Features• Input voltage: 125 - 400 VDC

• Nominal power: up to 500 W• Nominal current: up to 3.0 A• Input auxiliary voltage: up to 20 V DC• Single or three-shunt resistors for current sensing (with sensing network)• Two options for current sensing: dedicated op-amps or through MCU• Overcurrent hardware protection• IPM temperature monitoring and protection• Hall sensor or encoder input• Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2nd series

of SLLIMM™ IPMs• 32-pin motor control connector for interfacing with ST MCU boards• Universal conception for further evaluation with breadboard and testing pins• Very compact size• RoHS compliant

DescriptionThe STEVAL-IPM05F is a compact motor drive power board based on the SLLIMM™(small low-loss intelligent molded module) 2nd series product, STGIF5CH60TS-L. Itprovides an affordable and easy-to-use solution for driving high power motors for awide range of applications such as white goods, air conditioning, compressors, powerfans, high-end power tools and generally 3-phase inverters for motor drives. The IPMitself consists of short-circuit rugged IGBTs and a wide range of features includingundervoltage lockout, smart shutdown, temperature sensing and NTC, andovercurrent protection.

The main characteristics of this evaluation board are its small size, minimal BOM andhigh efficiency. It consists of an interface circuit (BUS and Vcc connectors), bootstrapcapacitors, snubber capacitor, hardware short-circuit protection, fault event signaland temperature monitoring. In order to increase flexibility, it has been designed towork in single or three-shunt configuration and with double current-sensing optionssuch as using three dedicated on-board op-amps, or op-amps embedded in theMCU. The Hall/Encoder part completes the circuit.

Thanks to these advanced characteristics, the system has been specifically designedto achieve fast and accurate current feedback conditioning, satisfying the typicalrequirements for field-oriented control (FOC).

The STEVAL-IPM05F is compatible with ST’s STM32-based control board, enablingdesigners to build a complete platform for motor control.

Product summary

STEVAL-IPM05Fcompact motor drivepower board

STEVAL-IPM05F

STGIF5CH60TS-LSLLIMM™ 2nd seriesIPM

STGIF5CH60TS-L

500 W motor control power board based on STGIF5CH60TS-L SLLIMM™ 2nd series IPM

STEVAL-IPM05F

Data brief

DB2717 - Rev 5 - September 2019For further information contact your local STMicroelectronics sales office.

www.st.com

1 Schematic diagrams

Figure 1. STEVAL-IPM05F circuit schematic (1 of 6)

STEVAL-IPMnmx decoder

N

M

X

RC6

0

RC2

0

RC1

0

RC10

0

RC7

0

RC3

0

RC8

0

RC4

0

RC5

0

RC9

0

STEVAL-IPM05FSchematic diagrams

DB2717 - Rev 5 page 2/9

Figure 2. STEVAL-IPM05F circuit schematic (2 of 6)

Current_A

Current_B

Current_C

phase_Aphase_Bphase_C

3.3V+5V

EM_STOPPWM-A-HPWM-A-LPWM-B-HPWM-B-LPWM-C-HPWM-C-L

NTC_bypass_relay

PWM_VrefM_phase_A

M_phase_B

Bus_voltage

M_phase_C

TSO

NTC

Current_B_amp

E2

Current_C_amp

E3

Current_A_amp

E1

J3

Motor Output

123

SW2

1

2

3

SW4

1

2

3

SW3

1

2

3

J2

Control Connector

1 23 45 67 89 10

11 1213 1415 161719212325 2627 2829 3031 3233 34

18202224

SW1

1

2

3

STEVAL-IPM05FSchematic diagrams

DB2717 - Rev 5 page 3/9

Figure 3. STEVAL-IPM05F circuit schematic (3 of 6)

InputDC_bus_voltage

3.3V

+Bus

3.3V

1.65V

Bus_voltage

D1BAT48JFILM

+ C447µ/35V

J1

INPUT-dc

12 R2

470K

R3 120R

R1470K

R61k0

-

+

U1D

TSV994

12

1314

411

+ C347µ/35V

R47k5

C210n

+C1

R51k0

STEVAL-IPM05FSchematic diagrams

DB2717 - Rev 5 page 4/9

Figure 4. STEVAL-IPM05F circuit schematic (4 of 6)

