Data Sheet: 3mm Plaster Stop Bead. - Domochemica · 2016-02-15 · Data Sheet: 3mm Plaster Stop Bead. Used to provide clean, neat edges at openings or abutments on to other wall surfaces

Data Sheet: 3mm Plaster Stop Bead.

Used to provide clean, neat edges at openings or abutments on to other wall surfaces or ceiling

finishes. They protect and finish skimmed thin coat plaster edges on door and window openings.

Available in galvanised steel grade DX.51. Z275g to BS EN 10346:2009 for internal use in 2.4m / 2.7m

and 3.0m lengths.

Thickness of steel: 0.4mm

Wing width: 29mm

Depth of return: 3mm

Qty per box: 50 lengths

Manufactured in accordance with BS EN 14353:2007+A1:2010 for internal use with gypsum

plasterboards.

Product CE Marked with declaration of performance certificate ‘006CPR2013LOC’ for galvanised

steel.

COSHH & Health & Safety.

Contains no substances hazardous to health.

The comparative rough surface finish and sharp edges of expanded metal requires care when handling

manually, to avoid risk of cuts and abrasions gloves should be worn.

Data Sheet: Angle Bead.

Used to provide clean, true and straight edges on the corners of plaster or render applications to reinforce the

location at its most vulnerable area.

Available in galvanised steel grade DX.51. Z275g to BS EN 10346:2009 for internal use in 2.4m / 2.7m and 3.0m

lengths.

Available in stainless steel grade 1.4301(304) to EN10088-2:2005 for external use in 3.0m lengths only.


Wing width: 43mm / 48mm / 63mm for galvanised and 50mm / 63mm for stainless steel.

Depth of nose: 5mm


Plaster/render thickness: 43mm/48mm suitable for 10-13mm thickness. 50mm/63mm suitable for 16-20mm

thickness.

Manufactured in accordance with BS EN 13658-2:2005 for external use and BS EN 13658-1:2005 for internal

use.

Product CE Marked with declaration of performance certificates ‘0015CPR2013LOC’ for galvanised and

‘0016CPR2013LOC’ for stainless steel.





Data Sheet: Coil Mesh / Brick Reinforcement.

Used regularly as an anti crack mesh within brick and block masonry and when embedded in the mortar joints

assists in forming a stronger masonry bond.

Available in galvanised steel grade DX.51. Z275g to BS EN 10346:2009 for internal use.

Available in stainless steel grade 1.4301(304) to EN10088-2:2005 for external use.

Thickness of steel: 0.4mm.

Coil sizes: Galv – 65mm / 100mm / 175mm/ 225mm / 305mm

Stainless – 65mm / 100mm / 175mm / 225mm

Weight kg/m2: Galvanised 0.9kg/m2 / Stainless 1.11kg/m2

Length of Coils: 20m





Data Sheet: Edge Bead.

Used to protect and encase the edges of plasterboard to assist in reinforcement before boards are skimmed.

Available in galvanised steel grade DX.51. Z275g to BS EN 10346:2009 for internal use in 3.0m lengths only.

Available in 3 different encasement sizes – 9.5mm / 12.5mm and 15mm.


Perforated wing width: 25mm

Return (solid) wing width: 11mm (9.5mm) / 9mm (12.5mm) / 7mm (15mm).

Depth of nose: 2mm


Manufactured in accordance with BS EN 14353:2007+A1:2010 for internal use with gypsum plasterboards.

Product CE Marked with declaration of performance certificate ‘007CPR2013LOC’ for galvanised steel.





Data Sheet: Expanded Metal Lath sheet.

Used as a plaster and render background to aid in keying the substrates together. Traditionally used for

ceilings and walls and assists as an anti-crack mesh.



Thickness of steel: 0.4mm.

Sheet size: Galvanised 2440x685mm / Stainless 2500x700mm

Weight kg/m2: Galvanised 0.9kg/m2 / Stainless 1.11kg/m2

Qty per bundle: 10 sheets

Qty per pallet: 500 sheets


use.







Data Sheet: External Renderstop Bead (Bellcast).

Used to form and protect the lower edge of external render above windows, doors and at DPC level.

It is designed to allow a gentle gradient meaning that rainfall runs away and clear from the

underlying substrate.


and 3.0m lengths.

Available in stainless steel grade 1.4301(304) to EN10088-2:2005 for external use in 3.0m lengths

only.


Wing width: 52mm

Depth of render / plaster: 16-20mm


Manufactured in accordance with BS EN 13658-1:2005 for internal use and BS EN 13658-2:2005 for

external use.

Product CE Marked with declaration of performance certificates ‘0014CPR2013LOC’ for galvanised

steel and ‘0011CPR2013LOC’ for stainless steel.





Data Sheet: Mini Mesh Bead.

Used to provide clean, true and straight edges on the corners of plaster / drylined plasterboard to

reinforce the location at its most vulnerable area.


and 3.0m lengths.


Wing width: 27mm

Depth of nose: 3mm



plasterboards.


steel.





Data Sheet: Movement Bead.

Is used where minor movement is expected in the underlying substrate beneath the plaster / render surface. Is

also used to act as a barrier to separate and distinguish between different changes in render or render colour.

Available in galvanised steel grade DX.51. Z275g to BS EN 10346:2009 for internal use in 3.0m lengths only.

Available in stainless steel grade 1.4301(304) to EN10088-2:2005 for external use in 3.0m lengths only.


Total wing width: 56mm/8mm/56mm

Depth of stop: 10mm / 13mm / 16mm or 19mm

PVC Extrusion expansion: +3mm/-1mm



use.







Data Sheet: Plaster stop Bead.

Used to provide clean, neat edges at openings or abutments on to other wall surfaces or ceiling

finishes. They protect and finish plaster and render edges on door and window openings.


and 3.0m lengths.

Available in stainless steel grade 1.4301(304) to EN10088-2:2005 for external use in 3.0m lengths

only.


Wing width: 56mm

Depth of stop: 10mm / 13mm / 16mm or 19mm


Manufactured in accordance with BS EN 13658-2:2005 for external use and BS EN 13658-1:2005 for

internal use.

Product CE Marked with declaration of performance certificates ‘0012CPR2013LOC’ for galvanised

and ‘0013CPR2013LOC’ for stainless steel.





Data Sheet: Riblath sheet.

Used as a plaster and render background to aid in keying the substrates together. Traditionally used for

ceilings and walls where the back ground is not stable or extra support is required.



Thickness of steel: 0.4mm. 0.5mm for Redrib

Sheet size: 2500mm x 600mm

Weight kg/m2: Galvanised 1.66kg/m2 / Stainless 1.58kg/m2 / RedRib 1.93kg/m2

Rib Depth: 8mm

Qty per bundle: 10 sheets

Qty per pallet: 500 sheets


use.







Data Sheet: Perforated Thin Coat Angle Bead.

Used to provide clean, true and straight edges on the corners of skimmed plasterboard and

traditional skimmed thin coat plaster to reinforce the location at its most vulnerable area.


and 3.0m lengths.


Wing width: 22mm (standard), 24mm (Premier)

Depth of nose: 2mm



plasterboards.


steel.





Documents

Data Sheet: 3mm Plaster Stop Bead. - Domochemica · 2016-02-15 · Data Sheet: 3mm Plaster Stop Bead. Used to provide clean, neat edges at openings or abutments on to other wall surfaces