Data Sheet - Bradford Solar · 13 Data Sheet Data Sheet E-mail: [email protected] IEC-STP-Vem-NO1.01-Rev 2014 Current-Voltage & Power-Voltage Curve (265-20) Excellent performance

12

Data Sheet

265 WattPOLYCRYSTALLINE SOLAR MODULE

Features

www.suntech-power.com IEC-STP-Wem-NO1.01-Rev 2016©Copyright 2016 Suntech Power

16.3%

3800Pa5400Pa

Extended wind and snow load testsModule certified to withstand extreme wind (3800 Pascal) and snow loads (5400 Pascal) *

High module conversion efficiencyModule efficiency up to 16.3% achieved through advanced cell technology and manufacturing capabilities

2%

Suntech current sorting processSystem output maximized by reducing mismatch losses up to 2% with modules sorted & packaged by amperage

PIDResistant

High PID resistant Advanced cell technology and qualified materials lead to high resistance to PID

STP265 - 20/WemSTP260 - 20/WemSTP255 - 20/Wem

Withstanding harsh environmentReliable quality leads to a better sustainability even in harsh environment like desert, farm and coastline

0/+5W

Positive tolerancePositive tolerance of up to 5W delivers higher output reliablity

**

Certifications and standards: IEC 61215, IEC 61730, conformity to CE

IP68 Rated Junction Box

The Suntech IP68 rated junction box ensures an outstanding waterproof level, supports installations in all orientations and reduces stress on the cables. High reliable performance, low resistance connectors ensure maximum output for the highest energy production.

Industry-leading Warranty based on nominal power

The unique cell design leads tremendous reduction in electrodes resistance and raise in conversion efficiency. Less residual stress, less cell micro-cracks and hotspot risks.

•97.5% in the first year, thereafter, foryears two (2) through twenty-five (25), 0.7% maximum decrease from MODULE’s nominal power output per year, ending with the 80.7% in the 25th year after the defined WARRANTY STARTING DATE.****

•12-year product warranty•25-year linear performance

warranty

Industry leading linear warranty

War

rant

ed P

ower

Out

put

1 10 25

100%

10

97.5%

80%25

90%

80.7%

•World-class manufacturer of crystalline silicon photovoltaic modules•Unrivaled manufacturing capacity and world-class technology•Rigorous quality control meeting the highest international standards:

ISO 9001: 2008, ISO 14001: 2004 and ISO17025: 2005•Regular independently checked production process from international

accredited institute/company•Tested for harsh environments (salt mist, ammonia corrosion and sand

blowing testing: IEC 61701, IEC 62716, DIN EN 60068-2-68)***•Long-term reliability tests•2 x 100% EL inspection ensuring defect-free modules

Trust Suntech to Deliver Reliable Performance Over Time Special 4 busbar design

* Please refer to Suntech Standard Module Installation Manual for details. **PV Cycle only for EU market.*** Please refer to Suntech Product Near-coast Installation Manual for details. **** Please refer to Suntech Product Warranty for details.

INSTALLED

13

Data Sheet Data Sheet

IEC-STP-Vem-NO1.01-Rev 2014E-mail: [email protected]

Current-Voltage & Power-Voltage Curve (265-20)

Excellent performance under weak light conditions: at an irradiation intensity of 200 W/m2 (AM 1.5, 25 °C), 96.5% or higher of the STC efficiency (1000 W/m2 ) is achieved

Dealer information

Mechanical CharacteristicsSolar Cell Polycrystalline silicon 156 × 156 mm (6 inches)

No. of Cells 60 (6 × 10)

Dimensions 1640 × 992 × 35mm (64.6 × 39.1 × 1.4 inches)

Weight 18.2 kgs (40.1 lbs.)

Front Glass 3.2 mm (0.13 inches) tempered glass

Frame Anodized aluminium alloy

Junction Box IP68 rated (3 bypass diodes)

Output Cables TUV (2Pfg1169:2007)

4.0 mm2 (0.006 inches2), symmetrical lengths (-) 1000mm (39.4 inches) and (+) 1000 mm (39.4 inches)

Connectors MC4 compatible

Packing ConfigurationContainer 20’ GP 40’ HC

Pieces per pallet 30 30

Pallets per container 6 28

Pieces per container 180 840

www.suntech-power.com IEC-STP-Wem-NO1.01-Rev 2016

1000 W/m2 800 W/m2 600 W/m2 400 W/m2 200 W/m2

Information on how to install and operate this product is available in the installation instruction. All values indicated in this data sheet are subject to change without prior announcement. The specifications may vary slightly. All specifications are in accordance with standard EN 50380. Color differences of the modules relative to the figures as well as discolorations of/in the modules which do not impair their proper functioning are possible and do not constitute a deviation from the specification.

