44
ICB REVISED 5/ 2019 DESIGN GUIDE OVENS

DESIGN GUIDE OVENS - Sub-Zero

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: DESIGN GUIDE OVENS - Sub-Zero

ICB REVISED 5/ 2019

D E S I G N G U I D E O V E N S

Page 2: DESIGN GUIDE OVENS - Sub-Zero

TA B L E O F C O N T E N T S

3

1 5

2 7

M S E R I E S B U I L T- I N O V E N S

E S E R I E S B U I L T - I N O V E N S

C O N V E C T I O N S T E A M O V E N S

M I C R O W A V E O V E N S

W A R M I N G D R A W E R S

Features and specifications are subject to change at any time without notice.

Throughout this guide, dimensions may vary by ± 3 mm.

3 2

3 8

Page 3: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 3

M Series Built-In Ovens

Four striking looks are just the beginning. Superior perfor-mance features include our advanced Dual VertiCross™ convection fan system, touch-screen controls, convenient preset cooking programs and improved interior lighting. There is more usable space inside for deliciousness on a grand scale. M series ovens can be installed in a standard or flush inset application.

M SERIES OVENS

UPPER OVEN LOWER OVEN

M SERIES OVENS

TRANSITIONAL

ICBSO30PM/S/PH

ICBSO30TM/S/TH

ICBDO30PM/S/PH

ICBDO30TM/S/TH

PROFESSIONAL

ICBSO30CM/B

ICBDO30CM/B

CONTEMPORARY

ICBSO30CM/S

ICBDO30CM/S

BU

ILT

-IN

OV

EN

S

Page 4: DESIGN GUIDE OVENS - Sub-Zero

4 | English

M SERIES OVENS

M Series Built-In Ovens

TRANSITIONAL SINGLE OVEN

TRANSITIONAL DOUBLE OVEN

OPEN OVEN DOOR584 mm

BEHIND FRAME

723mm

686mm

65mm

46 mm

543mm

22mm

36 mmCONDUITCHANNEL

218mm

51 mm

759 mm

OPEN OVEN DOOR

584 mmBEHIND FRAME

1291mm

1254mm

65mm

46 mm

543mm

22mm

36 mmCONDUITCHANNEL

218mm

51 mm

759 mm

BU

ILT

-IN

OV

EN

S

Page 5: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 5

M SERIES OVENS

M Series Built-In Ovens

PROFESSIONAL SINGLE OVEN

OPEN OVEN DOOR584 mm

BEHIND FRAME

723mm

686mm

83mm

46 mm

543mm

22mm

36 mmCONDUITCHANNEL

218mm

51 mm

759 mm

OPEN OVEN DOOR

584 mmBEHIND FRAME

1291mm

1254mm

759 mm

46 mm

543mm

83mm

22mm

36 mmCONDUITCHANNEL

218mm

51 mmUPPER OVEN LOWER OVEN

PROFESSIONAL DOUBLE OVEN

BU

ILT

-IN

OV

EN

S

Page 6: DESIGN GUIDE OVENS - Sub-Zero

6 | English

M SERIES OVENS

OPEN OVEN DOOR

584 mmBEHIND FRAME

1291mm

1254mm

46 mm

543mm

22mm

36 mmCONDUITCHANNEL

218mm

51mm

759 mm

OPEN OVEN DOOR584 mm

BEHIND FRAME

723mm

686mm

46 mm

543mm

22mm

36 mmCONDUITCHANNEL

218mm

51mm

759 mm

M Series Built-In Ovens

CONTEMPORARY SINGLE OVEN—STAINLESS STEEL

CONTEMPORARY DOUBLE OVEN—STAINLESS STEEL

BU

ILT

-IN

OV

EN

S

Page 7: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 7

M SERIES OVENS

OPEN OVEN DOOR

584 mmBEHIND FRAME

1291mm

1254mm

46 mm

543mm

25mm

36 mmCONDUITCHANNEL

218mm

51 mm

759 mm

OPEN OVEN DOOR584 mm

BEHIND FRAME

723mm

686mm

46 mm

543mm

25mm

36 mmCONDUITCHANNEL

218mm

51 mm

759 mm

M Series Built-In Ovens

CONTEMPORARY SINGLE OVEN—BLACK GLASS

CONTEMPORARY DOUBLE OVEN—BLACK GLASS

BU

ILT

-IN

OV

EN

S

Page 8: DESIGN GUIDE OVENS - Sub-Zero

8 | English

M SERIES OVENS

Planning Information

The M series oven can be installed in a standard or flush inset application. If a cooktop is being installed above an oven, a minimum of 6 mm is required between units. Loca-tion of the electrical supply within the oven opening may require additional cabinet depth.