3.3V

1.65

V

1.65

V

3.3V

1.65

V

3.3V

E1

Cur

rent

_A_a

mp

E2

Cur

rent

_B_a

mp

E3

Cur

rent

_C_a

mp

R30

1k0

R29

2k1

-+

U1A

TSV9

94

3 21

4 11

TP24

R31

1k

R43

2k1

C30

100p

R37

1k0

C29

330p

R41

1k

C24

100p

C28

10n

C25

330p

TP25

-+

U1B

5 67

4 11

R35

1k0

C23

100n

C22

10n

R34

2k1

R33

2k1

R42

1k0

C31

330pTP

26

R32

1k0

R39

2k1

+

C21

4.7u

50V

C27

100p

-+

U1C

10 98

4 11

R40

1k0

R38

2k1

C26

10n

R36

1k

TSV9

94

TSV9

94

STEVAL-IPM05FSchematic diagrams

DB2717 - Rev 5 page 5/9

Figure 5. STEVAL-IPM05F circuit schematic (5 of 6)

Phas

e A

- inp

ut

Phas

e B

- inp

ut

Phas

e C

- in

put

IPM

mod

ule

1_SH

UNT

1_SH

UNT

3_SHUNT

3_SHUNT

3.3V

+Bus

phas

e_A

phas

e_B

phas

e_C

3.3V

3.3V

SD

TSO

NTC

PWM

-A-L

PWM

-A-H

PWM

-B-L

PWM

-B-H

PWM

-C-L

PWM

-C-H

EM_S

TOP

E3 E2 E1

TP23

C15

10p

R17

3k9

R27

0.1

U2

STG

IF5C

H60

TS-L

NW

18

VBO

OTw

4VB

OO

Tv3

LIN

v11

GN

Da

9

LIN

u10

LIN

w12

GN

Db

16

VCC

L13

SD14

CIN

15

NC

1

VBO

OTu

2

HIN

u5

HIN

v6

HIN

w7

VCC

H8

NV

19

NU

20

W21

V22

U23

P24

T225

T126

TSO

17

TP19

TP3

SW5

R22

3k3

R8

1k0

TP16

TP4

TP14

C11

10p

SW7

D3

BAT4

8JFI

LM

R53

4.7k

R14

1k0

D6

BAT4

8JFI

LM

TP20

R10

12k

TP15

J415V 12

C5 2.2u

R19

1k0

TP2

C17

10p

C20

330p

R26

0.1

SW8

TP9

TP13

TP11

TP10

C9

0,1

uF -

400V

R28

10k

R24

1k0

C14

10p

C8

100n

D2

LED

Red

TP8

TP12

C6

2.2u

R15

1k0

TP5

R18

1k0

D4

BAT4

8JFI

LM

C13

100n

TP7

TP22

R13

3k9

TP18

SW6

D5

BAT4

8JFI

LM

TP21

TP1

+C

124.

7u 5

0V

C18

10p

R9

1k0

C19

1n

TP6

R16

3k3

C7 2.2u

C16

1nF

R21

1k0

TP17

R12

5k6

R23

1k0

R7

3k9

C10

10p

R25

0.1

R20

1k0

R11

3k3

STEVAL-IPM05FSchematic diagrams

DB2717 - Rev 5 page 6/9

Figure 6. STEVAL-IPM05F circuit schematic (6 of 6)

H3/Z

+H2

/B+

H1/A

+

GND

+ 3.

3/5V

Hal

l/Enc

oder

M_p

hase

_A

M_p

hase

_C

M_p

hase

_B

3.3V +5

V

3.3V

+5V

R52

4k7

R49

2k4

J5

Enco

der/H

all

11

22

33

44

55

SW12

SW13

C37

10p

C34

100n

SW10

R50

4k7

SW14

SW9

1

2

3

R44

4k7

R51

4k7

R45

4k7

C33

100n

C35

10p

R47

2k4

R48

2k4

C32

100n

SW16

1

2

3

SW15

R46

4k7

SW11

C36

10p

STEVAL-IPM05FSchematic diagrams

DB2717 - Rev 5 page 7/9

Revision history

Table 1. Document revision history

Date Version Changes

23-Oct-2015 1 Initial release.

26-Oct-2015 2 Updated document title and part numberreferences.

09-Mar-2016 3 Updated Schematic diagram

04-Apr-2018 4 Updated document title, features incover page and Schematic diagrams.

16-Sep-2019 5

Updates Figure 3. STEVAL-IPM05Fcircuit schematic (3 of 6) andFigure 4. STEVAL-IPM05F circuitschematic (4 of 6)

STEVAL-IPM05F

DB2717 - Rev 5 page 8/9

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to STproducts and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. STproducts are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design ofPurchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or servicenames are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

© 2019 STMicroelectronics – All rights reserved

STEVAL-IPM05F

DB2717 - Rev 5 page 9/9