Embed Size (px)
Citation preview
CURRICULUM VITAE Dr. Manoj Kumar Tiwari Department of Industrial Engineering and Management, Indian Institute of Technology, Kharagpur - 721302 Tel: +91-3222-283746, Email: mkt09@hotmai l .com , mkt009@gmai l .com [email protected] i tkgp.ernet. inURL: www.geocit ies .com/gurukul007
Date of Birth: September 10th, 1962 (Age as on March 31, 2008: 45.5 Years)
Academic Qualifications
1999-2004 PhD -“Application of intelligent search heuristic to resolve the complexities of machine loading problems of FMS”
Department of Production Engineering, University of Jadavpur, West Bengal, India
1988-1990 M. Tech. (Production Engg.) [First Division] Department of Mechanical Engineering, Motilal Nehru Regional Engineering College (now known as MNIT), Allahabad, Uttar Pradesh, India
1982-1986 B. E. in Mechanical Engineering (First Division) Visvesvaraya Regional Engineering College (now known as VNIT),
Nagpur, Maharashtra, India
Professional Experience
2007-(24th October) –Present
Associate Professor Department of Industrial Engineering and Management, Indian Institute of Technology (IIT), Kharagpur, India
11th July, 2006 to 11th September, 2006
Visiting Professor at Department of Industrial and Systems Engineering, University of Wisconsin-Madison, USA
2005-2007 Professor
Department of Forge Technology, National Institute of Foundry and Forge Technology (NIFFT), Ranchi, India NIFFT is fully funded and administered by Ministry of Human Resource Development, Government of India.
1998 –2005 Assistant Professor
Department of Manufacturing Engineering, NIFFT, Ranchi, India
1996 – 1998 Senior Lecturer
Department of Mechanical Engineering, North Eastern Regional Institute of Science and Technology (NERIST), Itanagar, India NERIST is established and funded by Ministry of Human Resource Development, Government of India.
1990- 1996 Lecturer
Department of Mechanical Engineering, NERIST, Itanagar, India
Research Interests • Decision Support Models, Planning, Scheduling and Control Problems of Manufacturing
System, Supply Chain Network
• AI Applications in Manufacturing
• Intelligent Search Technique
• Nature Inspired Algorithm
• Agent Technology and its Applications
• Planning Problem of Assembly/ Disassembly
• Continuous Improvement Techniques
Teaching Interests
Industrial Engineering, Intelligent Manufacturing, Manufacturing Science, Production Technology, Flexible Manufacturing System, Operations Research, Operations Management, Computer Aided Manufacturing etc.
Contribution as a Supervisor
• Supervised 1 PhD student and presently supervising 7 more PhD students.
• Mentor of about 35 students and among them 25 are pursuing their Masters and Doctoral work in various universities of USA, UK, Hong Kong and Canada. All of them have learnt the research methodologies under my supervision and published articles in leading international journals and conferences.
• Supervised 12 Master’s thesis.
• Supervised over 50 Bachelor’s project work.
Achievements and Honors
• Editorial Responsibilities
Associate Editor of Journal of Intelligent Manufacturing, published by Springer
Associate Editor of International Journal of System Science, published by Taylor and Francis
Editorial Board Member of International Journal of Computer Integrated Manufacturing (IJCIM), published by Taylor and Francis (Effective from January’08)
Editorial Board Member of International Journal of Production Research (IJPR), published by Taylor and Francis
Editorial Board Member of Robotics and Computer Integrated Manufacturing (RCIM), published by Elsevier
Editorial Board Member of International Journal of Advanced Manufacturing Technology (IJAMT), Published by Springer
Editorial Board Member of International Journal of Decision Making in Manufacturing and Services
Editorial Board Member of Applied Mathematical Sciences (AMS) published by Hikari Ltd, Bulgaria.
Editorial Board Member of International Journal of Manufacturing Research (IJMR) (Effective from January’08).
Editorial Board Member of Journal of Advances in Management Research (JAMR)
Guest Editor of Special issue of International Journal of Production Research (IJPR), published by Taylor and Francis
Guest Editor of Special Issue of International Journal of Intelligent Systems Technology and Applications (IJISTA), published by Inderscience, UK
2
Guest Editor of Special Issue of International Journal of Computer Applications and Technology (IJCAT), published by Inderscience, UK
• Member of Scientific Committee of Flexible Automation and Intelligent Manufacturing ( FAIM) 2005, 2006 and 2007
• Member of International Advisory Committee of International Manufacturing Leaders Forum (IMLF) 2006, Taipei, Taiwan
• Member of Program Committee of International multi conference of Engineers and Computer Scientists (IMECS) 2007
• Listed in the panel of reviewers of 31 International Journals
IEEE Transactions on Systems, Man and Cybernetics (Part: A)
IEEE Transactions on Systems, Man and Cybernetics (Part: B)
IEEE Transactions on Systems, Man and Cybernetics (Part: C)
IEEE Transactions on Evolutionary Computation
IEEE Transactions Automation Science and Engineering
ASME - Journal of Manufacturing Science and Engineering
Transactions of Institute of Industrial Engineering (Design and Manufacturing)
Transactions of Institute of Industrial Engineering (Quality and Reliability)
European Journal of Operation Research (EJOR)
International Journal of Production Research (IJPR)
Journal of Operation Research Society (JORS)
International Journal of Production Economics (IJPE)
Computers and Industrial Engineering (CIE)
International Journal of Management Science (Omega)
Production Planning and Control (PPC)
Proceedings of Institute of Mechanical Engineering Part: B Journal of Engineering Manufacture
Proceedings of Institute of Mechanical Engineering Part: C Journal of Mechanical Engineering Science
Proceedings of Institute of Mechanical Engineering Part: G Journal of Aerospace Engineering
International Journal of System Science (IJSS)
International Journal of Computer Integrated Manufacturing
Journal of Heuristics
International Journal of Material Processing Technology
International Journal of Manufacturing Technology & Management
Integrated Manufacturing Systems
International Journal of Advanced Manufacturing Technology.
International Journal of Business Performance Management
International Journal of Technology Management
International Journal of Six Sigma and Competitive Advantage
Integrated Computer-Aided Engineering (ICAE)
3
International Journal of Mechanical Sciences
Management Research News
Information Sciences
• Key note speaker in National Conference on "Emerging Trends in Nano-Technology and Innovations in Design and Manufacturing-ETNDM-2006, Rourkela, India (held on 18th February, 2006)
• Key note speaker in National Conference on Quality and Reliability – CQR-2006, Rourkela, India (held on 4th November, 2006)
• Received offers to act as Session chair in several international conferences
• Considered for inclusion in the MARQUIS Who's Who in the world (1998) and 2007.
Edited Books
Swarm Intelligence, Focus on Ant and Particle Swarm Optimization, Edited by Prof F. T. S. Chan and Prof M. K. Tiwari, I-Tech Education and Publishing, Vienna, Austria, 2007.
Visits
∗ Visited
1. Department of Industrial Engineering, University of Wisconsin-Madison, Wisconsin, USA (July-September, 2006)
2. Department of Engineering Management and Systems Engineering, Engineering Management, University of Missouri-Rolla, USA (September, 2006)
3. Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, UK (July, 2006)
4. Department of Mechanical Engineering, University of Bath, UK (July, 2006)
5. School of Business and Economics, University of Exeter, Exeter, UK (July, 2006)
Summary of Research Publications
Refereed International Journal Publications 126
International Conferences Proceedings 31
National Conferences Proceedings 28
Articles in professional magazine 1
Completed manuscript, accepted for presentation and publication in the
International Conferences but could not be presented 17
Research Reports 10
Articles Communicated to International Journals 30
Research Papers Published in the International Journals
1. M. Yogeswaran; S. G. Ponnambalam, and M. K. Tiwari, An efficient hybrid evolutionary heuristic using genetic algorithm and simulated annealing algorithm to solve machine loading problem in FMS, accepted for publication in International Journal of Production Research.
4
2. Shubham Agrawal, B.K. Panigrahi, and M.K. Tiwari, Multiobjective Particle Swarm Algorithm with Fuzzy Clustering for Electrical Power Dispatch, accepted for publication in , IEEE Transaction on Evolutionary Computations.
3. M. Bachlaus, M.K.Tiwari and F.T.S. Chan, Multi-objective resource assignment problem in a product-driven supply chain using a Taguchi-based DNA algorithm, accepted for publication in International Journal of Production Research.
4. Salik R. Yadav, Amol Ghorpade, Chetan Mahajan, M.K. Tiwai, and Ravi Shankar, Optimizing a Logistics System with multiple Procurement and Warehousing using Endosymbiotic Evolutionary Algorithm, accepted for publication in International Journal of Logistics Systems and Management.
5. Mukul Tripathi, Shubham Agrawal, Mayank Kumar Pandey, Ravi Shankar, M. K. Tiwari, Real world Disassembly Modelling and Sequencing Problem: Optimization by Algorithm of Self Guided Ants (ASGA), accepted for publication in Robotics and Computer Integrated Manufacturing, (2007).
6. Sanjay Kumar Shukla, M.K. Tiwari, Soft Decision Trees: A Genetically Optimized Cluster Oriented Approach, accepted for publication in Expert System With Applications (ESWA)
7. Manish Bachlaus, Mayank Kumar Pandey, Chetan Mahajan, Ravi Shankar and M. K. Tiwari, Designing an integrated multi-echelon agile supply chain network: A Hybrid Taguchi-Particle swarm optimization approach, accepted for publication in Journal of Intelligent Manufacturing.