Finish the edges of the opening. They may be visible when the door is open.

For standard installations, face trim will overlap stiles and rails. Refer to the chart below.

For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.

INSTALLATION REQUIREMENTS

BASE SUPPORT MIN

Single Oven 115 kgDouble Oven 181 kg

TRIM OVERLAP

Top 25 mmBottom 0 mmSides 18 mm

DUAL INSTALLATION

Two 76 cm single M series ovens can be installed side by side in a standard or flush inset application. A dual instal-lation kit is required. To maintain appropriate airflow, the ovens must be installed into one opening. Any cosmetic or structural material placed between the ovens will impede airflow and is not recommended. Refer to illustrations on the following pages.

The dual installation kit is available through an authorized Wolf dealer.

ELECTRICAL

Installation must comply with all applicable electrical codes and be properly grounded (earthed).

Locate the electrical supply flush with the back wall and within the shaded area shown in the illustration for your spe-cific installation on the following pages. For ease of instal-lation, the electrical supply for the oven can be placed in an adjacent cabinet within reach of the conduit.

Performance may be compromised if the electrical supply is less than 220 volts.

The oven is supplied with a single phase and 3-phase convertible power inlet box. The wiring diagram covering the control circuit is provided with the oven.

ELECTRICAL REQUIREMENTS

SINGLE OVEN SINGLE PHASE 3-PHASE

Required Power Supply 220-240 V AC50/60 Hz

380-415 V AC50 Hz

Maximum Connected Load 4.2–4.8 kW 3.0–3.6 kW

DOUBLE OVEN SINGLE PHASE 3-PHASE

Required Power Supply 220-240 V AC50/60 Hz

380-415 V AC50 Hz

Maximum Connected Load 8.4–9.6 kW 4.2–4.8 kW

BU

ILT

-IN

OV

EN

S

Page 9: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 9

M SERIES OVENS

M Series Single Oven

STANDARD INSTALLATION

E127mm

E

E

102mm

FRONT VIEWSIDE VIEW

NOTE: Location of electrical supply within opening may require additional cabinet depth.

591 mmOPENING

DEPTH

TOP VIEW

699 mmOPENINGHEIGHT

WOPENING WIDTH

OPENING WIDTH W

76 cm Model 724 mm

BU

ILT

-IN

OV

EN

S

Page 10: DESIGN GUIDE OVENS - Sub-Zero

10 | English

M SERIES OVENS

M Series Double Oven

STANDARD INSTALLATION

E127mm

102mm

E

E

FRONT VIEWSIDE VIEW

NOTE: Location of electrical supply within opening may require additional cabinet depth.

1267 mmOPENINGHEIGHT

591 mmOPENING

DEPTH

WOPENING WIDTH

432 mmTYPICAL

TOP VIEW

OPENING WIDTH W

76 cm Model 724 mm

BU

ILT

-IN

OV

EN

S

Page 11: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 11

M SERIES OVENS

M Series Single Oven

FLUSH INSET INSTALLATION

E127mm

102mm

FRONT VIEWSIDE VIEW

*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.**22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.***Dimension provides minimum reveals.

NOTE: Location of electrical supply within opening may require additional cabinet depth.

729 mmFLUSH INSET

HEIGHT***

28 mm

3 mm

21 mm

610 mmFLUSH INSET

DEPTH

22 mmOR

25 mm**FINISHEDCLEATS*

WFLUSH INSET WIDTH***

TOP VIEW

E

E

FLUSH INSET WIDTH W

76 cm Model 765 mm

BU

ILT

-IN

OV

EN

S

Page 12: DESIGN GUIDE OVENS - Sub-Zero

12 | English

M Series Double Oven

FLUSH INSET INSTALLATION

E127mm

102mm

FRONT VIEWSIDE VIEW

*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.**22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.***Dimension provides minimum reveals.

NOTE: Location of electrical supply within opening may require additional cabinet depth.

