Upload
vinay-rai
View
212
Download
0
Embed Size (px)
Citation preview
7/27/2019 Design Project - Final Template
1/1
TEMPLATE DESIGN2008
www.PosterPresentations.com
Title of the Design ProjectAuthors Name, Reg. No
Guided by : Prof. Guide NameSchool of Mechanical & Building Sciences
Introduction (Font: Perpetua/44)
Introduction to the basic concepts
Applications of the design
What is the need for designing the model?
Problems associated with the current model
Brief introduction about the approach you
have planned in this model
All the above information should be addressed
in the Introduction part in the form of bulletins
Font : Perpetua; Size : 40
Methodology & Objectives
Design Calculations
Design Calculations
The proposed design should be calculated for
the imposed conditions and for the material etc.
Required formulae and the design calculations
have to be mentioned clearly and the final set
of imposed conditions may be tabulated (Fore.g.)
Initial Stress = (Formulae)
Factor of Safety = Value (Assumed)
Use this portion also for the design calculations
and the resultant information
A complete 3 D model and other views
including the exploded views of the CAD design
of the work can be pasted in this portion
If you made any iterative work on the design
improvements, that could be represented as the
design stages
Bill of materials can be provided at the end of
this portion
Based on the imposed conditions, you should conduct the analysis on theproposed model using the CAE package. The imposed conditions,
Discuss the outcomes and the inference from
the analysis. Justify whether the model has
satisfied the imposed conditions or not with the
primitive analysis
Or propose the new design with modifications
in the existing model
Learning Outcomes -
Discuss in brief on the learning outcomes of the
design project work and the knowledge gained
on the successful accomplishment of this design
project
It should be given in the bulletins
Discuss the objectives of the work in bulletin
points
For the framed objectives, mention the
proposed methodology in a step by step
mannerThe methodology should be represented in the
flow chart (For e.g.)
Literature Survey
Initial CAD design
Design calculations
Analysis
Font : Perpetua; Size : 40
Design Calculations
CAD Model
Software employed :
Analysis
Analysis
References
This soft copy of the template has been sent to the concerned faculty guide(s).
Students are required to make use of the template for completing your design
project.
Students are requested to take the color print out of the poster in A4 sheet even
though the template bears A3 format
Submission deadline of the poster format report will be on or before 30 th April 2013
If the poster doesnt follow the font regulations and the format will not be
considered for evaluation and the also marks for the final viva-voce will not be
awarded