Embed Size (px)
Citation preview
Radio / CD
Dakota DJ50Modena CD50Sylt CD50
Operating instructions
2
Bitte aufklappen
Open here
Ouvrir s.v.p.
Aprite la pagina
Hier openslaan a.u.b.
Öppna
Por favor, abrir
Favor abrir
3
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
3
2
10
1
4
5
11
6
7 98
1213141516
25
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
1 button to unlock releasepanel
2 Volume control3 ON button, switches the unit on/
off, mute4 RDS button, switches the RDS
convenience features on/offSelects display for variable text
5 BND button, selects the FMmemory bank and the MW andLW wavebands (the Sylt CD50does not include MW/LW radio)TS, starts the TravelStore func-tion
6 Display7 button, displays the time
DIS button, changes displaycontents
8 MENU button, accesses themenu for basic settings
9 button, opens the flip releasepanel
: Cursor button block; OK button, confirms menu se-
lections and starts the SCANfunction
< EQ button, adjusts the equalizer= AUD button, adjusts bass, treble,
balance and faderLD, switches the Loudness func-tion on/off
> 1 to 6 station buttons? TRAF button, switches traffic in-
formation standby on/off@ CD•C button, switches sound
source between radio, CD andCD changer (if connected)
OPERATING ELEMENTS
26
CONTENTS
Important information ............ 27Traffic safety .................................. 27Installation ..................................... 27Accessories .................................. 27Guarantee ..................................... 27International telephone information . 27
Removable front panel ........... 28Theft protection system ................. 28Removing the operating panel ........ 28Replacing the operating panel ....... 28
Switching the car audiosystem on/off ......................... 29
Volume control ....................... 30Adjusting the power-on volume ...... 30Mute ............................................. 30Mute during telephone operation ... 30Adjusting the volume of the beep ... 31
Radio operation...................... 31Switching to the radio mode .......... 31Special RDS functions (AF, REG) .. 31Selecting wavebands/memorybanks ............................................ 32Tuning into radio stations ............... 32Adjusting seek tuning sensitivity ..... 33Storing radio stations ..................... 33Storing radio stations automatically(TravelStore) .................................. 33Recalling stored radio stations ....... 33Scanning the radio stations withinreception range (SCAN) ................ 33Adjusting the scan time ................. 34Program Type (PTY) ...................... 34Optimising radio reception ............. 35Selecting the display of variable text 35
Traffic information reception . 36
CD player operation ............... 37Starting CD player operation ......... 37Selecting tracks ............................ 37
Audible fast forward/reverse(CUE/REVIEW) ............................. 37Playing tracks in random order(MIX) ............................................. 37Scanning tracks (SCAN) ............... 37Repeating individual tracks(REPEAT) ...................................... 38Interrupting playback (PAUSE) ...... 38Switching the display mode ........... 38Traffic radio information during CDplayback ........................................ 38
CD changer operation............ 39Starting CD changer operation ...... 39Selecting CDs ............................... 39Selecting tracks ............................ 39Audible fast forward/reverse (CUE/REVIEW) ...................................... 39Switching the display mode ........... 39Repeating individual tracks or entireCDs (REPEAT) .............................. 39Playing tracks in random order(MIX) ............................................. 39Scanning all of the tracks on all ofthe CDs (SCAN) ........................... 40Interrupting playback (PAUSE) ...... 40
Clock ...................................... 40
Adjusting the tone andbalance/fader ........................ 42
Switching Loudness on/off .... 42
Equalizer ................................ 43Notes on making the settings ......... 43Adjusting the equalizer ................... 43Assistance in setting your equaliser 44Adjusting the spectrometer ............ 44
External audio sources .......... 45
Specifications ........................ 45
Installation instructions ........ 171
27
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
Important informationBefore you use your car audio systemfor the first time, please take the time toread the instruction manual carefullyand make yourself familiar with the au-dio equipment. Keep this manual handyin your car for future reference.
Traffic safety Traffic safety is always the top
priority. Do not attempt to operateyour car audio system unless the traf-fic conditions permit. Familiarizeyourself with the equipment beforeyou start driving.Always make sure that you are stillable to hear any warning signalscoming from outside the vehicle,such as police or fire engine sirens,at all times.As a result, please always select amoderate volume for playing your caraudio system while you are driving.