1297 mmFLUSH INSET

HEIGHT***

28 mm

3 mm

21 mm

610 mmFLUSH INSET

DEPTH

22 mmOR

25 mm**FINISHEDCLEATS*

WFLUSH INSET WIDTH***

432 mmTYPICAL

TOP VIEW

E

E

FLUSH INSET WIDTH W

76 cm Model 765 mm

M SERIES OVENS

BU

ILT

-IN

OV

EN

S

Page 13: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 13

M SERIES OVENS

BU

ILT

-IN

OV

EN

S

E127mm

102mm

E127mm

102mm

E E

FRONT VIEWSIDE VIEW

NOTE: Location of electrical supply within opening may require additional cabinet depth. A dual installation kit is required for this installation.

TOP VIEW

591 mmOPENING

DEPTH

699 mmOPENINGHEIGHT W

OPENING WIDTH

M Series Single Oven

DUAL STANDARD INSTALLATION

DUAL OPENING WIDTH W

Two 76 cm Models 1486 mm

Page 14: DESIGN GUIDE OVENS - Sub-Zero

14 | English

M SERIES OVENS

BU

ILT

-IN

OV

EN

S

E127mm

102mm

E127mm

102mm

FRONT VIEWSIDE VIEW

TOP VIEW

EE

FINISHEDCLEATS*

*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.**22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.***Dimension provides minimum reveals.

NOTE: Location of electrical supply within opening may require additional cabinet depth. A dual installation kit is required for this installation.

729 mmFLUSH INSET

HEIGHT***

28 mm

3 mm

21 mm

610 mmFLUSH INSET

DEPTH

22 mmOR

25 mm**

WFLUSH INSET WIDTH***

M Series Single Oven

DUAL FLUSH INSET INSTALLATION

DUAL FLUSH INSET WIDTH W

Two 76 cm Models 1527 mm

Page 15: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au| 15

E Series Built-In Ovens

Stainless models feature a redesigned stainless steel touch-action control panel, helping to create great meals with ease, as well as adding a striking design feature to the kitchen. Smart technology gives the E series ten cooking modes, with Wolf’s innovative dual convection in single ovens and in the upper unit of double ovens. Wolf E series ovens are crafted of stainless steel. Tubular handles have been updated to match the rest of the new Wolf cooking appliance offering, providing a more cohesive look. E series ovens can be installed in a standard or flush inset application.

