Finding Objectsiv.
Using the Browser Window to Paste Filesv. Applying Threads to a
Pasted Filevi. Using the Browser Window to Place Filesvii. Applying
Threads to a Placed Fileviii. Managing and Updating Placed Filesix.
Pasting Files versus Placing Filesx. Restrictions for Working with
2-D and 3-D Data Animationi. Creating an Animation Sequenceii.
Accessing Animation Capabilityiii. Edit Animation Sequence Settings
and Optionsiv. Edit Animation Step Settings and Optionsv. Edit
Animation Window Transformation Settingsvi. Edit Animation Window
Flyout Menu Settingsvii. The Timeline Windowviii. Exploding Hidden
Componentsix. Animating a Rotation Sequencex. Animating a Change in
Colorxi. Playing a 3-D Animation Sequence Project IIi. Project Lab:
Create a Cut-Away Illustration Using 3-D Tools
Agenda_SAB-CEK4960_WBT Arbortext IsoDraw Basic Illustration
Processi. Arbortext IsoDraw Basic Illustration Process Introduction
to Arbortext IsoDrawi. Understanding the Arbortext IsoDraw User
Interfaceii. Main Menusiii. Palette Toolbar and Floating
Palettesiv. The Status Bar and the Workspacev. Configuring the
Status Barvi. Drawing Basic Shapesvii. Drawing Linesviii. Drawing
Rectanglesix. Drawing Ellipsesx. Drawing Bzier Pathsxi. Using
Delete Functions Fundamental Drawing Skillsi. Applying
Transformations and Manipulationsii. Using the Double Arrowiii.
Deleting Hidden Linesiv. Applying Thick and Thin Pensv. Moving
Elementsvi. Creating Concentric Ellipsesvii. Manually Modifying
Ellipse Valuesviii. Grouping Elementsix. Scaling Elementsx. Drawing
Polygonsxi. Drawing a Hexagon Headxii. Converting Ellipses to Inner
and Outer Threads Intermediate Drawing Skills i. Using the
Attributes Windowii. Toggling Grids iii. Adding Elements to Create
Complex Shapesiv. Centering Elements Using the Align Operationv.
Converting Elementsvi. Ungrouping Elementsvii. Understanding
Tangent Toolsviii. Using the Fillet Toolix. The Tangent to a Point
Toolx. The Tangent to an Ellipse Toolxi. The Chamfer Toolxii.
Subtracting Elementsxiii. Inserting Deletion Pointsxiv. Calculating
Bore Positionsxv. Project from One Plane to Anotherxvi. Perspective
Rotationxvii. Drawing Additional Connecting Linesxviii. Applying
Appropriate Pens to Ellipsesxix. Rotating Elements Composition and
Layouti. Fitting Elementsii. Aligning Elements iii. Distributing
Elements Advanced Transformation Toolsi. Creating the Flange End of
the Pipeii. Calculating the Pipe Bendiii. Performing the Find
Ellipse Operationiv. Using Projection Toolsv. Project from One
Plane to Anothervi. Using Wrapping Toolsvii. Using Penetration
Toolsviii. Accessing the Projection Windowix. Using the Parallel
Paths Toolx. Adding Depth to the Flange Ends of the Pipexi.
Configuring the Profile for Transformationxii. Using the Rotational
Surfaces Toolxiii. Creating Paths Automaticallyxiv. Applying Color
Fills to Pathsxv. Arranging Elements from Front to Backxvi.
Creating a Pipe Jointxvii. Creating a Hexagon Plugxviii. Drawing
Center Lines Compound Pathsi. Understanding Compound Pathsii.
Configuring a Compound Pathiii. Extruding a Compound Pathiv. Using
Basic Layer Operationsv. Creating an Advanced Compound Pathvi.
Creating an Outer Contourvii. Creating an Inner Contourviii.
Converting Multiple Paths into a Compound Path Advanced Drawing
Techniques i. Advanced Drawing Techniquesii. Best Practices for
Creating a Compound Pathiii. Configuring a Complex Compound Pathiv.
Joining Polylinesv. Applying Advanced Selection Techniquesvi.
Extruding a Profile to Match a Custom Gridvii. Applying 3D
Transformationviii. Creating Complex Shaftsix. Using the Shear Tool
to Modify Elements Annotation and Calloutsi. Applying Callouts
Manuallyii. Using the Callout Tooliii. Renumbering Calloutsiv.
Connected Calloutsv. Modifying Callout Stylevi. Selecting Elements
Based on Criteriavii. Generating Callouts for Groups and
Objectsviii. Options for Generating Calloutsix. Applying Dimensions
to an Illustrationx. Applying Linear Dimensionsxi. Applying Angular
Dimensionsxii. Applying Radii Dimensionsxiii. Applying Diameter
Dimensions Customizing the User Environmenti. Customizing
Toolbarsii. Creating Custom Toolbarsiii. Adding Functionality to
Toolbarsiv. Docking Toolbarsv. Configuring the Library Windowvi.
