Upload
aneeta-hari
View
227
Download
0
Embed Size (px)
Citation preview
8/3/2019 Damp Proof Membranes and Ancillaries
1/5
Protecting what mattersNewton Damp Proofng Membranes
SYSTEM 800- DAMP PROOFING
Newto
nSystem8
00
Damp
Proong
ci/sfb
(21.9
)
ln6
(l34)
8/3/2019 Damp Proof Membranes and Ancillaries
2/5
2 3
Newton System 800Damp proofng
Quick, clean and proven to work, Newton damp proo
membranes oer permanent and cost eective damp
proofng solutions.
Company timeline
1932
Designed and produced the frst physical damp
proo membrane Newtonite or internal and
external damp proo applications throughout
the uk
19401945
Business put on hold during the World War II
19451983
Newtons damp proo membrane business
ourished as uk housing stock was upgraded
to habitable accommodation with Newtonite.
During this period over 5 million metres o
Newton membrane sold
1984
Current Chairman Christopher Newton invented
Newlath hdpe dimpled sheet membrane with
heat welded nylon mesh
19862009
Newton develop Newton System 500 ull
basement waterproofng system. For above
ground damp, Newlath continues to be the
industry leading damp proo membrane with
over 2 million metres installed in theuk
1848 established in London
Specialist supplier o plasterers hair and
ancillary products or the construction industry
Today
Newtons product range continues to grow to
encompass products to deal with all aspects
o commercial and domestic structural
waterproofng, damp proofng and packaged
sump and pump stations
John Newton
circa 1848
Newtonite
brochure 1970s
Damp proofng systemDamp proofng overview
Newton System 800 is a range o
bba approved damp proo membranes
and ancillaries which are quick and
clean to install and oer a permanent
solution or damp proofng walls.
Newton 805 Newlath and Newton
803 Newtonite meshed membranes
provide a frm key and impermeable
barrier on any damp or deteriorating
surace ready or plaster, render or
dot and dab plasterboard. The un-
meshed Newton 803 is used where
nsulation requirements dictate the
use o a timber or steel rame ready
or plasterboard. Newton damp proo
membranes are the ideal solution or
isted buildings as they are deemed
reversible.
Why Newtons?
Ideal or listed buildings as Newton
damp proo membranes are reversible
Permanently treats walls aected by
penetrating and rising damp
Over 2 million metres o Newton 805
Newlath have been used nationally
Used in buildings such as Windsor
Castle, London Underground stations,
Houses o Parliament, Royal Courts o
Justice and St Georges Hall Liverpool
30 year product warranty
Insurance backed guarantees available
when installed by our nationwide
Newton registered installers
Ideal or damp proofng all existing
building abrics and new build
timber ramed housing
bba certifed
Newton damp proo
membranes have
a pattern o raised
studs which create
air channels to
enable the damp
wall to dry out
system 800
Newton damp proo membranes are
ideal or accommodating a number o
fnishes, as illustrated in the ollowing
drawings:
1 Newton 803
with battens
2 Newton 803
with metal rame
3 Newton 805 Newlath/803 Newtonite
with dot and dab
4 Newton 805 Newlath/803 Newtonite
with plaster/lime plaster/render
As a homeowner I would strongly recommend that anyone thinking
o waterproofng or damp proofng their property look no urther than
Newtons their products are excellent and this is coupled with frst
class service g palazzo, london
Damp Proo Membranes and AncillariesThe proven solution to damp problems
John Newton company history
newton-membranes.co.uk
Newton damp proo membranes installed to
the walls o St Georges Hall, Liverpool, to ft
the contours o the structure. The damp proo
membrane acts as a permanent barrier and
allows the damp walls to dry out
1 2
3 4
8/3/2019 Damp Proof Membranes and Ancillaries
3/5
4 5
case studywindsor castle
Data fle
Overview
Sector Heritage reurbishment
Client The Crown Estate
Products used
Newton 803 Newtonite membrane
Newton 805 Newlath membrane
Newton 800 Mesh Plug Newton Mesh Tape
Key project actors
Listed historic building
Reversible product
Conorms to conservation
requirements
Windsor CastleTreating rising and penetrating damp
Project description
Windsor Castle is the largest and
oldest occupied castle in the world,
and the original castle was built in
around 1080. Recently, Windsor Castle
had many problems with rising and
penetrating damp. Newton 805 Newlath
and Newton 803 Newtonite were used
as they provided the ideal solution to
the problem as Newton damp proo
membranes are deemed reversible
so can be used in Historic and Listed
buildings where there are strict
regulations.