ICBSO30CE/B/TH

ICBSO30TE/S/TH

ICBDO30TE/S/TH

ICBDO30CE/B/TH

ICBSO30PE/S/PH

ICBDO30PE/S/PH

E SERIES OVENS

E SERIES OVENS

TRANSITIONAL

PROFESSIONAL

CONTEMPORARY

WARM LIGHT TEMP MODE TIMER TIME OFFOK

ICBSO24TE/S/TH

BU

ILT

-IN

OV

EN

S

Page 16: DESIGN GUIDE OVENS - Sub-Zero

16 | English

E SERIES OVENS

60 cm E Series Ovens

ICBSO24TE/S/TH

OPEN OVEN DOOR

546 mmBEHIND FRAME

597mm

591mm

64mm

559 mm

460mm

22 mm

597 mm

WARM LIGHT TEMP MODE TIMER TIME OFFOK

BU

ILT

-IN

OV

EN

S

Page 17: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 17

E SERIES OVENS

76 cm E Series Ovens

TRANSITIONAL SINGLE OVEN

603 mmBEHIND FRAME

708mm

759 mm

CONDUITCHANNEL 689

mm

70mm

76 mm

718 mm

559mm

244mm

225mm

25 mm

OPEN OVEN DOOR

OPEN OVEN DOOR

603 mmBEHIND FRAME

1280mm

1261mm

759 mm 70mm

CONDUITCHANNEL

718 mm

559mm

244mm

225mm

76 mm

25 mm

TRANSITIONAL DOUBLE OVEN

BU

ILT

-IN

OV

EN

S

Page 18: DESIGN GUIDE OVENS - Sub-Zero

18 | English

E SERIES OVENS

76 cm E Series Ovens

PROFESSIONAL SINGLE OVEN

603 mmBEHIND FRAME

708mm

759 mm

CONDUITCHANNEL 689

mm

86mm

76 mm

718 mm

559mm

244mm

225mm

25 mm

OPEN OVEN DOOR

OPEN OVEN DOOR

603 mmBEHIND FRAME

1280mm

1261mm

759 mm

CONDUITCHANNEL

718 mm

559mm

244mm

225mm

76 mm

25 mm

86mm

PROFESSIONAL DOUBLE OVEN

BU

ILT

-IN

OV

EN

S

Page 19: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 19

E SERIES OVENS

OPEN OVEN DOOR

603 mmBEHIND FRAME

1280mm

1257mm

759 mm 76mm

32 mm

CONDUITCHANNEL

76 mm

718 mm

559mm

244mm

225mm

OPEN OVEN DOOR

603 mmBEHIND FRAME

708mm

759 mm

32 mm

687mm

76mm

CONDUITCHANNEL

76 mm

718 mm

559mm

244mm

225mm

76 cm E Series Ovens

CONTEMPORARY SINGLE OVEN

CONTEMPORARY DOUBLE OVEN

BU

ILT

-IN

OV

EN

S

Page 20: DESIGN GUIDE OVENS - Sub-Zero

20 | English

BASE SUPPORT MIN

60 cm Single Oven 68 kg76 cm Single Oven 115 kg76 cm Double Oven 181 kg

TRIM OVERLAP 60 cm MODEL 76 cm MODEL

Top 6 mm 13 mmBottom 0 mm 3 mmSides 17 mm 17 mm

ELECTRICAL

Installation must comply with all applicable electrical codes and be properly grounded (earthed).

Locate the electrical supply flush with the back wall and within the shaded area shown in the illustration for your specific installation on the following pages. For ease of installation, the electrical supply for the oven can be placed in an adjacent cabinet within reach of the conduit. The 76 cm units are supplied with terminal box convertible to single or 3-phase.

The wiring diagram covering the control circuit is provided with the oven.

ELECTRICAL REQUIREMENTS

60 cm SINGLE OVEN

Electrical Supply 220-240 V AC, 50 HzService 3400 WReceptacle grounding-type (earthed)Power Cord 1.8 m

ELECTRICAL REQUIREMENTS

76 cm SINGLE OVEN SINGLE PHASE 3-PHASE

Required Power Supply 220-240 V AC50/60 Hz

380-415 V AC50 Hz

Max Connected Load 4.4 kW 4.4 kWTotal Amps 19 19

76 cm DOUBLE OVEN SINGLE PHASE 3-PHASE

Required Power Supply 220-240 V AC50/60 Hz

380-415 V AC50 Hz

Max Connected Load 7.4 kW 5.1 kWTotal Amps 32 22

E SERIES OVENS

Planning Information

The E series oven can be installed in a standard or flush inset application. If a cooktop is being installed above an oven, a minimum of 6 mm is required between units. Loca-tion of the electrical supply within the oven opening may require additional cabinet depth.

Finish the edges of the opening. They may be visible when the door is open.

For standard installations, face trim will overlap stiles and rails. Refer to the chart below.

For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.

INSTALLATION REQUIREMENTS

BU

ILT

-IN

OV

EN

S

Page 21: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 21

E SERIES OVENS

60 cm E Series Oven

STANDARD INSTALLATION

FRONT VIEWSIDE VIEW

NOTE: Electrical supply must be located in adjacent cabinet within .9 m of opening.

HOPENINGHEIGHT

572 mmOPENING

DEPTH

TOP VIEW

562 mmOPENING WIDTH

EE

OPENING HEIGHT H

Model ICBSO24TE/S/TH 591 mm

BU

ILT

-IN

OV

EN

S

Page 22: DESIGN GUIDE OVENS - Sub-Zero

22 | English

E SERIES OVENS

76 cm E Series Single Oven

STANDARD INSTALLATION

E127mm

E

E

102mm

FRONT VIEWSIDE VIEW

NOTE: Location of electrical supply within opening may require additional cabinet depth.Dashed line represents profile of unit.

610 mmOPENING

DEPTH

TOP VIEW

692 mmOPENINGHEIGHT

724 mmOPENING WIDTH

BU

ILT

-IN

OV

EN

S

Page 23: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 23

E127mm

102mm

E

E

FRONT VIEWSIDE VIEW

NOTE: Location of electrical supply within opening may require additional cabinet depth.Dashed line represents profile of unit.

1264 mmOPENINGHEIGHT

610 mmOPENING

DEPTH

724 mmOPENING WIDTH

432 mmTYPICAL

TOP VIEW

76 cm E Series Double Oven

STANDARD INSTALLATION

E SERIES OVENS

BU

ILT

-IN

OV

EN

S

Page 24: DESIGN GUIDE OVENS - Sub-Zero

24 | English

603 mmFLUSH INSET WIDTH**

FRONT VIEWSIDE VIEW

584 mmFLUSHINSETDEPTH22 mm

*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.

NOTE: Electrical supply must be located in adjacent cabinet within .9 m of opening.