Understanding the Structure of the Library Windowvii. Inserting
Library Parts Automaticallyviii. Inserting Favoritesix. Creating
Custom Library Partsx. Library Parts File and Folder Structurexi.
Creating a Templatexii. Defining Preferencesxiii. Defining the
Drawing Sheetxiv. Defining Distances for Thread Turnsxv. Defining
Dimension Preferencesxvi. Defining Miscellaneous Preferencesxvii.
Defining a Drawing Frame in the Template Filexviii. Defining
Attributes in the Template Filexix. Performing a Visual Check for
the Template Filexx. Defining Layers in the Template Filexxi.
Saving the File as a Template Project Ii. Project Lab: Drawing a
Cut-Away Cylinder
Agenda_SAB-CEK4961_WBT Arbortext IsoDraw with CADprocess
Illustration Processi. Arbortext IsoDraw with CADprocess
Illustration Process Introduction to Arbortext IsoDraw CADprocess
and 3-D Import Opti. Determine the Workflow From 3-D to 2-Dii.
Identifying Solid Model Typesiii. Configuring Preferences: 3-D
Optionsiv. 3-D Options: Smooth Rendering Preferencesv. 3-D Options:
Tesselation Accuracy Preferencesvi. Understanding 3-D Options
Preferencesvii. Configuring IGES Import Optionsviii. Configuring
More IGES Optionsix. Configuring IGES Entity Options Selection of
Assembliesi. Enabling the Select Assemblies Optionii. Reading
Structures within an IGES Fileiii. Using the Selection of
Structures Windowiv. Reading Structures from an XML Filev.
Exploring Methods for Importing Sub-Assemblies Working within the
3-D Windowi. Using the Window Menuii. Using the Palette Toolbariii.
Working with Objectsiv. Using Redraw to Refresh the Screenv. Using
Functions within the 3D Tools Toolbarvi. 3-D Axes Toolsvii. 3-D
Move Toolsviii. Rotating Componentsix. 3-D Composition Toolsx.
Using 3-D Transparency Tools to Create Phantom Effectsxi.
Converting to a 2-D Illustrationxii. Using 3-D Cut Tools to Create
Cut-Away Effectsxiii. Using the Spacebar to Reposition Imagesxiv.
Duplicating a Surfacexv. Converting a Surface to 2-D as Wireframe
3-D Projection and Conversion Optionsi. Placing Filesii. Applying
3-D Projectionsiii. Applying 3D Transformationiv. Applying 3-D
Projections: Keep 3D Data Optionv. Applying 3-D Projections: Shaded
Optionvi. Applying 3-D Projections: As Wireframe Optionvii.
Applying 3-D Projections: Remove Hidden Lines Optionviii. Remove
Hidden Lines Optionsix. Using Advanced Layer Operationsx. Removing
Hidden Lines Using the Thin Line Thresholdxi. Smooth Surface
Accuracyxii. Removing Transparencyxiii. Combining 3-D Projections
to Create Special Effectsxiv. Breaking Links to Placed Files Object
Informationi. Creating Object Informationii. Accessing Object
Informationiii. Definition of Objectsiv. Identifying Componentsv.
Applying Hotspotsvi. Using Object Information to Generate Callouts
Automaticallyvii. Generating Callouts to a Specific Level of
Depthviii. Generating Callouts from Object Namesix. Generating
Callouts from an Object Listx. Generating Connected Callouts from a
BOMxi. Using Functions in the Objects Menuxii. Using the Objects
Windowxiii. Using Layers with Objectsxiv. Saving Layers Using the
Write Layers Operationxv. Importing Layers Using the Read Layers
Windowxvi. Using File Formats that Support Object Informationxvii.
Using Companion Files Using the Browser Windowi. Configuring the
Browser Windowii. Using the Browser Windowiii. Finding Objectsiv.
Using the Browser Window to Paste Filesv. Applying Threads to a
Pasted Filevi. Using the Browser Window to Place Filesvii. Applying
Threads to a Placed Fileviii. Managing and Updating Placed Filesix.
Pasting Files versus Placing Filesx. Restrictions for Working with
2-D and 3-D Data Animationi. Creating an Animation Sequenceii.
Accessing Animation Capabilityiii. Edit Animation Sequence Settings
and Optionsiv. Edit Animation Step Settings and Optionsv. Edit
Animation Window Transformation Settingsvi. Edit Animation Window
Flyout Menu Settingsvii. The Timeline Windowviii. Exploding Hidden
Componentsix. Animating a Rotation Sequencex. Animating a Change in
Colorxi. Playing a 3-D Animation Sequence Project IIi. Project Lab:
Create a Cut-Away Illustration Using 3-D Tools