InstallationIf you would like to install your new carstereo yourself or add other audio com-ponents to the existing ones, thenplease read the instructions on installa-tion and connection at the end of thismanual carefully.
AccessoriesUse only Blaupunkt-approved accesso-ries.
Remote control unitThe optionally available RC 08 infraredremote control unit allows you to con-veniently operate the most importantsystem functions from the steeringwheel.
IMPORTANT INFORMATIONAmplifiersAll Blaupunkt amplifiers can be used.
CD changersThe following CD changers can be con-nected directly: CDC A 06, CDC A 08,CDC A 072 and IDC A 09.The CDC A 05 and CDC A 071 can beconnected with an adapter cable (Blau-punkt no. 7 607 889 093).
GuaranteeThe scope of the guarantee is deter-mined by the laws in the country wherethe unit is purchased.Regardless of the legal guarantee reg-ulations, Blaupunkt affords a 12-monthguarantee.If you have any questions about theguarantee, please contact your author-ised Blaupunkt dealer. Your cash regis-ter receipt is a valid guarantee coupon.
International telephoneinformationHave you got any questions on the op-eration of this equipment or do you re-quire more information?Give us a call!You will find the international telephoneand fax numbers on the last page of thismanual.
28
Removable front panel
Theft protection systemTo prevent your car audio system frombeing stolen, it has been equipped witha removable front panel (flip releasepanel). Without the front panel, the caraudio system is useless to thieves.Protect your car audio system againsttheft and take the operating panel withyou each time you leave the vehicle.Never leave the release panel in the car,even if it is well hidden. The panel hasbeen designed so that it is easy to re-move.
Notes:● Do not drop the release panel.
● Do not expose the release panel todirect sunlight or other heat sourc-es.
● Store the release panel in the casesupplied.
Removing the operating panel➮ Press 1.
The release panel will unlock.
1
➮ First pull the operating panel for-ward and then slide it to the left toremove it.
● When you remove the operatingpanel, the car audio system will au-tomatically switch off.
● All of the settings will remainstored.
● A CD inserted into the car audiosystem will remain in place.
Replacing the operating panel➮ Slide the operating panel into the
guides from left to right.
➮ Press the left-hand side of the pan-el onto the car audio system until itlocks into place.
Note:● While replacing the panel, be care-
ful not to press on the display.
If the car audio system was on whenyou removed the panel, it will automat-ically switch back on using the samesettings when you replace it (radio, CDplayer or CD changer).
REMOVABLE FRONT PANEL
29
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
Switching the car audio system onby inserting a CDIf the system is switched off and thereis no CD in the CD player,
➮ press 9.
The flip release panel will open.
➮ Insert the CD into the CD playerwith the label facing upwards untilyou feel resistance. Do not useforce.
The CD will be pulled automatically intothe CD player.Do not attempt to assist or prevent thisprocess.
➮ Press the operating panel closedgently until you feel it click intoplace.
The audio system will switch on. CDplayback will begin.
Switching the car audiosystem on/offThe car audio system can be switchedon/off in a number of ways.
Switching the car audio system on/off with the ignitionIf the car audio system has been con-nected to your vehicle ignition, it is pos-sible to switch it on and off with the igni-tion.
You can also switch the car audio sys-tem on when the ignition is switched off.
➮ Press down and hold 3 until thecar audio system switches on.
Note:To prevent the car battery from runningdown, the radio will switch off again au-tomatically after one hour.
Switching the car audio system on/off with the removable front panel
➮ Remove the release panel.
The car audio system will switch off.
➮ Replace the release panel.
The car audio system will switch onagain. The last settings used (radio, CDplayer or CD changer) will be activated.
Switching the car audio system on/off by pressing 3
➮ Press 3 to switch the car audiosystem on.
➮ Press 3 for longer than 2 secondsto switch the car audio system offagain.
The system will then switch off.
SWITCHING ON/OFF
30
Volume controlThe car audio system volume can beadjusted to levels from 0 (off) to 66 (max-imum).
➮ To increase the volume, turn thevolume control knob 2 to theright.
➮ To decrease the volume, turn thevolume control knob 2 to the left.