Electrical CharacteristicsSTC STP265-20/

WemSTP260-20/

WemSTP255-20/

Wem

Maximum Power at STC (Pmax) 265 W 260 W 255 W

Optimum Operating Voltage (Vmp) 31.0 V 30.9 V 30.8 V

Optimum Operating Current (Imp) 8.56 A 8.42 A 8.28 A

Open Circuit Voltage (Voc) 37.8 V 37.7 V 37.6 V

Short Circuit Current (Isc) 9.02 A 8.89 A 8.76 A

Module Efficiency 16.3% 16.0% 15.7%

Operating Module Temperature -40 °C to +85 °C

Maximum System Voltage 1000 V DC (IEC)

Maximum Series Fuse Rating 20 A

Power Tolerance 0/+5 WSTC: lrradiance 1000 W/m2, module temperature 25 °C, AM=1.5;Best in Class AAA solar simulator (IEC 60904-9) used, power measurement uncertainty is within +/- 3%

NOCT STP265-20/Wem

STP260-20/Wem

STP255-20/Wem

Maximum Power at NOCT (Pmax) 194 W 191 W 188 W

Optimum Operating Voltage (Vmp) 28.3 V 28.2 V 28.1 V

Optimum Operating Current (Imp) 6.86 A 6.76 A 6.68 A

Open Circuit Voltage (Voc) 34.8 V 34.8 V 34.7 V

Short Circuit Current (Isc) 7.32 A 7.19 A 7.12 ANOCT: Irradiance 800 W/m2, ambient temperature 20 °C, AM=1.5, wind speed 1 m/s;Best in Class AAA solar simulator (IEC 60904-9) used, power measurement uncertainty is within +/- 3%

STP265 - 20/WemSTP260 - 20/WemSTP255 - 20/Wem

Temperature CharacteristicsNominal Operating Cell Temperature (NOCT) 45±2°C

Temperature Coefficient of Pmax -0.41 %/°C

Temperature Coefficient of Voc -0.33 %/°C

Temperature Coefficient of Isc 0.067 %/°C

250

300

200

150

100

50

0

Curr

ent (

A)

Pow

er(W

)

Voltage (V)

0 5 10 15 20 25 30 35 40

10

9

8

7

6

5

4

3

2

1

0

14×9 [0.55×0.35]Mounting slots8 places

Drainage holes

A A

(Front View)

1640

[64.

6] ±

2 [0

.08]

885

[34.

8] ±

1 [0

.04]

992 [39.1] ± 2 [0.08]13

85 [5

4.5]

± 1

[0.0

4]

290

[11.

4]

290

[11.

4]

1.5 [0.06]

35 [1.4]

35 [1

.4]

11[0.4]

Note: mm[inch]

14.3 [0.6]

942 [37.1] ± 1 [0.04]

6-Ø5.1 [Ø0.2]Grounding holes

(Back View)

1000

[39.

4]

Product label

Barcode

INSTALLED

14

*Black frameproduct can be provided upon request.

KEY FEATURES

Excellent module efficiency of up to 16.79 %

Outstanding low irradiance performance: 96.5 %

High PTC rating of up to 92.0 %

IP67 junction box for long-term weather endurance

CAnAdiAn SolAR inC.545 Speedvale Avenue West, Guelph, Ontario N1K 1E6, Canada, www.canadiansolar.com, [email protected]

CS6P-260| 265| 270P

MAnAgEMEnT SYSTEM CERTiFiCATES*

PRodUCT CERTiFiCATES*

CAnAdiAn SolAR inC. is committed to providing high quality solar products, solar system solutions and services to customers around the world. As a leading PV project developer and manufacturer of solar modules with over 15 GW deployed around the world since 2001, Canadian Solar Inc. (NAS-DAQ: CSIQ) is one of the most bankable solar companies worldwide.

Heavy snow load up to 5400 Pa,wind load up to 2400 Pa

* As there are different certification requirements in different markets, please contact your local Canadian Solar sales representative for the specific certificates applicable to the products in the region in which the products are to be used.

The high quality and reliability of Canadian Solar’smodules is ensured by 15 years of experience inmodule manufacturing, well-engineered moduledesign, stringent BOM quality testing, an automated manufacturing process and 100% EL testing.

ISO 9001:2008 / Quality management system

ISO/TS 16949:2009 / The automotive industry quality management system

ISO 14001:2004 / Standards for environmental management system

OHSAS 18001:2007 / International standards for occupational health & safety

IEC 61215 / IEC 61730: VDE / CE / MCS / JET / SII / CEC AU / INMETRO / CQC

UL 1703 / IEC 61215 performance: CEC listed (US) / FSEC (US Florida)

UL 1703: CSA / IEC 61701 ED2: VDE / IEC 62716: VDE / IEC 60068-2-68: SGS

Take-e-way / UNI 9177 Reaction to Fire: Class 1

linear power output warranty

product warranty on materials and workmanship

Data Sheet INSTALLED

15

ElECTRiCAl dATA | STC*CS6P 260P 265P 270PNominal Max. Power (Pmax) 260 W 265 W 270 WOpt. Operating Voltage (Vmp) 30.4 V 30.6 V 30.8 VOpt. Operating Current (Imp) 8.56 A 8.66 A 8.75 AOpen Circuit Voltage (Voc) 37.5 V 37.7 V 37.9 VShort Circuit Current (Isc) 9.12 A 9.23 A 9.32 AModule Efficiency 16.16 % 16.47 % 16.79 %Operating Temperature -40°C ~ +85°CMax. System Voltage 1000 V (IEC) or 1000 V (UL) Module Fire Performance TYPE 1 (UL 1703) or CLASS C (IEC 61730)Max. Series Fuse Rating 15 AApplication Classification Class APower Tolerance 0 ~ + 5 W

* Under Standard Test Conditions (STC) of irradiance of 1000 W/m2, spectrum AM 1.5 and cell temperature of 25°C.