8. Manish Bachlaus, F.F. Chen and M.K. Tiwari, Solving Integrated Process Planning and Scheduling Problem: A Hierarchical DNA based approach, accepted for publication in International Journal of Production Research.
9. Yogesh Dashora, Sanjeev Kumar, Nagesh Shukla and M.K. Tiwari, Improved and Generalized Learning Strategies for Dynamically Fast and Statistically Robust Evolutionary Algorithms, accepted for publication in Engineering Applications of Artificial Intelligence.
10. Anoop Prakash and M.K. Tiwari, Role of Corporate Memory (CM) in Global Supply Chain Environment, accepted for publication in International Journal of Production Research.
11. Anoop Prakash, M. K. Tiwari, and R. Shankar, Machine Loading Problem in FMS: An Ant Colony Based Optimization Approach, Accepted for Publication in Journal of Intelligent Manufacturing .
12. A. K. Sahoo, M. K. Tiwari and A. R. Mileham, Six Sigma Based Approach to Optimize Radial Forging Operation Variables, Journal of Material Processing Technology, 2007, (In Press).
13. Sanjay Kumar Shukla, M. K. Tiwari and Young Jun Son, Bidding Based Multi-Agent System for Integrated Process Planning and Scheduling: A Data Mining and Hybrid Tabu-SA Algorithm Oriented Approach, International Journal of Advanced Manufacturing Technology, 2007, (In Press).
14. Nagesh Shukla, M K Tiwari and Ravi Shankar, Optimal Sensor Distribution for Multi-Station Assembly Process Using Chaos Embedded Fast Simulated Annealing, accepted for publication in International Journal of Production Research, (2007).
15. Sanjeev Kumar, Aydin Nassehi, Stephen T. Newman, Richard D. Allen, and M. K. Tiwari, Process control in CNC manufacturing for discrete components: A STEP-NC compliant framework, Robotics and Computer Integrated Manufacturing, 2007, (In Press).
16. Yogesh Dashora, M. K. Tiwari and K. P. Karunakaran, A Psycho Clonal Algorithm Based Approach to Solve Operation Sequencing Problem in CAPP Environment accepted for publication in International Journal of Computer Integrated Manufacturing.
5
17. Nitesh Khilwani, Anoop Prakash, Ravi Shankar and M. K. Tiwari, Fast Clonal Algorithm, Engineering Applications of Artificial Intelligence, 2007, (In Press).
18. M.K. Tiwari, J. Saha and S. K. Mukhopadhyay, Part Selection and Machine Loading problem in FMS Environment: A Heuristic approach based on Reallocation Paradigm, International Journal of Computer Applications in Technology, 2007, (In Press).
19. Manish Shukla, Nagesh Shukla, M.K. Tiwari, and F.T.S. Chan, Integrated model for batch sequencing problem in multi-stage supply chain: An Artificial Immune System based approach, in International Journal of Production Research, 2007, (In Press)
20. Ritesh Kumar Singh, Abhijit Kumar Choudhury, M.K. Tiwari and Ravi Shankar, Improved Decision Neural Network (IDNN) based consensus method to solve a multi-objective group decision making problem, in Advanced Engineering Informatics, 2007,(In Press).
21. V. Ravi, Ravi Shankar, and M. K. Tiwari, Selection of a reverse logistics project for end-of-life computers: ANP and goal programming approach, , International Journal of Production Research, 2007, (In Press ).
22. S. R. Yadav, Y. Dashora, Ravi Shankar, Felix T.S Chan, and M.K. Tiwari , An interactive particle swarm optimization technique for selecting a product family and designing its supply, International Journal of Intelligent Systems Technologies and Applications, 2007 (In Press).
23. F. T. S. Chan, N. Kumar, M.K. Tiwari, H. C. W. Lau, and K. L. Choy, Global supplier selection: a fuzzy-AHP approach, International Journal of Production Research, 2007 (Published Online).
24. Anoop Prakash, Nitesh Khilwani, M. K. Tiwari and Yuval Cohen, Modified Immune Algorithm for Job Selection and Operation Allocation Problem in Flexible Manufacturing Systems, Advances in Engineering Software, 2007 (Published Online).
25. Ravi Shankar, V. Ravi, and M.K. Tiwari, Analysis of interaction among variables of reverse logistics: a System Dynamics approach, International journal of Logistics Systems and Management, 2007 (Published Online).
26. Ajit Kumar Sahoo, N K Singh, Ravi Shankar, and M.K.Tiwari, Lean philosophy: Implementation in a forging company, International Journal of Advanced Manufacturing Technology, 2007 (Published Online).
27. S. C. Srivastava, A. K. Choudhary, Surendra Kumar, and M. K. Tiwari, Development of intelligent agent based AGV controller for flexible manufacturing system, International Journal of Advanced Manufacturing Technology, 2007 (Published Online).
28. Sanjay Kumar Shukla, Young Jun Son and M. K. Tiwari, Fuzzy based adaptive sample-sort simulated annealing for resource-constrained project scheduling, International Journal of Advanced Manufacturing Technology, 2007 (Published online).
29. Nishikant Mishra, A. K. Choudhary and M. K. Tiwari, Modeling the Planning and Scheduling across the Outsourcing Supply Chain: A Chaos Based Fast Tabu-SA Approach, International Journal of Production Research, 2007 (Published online).
30. Shubham Agrawal and M.K. Tiwari, A Collaborative Ant Colony Algorithm to Stochastic Mixed-Model U-shaped Disassembly Line Balancing and Sequencing Problem, International Journal of Production Research, 2007 (Published online).
31. Vikas Kumar, FTS Chan, and M.K. Tiwari, The relevance of Outsourcing and Leagile strategies in performance optimization of an Integrated Process Planning and Scheduling Model, International Journal of Production Research, 2007 (Published online).
32. Manish Bachlaus, M. K. Tiwari and Ravi Shankar, Sequencing of Parts on Single Stage Multifunctional machining Systems using Chaos Embedded Simulated Annealing algorithm, International Journal of Production Research, 2007 (Published Online).
33. Shubham Agrawal, Yogesh Dashora, M. K. Tiwari and Young-Jun Son, Interactive Particle Swarm: A Pareto-Adaptive Metaheuristic to Multiobjective Optimization, IEEE Transactions on Systems, Man and Cybernetics-Part A: Systems and Humans, 2008, 38 (2).
6
34. A. K. Choudhary, M. K. Tiwari, and R. Shankar, Fuzzy Modelling of an Agent Oriented Manufacturing Enterprise, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2007, 221(10), 1533-1541.
35. R. K. Singh, Nitesh Khilwani and M. K. Tiwari, Justification for the Selection of
Reconfigurable Manufacturing System: A Fuzzy Analytical Hierarchy Based Approach, International Journal of Production Research, 2007, 45(14), 3165–3190.
36. B.K. Panigrahi, Salik R. Yadav, Shubham Agrawal, and M.K. Tiwari, A Clonal
Algorithm to Solve Constrained Economic Dispatch, Electrical Power Systems Research, 2007, 77, 1381-1389.
37. Satish Tyagi, Amol Ghorpade, K. P. Karunakaran, and M. K. Tiwari, Exploring optimal part orientation in layered manufacturing by using evolutionary Stickers Based DNA Algorithm, Virtual and Rapid Prototyping, 2007, 2, 3-19.
38. Mayank Kumar Pandey, M.K. Tiwari and Ming J. Zuo, Interactive Enhanced Particle Swarm Optimization: A Multiobjective Reliability Application, IMechE Part O: Journal of Risk and Reliability, 2007, 221, 177-191.
39. Amol Ghorpade, M.K. Tiwari and K.P. Karunakaran, Selection of optimal part orientation in fused deposition modeling using Swarm Intelligence, IMechE Part B: Journal of Engineering Manufacture, 2007, 221.
40. Felix T. S. Chan, Rahul Swarnkar, and M.K. Tiwari, Infrastructure for co-ordination of multi-agents in a network–based manufacturing system, The International Journal of Advanced Manufacturing Technology, 2007, 31, 1028-1033.
41. Nishikant Mishra, Gaurav Singh, Ravi Shankar and M. K. Tiwari, An Integrated Approach for Advanced Process Plan Selection Problem in Distributed Manufacturing Supply Chain, accepted for publication in Engineering Optimization, (2006).
42. Nishikant Mishra, Alok Kumar Choudhary, M.K. Tiwari, and Ravi Shankar, Rollout Strategy Based Probabilistic Causal Model Approach for the Multiple Fault Diagnosis, accepted for publication in Robotics and Computer Integrated Manufacturing, (2006).
43. Nitesh Khilwani, Ravi Shankar and M.K. Tiwari, Facility layout problem: An approach based on group decision making system and Psychoclonal algorithm, International Journal of Production Research, 2006, (Published online).
44. Mohit Goswami, M.K. Tiwari and S.K. Mukhopadhyay, An Integrated Approach to Solve Tool-part Grouping, Job Allocation and Scheduling Problems in a Flexible Manufacturing System, International Journal of Advanced Manufacturing Technology, 2006 (Published online).
45. N. Kumar, M.K. Tiwari, F.T.S. Chan, Development of a hybrid negotiation scheme for multi-agent manufacturing systems, International Journal of Production Research, 2006 (Published Online).
46. Niraj Kumar, Rakesh Ranjan and M. K. Tiwari, Recognition of Undercut Features and Parting Surface of Molded Parts Using Polyhedron Face Adjacency Graph, International Journal of Advanced Manufacturing Technology, 2006 (Published Online).
47. Rina Agarwal, M.K. Tiwari and S.K. Mukherjee, Artificial Immune System based Approach for Solving Resource Constraint Project Scheduling Problem, International Journal of Advanced Manufacturing Technology, 2006 (Published Online).