With a building this size and this old,
there was no question o damp proo
provision being incorporated into the
original building, so the dampness had
become severe. Newtonite was used or
remedial work at Windsor Castle in the
1950s and Newlath has been used in
many parts o the lower regions o the
castle over recent years.
Newton damp proo membranes can be sympathetically applied with
little or no preparation to the wall surace required, thus maintaining
the structural and aesthetic integrity o the building. This makes them
the ideal solution or historic and listed buildings.
For technical inormation and productdata sheets please visit our website:
www.newton-membranes.co.uk
Sutherland GroveTreating aggressive penetrating damp
Data fle
Overview
Sector Residential reurbishment
Client Berkeley Homes
Products used
Newton 805 Newlath membrane
Newton 800 Mesh Plug
Newton Mesh Tape Newton Mastic
Key project actors
Luxury apartment development
Penetrating damp made building
uninhabitable
Newton 805 Newlath orms a
permanent damp proofng barrier
Quick application
Protection rom urther moisture
penetration
Project description
Newton 805 Newlath was the
recommended solution or treating
penetration damp in this property. The
project entailed renovating an existing
Grade II Listed three-storey school
building into luxury apartments. The
single skin brick building had been
derelict with deective pointing and as
a consequence had lateral penetration
o moisture across all elevations
rendering it uninhabitable. The building
suered rom penetrating damp to
the external brickwork on three levels.
As a Listed Building, the aade could
not be touched and a sympathetic
and reversible solution needed to be
implemented. Newton 805 Newlath was
specifed as the most eective method
o damp proofng, and it was quick to
apply, making it the ideal permanent
damp proofng solution.
Newton damp proofng products are ideal or new-build and
reurbishment projects. Newtons technical team can help with all
aspects o damp proofng and waterproofng. Call 020 7237 1217
to be put through to one o our experts.
case studysutherland grove
For technical inormation and productdata sheets please visit our website:
www.newton-membranes.co.uk
8/3/2019 Damp Proof Membranes and Ancillaries
4/5
6 7
System 100 Cementitious Products
Newton System 100 is a comprehensive portolio
o cementitious products which have been
introduced into our structural waterproofng
range to complement and complete our
basement waterproofng designs in areas where
the Newton System 500 would not be suitable.
Such details include lit shats, at softs and
externally to retained slabs and ring beams.
System 200 Deck and Roofng
A complete range o externally applied
elastomeric high perormance liquid membranesand ancillaries or balconies, terraces, at and
inverted roos, podium decks, car parks and
reservoirs. This new portolio o seamless and
robust liquid membranes gives specifers and
specialist waterproofng contractors a quick and
cost eective solution to protect external areas
rom water ingress.
System 300 Horizontal Drainage
Newtons range ohdpp and hdpe horizontal
drainage membranes provide comprehensive
protection o primary waterproofng layers such
as Newton 201 RubberFlex. In addition they can
act as a fltration layer and also provide reservoir
capabilities or specifers who are designing
green or tur roo projects.
System 400 Vertical Drainage
Newton System 400 comprises a range o
composite membranes that include a dimpled
core ohdpp orhdpe together with a flter
abric that is attached to the core during the
manuacturing process. When placed to the
retaining wall these membranes protect the
primary waterproofng membrane rom impact
and water pressure, diverting water down to a
perorated land drain or removal.
System 500 Cavity Drain Waterproofng
The proessionals waterproofng system o
choice, Newton System 500 is an internally
applied waterproofng system based upon our
range o cavity drain membranes, drainage
conduits and sophisticated pumping and control
systems. Unlike conventional tanking, Newton
System 500 is not attempting the almost
impossible and trying to hold water back, but
places designed maintainable depressurisation
voids at known weaknesses in the structure so
that ingressing water is simply captured and
diverted out o the property.
