2
Vectra-Jet 7505 THE CORPORATION Fogmaster ® 1051 SW 30 th Avenue Deerfield Beach, FL, USA 33442 Tel: 954.481.9975 Fax: 954.480.8563 e-mail: [email protected] http://www.fogmaster.com CP7505.01-0901 DESIGNED FOR SANITIZING AND DISINFECTING The Vectra-Jet™ 7505 fogger can apply a thin (or thick) layer of chemical to control undesirable microor- ganisms in clean rooms, packaging lines, storage areas, emergency vehicles, shipping containers and the like. The machine pulls chemical solution from a 1-gallon reservoir and discharges it as a fog of fine droplets. The powerful discharge carries the fog plume a distance of 25- 40 ft and creates eddies that spread it laterally. Droplet size is adjustable down to very small droplets that tend to float until they hit something. Small droplets can penetrate cracks and crevices, and reach the under- sides of furniture and equipment. However, if a room is crowded, you may have to fog from several angles to achieve full coverage. It’s always a good idea to test your treatment strategy using sample placques You can carry the Vectra-Jet by hand, place it on a table or stool, or mount it on a turntable. The Fogmaster 6100 turntable rotates at 3 rpm and helps distribute fog uniformly in larger rooms. For unattended operation, the 7505 can be controlled by a timer. Use your own, or select one of ours, including the 7304 wind-up timer (1-60 minutes); the 2238 repeat cycle timer (1-100 minutes intermittent ON and OFF cycles); and the 2239 programmable timer (7 day clock, individual fog events and intermittent ON/OFF). The Vectra-Jet uses corrosion resistant materials for wetted components: stainless steel (for fittings, valve and liquid reservoir), Viton ® tubing and Celcon ® polymer (for nozzle components). A high efficiency filter protects the air-cooled motor trapping suspended chemical droplets in the intake air. The filter element is easily replaced by unscrewing the back plate. Specifications - see over. Always read and follow instructions on the label of chemical you are using. N R T L L I S T E D E L E C T R I C A L S A F E T Y MET C US ® File # E212292

DESIGNED FOR SANITIZING AND DISINFECTING · Accessories 7505 is compatible with 6100 turntable and with all Fogmaster timers. Materials Power head housing - aluminum Tank - 304 stainless

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: DESIGNED FOR SANITIZING AND DISINFECTING · Accessories 7505 is compatible with 6100 turntable and with all Fogmaster timers. Materials Power head housing - aluminum Tank - 304 stainless

Vectra-Jet 7505

T H E

C O R P O R A T I O NFogmaster®

1051 SW 30th Avenue • Deerfield Beach, FL, USA 33442Tel: 954.481.9975 • Fax: 954.480.8563

e-mail: [email protected] • http://www.fogmaster.comCP7505.01-0901

DESIGNED FOR SANITIZINGAND DISINFECTING

The Vectra-Jet™ 7505 fogger can apply a thin (orthick) layer of chemical to control undesirable microor-ganisms in clean rooms, packaging lines, storage areas,emergency vehicles, shipping containers and the like.

The machine pulls chemical solution from a 1-gallonreservoir and discharges it as a fog of fine droplets. Thepowerful discharge carries the fog plume a distance of 25-40 ft and creates eddies that spread it laterally.

Droplet size is adjustable down to very small dropletsthat tend to float until they hit something. Small dropletscan penetrate cracks and crevices, and reach the under-sides of furniture and equipment. However, if a room iscrowded, you may have to fog from several angles toachieve full coverage. It’s always a good idea to test yourtreatment strategy using sample placques

You can carry the Vectra-Jet by hand, place it on atable or stool, or mount it on a turntable. The Fogmaster6100 turntable rotates at 3 rpm and helps distribute foguniformly in larger rooms.

For unattended operation, the 7505 can be controlledby a timer. Use your own, or select one of ours, includingthe 7304 wind-up timer (1-60 minutes); the 2238 repeatcycle timer (1-100 minutes intermittent ON and OFFcycles); and the 2239 programmable timer (7 day clock,individual fog events and intermittent ON/OFF).

The Vectra-Jet uses corrosion resistant materials forwetted components: stainless steel (for fittings, valve andliquid reservoir), Viton® tubing and Celcon® polymer (fornozzle components).

A high efficiency filter protects the air-cooled motortrapping suspended chemical droplets in the intake air.The filter element is easily replaced by unscrewing theback plate.

Specifications - see over.

Always read and follow instructionson the label of chemical you are using.

NRTL LISTEDELECTRICAL SAFETY

METC US

®

File # E212292

Page 2: DESIGNED FOR SANITIZING AND DISINFECTING · Accessories 7505 is compatible with 6100 turntable and with all Fogmaster timers. Materials Power head housing - aluminum Tank - 304 stainless

Nozzle Technology Counter-rotating vortex design. Highturbulence in the nozzle shears thefeed liquid into small droplets. This“cold” fogging technology does notrequire high heat or high pressure. Thenozzle has no small orifices and is notsusceptible to plugging.

Droplet Size, VMD Average droplet size is determined bythe liquid flow rate. Typical droplet size(volumetric mean diameter) is less than7 µ at 2 oz [60 cc] per min and about30 µ at maximum flow. Liquid surfacetension and density also affect dropletsize.

Control Valve Nine turn vernier w/ memory lock.Glass filled epoxy, type 304 stainlesssteel stem, Viton® seals.

Output Rate Maximum flow (water) is 8 oz [240 cc]per min. Flow may be higher for lowdensity or low viscosity liquids.

Chemicals The Vectra-Jet fogger can atomize bothoil-based and water-based liquids. Notcompatible with highly flammableliquids; arcing by open frame motormay cause ignition.

Fog Distance Visible fog, 35-40 ft [13 m] (Oil, fullflow condition). Fog plume may appearshorter when applying water-basedliquids because fog droplets tend toevaporate.

Motor 1 Hp, 120VAC, 8 amp [750510]; 1 Hp, 240VAC, 4 amp [750520]

EMI compatibility Compliance with CISPR 14-1:2001 andCISPR 14-2:2001 for use in sensitivelocations.

Blower Two stage balanced fan, 20,000 rpm (noload).

Intake Filter High efficiency intake filter (99.997%removal of particulates 5 µ or larger)mounts onto rear housing. Replaceabledonut style, polyester media.

Accessories 7505 is compatible with 6100 turntableand with all Fogmaster timers.

Materials Power head housing - aluminumTank - 304 stainless steelFittings - 304 stainless steelFlow control valve - see aboveTank gasket - Buna N (nitrile)Tubing - Viton polymerNozzle - Celcon. acetyl copolymer.

Liquid Capacity 1 gal [4 liters].

Dimensions LxHxDia: 12.5 x 15.4 x 8.6 in[32 x 39 x 22 cm]Dimensions include filter in position.

Shipping Weight 13 lb. [5.9 kg].

Warranty One year limited warranty.

SPECIFICATIONS – MODEL 7505