Adjusting the power-on volumeIt is possible to adjust the volume atwhich the car audio system switches on.
➮ Press MENU 8.
➮ Press : repeatedly until “ONVOLUME” appears in the display.
➮ Press : to adjust the vol-ume.
If you adjust this setting to “0”, the caraudio system will switch on at the vol-ume used before it was switched off.
Warning of serious injuryIf the power-on volume is set to themaximum level, it may be extremelyloud when the car audio system isswitched on.If the power-on volume is set to 0 andthe car audio system was played atmaximum volume before it wasswitched off, it may be extremely loudwhen the car audio system isswitched back on. This could resultin serious injury to your ears!
➮ Once you have selected the de-sired settings, press MENU 8 orOK ;.
VOLUME CONTROL
MuteYou can reduce the volume of the caraudio system immediately (mute).
➮ Press 3 briefly.
“MUTE” will appear in the display.
Selecting the mute levelIt is possible to select the mute level.
➮ Press MENU 8.
➮ Press : repeatedly until “MUTELEVEL” appears in the display.
➮ Press : to select the mutelevel.
➮ Once you have made your selec-tion, press MENU 8 or OK ;.
Mute during telephoneoperationIf your car audio system has beenequipped with a mobile telephone, it willautomatically switch to mute when youuse the phone. This will not work un-less the mobile phone is connected tothe car audio system as described inthe installation instructions.If a traffic announcement is receivedwhile the phone is in use and traffic in-formation priority has been activated,you will hear the traffic announcement.For more information, refer to the sec-tion on “Traffic information reception”.The car audio system will be muted tothe mute level selected.
31
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
Adjusting the volume of thebeepFor a number of functions you will heara beep if you press a key for longer than2 seconds, e.g. if you want to store aradio station on a station preset. You canadjust the volume level of this beep.
➮ Press MENU 8.
➮ Press : repeatedly until“BEEP” appears in the display.
➮ Press : to adjust the volume.“0” means the beep volume is off,“9” means the beep volume is ad-justed to the maximum volume.
➮ Once you have adjusted the set-tings, press MENU MENU 8 orOK ;.
Radio operationThis car audio system has beenequipped with an RDS radio receiver.Many FM radio stations now transmitthe RDS signal, which contains suchother information as the station nameand the program type (PTY) along withthe regular station programming.As soon as the car radio receiver de-tects the station name, it will appear inthe display. It is also possible to displaythe program type. For more information,refer to the section on “Program Type(PTY)”.
Switching to the radio modeIf you are currently using the CD playeror CD changer,
➮ press CD•C @ repeatedly until“RADIO” appears in the display.
Special RDS functions (AF, REG)The special RDS functions for AF (Al-ternate Frequency) and REG (REGion-al) improve the performance of your carradio.
● AF. If this RDS function is activated,the car radio continuously searchesin the background for the frequencywith the best reception for the sta-tion you have tuned into.
● REG. A number of radio stationsbroadcast different regional pro-gramming at different times of theday. Use REG to prevent your carradio from tuning into alternate fre-quencies which might have differ-ent programming.
VOLUME CONTROL RADIO OPERATION
32
Note:It is necessary to activate/deactivateREG in the menu.
Switching REG on/off
➮ Press MENU 8.
➮ Press : repeatedly until “REG”appears in the display. “OFF” or“ON” will appear next to “REG”.
➮ Press or : to switch REG offor on.
➮ Press MENU 8 or OK ;.
Switching RDS functions on/off
➮ To take advantage of the RDSfunctions for AF and REG, pressRDS 4.
When the RDS functions have beenactivated, “RDS” will light up as a sym-bol in the display. When you activate thefunctions, “REG ON” or “REG OFF” willappear briefly in the display.
Selecting wavebands/memorybanksUsing this car audio system, you cantune into radio stations on the FM, MWand LW (AM) wavebands. There arethree memory banks for the FM wave-band and one memory bank each forMW and LW (the Sylt CD50 does notinclude MW/LW radio).You can store six stations in each ofthese memory banks.
➮ To switch between the different FMmemory banks or wavebands,press BND / TS 5.
Tuning into radio stationsYou can tune into radio stations in anumber of different ways.
Automatic seek tuning
➮ Press or :.