ElECTRiCAl dATA | noCT*CS6P 260P 265P 270PNominal Max. Power (Pmax) 189 W 192 W 196 WOpt. Operating Voltage (Vmp) 27.7 V 27.9 V 28.1 VOpt. Operating Current (Imp) 6.80 A 6.88 A 6.97 AOpen Circuit Voltage (Voc) 34.5 V 34.7 V 34.8 VShort Circuit Current (Isc) 7.39 A 7.48 A 7.55 A

* Under Nominal Operating Cell Temperature (NOCT), irradiance of 800 W/m2, spectrum AM 1.5, ambient temperature 20°C, wind speed 1 m/s.

EnginEERing dRAWing (mm)

MEChAniCAl dATA Specification DataCell Type Poly-crystalline, 6 inchCell Arrangement 60 (6 x 10)Dimensions 1638 x 982 x 40 mm (64.5 x 38.7 ˣ 1.57 in) Weight 18 kg (39.7 lbs)Front Cover 3.2 mm tempered glassFrame Material Anodized aluminium alloyJ-Box IP67, 3 diodesCable 4 mm2 (IEC) or 4 mm2 & 12 AWG 1000 V (UL) , 1000 mm (39.4 in) (650 mm (25.6 in) is optional)Per Pallet 26 pieces, 515 kg (1135.4 lbs) (quantity & weight per pallet)Per Container (40‘ HQ) 728 pieces

TEMPERATURE ChARACTERiSTiCSSpecification DataTemperature Coefficient (Pmax) -0.41 % / °CTemperature Coefficient (Voc) -0.31 % / °C Temperature Coefficient (Isc) 0.053 % / °CNominal Operating Cell Temperature 45±2 °C

PARTnER SECTion

CAnAdiAn SolAR inC. Jun. 2016. All rights reserved, PV Module Product Datasheet V5.5_EN

The specification and key features described in this datasheet may deviate slightly and are not guaranteed. Due to on-going innovation, research and product enhancement, Canadian Solar Inc. reserves the right to make any adjustment to the information described herein at any time without notice. Please always obtain the most recent version of the datasheet which shall be duly incorporated into the binding contract made by the parties governing all transactions related to the purchase and sale of the products described herein.

Caution: For professional use only. The installation and handling of PV modules requires professional skills and should only be performed by qualified professionals. Please read the safety and installation instructions before using the modules.

PERFoRMAnCE AT loW iRRAdiAnCEIndustry leading performance at low irradiance, average relative efficiency of 96.5 % from an irradiance of 1000 W/m2 to 200 W/m2 (AM 1.5, 25°C).

Scan this QR-code to discover solarprojects built with this module

40

35

11

711

R

5°C

25°C

45°C

65°C

1000 W/m2

800 W/m2

600 W/m2

400 W/m2

Rear View Frame Cross Section A-A

Mounting hole

CS6P-265P / i-V CURVES

10

9

8

7

6

5

4

3

2

1

0

10

9

8

7

6

5

4

3

2

1

0

5 10 15 20 25 30 35 40 5 10 15 20 25 30 35 40V V

A A

A A

1400

1155

500932

1588

40

1638

982

12-11x7MountingHole

GroundingHole

2-Φ5

Data Sheet Data Sheet INSTALLED

16

Data Sheet

TOTALLY BLACK

300 WATTS

YOUR HOME DESERVES THE NeON™ 2 Black

The new LG NeON™ 2 Black has seen many improvements that really matter, from longer warranties and higher efficiency to stronger frames and better wind loading as well as an excellent uniform looking panel. This panel is ideal for homes seeking a visually pleasing solar panel and for roofs where space is tight or where future system expansions are considered e.g. to incorporate battery storage or electric car charging.

The LG NeON™ modules with their bi-facial cells and CELLO technology absorb light from the front and the back of the module. This technology sets a new standard for innovation and was recognised with the 2015 Photovoltaic Innovation Award at the Intersolar Industry Event in Germany.

www.lgenergy.com.au

LG300N1K-G4

Improved 25 Year Performance Warranty

The initial degradation of cells has been improved from-3% to -2%, in the 1st year and the annual rate ofdegradation has fallen from -0.7%/year to -0.6%/ yearthereafter. This brings an 83.6% warranted output after25 years, compared to 80% for many standard panels.

Great Visual Appearance LG NeON™ 2 Black panels with their black cells, black frames and black backsheet give an aesthetically pleasing uniform appearance. Standard competitor poly panels have blue cells and grey aluminium frames. Your home deserves the LG NeON™ 2 Black.