48. Raj Bardhan Anand, Sanjay Kumar Shukla, Amol Ghorpade, M. K. Tiwari and Ravi Shankar, Six sigma based approach to optimize deep drawing operation variables, International Journal of Production Research, 2007, 45(10), 2365-2385.
49. Shashi Kumar, Sanjeev Kumar, Prakash, Ravi Shankar, M.K. Tiwari and Shashi Bhushan Kumar, Prediction of flow stress for carbon steels using recurrent self-organizing neuro fuzzy networks, Expert Systems with Applications, 2006, 32, 777-788.
50. Ashish Agarwal, Ravi Shankar and M.K. Tiwari, Modeling agility of supply chain, Industrial Marketing Management, 2006, 36, 443-457.
7
51. V. Kumar, Prakash, M. K. Tiwari and F.T.S. Chan, Stochastic make-to-stock inventory deployment problem: an endosymbiotic psychoclonal algorithm based approach, International Journal of Production Research, 2006, 44, 2245-2263.
52. Ajit Kumar Sahoo, N K Singh and M.K. Tiwari, Implementation of Lean Initiatives to Minimize Defects in a Forging Enterprise, International Journal of Productivity and Quality Management, 2006, 2 , 322-346.
53. M. K. Tiwari, J. Saha and S. K. Mukhopadhyay, Heuristic Solution Approaches for Combined-Job Sequencing and Machine Loading Problem in Flexible Manufacturing Systems, International Journal of Advanced Manufacturing Technology, 2006, 31, 716-730.
54. Manish Bachlaus, Nagesh Shukla, M.K. Tiwari and Ravi Shankar, Optimization of System Reliability Using Chaos Embedded Self Organizing Hierarchical Particle Swarm Optimization, Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Engineering Manufacture, 2006, 220, 77-91.
55. R.K. Singh, A.K. Choudhury, M.K. Tiwari and R. Maull, An integrated fuzzy based decision support system for selection of lean tools: A case study from the steel industry, Proceedings of Institute of Mechanical Engineers-Part B Journal of Engineering Manufacture, 2006, 220, 1735-1749.
56. Yogesh Dashora, Sanjeev Kumar, M. K. Tiwari and Ravi Shankar, Ant colony optimization to select best process plan in automated manufacturing environment, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2006, 220, 1457-1472.
57. S. Kumar, S. Kumar, Prakash, M.K. Tiwari and R.Shankar, Solving part type selection and operation allocation problems in a FMS: an approach using constraints based fast simulated annealing algorithm, IEEE Transaction on Systems, Man and Cybernetics, Part A, 2006, 36, 1170- 1184.
58. A.K. Choudhury, Ravi Shankar and M.K. Tiwari, Consensus-based intelligent group decision-making model for the selection of advanced technology, Decision Support Systems, 2006, 42, 1776 – 1799.
59. F.T.S. Chan, S.H. Chung, P.L.Y. Chan, G. Finke and M. K. Tiwari, Solving distributed FMS scheduling problems subject to maintenance: Genetic algorithms approach, Robotics and Computer Integrated Manufacturing, 2006, 22, 493-504.
60. A. K. Choudhary, M. K. Tiwari, and J. A. Harding, Part Selection and Operation-Machine Assignment in a Flexible Manufacturing System Environment: A Genetic Algorithm with Chromosome Differentiation-Based Methodology, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2006, 220, 677-694.
61. Gaurav Singh, A. K. Choudhary, K.P. Karunakaran and M. K. Tiwari, An evolutionary approach for multi-pass turning operations, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2006, 220, 145-162.
62. Jiju Antony, Rahul Swarnkar, Maneesh Kumar, and M.K. Tiwari, Design of Synchronized Supply Chain: A GA based SIX SIGMA constrained approach, International Journal of Systems and Logistics Management, 2006, 2, 120 – 141.
63. Maneesh Kumar, Jiju Antony, R. K. Singh, M.K. Tiwari and D. Perry, Implementing the Lean Sigma Framework in an Indian SME: A Case Study, Production Planning and Control, 2006, 7, 407-423.
64. Vijay Pandey, M. K. Tiwari and S. Kumar, An interactive approach to solve the operation sequencing problem using simulated annealing, The International Journal of Advanced Manufacturing Technology, 2006, 29, 1212-1231.
65. R. K. Singh, Prakash, S. Kumar and M.K. Tiwari, Psycho-clonal based approach to solve a TOC product mix decision problem, The International Journal of Advanced Manufacturing Technology, 2006, 29, 1194-1202.
66. Akhilesh Kumar, Prakash, M.K. Tiwari, Ravi Shankar and Alok Baveja, Solving machine-loading problem of a flexible manufacturing system with constraint - based genetic algorithm, European Journal of Operational Research, 2006, 175, 1043-1069.
8
67. Ashish Agarwal, Ravi Shankar and M.K. Tiwari, Modeling the metrics of lean, agile and leagile supply chain: An ANP-based approach, European Journal of Operational Research, 2006, 173, 211-225)
68. Akhilesh Kumar, Anuj Prakash, Ravi Shankar and M.K. Tiwari, Psycho-Clonal algorithm based approach to solve continuous flow shop scheduling problem, Expert Systems with Applications, 2006, 31, 504-514.
69. Felix T.S. Chan, Rajat Bhagwat, N. Kumar, M.K. Tiwari and Philip Lam, Development of a decision support system for air-cargo pallets loading problem: A case study, Expert Systems with Applications, 2006, 31, 472-485.
70. Jiju Antony, R. B. Anand, Manish Kumar, and M. K. Tiwari, Multiple Response Optimization using Taguchi Methodology and Neuro-Fuzzy based Models, International Journal of Quality and Reliability Management, 2006, 17, 908-925.
71. Alok Kumar Choudhary, Kumar Ashutosh Singh and M.K. Tiwari, A statistical tolerancing approach for design of synchronized supply chains, Robotics and Computer-Integrated Manufacturing, 2006, 22, 315-321.
72. Vikas Kumar, Shashi Kumar, M. K. Tiwari and F. T. S. Chan, Auction-based approach to resolve the scheduling problem in the steel making process, International Journal of Production Research, 2006, 44, 1503–1522.
73. R. K. Singh, S. Kumar, A. K. Choudhary and M. K. Tiwari, Lean tool selection in a die casting unit: a fuzzy-based decision support heuristic, International Journal of Production Research, 2006, 44, 1399 – 1429.
74. R. B. Anand, M. K. Tiwari and R. Shankar, A self-organized neural network metamodelling and clonal selection optimization-based approach for the design of a manufacturing system, International Journal of Production Research, 2006, 44, 1147 – 1170.
75. M. Goswami and M. K. Tiwari, A reallocation-based heuristic to solve a machine loading problem with material handling constraint in a flexible manufacturing system, International Journal of Production Research, 2006, 44, 569 – 588.
76. S. Kumar, A. K. Choudhary, M. Kumar, R. Shankar and M. K. Tiwari, Kernel distance-based robust support vector methods and its application in developing a robust K-chart, International Journal of Production Research, 2006, 44, 77 – 96.
77. S. Mishra, Prakash and M. K. Tiwari, A fuzzy goal-programming model of machine-tool selection and operation allocation problem in FMS: a quick converging simulated annealing-based approach, International Journal of Production Research, 2006, 44, 43 – 76.
78. M. K. Tiwari, A. Mukherjee, and R. Shankar, Application of a kin selection based simulated annealing algorithm to solve a complex scheduling problem, International Journal of Computer Integrated Manufacturing, 2005, 18, 671 – 685.
79. R. P. Mohanty, R. Agarwal, A. K. Choudhury, and M. K. Tiwari, A fuzzy ANP-based approach to R&D project selection: a case study, International Journal of Production Research, 2005, 43, 5199 – 5216.
80. A. M. Choubey, Prakash, F. T. S. Chan and M. K. Tiwari, Solving a fixture configuration design problem using genetic algorithm with learning automata approach, International Journal of Production Research, 2005, 43, 4721 – 4743.
81. F. T. S. Chan, R. Swarnkar and M. K. Tiwari, Fuzzy goal-programming model with an artificial immune system (AIS) approach for a machine tool selection and operation allocation problem in a flexible manufacturing system, International Journal of Production Research, 2005, 43, 4147 – 4163.
82. Rakesh Ranjan, Niraj Kumar, Rupesh Kumar Pandey and M.K. Tiwari, Automatic recognition of machining features from a solid model using the 2D feature pattern, International Journal of Advanced Manufacturing Technology, 2005, 26, 861 – 869.
83. Rupesh Kumar, Santosh Kumar and M.K. Tiwari, An expert enhanced coloured fuzzy Petri net approach to reconfigurable manufacturing systems involving information delays, The International Journal of Advanced Manufacturing Technology, 2005, 26, 922 – 933.
9
84. A. K. Tripathi, M. K. Tiwari and F. T. S. Chan, Multi-agent-based approach to solve part selection and task allocation problem in flexible manufacturing systems, International Journal of Production Research, 2005, 43, 1313 – 1335.
85. V. Ravi, Ravi Shankar and M.K. Tiwari, Analyzing alternatives in reverse logistics for end-of-life computers: ANP and balanced scorecard approach, Computers & Industrial Engineering, 2005, 48, 327-356.
86. M. K. Tiwari, Prakash, A. Kumar and A R Mileham, Determination of an optimal assembly sequence using the psychoclonal algorithm, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2005, 219, 137 – 149.