H FLUSH INSET

HEIGHT**

10 mm

6 mm

TOP VIEW

EE

24 mm

FINISHEDCLEATS*

60 cm E Series Oven

FLUSH INSET INSTALLATION

E SERIES OVENS

FLUSH INSET HEIGHT H

Model ICBSO24TE/S/TH 603 mm

BU

ILT

-IN

OV

EN

S

Page 25: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 25

E SERIES OVENS

E127mm

102mm

FRONT VIEWSIDE VIEW

*Will be visible and should be finished to match cabinetry.**25 mm for professional and transitional models and 32 mm for contemporary model.***Dimension provides minimum reveals.

NOTE: Location of electrical supply within opening may require additional cabinet depth.Dashed line represents profile of unit.

714 mmFLUSH INSET

HEIGHT***

19 mm

6 mm

20 mm

635 mmFLUSH INSET

DEPTHFINISHEDCLEATS*

765 mmFLUSH INSET WIDTH***

25 mmOR

32 mm**

TOP VIEW

981 mmTYPICAL

E

E

76 cm E Series Single Oven

FLUSH INSET INSTALLATION

BU

ILT

-IN

OV

EN

S

Page 26: DESIGN GUIDE OVENS - Sub-Zero

26 | English

76 cm E Series Double Oven

FLUSH INSET INSTALLATION

E127mm

102mm

E

E

FRONT VIEWSIDE VIEW

*Will be visible and should be finished to match cabinetry.**25 mm for professional and transitional models and 32 mm for contemporary model.***Dimension provides minimum reveals.

NOTE: Location of electrical supply within opening may require additional cabinet depth.Dashed line represents profile of unit.

1289 mmFLUSH INSET

HEIGHT***

432 mmTYPICAL

19 mm

6 mm

20mm

765 mmFLUSH INSET WIDTH***

635 mmFLUSH INSET

DEPTHFINISHEDCLEATS*

25 mmOR

32 mm**

TOP VIEW

E SERIES OVENS

BU

ILT

-IN

OV

EN

S

Page 27: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 27

CONVECTION STEAM OVENS

Convection Steam Ovens

The legacy of the “combination oven” goes back decades, to innovative chefs in America and Europe who embraced the combination of air movement with superheated steam to achieve superior results—from breads and roasts to delicate fishes, seafood and vegetables. Wolf combines the benefits of convection and steam for the most innovative steam oven on the market today. Virtually any dish prepared in a con-ventional oven, range or microwave can also be prepared in the Wolf convection steam oven—with more control. Two widths and three distinct styles compliment the look of Wolf ovens, ranges and cooktops. Convection steam ovens can be installed in a standard or flush inset application.

BU

ILT

-IN

OV

EN

S

CONVECTION STEAM OVENS

TRANSITIONAL

ICBCSO30TE/S/THICBCSO30TM/S/TH

PROFESSIONAL

CONTEMPORARY

ICBCSO30PE/S/PHICBCSO30PM/S/PH

ICBCSO30CM/B/TH

ICBCSO24TE/S/TH

ICBCSO30CMBICBCSO30CMS

Page 28: DESIGN GUIDE OVENS - Sub-Zero

28 | English

CONVECTION STEAM OVENS

BU

ILT

-IN

OV

EN

S

OPEN OVEN DOOR

454mm

446mm

64mm

538 mm

360mm

22 mm

546 mmBEHIND FRAME

WWIDTH

Convection Steam Ovens

TRANSITIONAL

PROFESSIONAL

OPEN OVEN DOOR

454mm

446mm

83mm

538 mm

360mm

22 mm

759 mm 546 mmBEHIND FRAME

CONTEMPORARY

454mm

446mm

64mm

22 mm

759 mm

OPEN OVEN DOOR

538 mm

360mm

546 mmBEHIND FRAME

WIDTH W

60 cm Transitional 597 mm

76 cm Transitional 759 mm

Page 29: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 29

CONVECTION STEAM OVENS

ELECTRICAL

Installation must comply with all applicable electrical codes and be properly grounded (earthed).

Locate the electrical supply as shown in the illustrations on the following pages. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

Performance may be compromised if the electrical supply is less than 220 volts.

ELECTRICAL REQUIREMENTS

Electrical Supply 220-240 V AC, 50 Hz

Service 3800 W

Receptacle grounding-type (earthed)

Power Cord 1.8 m

Planning Information

The convection steam oven can be installed in a standard or flush inset application. The electrical supply for the oven must be located in an adjacent cabinet.