The radio will tune into the next availa-ble station within reception range.
Manual station selectionYou can also tune into radio stationsmanually.
➮ Press or :.
Note:You cannot use manual tuning unlessthe RDS functions are deactivated.
Paging through the broadcastingnetwork (for FM only)If a radio broadcasting network hasmore than one station, you can pagethrough the “station network”.
➮ Press or : to tune into thenext station in the network.
Note:To take advantage of this function, youmust have activated the RDS functions.
It is only possible to tune into those sta-tions which have been received oncebefore already. To do this, use the SCANor TravelStore function.
RADIO OPERATION
33
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
Adjusting seek tuning sensitivityIt is also possible to adjust the sensitiv-ity of the seek tuning function to tunethe radio into stations with strong recep-tion signals only, or to those with weak-er reception signals as well.
➮ Press MENU 8.
➮ Press : repeatedly until“SENS” appears in the display.
➮ Press :.
The currently selected setting will ap-pear in the display. “SENS HI6” indicatesthe highest level of sensitivity, “SENSLO1” the lowest. If you select “SENSLO”, “lo” will light up in the display.
➮ Press : to adjust the desiredsensitivity.
➮ Once you have made your selec-tion, press MENU 8 or OK ;.
Storing radio stations
Storing radio stations manually
➮ Select the desired memory bankFM1, FM2, FMT or either MW orLW (the Sylt CD50 does not in-clude MW/LW radio).
➮ Tune the radio into the desired sta-tion.
➮ Press and hold down one of thestation preset buttons 1 to 6 > onwhich you want to store the radiostation for longer than two seconds.
Storing radio stationsautomatically (TravelStore)You can automatically store the six ra-dio stations with the strongest receptionin your current reception area (for FMonly). These stations will be stored inthe FMT memory bank.
Note:Any stations stored previously in thememory bank will be deleted.
➮ Press and hold down BND / TS 5for longer than two seconds.
The storing process will begin. “TRAV-EL-STORE” will appear in the display.After the stations have been stored, theradio will automatically begin to play thestation stored on preset button 1 for theFMT memory bank.
Recalling stored radio stations➮ Select the desired station memory
bank.
➮ Press the station button 1 to 6 >on which you have stored the de-sired radio station.
Scanning the radio stationswithin reception range (SCAN)You can scan all of the radio stationscurrently within your reception range.The scan time can be set in the menuto play from five to 30 seconds.
Starting SCAN
➮ Press and hold down OK ; forlonger than two seconds.
SCAN will begin. “SCAN” will appearbriefly in the display, followed by the
RADIO OPERATION
34
flashing station name or frequency ofthe radio station currently beingscanned.
Stopping the SCAN function,continuing to listen to the radiostation scanned
➮ Press OK ;.
SCAN will end and the last stationscanned will continue playing.
Adjusting the scan time➮ Press MENU 8.
➮ Press : repeatedly until“SCANTIME” appears in the dis-play.
➮ Press : to set the scan timeas desired.
➮ Once you have made your selec-tion, press MENU 8 or OK ;.
Note:The scan time selected also applies tothe SCAN function for CD player andCD changer operation.
Program Type (PTY)In addition to the radio station name, anumber of FM stations transmit informa-tion on the type of program they broad-cast. This car radio has been equippedto receive and display this information.
These program types can include:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
Using the PTY function, you can selectthe radio station according to the typeof program being broadcast.
As soon as the radio registers a radiostation broadcasting the program typeselected, it will automatically switch fromthe station playing or from the CD play-er or CD changer mode to that station.
Switching PTY on/off
➮ Press MENU 8.
➮ Press : repeatedly until “PTYON” or “PTY OFF” appears in thedisplay.
➮ Press or : to switch thisfunction either on or off.
PTY will light up in the display when thisfunction has been activated.
➮ Press MENU 8 or OK ;.
Selecting the program type andstarting seek tuning
➮ Press or :.
The currently selected program type willappear in the display.
➮ If you would like to select a differentprogram type, press or :while the program type is on dis-play to switch to another programtype.
OR
➮ Press one of the station preset but-tons from 1 to 6 > to select theprogram type stored on that partic-ular station button.
The program type selected will appearbriefly in the display.