87. J. Antony, M. Kumar and M. K. Tiwari, An application of Six Sigma methodology to reduce the engine-overheating problem in an automotive company, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2005, 219, 633 – 646.
88. Nishikant Mishra, Prakash, M.K. Tiwari, R. Shankar and Felix T.S. Chan, Hybrid tabu-simulated annealing based approach to solve multi-constraint product mix decision problem, Expert Systems with Applications, 2005, 29, 446-454.
89. Srinivas, Yogesh Dashora, Alok Kumar Choudhary, J. A. Harding and M. K. Tiwari, A cooperative multi colony ant optimization based approach to efficiently allocate customers to multiple distribution centers in a supply chain network, Lectures notes in Computer Sciences, 2005, 3483, pp. 680-695
90. V. Ravi and R. Shankar and M. K. Tiwari, Productivity Improvement of a Computer Hardware Supply Chain, International Journal of Productivity and Performance Management, 2005, 54, 239-255.
91. Rakesh Ranjan, Niraj Kumar, Rupesh Kumar Pandey and M.K. Tiwari, An agent-based design framework for riser and gating system design for sound casting, International Journal of Production Research, 2004, 42, 4827-4847.
92. S. P. Singh and M. K. Tiwari, Object oriented modelling and development of a dispatching algorithm for automated guided vehicles, The International Journal of Advanced Manufacturing Technology, 2004, 23, 682 – 695.
93. K.A. Singh, Srinivas and M.K. Tiwari, Modeling the slab stack shuffling problem in developing steel rolling schedules and its solution using improved GA, International Journal of Production Economics, 2004, 91, 135-147.
94. Vipul Jain, M.K. Tiwari and F.T.S. Chan, Evaluation of the supplier performance using an evolutionary fuzzy-based approach, Journal of Manufacturing Technology Management, 2004, 15, 735 – 744.
95. D. Ben-Ariah, R.R. Kumar and M.K. Tiwari, Modeling and analysis of assembly operation difficulty using enhanced expert high level colored fuzzy Petri net, Robotics and Computer Integrated Manufacturing, 2004, 20, 385-403.
96. R. Swarnkar and M.K. Tiwari, Modeling machine loading problem of FMSs and its solution methodology using hybrid tabu search and simulated annealing based heuristic approach, Robotics and Computer Integrated Manufacturing, 2004, 20, 199-209.
97. S.P.Singh and M.K. Tiwari, Object oriented modeling and development of a dispatching algorithm for AGVs, International Journal of Advanced Manufacturing Technology, 2004, 23, 682-695.
98. R. Ranjan, A.K.Singh and M.K. Tiwari, A fuzzy based algorithm to solve machine loading problem of FMS and its neuro fuzzy Petri net model, International Journal of Advanced Manufacturing Technology, 2004, 23, 318-341.
99. K.A. Singh, A. Mukherjee and M.K. Tiwari, Incorporating kin selection in SA and its performance evaluation, European Journal of Operational Research, 2004, 158, 34-45.
100. A.K. Choudhury, S.K. Mukhopadhyay and M.K. Tiwari, Application of analytical network process to solve the strategic planning problems of a supply chain cell: a case study related to pharmaceutical firm, Production Planning and Control, 2004, 15, 13-26.
101. R. Kumar, M.K. Tiwari and V. Allada, Modelling and rescheduling of a re-entrant wafer fabrication line involving machine unreliability, International Journal of Production Research, 2004, 42, 4431-4455.
10
102. Srinivas, M.K. Tiwari and V. Allada, Solving the machine loading problem in FMS using combinatorial auction based approach, International Journal of Production Research, 2004, 42, 1879-1893.
103. M.K. Tiwari and D. Roy, Solving part classification problem using simulated annealing like hybrid algorithm, Robotics and Computer Integrated Manufacturing,2003, 19, pp 415-424.
104. A.K. Singh, M.K. Tiwari and S.K. Mukhopadhyay, Modeling and planning of the disassembly processes using an enhanced expert Petri net, International Journal of Production Research, 2003, 41, 3761-3792.
105. R.P. Mohanty, S. Kumar and M.K. Tiwari, Expert enhanced colored fuzzy petri net model of traditional flexible and reconfigurable KANBAN systems, Production Planning and Control, 2003, 14, 459-477.
106. V. Jain, R. Swarnkar and M.K. Tiwari, Modeling and Analysis of wafer fabrication scheduling via Generalized Stochastic Petri net and Simulated annealing, International Journal of Production Research, 2003, 41, 3501-3527.
107. S. Kumar, R. Kumar, R. Shankar and M.K. Tiwari, Expert enhanced stochastic Petri net and its application in assembly/ disassembly, International Journal of Production Research,2003, 41, 2727-2762.
108. S. Mondal and M.K. Tiwari, Formulation of mobile agents for integration of supply chain using KLAIM concept, International Journal of Production Research,2003, 41, 97-119.
109. D. Roy, U.M.B.S. Sarma, M.K. Tiwari and S.K. Mukhopadhyay, A Part classification system using shape analysis based heuristic approach, International Journal of Advanced Manufacturing Technology, 2003, 21, pp. 355-364.
110. R. Kumar, M.K. Tiwari, and R. Shankar, Scheduling of Flexible Manufacturing Systems: An Ant colony Optimization Approach, Proceedings of Institution of Mechanical Engineers, Part B- Journal of Engineering Manufacture, 2003, 217, pp. 1443-1453.
111. M.K. Tiwari and D. Roy, Application of an evolutionary fuzzy system for the estimation of workforce deployment and cross training in an assembly environment, International Journal of Production Research, 2002, 40(18), pp. 4651-4674.
112. S.P.Singh and M.K. Tiwari, An intelligent agent framework to determine optimal conflict-free path for an automated guided vehicles system, International Journal of Production Research, 2002, 40(16), pp. 4195-4223.
113. R.Rai, V.Rai, and M.K. Tiwari, and V. Allada, Disassembly sequence generation: a Petri net based heuristic approach, International Journal of Production Research, 2002, 40(13), pp. 3183-3198.
114. R. Rai, S. Kameshwaran and M.K. Tiwari, Machine-tool selection and operation allocation in FMS: solving a fuzzy goal programming model using a genetic algorithm, International Journal of Production Research, 2002, 40(3), pp. 641-665.
115. U.M.B.S. Sarma, S. Kant, R. Rai and M.K. Tiwari, Modeling the machine loading problem of FMSs and its solution using a tabu-search based heuristic, International Journal of Computer Integrated Manufacturing, 2002, 15(4), pp. 285-295.
116. M.K. Tiwari and S.Mondal, Application of an autonomous agent network to support the architecture of a holonic manufacturing system, International Journal of Advanced Manufacturing Technology, 2002, 20, pp. 931-942.
117. M.K. Tiwari, and D.Roy, Minimization of internal shrinkage in casting using synthesis of neural network, International Journal of Smart Engineering System Design, 2002, 4, pp. 205-214.
118. M.K. Tiwari, N. Sinha, S. Kumar, R. Rai and S.K. Mukhopadhyay, A Petri net based approach to determine the disassembly strategy of a product, International Journal of Production Research, 2001, 40(5), pp. 1113-1129.
119. N.K. Vidyarthi and M.K. Tiwari, Machine loading problem of FMS: a fuzzy-based heuristic approach, International Journal of Production Research, 2001, 39(5), 953-979.
120. M.K. Tiwari, K.R.Kotaiah and S.Bhatnagar, A case based CAPP system for machining prismatic components, International Journal of Advanced Manufacturing Technology, 2001, 17, pp. 400-411.
11
121. M.K. Tiwari, M. Chandrasekharan and R.P. Mohanty, Use of timed Petri net and activity cycle diagram methodology for modeling tandem AGVs in FMS and its performance evaluation, International Journal of Computer Integrated Manufacturing, 2001, 14(4), pp. 399-408.
122. M.K. Tiwari and R.Banerjee, A decision support system for the selection of a casting process using analytic hierarchy process, Production Planning and Control, 2001, 12(7), pp. 689-694.
123. M.K. Tiwari and N.K. Vidyarthi, Solving machine loading problems in a flexible manufacturing system using a genetic algorithm based heuristic approach, International Journal of Production Research, 2000, 38(14), pp. 3357-3384.
124. M.K. Tiwari, M. Chandrasekharan and P.K. Jain, Tool management issues in FMS and its Petri net modeling, International Journal of Modeling Measurement and Control, 1998.
125. M.K. Tiwari and N.K. Vidyarthi, An integrated approach to solve process plan selection problem in automated manufacturing system, International Journal of Production Research, 1998, 36(8), pp. 2167-2184.
126. M.K. Tiwari, B. Hazarika, N.K. Vidyarthi, P. Jaggi and S.K. Mukhopadhyay, A heuristic solution approach to machine loading problem of FMS and its Petri net model, International Journal of Production Research, 1997, 35(8), pp. 2269-2284.
Conferences Proceedings (International)
1. M. Yogeswaran; S. G. Ponnambalam, and M. K. Tiwari, An efficient hybrid evolutionary heuristic using genetic algorithm and simulated annealing algorithm to solve machine loading problem in FMS, Proceedings of 3rd Annual IEEE Conference on Automation Science and Engineering, Scottsdale, AZ, USA on 22-25 Sept, 2007.
2. Nagesh Shukla, Dariusz Ceglarek, and M.K. Tiwari, Fault Diagnosis in Multi-station Assembly System using an Agent-based Simulation Model (ABSM), 2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007) to be held at Toronto, Canada on 22-24 July 2007.