Finish the edges of the opening. They may be visible when the door is open.

For standard installations, face trim will overlap stiles and rails. Refer to the chart below.

For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.

INSTALLATION REQUIREMENTS

BASE SUPPORT MIN

Convection Steam Oven 45 kg

TRIM OVERLAP 60 cm MODEL 76 cm MODEL

Top 5 mm 5 mmBottom 0 mm 0 mmSides 18 mm 98 mm

BU

ILT

-IN

OV

EN

S

Page 30: DESIGN GUIDE OVENS - Sub-Zero

30 | English

Convection Steam Oven

STANDARD INSTALLATION

FRONT VIEWSIDE VIEW

NOTE: Both 60 cm and 76 cm models require the same opening dimensions.Electrical supply must be located in adjacent cabinet within .9 m of opening.Dashed line represents profile of unit.

448 mmOPENINGHEIGHT

548 mmOPENING

DEPTH

TOP VIEW

WOPENING WIDTH

EE

CONVECTION STEAM OVENS

OPENING WIDTH W

60 cm Model 562 mm

76 cm Model 562 mm

BU

ILT

-IN

OV

EN

S

Page 31: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 31

Convection Steam Oven

FLUSH INSET INSTALLATION

WFLUSH INSET WIDTH**

FRONT VIEWSIDE VIEW

FINISHEDCLEATS*

584 mmFLUSH INSET

DEPTH25 mm

*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.

NOTE: Electrical supply must be located in adjacent cabinet within .9 m of opening.Dashed line represents profile of unit.

460 mm FLUSH INSET

HEIGHT**

8 mm

3 mm

TOP VIEW

EE

A

CONVECTION STEAM OVENS

FLUSH INSET WIDTH W A

60 cm Model 603 mm 21 mm

76 cm Model 765 mm 102 mm

BU

ILT

-IN

OV

EN

S

Page 32: DESIGN GUIDE OVENS - Sub-Zero

32 | English

MICROWAVE OVENS

Microwave Ovens

As true cooking instruments, Wolf microwave ovens have features that make fast meals better meals. New drop down door microwaves feature a door that hinges at the bottom. Drop down door microwaves are designed to match Wolf transitional, professional and contemporary products. Microwave ovens can be installed in a standard or flush inset application.

DROP DOWN DOOR MICROWAVES

TRANSITIONAL

ICBMDD30TE/S/THICBMDD30TM/S/TH

PROFESSIONAL

CONTEMPORARY

ICBMDD30PE/S/PHICBMDD30PM/S/PH

ICBMDD30CM/B/TH

ICBMDD24TE/S/TH

BU

ILT

-IN

OV

EN

S

Page 33: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 33

MICROWAVE OVENS

546 mmBEHIND FRAME

OPEN OVEN DOOR

454mm

64mm

360mm

22 mm 538 mm

446mm

WWIDTH

WIDTH W

60 cm Model 597 mm

76 cm Model 759 mm

Drop Down Door Microwave Ovens

TRANSITIONAL

PROFESSIONAL

OPEN OVEN DOOR

454mm

446mm

83mm

538 mm

360mm

22 mm

759 mm 546 mmBEHIND FRAME

CONTEMPORARY

546 mmBEHIND FRAME

OPEN OVEN DOOR

454mm

64mm

360mm

22 mm 538 mm

446mm

759 mm

BU

ILT

-IN

OV

EN

S

Page 34: DESIGN GUIDE OVENS - Sub-Zero

34 | English

MICROWAVE OVENS

Planning Information

DROP DOWN DOOR MICROWAVE

The drop down door microwave oven can be installed in a standard or flush inset application.

Finish the edges of the opening. They may be visible when the door is open.

For standard installations, face trim will overlap stiles and rails. Refer to the chart below.

For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.

INSTALLATION REQUIREMENTS

BASE SUPPORT MIN

Drop Down Door Microwave 57 kg

TRIM OVERLAP 60 cm MODEL 76 cm MODEL

Top 5 mm 5 mmBottom 0 mm 0 mmSides 18 mm 98 mm

Electrical

Installation must comply with all applicable electrical codes and be properly grounded (earthed).

Locate the electrical supply as shown in the illustrations on the following pages. The receptacle may also be located in an adjacent cabinet within reach of the power cord. Refer to the illus-tration below for minimum power cord plug clearance.