RADIO OPERATION
35
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
➮ Press or : to start seek tun-ing.
The next radio station broadcasting theprogram selected will begin to play.
Note:If the radio is not able to find a stationbroadcasting the program type select-ed, you will hear a beep and “NO PTY”will appear briefly in the display. The sta-tion selected previously will then resumeplay.
Storing the program types on thestation preset buttons
➮ Press or : to select the pro-gram type.
➮ Press the desired station presetbutton (1 to 6) > for longer thantwo seconds.
The program type selected will then bestored on the station preset button (1 to6) > pressed.
Optimising radio reception
Interference-related treble cut(HICUT)The HICUT function improves receptionwhen reception begins to deteriorate. Ifinterference occurs, then the treble andthe noise is cut automatically.
Switching HICUT on/off
➮ Press MENU 8.
➮ Press : repeatedly until “HI-CUT” appears in the display.
➮ Press or : to switch HICUTon or off.
“HICUT 0” indicates that the function isswitched off; when “HICUT 1” appears,the treble will be cut.
➮ Press MENU 8 or OK ;.
Selecting the display of variabletextA number of radio stations use the RDSsignal to transmit advertising or othertexts in place of their station names.These “variable texts” will appear in thedisplay. It is possible to adjust your ra-dio so that these “variable texts” do notappear.
➮ Press and hold down RDS 4 until“NAME FIX” appears in the display.
➮ To have the “variable texts” dis-played again, press and hold downRDS 4 until “NAME VAR” appearsin the display.
RADIO OPERATION
36
Traffic informationreception
Switching traffic informationpriority on/off➮ Press TRAF ?.
Traffic information priority is activatedwhen the traffic congestion symbol lightsup in the display.
Note:You will hear a warning beep
● if you leave the reception area ofthe traffic information station youare tuned into.
● if you are listening to a CD, leavethe reception area of the traffic in-formation station you are tuned intoand the seek tuning function is un-able to find another traffic informa-tion station.
● if you switch from a traffic informa-tion station to a station which doesnot broadcast traffic information.
Then either switch off traffic informationpriority or switch to a different traffic in-formation station.
Adjusting the volume for trafficannouncements➮ Press MENU 8.
➮ Press : repeatedly until “TAVOLUME” appears in the display.
➮ Press : to adjust the trafficannouncement volume.
➮ Once you have adjusted the set-ting, press MENU 8 or OK ;.
TRAFFIC INFORMATION RECEPTION
37
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
CD player operationThe CD player in this car audio systemcan be used to play conventional musicCDs with a diameter of 12 cm.
Danger of damage to the CDplayer!CD singles with a diameter of 8 cmand contour CDs (shape CDs) arenot suitable for use with this CD play-er.We assume no liability for any dam-age done to the CD player resultingfrom the use of unsuitable CDs.
Starting CD player operation● If there is no CD in the player,
➮ press 9.
The flip release panel will open.
➮ Insert a CD into the player with thelabel facing up until you feel resist-ance. Do not use force.
The CD will be pulled into the playerautomatically.Do not attempt to assist or prevent thisprocess.
➮ Press the operating panel closedgently until you feel it click intoplace.
CD playback will begin.
● If there already is a CD insertedinto the player,
➮ press CD•C @ repeatedly until“CD” appears in the display.
Playback will resume at the point whereit was interrupted.
Selecting tracks➮ Press a key on the cursor block :
to select the next or the previoustrack.
Press or : once to restart thesame track.
Audible fast forward/reverse(CUE/REVIEW)To start Cue or Review,
➮ press and hold down either or : until the process begins.
Playing tracks in random order(MIX)➮ Press 5 MIX >.
“MIX CD” will appear briefly in the dis-play, the MIX symbol will light up in thedisplay. The next track played will beselected at random.
Stopping the MIX function
➮ Press 5 MIX > again.
“MIX OFF” will appear briefly in the dis-play and the MIX symbol will no longerlight up.
Scanning tracks (SCAN)You can scan all of the tracks on theCD.
➮ Press OK ; for longer than twoseconds. Scanning will begin withthe next track.
Note:It is possible to adjust the scan time. Formore information, read the section on“Adjusting the scan time” in the chapteron “Radio Operation”.