3. Nagesh Shukla, Yogesh Dashora, M K Tiwari, and F T S Chan, Introducing Algorithm Portfolios to a Class of Vehicle Routing and Scheduling Problem, OSCM Conference 2007.
4. Prakash, Dariusz Ceglarek, and M.K. Tiwari, Fault failure diagnosis for complaint assembly structures using statistical modal analysis, ASME international Conference on Manufacturing Science and Engineering, 2006.
5. Manish Bachlaus, M. K. Tiwari, S. Kumar, A. Nassehi, and S. T. Newman, Web based multi agent platform for collaborative manufacturing, 3rd International CIRP Conference on Digital Enterprise Technology, 2006.
6. Felix T. S. Chan, Vikas Kumar and M.K. Tiwari, Optimizing the Performance of an Integrated Process Planning and Scheduling Problem: An AIS-FLC based approach, IEEE International Conferences on Cybernetics & Intelligent Systems (CIS) and Robotics, Automation & Mechatronics (RAM) (CIS-RAM 2006), 2006.
7. Yogesh Dashora, M.K. Tiwari and F T S Chan, “Selection of Best Alternative Process Plan Automated Manufacturing Environment: An Approach Based on Particle Swarm Optimization”, The International Conference on Flexible Automation in Manufacturing (FAIM) 2005, Bilbao, Spain. pp. 237-245, Presented by Prof. Felix T. S. Chan, Hong Kong University, Hong Kong
8. K P Karunakaran, Yogesh Dashora, M.K. Tiwari, and S. N. Dwivedi, “Solving Planning and Scheduling Problems for Web Supported Plant Chains Using Hierarchical Concepts in Ant Colony Optimization”, The 12th ISPE International Conference on Concurrent
12
Engineering: Research and Applications, (CE-2005), Texas at Dallas, Texas (USA), Presented by Prof. Suren Dwivedi, University of Louisiana at Lafayette, Lafayette, LA
9. Prakash and M. K. Tiwari, Solving a Disassembly Line Balancing Problem with Task Failure Using a Psycho-Clonal Algorithm, ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Long Beach, California, USA, 24-28th September, 2005
10. Srinivas, Yogesh Dashora, A.K. Choudhary, J.A. Harding, and M.K. Tiwari, A Cooperative Multi Colony Ant Optimization Based Approach to Efficiently Allocate Customers to Multiple Distribution Centres in a Supply Chain Network, International Conference on Computational Science and its Applications Suntec City, Singapore, May 9-12, 2005 ICSSA 2005
11. M. K. Tiwari and Maneesh Kumar, Optimization of vacuum sealed molding process using Taguchi’s Robust Design Technique and Fuzzy rule based system, First International Conference on Six Sigma, Glasgow, Scotland, 16-17th December, 2004)
12. R.R. Kumar, R. Kumar, M.K. Tiwari and S.K. Mukhopadhyay, Solving a Capacity Expansion Problem Using Ant Colony Optimization based techniques, Proceedings of 17th International Conference of Production Research, Virginia Tech, Blacksburg, VA, August 2003.
13. R. Kumar and M. K. Tiwari, Selection of Modular Design using Learning Embedded Genetic Algorithm, Proceedings of 17th International Conference of Production Research, Virginia Tech, Blacksburg, VA, August 2003.
14. V. Jain and M. K. Tiwari, “Adaptive Scheduling in Wafer Fabrication: A Fuzzy Rule based approach” Proceedings of 17th International Conference of Production Research, Virginia Tech, Blacksburg, VA, August 2003.
15. S. Kumar, M.K. Tiwari and R.Shankar, Solving a scheduling problem of FMS using cluster-oriented genetic algorithm, Proceedings of International Conference on CAD, CAM, Robotics and Autonomous Factories (Session III B), IIT Delhi, New Delhi, India, August 11-13, 2003.
16. A. Mukherjee, M.K. Tiwari and R.Shankar, “Selection of a delayed product differentiation design using nested partitions method”, Proceedings of International Conference on CAD, CAM, Robotics and Autonomous Factories (Session VI B), IIT Delhi, New Delhi, India, August 11-13, 2003.
17. V. Ravi., A. Agarwal, R. Shankar, and M. K. Tiwari, Closed Loop Supply Chain: Some Insights Proceedings of International Conference on Management of R&D(ICMARD 2003), Deptt. of Management Studies, IIT Delhi, 2003, pp. 679-685.
18. D. Roy, M.K. Tiwari, R.K. Ohdar and R. Shankar, Evaluation of supplier performance: an approach based on evolutionary fuzzy system, Proceedings of First Global Conference on Flexible System Management, New Delhi, India, December 17-20, 2000, pp.109-124.
19. U.M.B.S. Sarma, D. Roy, U.P.S. Bhushan, M.K. Tiwari and R.Shankar, Resolving the complexities of synchronization of a supply chain using simulated annealing based six sigma constrained approach, Proceedings of First Global Conference on Flexible System Management, New Delhi, India, December 17-20, 2000, pp. 619-630.
20. A. Rastogi, U.M.B.S. Sarma, M.K. Tiwari and R. Shankar, Assessment of machine and routing flexibility in a manufacturing system: A Petri net based approach, Proceedings of First Global Conference on Flexible System Management, New Delhi, India, December 17-20, 2000, pp. 811-820.
21. M.K. Tiwari, N. Sinha, S. Kumar and S.K. Mukhopadhyay, Operation planning issues for a disassembly process Proceedings of 15th International Conference on Production Research, University of Limerick, Ireland, August 9-13, 1999, pp. 491-494.
13
22. S. Kameshwaran, M.K. Tiwari and S.P. Dutta, A simulated annealing based approach to solve process plan selection problem, Proceedings of 4th Annual International Conference as Industrial Engineering Theory, Application and Practices, Texas, USA, November 17-20, 1999.
23. S.K. Tiwari, M.K. Tiwari and R.P. Mohanty, A comparative study of process plan selection problem in FMS, Second International Conference on Operations and Quantitative Management (ICOQM), Ahmedabad, January 3-6, 1999.
24. R. Rai, S. Kameshwaran and M.K. Tiwari, Solving an FMS design problem using genetic algorithms, Proceedings POMS - 99, International Conference on Operation Management in Global Economy, Challenges and Prospects, IIT Delhi, December 21-24, 1999, pp 523-528.
25. R. Rai, S. Kameshwaran and M.K. Tiwari, Solving the Markovian decision problem using genetic algorithms, Proceedings POMS - 99, International Conference on Operation Management in Global Economy, Challenges and Prospects, IIT Delhi, December 21-24, 1999, pp 545-549.
26. R.K. Ohdar, R. Shankar and M.K. Tiwari, Controlling the properties of Sinterforged Iron Powder Preform: artificial neural network approach", Proceedings POMS - 99, International Conference on Operation Management in Global Economy, Challenges and Prospects, IIT Delhi, December 21-24, 1999, pp 582-588.
27. M.K. Tiwari, N.K.Vidyarthi and S.Kameshwaran, Generalized stochastic Petri nets for modelling of assembly sequences, Proceedings POMS - 99, International Conference on Operation Management in Global Economy, Challenges and Prospects, IIT Delhi, December 21-24, 1999, pp 792-800.
28. N.K. Vidyarthi, G.D. Vidyarthi and M.K. Tiwari, Machining operation sequencing for rotational parts using fuzzy logic approach, Proceedings POMS - 99, International Conference on Operation Management in Global Economy, Challenges and Prospects, IIT Delhi, December 21-24, 1999, pp 801-807.
29. M.K. Tiwari, N.K.Vidyarthi and S.K.Mukhopadhay, Algorithms for solving process plan selection problem, Proceedings of 14th International Conference on Production Research, Osaka, Japan, August 1997, pp. 478-481.
30. S.K. Mukhopadhyay and M.K. Tiwari, Solving machine loading problems of FMS using conjoint measurement Proceedings of 13th International Conference on Production Research, Jerusalem, August 6-10, 1995, pp. 74-76.
31. M.K. Tiwari and M. Murlidhar, An expert system for casting defect analysis, Proceedings of 4th Asian Foundry Congress, Japan, 1994.
Conferences Proceedings (National)
1. S. K. Mandal, S.K. tyagi. M.K. tripathi, N. Padi, and M.K. Tiwari, Optimization of Series-Parallel System Reliability: Adaptive Memetic Particle Swarm Optimization based Approach, INCRESE-2007, International Conference on Reliability and Safety Engineering, Indian Institute of Technology Kharagpur, 17-19 December 2007.
2. V.V. Kumar, M. tripathi, S.K.Tyagi, S.K. Shukla, and M.K.Tiwari, An Integrated Real Tiem Optimization Approach (IRTO) for Physical Programming based Redundancy Allocation Problem, INCRESE-2007, International Conference on Reliability and Safety Engineering, Indian Institute of Technology Kharagpur, 17-19 December 2007.
3. Optimizing The Operational Design of A Supply Chain Network Using The Psychoclonal algorithm” Sanjay Kumar Shukla, Ravi Shankar, M. K. Tiwari (Accepted for publication in 10th Annual Conference of the Society of Operations Management (ASCOM), Indian Institute of Management, Ahmedabad, India, December 21-23, 2006.)
14
4. Exploring Six sigma to reduce demand variation in supply chain, Amol Ghorpade, M. K. Tiwari., Conference on Quality and Reliability CQR 2006, Rourkela (India), November 4th, 2006
5. A. Keshari, Yogesh Dashora and M. K. Tiwari, Design of Efficient Cluster Architectures and Communication Protocols: A Framework for Distributed Microflow Sensor Networks, Emerging Trends in Nano-Technology and Innovations in Design and Manufacturing-ETNDM-2006, Rourkela (India), 18th February, 2006
6. V. Pandey, S. Kumar and M.K. Tiwari. "Artificial Intelligence and its impact on CAD/CAM", Proceedings of AMTEG, January 21-22, 2005.