System 600 Flooring Membranes
Newton System 600 is a range ohdpe and
hdpp ooring membranes oering a complete
damp proo solution or both commercial and
domestic ooring applications. As well as
providing protection rom dampness within
the oor, our membranes de-couple the oor
fnish rom the substrate preventing damage due
to substrate movement and cracking. Newton
damp proo membranes can be installed over
existing and green concrete. In addition our
ooring membranes are a popular solution or
dealing with inherent hydrocarbons or ground
gas problems. Newton ooring membranes can
accommodate a variety o fnishes including
timber oors, screeds and direct tiles.
System 700 Liquid Applied Floor Coatings
System 700 is a range o liquid applied
protective and decorative internal ooring
products. These products are ast curing and
available in a variety o colours, and are typically
used or the reurbishment and protection o
commercial and domestic oors.
System 800 Damp Proofng
Newton System 800 is a range obba approved
damp proo membranes and ancillaries
which are quick and clean to install oering a
permanent solution or damp proofng walls.
The meshed membranes provide a frm key and
impermeable barrier on damp or deteriorating
surace ready or plaster, render or dot & dab
plasterboard. The un-meshed Newton 803 is
used where insulation requirements dictate
the use o a timber or steel rame ready or
plasterboard.
System 900 Liquid Primers and Sealers
Newtons high perormance range o liquid
applied products are used in conjunction with
System 200 and 700 liquid membranes. They
act as priming agents or a variety o substrates
prior to the application o our specialist
waterproofng and ooring membranes.
Sump and pump
Newtons have an extensive range o submersible
pumps and pumping ancillaries. We supply the
highest quality pumps available in each class,
or the control o clean ground water, grey water,
euent or sewage. Newtons can also provide a
wide range o specialist submersible pumps and
sump chambers which can be tailor made or
site-specifc conditions.
Newton Waterproofng SystemsComplete damp proofng and waterproofng solutions
fixtures and fittings
Fixtures and FittingsTotal protection in fve easy steps
Fitting o System 800 Damp Proo Membranes
newton-membranes.co.uk
National Installer Network
Newton Registered Installers are
trained and monitored by John Newton
& Company so that we have not just
the best damp proofng systems but
the best specialist damp proofng
contractors to diagnose your problem,
design your damp proofng system and
install Newton damp proo membranes
to the very highest standards. In
addition, Newton Registered Installers
provide an insurance backed guarantee.
Please contact us or a list o
Registered Installers in your area.
For urther inormation please contact
John Newton & Company
t 020 7237 1217
w www.newton-membranes.co.uk
Newton System 800 damp proo membranes are quick and easy to install
and can be fnished with a variety o wall coverings. Please reer to the
product data sheets and installation sheets or guidance on fxing the
membranes and the wall fnishes.
1 Cut the membrane to size
3 Neatly old around corners
5 Apply wall fnish
2 Place the membrane to the wall
4 Drill and then fx with the fxing plug
Full range o ancillary products available
8/3/2019 Damp Proof Membranes and Ancillaries
5/5
John Newton & Company
12 Verney Road
London se16 3dh
t 020 7237 1217
w www.newton-membranes.co.uk
John Newton & Company Ltd, May 2011
John Newton & Co Ltd, Est 1848, is the
uks leading independent supplier of
damp proong membranes, structural
waterproong systems, water control
and drainage products.
Newtons offer the best available, bba
certicated solutions for waterproong
and damp proong applications in
new-build and refurbishment projects.
Our range of structural waterproong
systems, including cementitious
products, deck and roong membranes
and liquid applied oor coatings enable
us to offer full waterproong solutions
for a wide variety of projects.
Newton Waterproong Systems control
and remove unwanted water from
leaking tunnels and underpasses,
railway arches, wet basements, ooded
cellars and damp vaults to make warm
habitable areas or areas suitable fordry storage in both commercial and
domestic projects.
WATERPROOFING SYSTEMS