CD PLAYER OPERATION
38
Stopping the SCAN function,continue listening to the currenttrack
➮ To stop the SCAN function, pressOK ;.
The track currently scanned will contin-ue playing.
Repeating individual tracks(REPEAT)➮ To repeat the track currently play-
ing, press 4 RPT >.
“REPEAT TRCK” will appear briefly inthe display, the RPT symbol will light upin the display. The track will continue torepeat until RPT is deactivated.
Stopping the REPEAT function
➮ If you want to stop the REPEATfunction, press 4 RPT > again.
“REPEAT OFF” will appear briefly in thedisplay and the RPT symbol will no long-er light up. CD playback will resumenormally.
Interrupting playback (PAUSE)➮ Press 3 >.
“PAUSE” will appear in the display.
Stopping PAUSE
➮ Press 3 > during the pause.
Playback will resume.
Switching the display mode➮ To switch the display between the
track number and time or the tracknumber and elapsed playing time,press / DIS 7 for longer thantwo seconds once or repeatedly asrequired.
Traffic radio information duringCD playback➮ If you would like to receive traffic
radio information while listening toyour CD player, press TRAF ?.
The traffic congestion symbol will lightup in the display to indicate that priorityfor traffic radio announcements hasbeen activated. For more information,please refer to the section on “Trafficinformation reception”.
CD PLAYER OPERATION
39
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
CD changer operation
Note:For information on how to handle CDs,how to insert CDs into the changer andhow to operate the changer, please re-fer to the instructions included with theCD changer.
Starting CD changer operation➮ Press CD•C @ repeatedly until
“CHANGER” appears in the dis-play.
Playback will begin with the first CD thechanger detects in the magazine.
Selecting CDs➮ To select a CD up or down in the
magazine, press or : the re-quired number of times.
Selecting tracks➮ To select a different track on the
CD currently playing, press or : the required number of times.
Audible fast forward/reverse(CUE/REVIEW)To start Cue or Review,
➮ press and hold down either or : until the process begins.
Switching the display mode➮ To switch the display between the
track number and time or the tracknumber and elapsed playing time,press / DIS 7 for longer thantwo seconds once or repeatedly asrequired.
Repeating individual tracks orentire CDs (REPEAT)➮ To repeat the track currently play-
ing, press 4 RPT > briefly.
“REPEAT TRCK” will appear briefly inthe display, RPT will light up in the dis-play.
➮ To repeat the entire CD currentlyplaying, press 4 RPT > again.
“REPEAT DISC” will appear briefly in thedisplay, RPT will light up in the display.
Stopping the REPEAT function
➮ To stop the REPEAT function forthe current track or CD, press 4RPT > repeatedly until “REPEATOFF” appears in the display andRPT no longer lights up.
Playing tracks in random order(MIX)➮ To play the tracks of the currently
selected CD in random order,press 5 MIX > briefly.
“MIX CD” will appear briefly in the dis-play, MIX will light up in the display.
➮ To play the tracks of all of the CDsin random order, press 5 MIX >again.
“MIX ALL” will appear briefly in the dis-play, MIX will light up in the display.
Note:The CDC A 08 and the IDC A 09 arealso able to play all of the CDs in thechanger in random order. The other CDchangers first play all of the tracks on aCD in random order and then select thenext CD in the changer.
CD CHANGER OPERATION
40
Stopping the MIX function
➮ To stop the MIX function, press 5MIX > repeatedly until “MIX OFF”appears briefly in the display andMIX no longer lights up.
Scanning all of the tracks on allof the CDs (SCAN)➮ To scan all of the tracks on all of
the CDs in ascending order, pressOK ; for longer than two sec-onds.
“SCAN” will appear in the display.
Stopping the SCAN function
➮ To stop the SCAN function, pressOK ; briefly.
The track currently scanned will contin-ue playing.
Note:It is possible to adjust the scan time. Formore information, read the section on“Adjusting the scan time” in the chapteron “Radio Operation”.
Interrupting playback (PAUSE)➮ Press 3 >.
“PAUSE” will appear in the display.
Stopping PAUSE
➮ Press 3 > during the pause.
Playback will resume.
CLOCK
Displaying the clock brieflyIn the radio mode
➮ To display the time briefly, press / DIS 7 briefly.