+3.4%p

25yr

12 Years Product Warranty (Parts & Labour)

LG has extended the product warranty of the LG NeON™ 2 Black for an additional 2 years form 10 years to 12 years. Most other competitor panels only give you 10 years and many only supply the panel and ask you to pay for any re –install.

More Power per Square Metre

LG NeON™ 2 Black’s 300W panels are a similarphysical size to many of the industries 250W panels.This means 20% more electricity per squaremetre with LG NeON™ 2 Black. So you can get morepower from your roof space with LG panels.

High Performance Great Looks

m2

INSTALLED

17

Data Sheet

ABOUT LG ELECTRONICSLG Electronics embarked on a solar energy research programme in 1985, using our vast experience in semi-conductors, chemistry and electronics. In 2010, LG Solar successfully released its first Mono X® series, and LG Solar modules are now available in 32 countries. In 2013 and 2015 the LG NeON™ range won the acclaimed Intersolar Award in Germany, which demonstrates LG Solar’s lead in innovation and commitment to the renewable energy industry. With over 300 lesser known brands panels selling in Australia, LG solar panels offer a peace of mind solution.

KEY FEATURES

Cyclone Wind Load Resistance

LG modules have a strong double walled frame and screwed corners. When it comes to wind forces (rear load) many competitor modules are certified to 2400 Pascals. LG modules are certified to more than double - 5400 Pascals, making them very sturdy and strong.

Extensive Testing Programme

LG solar panels are tested between 2 to 4 times the International Standards at our in-house testing laboratories, ensuring a very robust and longer lasting solar module.

Proven Field Performance

LG has been involved in a number of comparison tests of the LG panels against many other brand panels. LG NeON™ models are consistently among the best performing in these tests.

Additional Certification

LG NeON™ 2 Black panels have received additional certification including for; Salt Mist Corrosion to maximum severity 6. Ammonia Resistance certification and PID Resistance Tests.

Strict Quality Control Reliable for the Future

The quality control of LG world-class production processes is monitored and improved to Six Sigma quality control standards, which includes 500+ monitoring points to effectively maintain and improve our uncompromising standards.

Anti PID Technology for Yield Security

PID (Potential Induced Degradation) affects the long term ability of panels to produce high level electricity output. LG panels have anti PID technology and have been successfully tested by leading third party laboratories regarding PID resistance.

Positive Tolerance (0/+3%)

If we sell you a 300 Watt panel then the flash test of this panel will show somewhere between 300W and 309W. Some competitor panels have -/+ tolerance, so you could get a flash test result below the rated Watt, meaning you pay for Watts you never get.

Low LID

The N-type doping of the NeON™ cells results in extremely low Light Induced Degradation (LID) when compared with the standard P-type cells. This means more electricity generation over the life of the panel.

Multi Anti-reflective Coatings Increase Output

LG is using an anti-reflective coating on the panels glass as well as on the cell surface to ensure more light is absorbed in the panel and not reflected. More absorbed light means more electricity generation.

Improved High Temperature Performance

Solar panels slowly lose ability to generate power as they get hotter. LG NeON™ 2 Black, has an improved temperature co-efficient to our previous model of 0.38%, which means in high temperatures LG NeON™ 2 Black panels will deliver higher output.

Anti PID

5400Pa

Fully Automated Production in South Korea

All LG solar panels are manufactured in a custom designed and fully automated production line by LG in Gumi, South Korea ensuring extremely low tolerances. This means great consistency between panels.

“CELLO” Technology Increases Power

“CELLO” Multi wire busbar cell technology lowers electrical resistance and increases panel efficiency, giving more power per panel and provides a more uniform look to the panel.

LG300N1K-G4

5400Pa

INSTALLED

18

Data Sheet

LG NeONTM 2 BLACK – ELEGANT DESIGN. GREAT LOOKS.As its name suggests, the monocrystalline LG NeON™ 2 Black solar module is completely black and will look great on your roof. Featuring the new black CELLO look, it can withstand a static front load of 6,000 Pascals and a rear panel cyclone wind load of 5400 Pascals. LG is also improving its linear performance guarantee to at least 83.6 % of nominal output after 25 years.

With reinforced frame design, LG NeON™ 2 can endure a front load up to 6000 Pa and a rear load up to 5400 Pa.

The LG NeON™ 2 Black solar module featuring a black anodised frame and black backing sheet looks totally black. Its elegant design much more elegant than the blue colour cells and grey/silver frames of conventional polly panels.

UNDERSTATED ELEGANCE FOR BEAUTIFUL ROOFS

You can rely on LG. We test our products with double the intensity specified in the IEC standard.

LG Electronics IEC standard

Minimum requirementMinimum requirement

Moisture/heat testTemperature change test

0

500

1.000

1.500

2.000

2.500

Hours

LG Electronics IEC standard100

200

400

300

Cycles

Our panels have also won a string of International awards.

EXCELLENT QUALITY, INDEPENDENTLY TESTED

LG Solar is part of LG Electronics Inc., a global and financially strong company, with over 50 years of experience in technology.