7. S.C. Srivastava, A. K. Choudhary, Surendra Kumar and M.K.Tiwari “Part Selection and Operation Allocation on machines in an FMS for Sheet Metal Processing using Genetic Algorithm with Chromosome Differentiation based Approach” Proceedings of AMTEG, JANUARY 21-22, 2005.
8. R. K. Singh, S. Kumar, and M. K. Tiwari, “A Theory of Constraint based Product mix Decision Problem: A Hybrid Tabu-Simulated Annealing Based Approach” AMTIDR, Pune, January, 2005.
9. M. K. Tiwari, “Web Supported Engineering Education and Training: A Modern Tool to Improve Learning Process” National Conference on Curriculum Development for Technical Education, 3-4 th April, 2005 at BIT Mesra.
10. Kamlesh Kumar, Maneesh Kumar, M. K. Tiwari, “Determination of Optimal Parameter for Finishing Advanced Ceramic Balls: An Approach Based On Grey Relational Analysis”, National Workshop on Six Sigma Implementation in Foundry / Forge Industries, NIFFT, Ranchi, April 2004, pp 113-124.
11. Saurabh Mishra, Maneesh Kumar, Rohit Pratap Singh, M. K. Tiwari, “Six Sigma Applications to the Sheet Metal Forming by Deep Drawing and determining the Key Process Variables”, National Workshop on Six Sigma Implementation in Foundry / Forge Industries, NIFFT, Ranchi, April 2004, pp 102-112 .
12. Jitendra Kumar, Maneesh Kumar, Kumar Ashutosh Singh, M. K. Tiwari, “Optimization of the parameters of Electrical discharge machining process: An approach based on PCR-TOPSIS”, National Workshop on Six Sigma Implementation in Foundry / Forge Industries, NIFFT, Ranchi, April 2004, pp 92-101.
13. Amit Gupta, Abhiranjan Anand, Maneesh Kumar, M. K. Tiwari, “The Determination of Optimal Burnishing Parameters of Freeform Surface Finish of Plastic Injection Mold Using A Six Sigma Based Methodology”, National Workshop on Six Sigma Implementation in Foundry / Forge Industries, NIFFT, Ranchi, April 2004, pp 58-65.
14. Amit Kumar Sinha, Anand Mohan Choubey, A. K. Choudhury, M. K. Tiwari, “ Selection of Casting Process using Analytical Hierarchy Process (AHP) based Six Sigma Compliant Approach”, National Workshop on Six Sigma Implementation in Foundry / Forge Industries, NIFFT, Ranchi, April 2004, pp 66-75.
15. Anand Mohan Choubey, Alok Kumar Choudhary, M. K. Tiwari, “Solving Tolerance Allocation Problem of Casting Processes: A Genetic Algorithm Based Six Sigma Constrained Approach” National Workshop on Six Sigma Implementation in Foundry / Forge Industries, NIFFT, Ranchi, April 2004, pp 81-91.
16. Ravindra Kumar, Jayant Kumar, M. K. Tiwari, “Optimizing The Die Casting Process Parameters Using Six Sigma Supported Approach”, National Workshop on Six Sigma Implementation in Foundry / Forge Industries, NIFFT, Ranchi, April 2004, pp 125-138.
17. Prakash, Sanjeev Kumar, Shashi Kumar, M. K. Tiwari, “Optimization Of A Centerless Grinding Operation- A Six Sigma Approach”, National Workshop on Six Sigma Implementation in Foundry / Forge Industries, NIFFT, Ranchi, April 2004, pp 139-147.
15
18. Raj Bardhan Anand, Akhilesh Kumar, K. K. Verma, M. K. Tiwari, “ Optimization of Electrical Discharge Machining process using Taguchi’s Quality Loss Function and Fuzzy Rule based system”, National Workshop on Six Sigma Implementation in Foundry / Forge Industries, NIFFT, Ranchi, April 2004, pp 148-155.
19. P. Vrat, R. Shankar, M.K. Tiwari, Srinivas and M. Soleymanpour, "Transiently chaotic neural network approach for transportation problem", Proceedings of the National Conference on Transportation Systems (NCTS), IIT Delhi, India, April 24-25, 2002.
20. M.K. Tiwari, S. Mondal and R. Shankar, "An effective heuristic approach for resolving the shipping problem from an origin to a destination in presence of discrete shipping frequency", Proceedings of the National Conference on Transportation Systems (NCTS), IIT Delhi, India, April 24-25, 2002.
21. M.K. Tiwari, R. Kumar, and R. Shankar, "Solving a vehicle routing problem using ant colony optimization based algorithm", Proceedings of the National Conference on Transportation Systems (NCTS), IIT Delhi, India, April 24-25, 2002.
22. M.K.Tiwari and N.K. Vidyarthi, "A neural network approach for solving a control problem of FMS", 11th Indian Society of Mechanical Engineering, IIT Delhi, February 3-5, 1999.
23. A. Pal, S. Jha and M.K. Tiwari, "Computer aided process planning: a neuro expert system approach", Proceedings of 21st National Systems Conference NSC'97, Hyderabad, India, January 20-24, 1998.
24. M.K. Tiwari, N.K. Vidyarthi, "Solving process plan selection problem using simulated annealing algorithm", Proceedings of 30th Annual Convention of Operation Research Society of India (ORSI), Jamshedpur, December 22-24, 1997.
25. M.K. Tiwari, N.K. Vidyarthi, "Cell formation in group technology: a genetic algorithm approach", Proceedings of 30th Annual Convention of ORSI, Jamshedpur, December 22-24, 1997.
26. M.K. Tiwari, N.K. Vidyarthi, "Modeling of alternative process plans by Petri nets and a fuzzy logic approach to select optimum process plan", Accepted for presentation and publication in 17th AIMTDR Conference, REC Warangal, January 9-11, 1997.
27. M.K. Tiwari, M. Chandrasekharan and P.K. Jain, "A heuristic solution approach to solve the loading problem of flexible assembly system", Proceedings of 10th ISME Conference, Delhi, India, December 10, 1996.
28. M.K.Tiwari, N.D.Vaini and P.K.Jain, "Optimization of multistage systems for the minimization of work-in-process", Proceedings of 29th Annual Convention of Operation Research Society of India (ORSI), IIT Bombay, 1996.
National Journal
A. Agarwal, R. Shankar and M.K. Tiwari, Agility of supply chains: a study of some sectoral dissimilarities, Productivity, 2005, 45(3) pp. 396-403.
A. Ranjan, G. Mishra and M.K. Tiwari, Machine Selection: A Fuzzy Multi Attribute Decision Making (FMADM) Approach, Journal of Advances in Management Research, 2004,1( 2), pp. 60-72.
Popular Articles
K. P. Karunakaran and M.K. Tiwari, Rapid product development A manufacturing survival, Modern Machine Tools, 2005, pp. 76-80
Articles Communicated to International Journals
1. Mayank Kumar Pandey, R. K. Singh, S. Venkataramanaiah, and M. K. Tiwari, Sequential metamodelling applications to improve porthole die design problem,
16
submitted to Proceedings of Institute of Mechanical Engineering Part: B Journal of Engineering Manufacture.
2. Nitesh Khilwani, M. K. Tiwari, and Ihsan Sabuncuoglu, Hybrid Petri-nets for Modeling, Performance Evaluation and Risk Management of Supply Chains, Submitted to IEEE Transactions on Engineering Management
3. Fatih Safa Erenay, Ihsan Sabuncuoğlu, Ayşegül Toptal, and M. K. Tiwari, New solution methods for single machine bicriteria scheduling problem: minimization of average flowtime and number of tardy jobs, submitted to International Journal of Production Research
4. Nagesh Shukla, M. K. Tiwari, and Dariusz Ceglarek, Algorithm Portfolios for Fast Optimization, submitted to Engineering Applications of Artificial Intelligence. (Favorably reviewed)
5. Sanjay Kumar Shukla, Ravi Shankar and M. K. Tiwari, Optimizing the Operational Design of a Supply Chain Network Using the Psychoclonal Algorithm, submitted to Computers & Industrial Engineering (CAIE-06-412)
6. Sanjay Kumar Shukla and M. K. Tiwari, GA Guided Cluster Based Fuzzy Decision Tree for Reactive Ion Etching Modeling: A Data Mining Approach, Submitted to IEEE Transactions on Semiconductor Engineering (IEEE-TSM 5088) (Favorably reviewed)
7. Nishikant Mishra, Alok Kumar Choudhary, M. K. Tiwari, and David Naso, Genetic Algorithms with Chromosome Differentiation for Integrated Planning and Scheduling in Multi Plant Supply Chain, submitted to IEEE Transactions Engineering Management (TEM-06-0280)
8. Ajit Kumar Sahoo, M.K. Tiwari, and Ming Zuo, Developing a multi-agent frame work supporting the computational grid environment to resolve job scheduling problem, submitted to Parallel Computing (PARCO-D-06-00073)
9. R.P. Singh, Prakash, M.K. Tiwari and Ravi Shankar, Customizability analysis through Design for Modularity using CLONALG, submitted to International Journal of Production Research (TPRS-2006-IJPR-0822)
10. Amol Ghorpade, M. K. Tiwari, and Jiju Antony, Optimization of deep drawing design parameters - A physical programming approach, Submitted to European Journal of Operation Research (Favorably Reviewed)
11. Amol Ghorpade, M.K.Tiwari, and Jiju Antony, Introducing six sigma: A process improvement strategy for shape of anvil, submitted to International Journal of Production Economics
12. Manish Shukla, Ravi Shankar, and M. K. Tiwari, B2B Multiattribute E-procurement: An Artificial Immune System based Goal Programm
tion Economiing approach, submitted to
International Journal Produc cs (012606)
Shubham Agrawal and M. K. Tiwari, Algorithm Portfolio Conceptualization to Multiobjective Disassembly
13. Line Balancing, submitted to Computers and Industrial
Engineering (CAIE-06-315)
Gaurav Singh, Yogesh Dashora,14. mitted to International Journal of Advanced
and M. K. Tiwari, QFD Optimizer: An Approach Based on Multidimensional Scaling, subManufacturing Technology (IJAMT994)
S.R. Yadav, M. K. Tiwari and Ravi Shankar, An algorithm portfolio based solution methodology to solve a supply chain optimiz
15. ation problem, submitted to Omega-The
International Journal of Management Science
D. Ben-Arieh, Anand Mohan Choubey, Nitesh Khilwani, M. K. Tiwari, and Ravi Shankar, A Group Decision Making approach to resolve Vendor Selection Problem of a
16.