In CD player and CD changer mode
➮ To switch between the display ofthe CD number, playing time andthe time, press / DIS 7 once orrepeatedly.
Altering the permanent display➮ To make the time or another dis-
play as described above perma-nent, press and hold / DIS 7until the desired information ap-pears in the display.
Setting the time➮ To set the time, press MENU 8.
“MENU” will appear in the display.
➮ Press : until “CLOCKSET” ap-pears in the display.
➮ Press :.
The time will appear in the display. Theminutes will flash and can be altered.
➮ Press or : to alter the min-utes.
➮ Once you have altered the minutes,press :. The hours will begin toflash.
➮ Press or : to alter the hours.
➮ Once you have set the time, pressMENU 8 or OK ; twice.
CLOCKCD CHANGER OPERATION
41
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
Selecting the 12/24-hour timedisplay mode➮ Press MENU 8.
“MENU” will appear in the display.
➮ Press : repeatedly until “24 HMODE” or “12 H MODE” appearsin the display.
➮ Press or : to switch the dis-play mode.
➮ Once you have selected the mode,press MENU 8 or OK ;.
Activating the clock for displaywhen the car audio system isswitched off➮ To activate the clock for display
when the car audio system isswitched off, press MENU 8.
“MENU” will appear in the display.
➮ Press : repeatedly until “CLKDISP OFF” or “CLK DISP ON” ap-pears in the display.
➮ Press or : to switch theclock display on or off.
➮ Once you have made the setting,press MENU 8 or OK ;.
CLOCK
Displaying the time briefly whenthe car radio is switched offTo display the time briefly when the carradio is switched off,
➮ press / DIS 7.
The time will then appear in the displayfor eight seconds.
42
Adjusting the tone andbalance/fader
Adjusting the bass➮ To adjust the bass, press AUD / LD
=.
“BASS” will appear in the display.
➮ Press or : to alter the bass.
Adjusting the treble➮ To adjust the treble, press AUD /
LD =.
“BASS” will appear in the display.
➮ Press : until “TREBLE” ap-pears in the display.
➮ Press or : to alter the treble.
Adjusting the balance➮ To adjust the balance, press AUD /
LD =.
“BASS” will appear in the display.
➮ Press : until “BALANCE” ap-pears in the display.
➮ Press or : to alter the bal-ance.
Adjusting the fader➮ To adjust the fader, press AUD / LD
=.
“BASS” will appear in the display.
➮ Press : until “FADER” appearsin the display.
➮ Press or : to alter the fader.
Switching Loudness on/offLoudness boosts the bass and treblewhen the volume is low to create a morenatural sound.
➮ Press AUD / LD = for approx. twoseconds.
LD will light up in the display to indicatethat Loudness is active.
Adjusting Loudness intensityThe Loudness boost can be set instages from one to six.
➮ Press MENU 8.
“MENU” will appear in the display.
➮ Press : repeatedly until“LOUDNESS” appears in the dis-play.
➮ Press or : to alter the Loud-ness setting.
➮ Once you have completed adjust-ing the settings, press MENU 8 orOK ;.
TONE AND BALANCE/FADER
43
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
EqualizerThis car audio system is equipped witha parametric 2-band equalizer. For“LOW EQ” the gain can be set to a fre-quency between 60 to 100 Hz. For“HIGH EQ” the gain can be set to a fre-quency between 10000 and 17500 Hz.As a result, it is possible to significantlyinfluence the in-vehicle acoustics.
Notes on making the settingsWe recommend that you use a CD youare familiar with to make the settings.
Before you set the equaliser, set bass,treble, balance and fader to “0” and de-activate the Loudness function. Formore information on how to do this, re-fer to the section on “Tone and balance/fader”.
➮ Now listen to the CD you have se-lected.
➮ Evaluate the sound according toyour own personal preferences.
➮ Now refer to “Sound impression” inthe table.
➮ Make the settings for the equalizeras described under “What to do”.
Adjusting the equalizer➮ Press EQ <.
“LOW EQ” will appear in the display.
➮ Press or : to select either“LOW EQ” or “HIGH EQ”.
➮ Press or : to adjust thegain.
➮ Press or : to select the fre-quency range.
➮ To select the next frequency, pressOK ; first and then :.