Good to know: LG Electronics Australia Pty Ltd is the warrantor in Australia and New Zealand for your solar modules. So LG support is only a local phone call away. 0

The warrantor‘s 2013 sales in billions of Aus dollars

22.515 30 45 60 7.5 37.5 52.5

LG Electronics $61.22bn

First Solar $3.82bn

Yingli Solar $2.55bn

Trina Solar $2.05bn

SolarWorld $0.66bn

LOCAL WARRANTY, GLOBAL STRENGTH

POWERFUL DESIGN, GUARANTEED ROBUST

LG NeON™ 2 Black Conventional

Front Load

5400Pa

6000Pa

Standard Requirements

Rear Load

2400Pa

5400Pa

Standard Requirements

Extended Product Warranty

10yrs + 2yrsLG has also extended the product warranty for parts and labour from an industry average 10 years to an impressive 12 years.

INSTALLED

19


2 STC (Standard Test Condition): Irradiance 1000 W/m², Module Temperature 25 °C, AM 1.5. The nameplate power output is measured and determined by LG Electronics at its sole and absolute discretion. The typical change in module efficiency at 200 W/m² in relation to 1000 W/m² is -3.0%.

Electrical Properties (STC2)Module Type 300 W

MPP Voltage Vmpp (V) 32.5

MPP Current Impp (A) 9.26

Open Circuit Voltage Voc (V) 39.7

Short Circuit Current Isc (A) 9.70

Module Efficiency (%) 18.3

Operating Temperature (°C) -40 ~ +90

Maximum System Voltage (V) 1000

Maximum Series Fuse Rating (A) 20

Power Tolerance (%) 0 ~ +3

3 NOCT (Nominal Operating Cell Temperature): Irradiance 800 W/m2, ambient temperature 20 °C, wind speed 1 m/s

Electrical Properties (NOCT3)Module Type 300 W

Maximum Power Pmax (W) 218

MPP Voltage Vmpp (V) 29.5

MPP Current Impp (A) 7.38

Open Circuit Voltage Voc (V) 36.5

Short Circuit Current Isc (A) 7.83

Dimensions (mm)

Mechanical PropertiesCells 6 x 10

Cell Vendor LG

Cell Type Monocrystalline / N-type

Cell Dimensions 156.75 x 156.75 mm

# of Busbar 12 (Multi Wire Busbar)

Dimensions (L x W x H) 1640 x 1000 x 40 mm

Front Load 6000 Pa

Rear Load 5400 Pa

Weight 17.0 ± 0.5 kg

Connector TypeGenuine MC4, IP67 (Male: PV-KST4) (Female: PV-KBT4)

Junction Box IP67 with 3 bypass diodes

Length of Cables 2 x 1000 mm

Front cover High transmission tempered glass

Frame Anodised aluminum with protective black coating

1 1) 1st year: 98%, 2) After 2nd year: 0.6%p annual degradation, 3) 83.6% for 25 years

Certifications and Warranty

Certifications

ISO 9001

IEC 61215, IEC 61730-1/-2

IEC 62716 (Ammonia Test)

IEC 61701(Salt Mist Corrosion Test)

Module Fire Rating Class C

Product Warranty 12 Years

Output Warranty of Pmax(Measurement Tolerance ± 3%)

Linear Warranty1

Temperature CharacteristicsNOCT 46 ± 3 °C

Pmax -0.38 %/°C

Voc -0.28 %/°C

Isc 0.03 %/°C

Current – Voltage characteristics at various irradiance levels

Current – Voltage characteristics at various cell temperatures

Voltage (V)

101000W/m2

600W/m2

200W/m2

800W/m2

400W/m2

6

2

8

4

0 10 3020 4015 3525 455

Cur

rent

(A

)

Temperature (°C)

Isc

Voc

Pmax

140

60

100

20

120

40

80

0-40 900 25-25 50 75

Isc,

Voc

, Pm

ax (

%)

LG300N1K-G4

The distance between the center of the mounting/grounding holes.

40

27

0

17

0

10

5

Ø8.0 (Detail Z)

Mounting holes (8ea)

5.5 x 4.0 (Detail X)

Drain holes (4ea)

Ø4.3Grounding holes (12ea)

1000

(Distance between mounting holes)

(Size of short side)

16

40

(Siz

e of

long

sid

e)

960

11

00

Junction box

1000Cable length

(Dis

tanc

e be

twee

n m

ount

ing

hole

s)

13

00

(Dis

tanc

e be

twee

n m

ount

ing

hole

s)

Detail X

4.0

5.5

R1.5 / R0.06

Detail Y

4.0

7.5

Detail Z

Ø8

10.0

29.0

40

.0

Long side frame

15.0

40

.0

Short side frame

Drain holes (4ea)

4.0 x 7.5 (Detail Y)

10.0

40.0 / 1.57

15.0 / 1.14

Short side frameLong side frame

Copyright © 2015 LG Electronics. All rights reserved.