17
Telecom Company, submitted to Computers and Industrial Engineering (Favorably Reviewed)
Yogesh Dashora, M. K. Tiwari, K. P. Karunakaran and S. N. Dwivedi, Theoretical and experimental insights to algorithm of hierarc
17. hical ants: a concurrent planning and
scheduling paradigm in web supported plant chains, submitted to IMechE Part B: Journal of Engineering Manufacture (JEM616)
Chetan C Mahajan, Yogesh Dashora, M K Tiwari, and Ravi Shanka18. r, Design of Optimal Computer Network Topologies: An Artificial Immune System based Approach, submitted to Computers and Operation Research (COR-2005-023)
Gaurav Singh, Roger Maull, Nishikant Mishra, Ravi Shankar, and M. K. Tiwari, 19. a Real Time Modeling and Solving Facility Layout problem Using an Effective Variant
of Ant Algorithm, submitted to European Journal of Operational Research (EJOR-06-00110)
20. Nitesh Khilwani, M.K. Tiwari, Ravi Shankar, and David Ben-Arieh, A Met for Distributed Facility Layout Problem, submitted to Computers and Operations
a-Heuristic
Research
21. Nagesh Shukla, Yogesh Dashora, Ravi Shankar, F T S Chan, and M. K. Tiwari, Conceiving Algorithm Portfolio to Vehicle Routing Problem with Stochastic Demands and Mobility Allowance submitted to Computational Intelligence
22. Gaurav Singh, Yogesh Dashora, A. K. Choudhary, M. K. Tiwari and David Naso, A Compact Memetic Algorithm Incorporating Adaptive Probability Update, Submitted to International Journal of Artificial Intelligence Tools (Favorably Reviewed)
23. Nitesh Khilwani, Amol Ghorpade, S. B. Kumar, and M. K. Tiwari, Material Selection for Engineering Component: A Group Decision Making Approach, submitted to Journal of Material Processing Technology (PROTEC-D-06-00241)
24. Vikas Kumar, Sanjeev Kumar, M. K. Tiwari and F. T. S. Chan, Performance Measurement of FMS Under Uncertain and Dynamic Situations, submitted to International Journal of Flexible Manufacturing System
M.K. T25. iwari, S. K. Jha and Raj Bardhan Anand, Operation Allocation on machines in E-Manufacturing: An auction-based heuristic supported by agent technology, submitted to Robotics and Computer Integrated Manufacturing (Favorably reviewed) (RCIM 05-0805)
Yogesh D26. ashora, Nagesh Shukla, Chetan C. Mahajan, Ravi Shankar and M. K. Tiwari, Towards Optimal Design of Computer Network Topologies: A Vroom Inspired Psychoclonal Algorithm, International Journal of Parallel and Emergent Distributed System
27. Arvind Kumar and M. K. Tiwari, A Heuristic Approach to Balance and Sequence Mixed-model Assembly Lines, submitted to Robotics and Computer Integrated Manufacturing (06-0412)
28. Prakash, R. Shankar and M. K. Tiwari., Scheduling in Manufacturing supply Chain using Psycho-clonal Algorithm, Submitted to IEEE Transaction of Evolutionary Computation. (IEEE TEC # 1022)
29. Akhilesh Kumar, M. K. Tiwari Continuous flow shop S
and R. Shankar, Psycho-Clonal Algorithm to Solve cheduling Problem, International Journal of Production
Economics (Communicated by Dr. R. Shankar)
Books/Course Materials
Anoop Prakash, Nagesh Shukla, R. Shankar, and M.K. Tiwari, Solving machine loading problem of FMS: An artificial intelligence
List of
• (AI) based random search optimization
approach, Handbook of Computational Intelligence in Manufacturing and Production
18
Management: A book edited by Dr. Dipak Laha, and Dr. Purnendu Mandal, Lamar University, USA, Idea Group Publishing Mukul Tripathy, Shuham Agrawal, and M.K. Tiwari, The disassembly sequencing problem: Resolving the complexity by
• random search techniques, a book on
Environmentally Conscious Manufacturing, edited by Prof. S.M. Gupta and Prof. A.J.D. Lambert, published by Taylor and Francis
• jects for Indira Gandhi National Open
4• material on “Design for Manufacturing”, for Institution of
List of papers (Completed manuscript) Accepted for Presentation and Publication in the Inte
1. M.K. Tiwari FMS, International
Authored course material on following subUniversity (IGNOU), New Delhi: 1. Computer Integrated and Manufacturing 2. Tool Engineering and Management 3. Manufacturing Systems Integration and Control . Production and Operation Management Co-Authored a courseEngineers, Kolkata.
rnational Conferences but could not be presented
Nitesh Khilwani, Anoop Prakash, Yogesh Dashora and , Using fast es ofimmune search to solve the criticaliti Manufacturing Leaders
Forum (IMLF) Conference, 2006, Taiwan.
Amol Ghorpade, Yogesh Dashora, M. K. Tiwari and K. P. Karunakaran, Introducing Hierarchical Particle Swarm Optimization to Optimal Part Orientation in Fused Deposition Modeling, Proceedings of DETC/CIE 2006 ASME 2006, Internation
2.
alDesign Engineering Information in Engineering Conferences, 32& Computers and nd Design Automation Conference, September 2006, Philadelphia, Pennsylvania USA
Nagesh Shukla, M K Tiwari, R Shankar, “Multi Station manufacturing Process and optimal sensor distribution using chaos embedded fast simulated annealing,” Proceedings of DETC/CIE 2006 ASME 2006 International Design Engineering &
3.
Computers and Information in Enginee ces, 11ring Conferen th Design for Manufacturing and the Lifecycle Conference, September 2006, Philadelphia, Pennsylvania USA
Gaurav Singh, Dariusz Ceglarek, and M.K. Tiwari, Sensor optimization for online 4. operations in dimonitoring of multi station assembly gital manufacturing environment,
3rd International CIRP seminar on Digital Enterprise technology, 18-20, Sept. 2006.
R. Kumar, R.R. Kumar, R. Rai and M.K. Tiwari, Selection of modular design using learning emb
5. edded genetic algorithms, 17th International Conference of Production
Research, Virginia Tech, Blacksburg, VA, August 2003.
M.K. Tiwari and V. Jain, Adaptive Scheduling in Wafer Fab: A Fuzzy Rules Based 6. approach, 17th International Conference of Production Research, Virginia Tech, Blacksburg, VA, August 2003.
R. Swarnkar, M.K. Tiwari and S.K. Mukhopadhyay, Relocation of machine manufacturi
7. s in a reconfigurable ng system: a simulated annealing based approach, 16th International Conference on Production Research, Czech Republic, August 2001.
K.A. Singh, M.K. Tiwari and S.K. Mukhopadhyay, An efficient statistical tolerancing based heuristi
8. c approach to design synchronized supply chain network, 16th International
Conference on Production Research, Czech Republic, August 2001.
M.K. Tiwari, N.K. Vidyarthi and S.K. Mukhopadhyay, A progressive approach to process plan selecti
9. on and part sequencing, 21st International on Computers Industrial
Engineering, San Juan, Puerto Rico, USA, March 10-12, 1997
M.K. Tiwari and N.K. Vidyarthi, A similarity measurement approach to process plan or Manufact
10. selection, Technology f uring: An international Conference, Msaaey University, Palmerston North, New Zealand, February 12-13, 1997.
19
11. M. Chandrasekharan, M.K. Tiwari and P.K.Jain, Petri net based approach to model the functioning of a CIM system, 21st International Conference on Computer and Industrial Engineering, San Juan, Puerto Rico, USA, March 10-12, 1997.
12. S. Kameshwaran and M.K. Tiwari, Development of neuro based system for grouping of parts, 13th ISPE/IEE, International Conference on CAD/CAM/Robotics and Factories of Future, Columbia, South America, December 15-17, 1997
13. S. Kameshwaran and M.K. Tiwari, CTPN model for manufacturing control systems, 13th ISPE/IEE, International Conference on CAD/CAM/Robotics and Factories of Future, Columbia, South America, December 15-17, 1997
P.K. Jain14. and M.K. Tiwari, Petri net based modeling and evaluation of flexible manufacturing process plans, 5th International Conference on Human Aspects of Advanced Manufacturing: Agility & Hybrid Automation, Maui, Hawaii, USA, August 6-9, 1996.