ELECTRICAL REQUIREMENTS

Electrical Supply 220-240 V AC, 50/60 Hz

Service 1600 W

Receptacle grounding-type (earthed)

BU

ILT

-IN

OV

EN

S

Page 35: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 35

MICROWAVE OVENS

Drop Down Door Microwave Oven

STANDARD INSTALLATION

E

FRONT VIEWSIDE VIEW

NOTE: Both 60 cm and 76 cm models require the same opening dimensions.Dashed line represents profile of unit.

448 mmOPENINGHEIGHT

548 mmOPENING

DEPTH

TOP VIEW

WOPENING WIDTH

OPENING WIDTH W

60 cm Model 562 mm

76 cm Model 562 mm

BU

ILT

-IN

OV

EN

S

Page 36: DESIGN GUIDE OVENS - Sub-Zero

36 | English

MICROWAVE OVENS

Drop Down Door Microwave Oven

FLUSH INSET INSTALLATION

E

WFLUSH INSET WIDTH**

FRONT VIEWSIDE VIEW

FINISHEDCLEATS*

584 mmFLUSH INSET

DEPTH25 mm

*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.

NOTE: Dashed line represents profile of unit.

460 mm FLUSH INSET

HEIGHT**

8 mm

3 mm

A

TOP VIEW

FLUSH INSET WIDTH W A

60 cm Model 603 mm 21 mm

76 cm Model 765 mm 102 mm

BU

ILT

-IN

OV

EN

S

Page 37: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 37

Warming Drawers

Wolf warming drawers are designed to take care of pre-pared foods until it’s time to serve them. You can adjust the temperature, keeping moist foods moist and crisp foods crisp. Warming drawers are ideal for proofing dough. Drawer fronts are available to match the look of Wolf ovens and sealed burner rangetops. The integrated drawer front allows for a custom panel and handle.

WARMING DRAWERS

TRANSITIONAL CONTEMPORARYPROFESSIONAL

CUSTOM PANEL

WARMING DRAWER FRONTS

M | E SERIES

INTEGRATED

BU

ILT

-IN

OV

EN

S

Page 38: DESIGN GUIDE OVENS - Sub-Zero

38 | English

578 mm

718 mm

229mm

264mm

A

BWWIDTH

546mm

OPEN DRAWER

DIMENSIONS

WARMING DRAWERS

Warming Drawers

DRAWER FRONT OPTIONS

Wolf warming drawer fronts allow for many design options, but the warming drawer itself will be the same for all appli-cations. A panel mounting kit is required when installing a custom panel. The panel mounting kit is available through an authorized Wolf dealer.

The 51 mm thick drawer front, in 76 cm and 91 cm widths, is designed to be installed below a sealed burner rangetop, so the panel aligns properly with the front of the rangetop. Dimensions for the warming drawer remain the same, even though the drawer front may be wider to match a Wolf 91 cm oven or sealed burner rangetop.

DRAWER FRONT

MODEL W

76 cm Drawer Front 759 mm91 cm Drawer Front 911 mm

M SERIES A B

Transitional | Professional 22 mm 83 mmContemporary 25 mm 86 mm

E SERIES A B

Transitional | Professional 29 mm 89 mmProfessional (51 mm thick) 54 mm 114 mmContemporary 35 mm 95 mm

INTEGRATED DRAWER FRONT

CUSTOM PANEL W H D

Typical Dimensions 759 mm 264 mm 19 mmMin Thickness 16 mm

BU

ILT

-IN

OV

EN

S

Page 39: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 39

WARMING DRAWERS

Planning Information

The warming drawer must be installed with a Wolf drawer front, avail able through an authorized Wolf dealer. Specific installation instructions are included with the drawer front.

The warming drawer can be installed in a standard or flush inset application.

For a standard installation, the drawer collar and front panel sit proud of the cabinet face frame. A recessed installation requires the cabinetry be recessed by 5 mm so the collar is flush with the cabinet face frame but the drawer front will sit proud. A flush inset installation requires the drawer collar and front panel be recessed to be flush with surrounding cabinetry. Refer to illustrations on the following pages for minimum cabinet dimensions for your specific installation.

Finish the edges of the opening. They may be visible when the drawer is open.

For standard installations, face trim will overlap stiles and rails. Refer to the chart below.

For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.

INSTALLATION REQUIREMENTS

BASE SUPPORT MIN

Warming Drawer 90 kg

TRIM OVERLAP

Top, Bottom and Sides 16 mm

ELECTRICAL

Installation must comply with all applicable electrical codes and be properly grounded (earthed). A 10A power is needed.