LG Electronics Australia Pty Ltd Solar Business Group 2 Wonderland Drive, Eastern Creek, NSW 2766Ph: (02) 88054038 E-Mail: [email protected]:lgenergy.com.au

Product specifications are subject to change without prior notice.Date: 08/2015Document: DS-S1C-L4-EN-201505

20

Data Sheet

INVE

RTER

S

SolarEdge Single Phase Inverters(Australia)SE2200-AUS - SE6000-AUS

Specifically designed to work with power optimizersSuperiorefficiency(97.6%)Small,lightweightandeasytoinstallBuilt-inmodule-levelmonitoringInternetconnectionthroughEthernetorWirelessIP65–OutdoorandindoorinstallationFixedvoltageinverter,DC/ACconversiononly

www.solaredge.comUSA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - ISRAEL

12-25

INSTALLED

21

Data Sheet Data Sheet INSTALLED

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein

are trademarks of their respective owners. Date: 09/2014. V.01. Subject to change without notice.

SE2200 -AUS

SE3000 -AUS

SE3500 -AUS

SE4000 -AUS

SE4600 -AUS

SE5000 -AUS

SE6000 -AUS

OUTPUT RatedACPowerOutput 2200 3000 3500 4000 4600 4985 6000 VAMaximumACPowerOutput 2200 3000 3500 4000 4600 4985 6000 VAACOutputVoltage(Nominal) 220/230 VacACOutputVoltageRange 184-264.5 VacACFrequency(Nominal) 50/60±5 HzMaximumContinuousOutputCur-rent 12 16.5 19.5 22 25 27 27 A

ResidualCurrentDetector/Re-sidualCurrentStepDetector 300/30 mA

UtilityMonitoring,IslandingProtection,CountryConfigurableThresholds

Yes

INPUT RecommendedMaximumDCPower*(ModuleSTC) 3000 3750 4350 5000 5750 6250 7500 W

Transformer-less,Ungrounded YesMaximumInputVoltage 500 VdcNominalDCInputVoltage 350 VdcMaximumInputCurrent 8.5 11.5 13.5 15.5 17.5 19.5 23 AdcReverse-PolarityProtection YesGround-FaultIsolationDetection 600kΩSensitivityMaximumInverterEfficiency 97.6 %EuropeanWeightedEfficiency 97.6 97.6 97.5 97.5 97.4 97.4 97.4 %NighttimePowerConsumption <2.5 WADDITIONAL FEATURESSupportedCommunicationInter-faces RS485,RS232,Ethernet,Zigbee(optional)

STANDARD COMPLIANCE Safety IEC-62103(EN50178),IEC-62109,AS-3100GridConnectionStandards VDE0126-1-1,VDE-AR-N-4105,AS-4777,RD-1663,DK5940Emissions IEC61000-6-2,IEC61000-6-3,IEC61000-3-11,IEC61000-3-12,FCCpart15classBRoHS YesINSTALLATION SPECIFICATIONS ACOutput CableGland-diameter9-16 mm DCInput 1MC4pair 2MC4pairsDimensions(HxWxD) 540x315x172 540x315x191 mmWeight 20.2 21.7 kgCooling NaturalConvectionNoise <25 dBAOperatingTemperatureRange -20-+50 ˚CProtectionRating IP65-OutdoorandIndoorBracketMounted(BracketProvided)

Single Phase Inverters(Australia) SE2200-AUS - SE6000-AUS

* Limitedto135%ofACpower.

22

Data Sheet

POW

ER O

PTIM

IZER

SolarEdge Power OptimizerModule Add-On P300 / P350 / P404 / P405 / P500

PV power optimization at the module-levelUp to 25% more energy Superiorefficiency(99.5%)Mitigatesalltypesofmodulesmismatch-loss,frommanufacturingtolerancetopartialshadingFlexiblesystemdesignformaximumspaceutilizationFastinstallationwithasingleboltNextgenerationmaintenancewithmodulelevelmonitoringModule-levelvoltageshutdownforinstallerandfirefightersafety

www.solaredge.comUSA - CANADA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL

INSTALLED

23

Data Sheet

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGEare trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein


P300 (for 60-cell modules)

P350 (for high-power 60-cell and for

72-cell modules)

P500 (for 96-cell modules)

P404 (for 60-cell and 72-cell,

short strings)

P405 (for thin film

modules)

INPUTRatedInputDCPower(1) 300 350 500 405 405 WAbsoluteMaximumInputVoltage (Vocatlowesttemperature) 48 60 80 80 125 Vdc

MPPTOperatingRange 8-48 8-60 8-80 12.5-80 12.5-105 VdcMaximumContinuousInputCurrent(Isc) 10 11 10.1 AdcMaximumEfficiency 99.5 %WeightedEfficiency 98.8 %OvervoltageCategory IIOUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER)MaximumOutputCurrent 15 AdcMaximumOutputVoltage 60 85 VdcOUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF)SafetyOutputVoltageperPowerOptimizer 1 VdcSTANDARD COMPLIANCEEMC FCCPart15ClassB,IEC61000-6-2,IEC61000-6-3Safety IEC62109-1(classIIsafety),UL1741RoHS YesFireSafety VDE-AR-E2100-712:2013-05INSTALLATION SPECIFICATIONS MaximumAllowedSystemVoltage 1000 Vdc