➮ Once you have completed makingall of the necessary adjustments,press EQ <.
EQUALIZER
44
EQUALIZER
Adjusting the spectrometerThe spectrometer in the display usessymbols to temporarily indicate whatadjustments are made to the volume,the tone and balance/fader and theequalizer settings.
If no adjustments are being made to thesystem, the spectrometer displays theoutput level of the car radio.You can select the type of spectrome-ter you want displayed in the menu.There are two different types available.
Selecting the spectrometer type
➮ Press MENU 8.
“MENU” will appear in the display.
➮ Press : repeatedly until “EQDISPLAY” appears in the display.
➮ Press or : to select either“SPECTRUM 1”, “SPECTRUM 2”or “EQ DISP OFF”.
➮ Once you have completed adjust-ing the settings, press MENU 8 orOK ;.
Assistance in setting your equaliserStart to make your settings in the treble and end it with the bass range.
Frequency range
Bass60 to 100 Hz
Treble10000 to17500 Hz
Soundimpression/problem
Bass reproductiontoo weak
Lifeless reproduc-tion.Lack of transparen-cy.Instruments do notsparkle.
What to do
Boost the basswith “LOW EQ”.Frequency: 60 to100 Hz.Gain: +4 to +6 dB.
Boost treblerange with“HIGH EQ”.Frequency: 10000to 17500 Hz.Gain: +2 to +4 dB.
Notes
Avoid distortion.Adjust the gaincarefully.
Avoid a piercingtype of tone.Strong hissingsound unpleas-ant.
45
EN
GL
ISH
DE
UT
SC
HF
RA
NÇ
AIS
ITA
LIA
NO
NE
DE
RLA
ND
SS
VE
NS
KA
ES
PAÑ
OL
PO
RTU
GU
ÊS
SPECIFICATIONSEXTERNAL AUDIO SOURCES
External audio sourcesIn place of the CD changer it is alsopossible to connect other external au-dio sources to the line output. Thesesources can include a portable CD play-er, MiniDisc player or MP3 player.You must activate the AUX output in themenu.If you would like to connect another ex-ternal audio source, you will require anadapter cable. This adapter cable canbe ordered from any authorized Blau-punkt dealer.
Switching the AUX output on/off➮ Press MENU 8.
“MENU” will appear in the display.
➮ Press : repeatedly until “AUX-IN-1 OFF” or “AUX-IN-1 ON” ap-pears in the display.
➮ Press or : to switch AUX onor off.
➮ Once you have completed your se-lections, press MENU 8 or OK;.
Note:If the AUX input has been switched ON,you can select it by pressing CD•C @.
Specifications
AmplifierOutput power: 4 x 25 watts sinus
acc. to DIN 45 324at 14.4 V4 x 40 watts max.power
TunerWavebands:FM : 87.5 – 108 MHzMW : 531 – 1602 kHzLW : 153 – 279 kHz
(The Sylt CD50 does not include MW/LW.)
FM frequency response:
30 - 15000 Hz
CDFrequency response:
20 - 20000 Hz
Preamp Out4 channels: 2 V
Subject to technical modification!
Service-Nummern / Service numbers / Numéros du service après-vente / Numeri del servizio di assistenza / Servicenummers /Telefonnummer för service / Números de servicio / Número deserviço
Tel.: Fax:
Deutschland 0 18 05 00 02 25 0 51 21 49 40 02Belgique / België 0 25 25 54 44 0 25 25 54 48France 014 010 70 07 014 010 73 20Nederland 023 565 63 48 023 565 63 31Great Britain 018 958 383 66 018 958 383 94Danmark 44 89 83 60 44 89 86 44Sverige 08 750 15 00 08 750 18 10Norge 66 81 70 00 66 81 71 57Suomi 094 359 91 094 359 92 36Österreich 01-6 10 39-0 01-6 10 39-391EÏÏ¿˜ 015 762 241 015 769 473âeská republika 026 130 04 41 026 130 05 14USA 800-266 25 28 708-681 71 88Singapore 006 535 054 47 006 535 053 12Slovensko 042 175 873 212 042 175 873 229
02/00 TRO K7/VKD 8 622 402 138
Blaupunkt-Werke GmbHBosch Gruppe