Locate the electrical supply flush with the back wall and within the shaded area shown in the illustrations on the following pages. For ease of installation, the electrical supply for the warming drawer can be placed in an adjacent cabinet within reach of the power cord.

ELECTRICAL REQUIREMENTSElectrical Supply 220-240 V AC, 50/60 Hz

Service 850 W

Receptacle grounding-type (earthed)

Power Cord .9 m

BU

ILT

-IN

OV

EN

S

Page 40: DESIGN GUIDE OVENS - Sub-Zero

40 | English

WARMING DRAWERS

Warming Drawer

STANDARD INSTALLATION

FRONT VIEWSIDE VIEW

TOP VIEW

NOTE: Location of electrical supply within opening may require additional cabinet depth.

584 mmOPENING

DEPTH

E

727 mmOPENING WIDTH

232 mmOPENINGHEIGHT

ANTI-TIP BLOCK

BU

ILT

-IN

OV

EN

S

Page 41: DESIGN GUIDE OVENS - Sub-Zero

subzero-wolf.com.au | 41

Warming Drawer

FLUSH INSET INSTALLATION

FRONT VIEWSIDE VIEW

TOP VIEW

*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.

NOTE: Location of electrical supply within opening may require additional cabinet depth.

610 mmFLUSH INSET

DEPTH

ADRAWERFRONTDEPTH

270 mmFLUSH INSET

HEIGHT**

765 mmFLUSH INSET WIDTH**

19 mm

19 mm

19 mm E

E

FINISHEDCLEATS*

ANTI-TIP BLOCK

WARMING DRAWERS

DRAWER FRONT DEPTH (A) M SERIES E SERIES

Transitional | Professional 22 mm 29 mm

Professional (51 mm thick) NA 54 mm

Contemporary 25 mm 35 mm

Custom front panel depth is dependent on panel thickness.

BU

ILT

-IN

OV

EN

S

Page 42: DESIGN GUIDE OVENS - Sub-Zero

Wolf Appliance International Limited Warranty

FOR RESIDENTIAL USE

FULL TWO YEAR WARRANTY*

For two years from the date of original installation, this Wolf Appliance product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Wolf Appliance under the above warranty must be performed by Wolf factory certified service, unless otherwise specified by Wolf Appliance, Inc. Service will be provided during normal business hours.

LIMITED THIRD THROUGH FIFTH YEAR WARRANTY

For five years from the date of original installation, Wolf Appliance will repair or replace the following parts that prove to be defective in materials or workmanship: gas burners (excluding appearance), electric heating elements, blower motors (ventilation hoods), electronic control boards, magnetron tubes and induction generators. The part(s) will be repaired or replaced, free of charge, with the owner paying for all other costs including labor. All service provided by Wolf Appliance under the above warranty must be performed by Wolf factory certified service, unless otherwise specified by Wolf Appliance, Inc. Service will be provided during normal business hours.

For more information regarding your Wolf product warranty, contact your authorized Wolf dealer. Warran-ties must comply to all country, state, city, local and or ordinance.

*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited60-day parts and labor warranty for cosmetic defects.

Page 43: DESIGN GUIDE OVENS - Sub-Zero

Wolf Appliance International Outdoor Limited Warranty*

FOR RESIDENTIAL USE

FULL ONE YEAR WARRANTY**

For one year from the date of original installation, this Wolf Appliance product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Wolf Appliance under the above warranty must be performed by Wolf factory certified service, unless otherwise specified by Wolf Appliance, Inc. Service will be provided during normal business hours.

LIMITED FIVE YEAR WARRANTY

For five years from the date of original installation, Wolf Appliance will repair or replace the following parts that prove to be defective in materials or workmanship: stainless steel briquette trays, gas valves, drip pans, electronic control boards and electric heating elements. If the owner uses Wolf factory certified service, the service provider will repair or replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certified service, the owner must contact Wolf Appliance, Inc. (using the information below) to receive repaired or replacement parts. Wolf Appliance will not reimburse the owner for parts purchased from non-certified service or other sources.

For more information regarding your Wolf product warranty, contact your authorized Wolf dealer. Warran-ties must comply to all country, state, city, local and or ordinance.

*Product must be approved for outdoor use, designated by model and serial number.

**Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited 60-day parts and labor warranty for cosmetic defects.

Page 44: DESIGN GUIDE OVENS - Sub-Zero

subzero-wol f .com.au