Dimensions(WxLxH) 128x152x27.5/5x5.97x1.08 128x152x35/ 5x5.97x1.37

128x152x43/5x5.97x1.69

128x152x50/5x5.97x1.96 mm/in

Weight(includingcables) 760/1.7 830/1.8 994/2.1 1064/2.3 gr/lbInputConnector MC4(2) OutputConnector MC4OutputWireLength 0.95/3.0 1.2/3.9 m/ftOperatingTemperatureRange -40-+85/-40-+185 ˚C/˚FProtectionRating IP68/NEMA6PRelativeHumidity 0-100 %

SolarEdge Power Optimizer Module Add-OnP300 / P350 / P404 / P405 / P500

(1)RatedSTCpowerofthemodule.Moduleofupto+5%powertoleranceallowed.(2)ForotherconnectortypespleasecontactSolarEdge.

PV SYSTEM DESIGN USING ASOLAREDGE INVERTER(3) SINGLE PHASE THREE PHASE

MinimumStringLength(PowerOptimizers)

P300,P350,P500 8 16

P404,P405 6 13

MaximumStringLength(PowerOptimizers) 25 50

MaximumPowerperString 5250 11250 W

ParallelStringsofDifferentLengthsorOrientations Yes(3) ItisnotallowedtomixP404/P405withP300/P350/P500/P600/P700inonestring.

INSTALLED

24

Data Sheet

SolarEdge StorEdge Interface SESTI-S1

www.solaredge.com

SolarEdge StorEdge Interface AllowstoconnecttheTeslaPowerwallHomeBatterytoaSolarEdgeinverterSimpleinstallationandconnectivityofthebatteryandtheSolarEdgeMeterConnectstotheSolarEdgeinverterinparalleltothePVstringsCanbeusedtoupgradeexistingSolarEdgesystemsDesignedtoeliminateDCvoltageandcurrentduringinstallation,maintenanceorfirefighting

USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - ISRAEL

STO

RED

GETM

• StorEdge Interface •StorEdge Interface •

Stor

Edge

Inter

face

10Years

Warranty

INSTALLED

25

Data Sheet

* FormorebatteriesperInterface,contactSolarEdge.

Inverter

StorEdge Interface

Battery

PV String 2

PV String 1 To the AC

Com

m

DC+

DC-

AC

ACIN

DC COMM

TotheMeter

LV2

LVIn

terface

& C

omm

LV1BATIN

DC+DC-

INVOUT

DC+DC-

To the AC



StorEdge Interface SESTI-S1

BATTERY DC INPUT NumberofBatteriesperInterface* 1

MaxInputVoltage 1000 Vdc

MaxInputCurrent 8.5 Adc

DCFusesonPlusandMinus 12A(fieldreplaceable)

ADDITIONAL FEATURES

BatteryCommunicationInterface RS485

MeterCommunicationInterface RS485

BatteryPowerSupply Yes,12V/53W

STOREDGE INTERFACE POWER SUPPLY

ACInputVoltage(Nominal) 220/230 Vac

ACInputVoltageRange 184-264.5 Vac

ACFrequency(Nominal) 50/60±5 Hz

MaxACInputCurrent 300 mA

INSTALLATION SPECIFICATIONS

ACinputglandcablediameter/wirecrosssection 6-13mm/1-2.5mm2

DCinput 1MC4pair

Dimensions(HxWxD) 206.6x316x117.5 mm

Weight 3 kg

Min-MaxOperatingTemperature -20to+60 ˚C

ProtectionRating IP65

Installation Wallmounted

INSTALLED

26

Data Sheet

SolarEdge Modbus Meter for AustraliaSE-WNC-3Y400-MB-K1

ACC

ESSO

RIES

www.solaredge.com

Modbus Meter for SolarEdge Installations

Highaccuracymeterreadings(upto0.5%)forproduction/consumptionreadings

SuppliesmeterreadingstotheinverterforFeed-inLimitation

Smallandeasytoinstall-fitsinstandardelectricalpanel

Supportsresidential,commercialandutility-sizeinstallations

USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL

INSTALLED

27

Data Sheet



SE-WNC-3Y400-MB-K1 UNITSELECTRICAL SERVICE OperatingVoltageRange-LinetoNeutral/LinetoLine 184-264.5/320-460 VacAC Frequency 50/60 HzGrids Supported - Single Phase ; Three Phase* L/N/PE;L1/L2/L3/N/PEPowerConsumption(typ.) 1.8 WCOMMUNICATION SupportedCommunicationInterfaces RS485Responsetime ≤1** secACCURACY (@25°C, PF:0.7- 1)1%-100%ofRatedCTCurrent ±1 %STANDARD COMPLIANCE Safety IEC61010-1

Immunity EN61326,EN61000-4-2,EN61000-4-3,EN61000-4-4,EN61000-4-5,EN61000-4-6,EN61000-4-11