15. P.K. Jain, M.K. Tiwari and P.C. Pande, Petri net approach for representing the alternative for process plans, 4th International Conference on Control, Automation, Robotics and Vision (ICARCV '96), Westin, Singapore, December 3-6, 1996.
16. D. Mishra, M.K. Tiwari and R.P. Mohanty, Economics justification for computer integrated manufacturing system using break even analysis, 1st International Conference of Engineering Design and Automation, Bangkok, Thailand, March 18-21, 1996.
M.K. Tiwari, APT/CNC part program generation for turned parts 117. P.K. Jain and st l conference of engineering Design and AutomationInternationa , Bangkok, Thailand,
Rese
lated
ced high
Analysis of miniaturized electromagnetic devices using evolution algorithms with fast EFSA)
10. et
•
ct Impleme I nsible to implement World Bank project,
March 18-21, 1996
arch Reports
1. Adaptive production control system: A Genetic Algorithm and Neural Network based approach
2. Development of framework for e-manufacturing eduling Wafer Fabrication: A Simu3. Simulation and Analysis of Practical Issues in Sch
Annealing Based Approach 4. Hole quality evaluation in reaming an evolutionary fuzzy system 5. Evaluation of engineering design with imprecise parameter: a fuzzy based approach 6. A GA approach for slab stack shuffling problem 7. Process plan selection problem: a game theory based heuristic approach 8. Generating a robust schedule for a wafer fabrication facility via expert enhan
level colored time Petri net and neuro-simulated annealing based heuristic 9.
simulated annealing based approach ( Analysis of assembly operation difficulty using advanced expert fuzzy Petri n
Institutional Development Project
Technical Education Quality Improvement Programme (TEQIP)
To develop the institute and modernize the laboratories, I took the lead and prepared comprehensive project documents. After presentation and scrutiny, National Proje
ntation Unit (NP U), a body respoconsidered NIFFT in the category of Lead Institutions. Under this project, institute received a grant of Rs. 14 Crore (US $3.04 Million) and I am acting as a coordinator of the project.
Campus wide Networking (CWN)
This project was of worth Rs 1.5 Crore (US $ 0.32 Million). Its proposal was prepared by me and under the plan grant of the institute. The project was sanctioned by Board of Governors and controlling Ministry (year 2002). I was convener of the project. Here, main task was to prepare the specifications of networking components and other hardwares and softwares by
20
involving experts from premier institutions like IIT’s. I have coordinated each and every activity, right from selection of networking experts, procurement consultant, floating of the
• oordinator, I prepared the documents and supervised the visit of National Board of
• Presented the case of NIFFT before the University Grant Commission for Deemed to be s. Commission agreed to send an expert team to assess the institute and its
proposal (2005).
Ind
7).
.
ues (2004)
oundry/Forge and
• sponse Manufacturing (2003)
nals of ACC Ltd., Mumbai (2003)
ittee to develop the tool room by Govt. Jharkhand, Ranchi.
Con b
• Developing CAD lab at NIFFT, Ranchi (2005-Onwards)
ing Machine shop, Tool room, Welding shop in the department of mechanical engineering at NERIST, Itanagar, (1992-1998)
Contrib
• ed the syllabus of theory and practical contents related to Industrial Engineering, Operational Research, CAM, AI & Robotics Manufacturing Science,
advertisement, evaluation of tenders, installation and commissioning, and finally certification. Now project has been completed and each and every segment of the institute is connected with internet.
As a cAccreditation (NBA) team deputed by AICTE. It was a massive coordinated effort from various agencies and departments and all the six programs got accredited by the team in 2004.
University statu
ustrial Services
• Delivered Special Lectures on Project Management to the Executives of Mccnally Bharat Ltd., Kolkata (September 200
• Acting as a consultant to the Indian Air Force for Implementing the Lean Engineering and Management Philosophies
• Developed resource material for selection of executive trainees for ACC Cement Ltd., Mumbai (2005 and 2007)
• Delivered lectures to the graduate engineer trainees of ACC Ltd., Mumbai on implementation of project management techniq
• Organized a National level Workshop on Six Sigma Implementation in Fother allied Manufacturing Industries (2004).
Conducted a week long course on Quick Re
• Delivered special lectures on inventory control at IIT Kharagpur for the working professio
• Participated as a member of expert comm
tri ution to Laboratory Development
• Developed a Research Promotion Cell at NIFFT, Ranchi (2004)
• Developed Internet Laboratory at NIFFT, Ranchi (2005)
Involved in
• Involved in modernizing the laboratories of Forge Department, NIFFT, Ranchi (2005-Onwards)
• Development a Computer Integrated Manufacturing System Lab in the Tool Room of the Mechanical Engineering Department, NERIST (1993).
• Associated with development of establish
ution to the Curriculum Development
• Member of a committee that looks into the syllabus revision for U.G. and Graduate program related to manufacturing engineering at NIFFT, Ranchi (1999)
Develop
21
Production Engineering, etc. at NERIST, Itanagar, (1990-1998) and NIFFT, Ranchi (2004)
• Co-coordinator for preparing and presenting the proposal of a Graduate Program on CAD/CAM by Mechanical Engineering department at NERIST, Itanagar (1996-1997)
and course structure for IGNOU, New Delhi (2004-2006).
Admini
• NIFFT, Ranchi (March 2007 - Onward)
and Graduate students at
• )
ns and parliamentary elections as
• 997) at NERIST, Itanagar
n conducting the entrance examination at different places for Under graduate raduate students
Soc
•
• and several students have been placed in
ta Motors, TELCON, Infosys, GE Power, GE foundry/forge industries.
Res c
nt, University of Missouri-Rolla, USA
6. nt of Mechanical Engineering, University of Bath, UK
UK
• Developed the syllabus
strative Assignments
Head of the Department, Forge Technology,
• In-charge of Training and Placement for Under GraduateNIFFT, Ranchi (1998-2001)
• Team member to select a security agency for NIFTT (2005)
Team member to select civil work contractors at NIFFT (2001-2004
• Three times participated in conducting assembly electioa patrolling magistrate and sector magistrate in Ranchi (1998-2005)
Transport Chairman (1996-1
• Involved iand post g
ial Activities
Helping the students of weaker sections to pursue the higher studies.
Counseling the students about the various aspects of personality test and interviews. Such efforts have yielded surprising resultssome of the leading enterprises like TaCapital and many
ear h Collaborators
1. Prof. Y.J. Son, Department of Systems and Industrial Engineering, The University of
Arizona, Tucson, AZ, USA
2. Prof. Darek Ceglarek, Department of Industrial Engineering, University of Wisconsin –
Madison, Wisconsin, USA
3. Prof. David Ben Ariah, Department of Manufacture and system Engineering, Kansas
State University, Kansas, USA
4. Prof. Venkat Allada, Department of Engineering Management and Systems Engineering,
Engineering Manageme
5. Prof. Ming J. Zuo , Department of Mechanical Engineering, University of Alberta,
Edmonton, Canada
Prof. Stephan Newman, Departme
7. Dr. Jenny Harding, Wolfson School of Mechanical and Manufacturing Engineering,
Loughborough University,
8. Prof. Roger Maull, Department of Management, School of Business and Economics,
University of Exeter, UK
22
9. Prof. Jiju Antony, Director of CRISSPI, Division of Management, Caledonian Business
School, Glasgow Caledonian University, Glasgow, Scotland, UK
ol of Business-Camden of Rutgers, The State University of New Jersey, USA
Hong Kong
Indian
Institute of Technology Delhi, New Delhi, India
t, ACC Cements Limited, Mumbai, India
Eminen
10. Prof. David Naso, Dipartimento di Elettrotecnica ed Elettronica, Politecnico di Bari,
Bari, Italy
11. Prof. Yuval Cohen, Department of Management and Economics, The Open University
of Israel, Israel
12. Prof. Alok Baveja, Associate Professor, Information and Management Sciences at the
Scho
13. Prof. A.R. Mileham, Department of Mechanical Engineering, University of Bath, Bath,
UK
14. Prof. F.T.S. Chan, Department of Industrial & Manufacturing Systems Engineering, The
University of Hong Kong,
15. Prof. Ravi Shankar, Department of Management Studies, Indian Institute of Technology
Delhi, New Delhi, India
16. Prof. K.P. Karunakaran, Associate professor, Department of Mechanical Engineering,
Indian Institute of Technology Bombay, Mumbai.
17. Dr. B. K. Panigrahi, Assistant Professor, Department of Electrical Engineering,
18. Prof. R.P. Mohanty, Ex- Vice Presiden
t Academicians well known to me
1. Prof. A. Y. C. Nee, Department of Mechanical and Production Engineering, National University of Singapore, Singapore <mp >
e.wisc.edu2. Prof. Darek Ceglarek, Department of Industrial Engineering, University of Wisconsin-
Madison, USA <darek@ca >
3. Prof. V. Allada, Department of Engineering Management, University of Missouri - Rolla, USA <[email protected]>
4. Prof. Stephan Newman, Department of Mechanical Engineering, University of Bath, UK <[email protected]>
5. Prof. Roger Maull, Department of Management, School of Business and Economics, University of Exeter, UK <[email protected]>
6. Dr. Jenny Harding, Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, UK, <[email protected]>
7. Prof. D. Ben-Ariah, Department of Industrial Engineering, Kansas state University, <[email protected]>
8. Prof. Y. Narhari, Department of Computer Science and Automation, Indian Institute of Science, Bangalore, India <[email protected]>
9. Prof. S.G. Deshmukh, Department of Mechanical Engineering, Indian Institute of Technology Delhi, New Delhi, India <[email protected]>
23