Emissions EN55022ClassBINSTALLATION SPECIFICATIONSDimensions (HxWxD) 85x153×38 mmWeight 310 gmEnclosuretype Highimpact,ABSand/orABS/PCplasticUL94V-0,IECFV-0OperatingTemperatureRange -30to55 °CRelativeHumidity(noncondensing) 5-90 %ProtectionRating Indoor(OutdoorwheninstalledinanIP66/NEME3R/4enclosure)MountingType DINRail/Wallmount

SolarEdge Modbus Meter for AustraliaSE-WNC-3Y400-MB-K1

CURRENT TRANSFORMER MODEL(*)

RATED RMSCURRENT

DIMENSIONS(INTERNAL/ EXTERNAL)

SE-ACT-0750-250-C6 250A 20x20mm/61x60.4mm* Onecurrenttransformerperphase;forotherratingscontactSolarEdge

ACT

Meter Dimensions

Whenorderingameter,ordercurrenttransformersaswell:

Current Transformer Dimensions

ThewarrantyandserviceforthisproductisprovideddirectlybyContinentalControlSystems;formoredetails,pleaseseehttp://www.ccontrolsys.com/w/WattNode_Modbus*PE(ProtectiveEarth)connectionisnotrequiredformeteroperation**Whenmeterisconnectedatgridconnectionpoint,andwhenRS485isusedformultipleinverters

INSTALLED

28

Data Sheet

www.solaredge.comUSA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - ISRAEL

SolarEdge Wi-Fi Communication SolutionSE1000-WIFI01

COM

MU

NIC

ATIO

N

Simple Wireless ConnectivityConnects SolarEdge inverters wirelessly to a Wi-Fi routerWi-Fi module installed within the inverter enclosure for outdoor resilience Antenna external to inverter for wider rangeRobustcommunicationswithsupportof802.11b/g/nstandards

Wi-Fi Router

SolarEdgePortal

www

Antenna

Wi-Fi module

Inverter

INSTALLED

29

Data Sheet



SolarEdge Wi-Fi Communication Solution SE1000-WIFI01

RF PERFORMANCETransmitpower 16 dBmReceiverSensitivity -93to-71 dBmAntenna connector RP-SMAEIRP with antenna 20 dBmOutdoor (LOS) range 400/1300 m/ftIndoor range1 50/160 m/ftMax.powerconsumption@transmit 1 W

NETWORKING AND SECURITYSecurity WPA-PSK,WPA2-PSKandWEPChannels 13channels

WIRELESS LANStandards 802.11b/g/nData rates 1Mbpsto72Mbps

Modulation 802.11b:CCK,DSSS;802.11g/n:OFDMwithBPSK,QPSK,16-QAM,64-QAM

INSTALLATION SPECIFICATIONSAntenna,mountingbracketandRFcable IncludedDimensions (H x W x D) 22.0x32.9x4.1/0.9x1.3x0.2 mm/in

Ingressprotection IP65(IP20/indoorratedwheninstalledinsideControland CommunicationGatewayorFirefighterGateway)

CERTIFICATIONEMCApprovals ETSI(Europe),C-Tick(Australia),Telec(Japan)

1Approximatevalues,maydifferdependingonspecificinstallationconditions

Scenario A: Single inverter connection

Scenario C: Multiple inverter Wi-Fi connection

Scenario B: Multiple inverter connection with RS485 bus (up to 32 SolarEdge devices)

Inverter

Wi-Fi Router

www

SolarEdgePortal

RS485 RS485 RS485

Slave SlaveSlave

Wi-Fi Router

www

SolarEdgePortal

Master

Wi-Fi Router

www

SolarEdgePortal

INSTALLED

30

Data Sheet

TECHNICAL DATA FRONIUS SYMO HYBRID1)

INPUT DATA SYMO HYBRID 3.0-3-S SYMO HYBRID 4.0-3-S SYMO HYBRID 5.0-3-S

OUTPUT DATA SYMO HYBRID 3.0-3-S SYMO HYBRID 4.0-3-S SYMO HYBRID 5.0-3-S

BATTERY INPUT SYMO HYBRID 3.0-3-S SYMO HYBRID 4.0-3-S SYMO HYBRID 5.0-3-S

INSTALLED

31

TECHNICAL DATA FRONIUS SYMO HYBRID1)

GENERAL DATA SYMO HYBRID 3.0-3-S SYMO HYBRID 4.0-3-S SYMO HYBRID 5.0-3-S

EFFICIENCY SYMO HYBRID 3.0-3-S SYMO HYBRID 4.0-3-S SYMO HYBRID 5.0-3-S

INTERFACES SYMO HYBRID 3.0-3-S SYMO HYBRID 4.0-3-S SYMO HYBRID 5.0-3-S

PROTECTION DEVICES SYMO HYBRID 3.0-3-S SYMO HYBRID 4.0-3-S SYMO HYBRID 5.0-3-S

32


33

34

INSTALLEDData Sheet

35

Documents

Data Sheet - Bradford Solar · 13 Data Sheet Data Sheet E-mail: [email protected] IEC-STP-Vem-NO1.01-Rev 2014 Current-Voltage & Power-Voltage Curve (265-20) Excellent performance