Upload
letitia-webster
View
216
Download
0
Embed Size (px)
Citation preview
Development of tritium breeder monitoring for Lead-Lithium cooled
ceramic breeder (LLCB) module of ITER
presented V.K. Kapyshevpresented V.K. Kapyshev
CBBI-16CBBI-16
Portland, Oregon, 08-10 September, 2011Portland, Oregon, 08-10 September, 2011
OUTLINE
1. Problem of Tritium Breeding Ratio (TBR) monitoring
2. Fusion Reactor Facility for Tritium Breeder Monitoring
3. R&D
Tritium Breeding Ratio (TBR) of DEMO / ITER
The most important tritium cycle parameters :
- tritium breeding ratio (TBR),- amount of tritium in the reactor,
ТВR = Qreactor / Qplasma (1)
Qreactor – tritium amount breaded in reactor blanket and plasma
Qplasma - tritium amount burned-up in plasma. Qreactor= QTBZ +QDD
Conception of TBR monitoring using Test Breeding Modules of ITER
Conception of TBR monitoring of reactor includes:
- measurements of numerator and denominator in formula (1),
- calculation booth.
Experimental definition of tritium amount burned in plasma (denominator in formula (1)) is proposed to do by measurement of
neutron number arisen in result of (D-T) reaction.
Numerator demonstrates tritium breeder in a tritium breeder zone (TBZ) of reactor blanket under neutron interaction with
lithium and beryllium isotopes
Problem of TBR Precision Measurement
TBR for the DEMO with ceramic blanket ~1.05.
Error (Δ) of TBR measurement according (1):
ΔтвR = Δrеакtоr + Δplаsmа
Δrеакtоr ~ΔTBZThe most accuracy measurements can be done in case of tritium breeder and
neutron detectors location in TBZ for short time and follow remove of its from TBZ
after plasma pulse, delivery to an analytical laboratory for analyzing.
Qreactor
Fig. 1 Conception of TBR monitoring using TBM of ITER
1- TBZ of TBM, 2- Tritium Breeding Canals (TBC) for samples, 3- casks with samples under irradiation, 4-in-put chamber, 5- transporter room, 6- tritium
laboratory
delivery of casks with samples;
extraction of irradiated casks
Fig. 2. Location of capsules with material samples in cask
This is a capsule presenting hermetic cylinder cask closed byplugs to each end.
Table 1. Content of samples in casks
№ caskTritium breeder
material
Isotope ratio (6Li / 7Li)
Absorbers of thermal neutrons
1 Li2CO3 natural –
2 Li4SiO4 natural +
3 Li4SiO4 natural –
4 Li4SiO4 ~ 1 –
5 Li4SiO4 ~ 1 +
6 Li4SiO4 ~ 10 –
“+” –yes, “-“- no
2. Pneumatic and mechanical systems of transportation
the casks to the Module
The canal (TBC) contains three parts:
- “operation” part with length ~ 0.55 m locating in TBM;
- part between TBM back plate and operation room;
- “leader” part with length ~ 0.5m for loading and unloading casks.
Transportation of the cask to the Module and back is proposed to do by two
methods: mechanical with gas cooling and pneumatic.
2.1 Initial Design of Pneumatic Tritium Breeding Canal (TBC)
The canal (TMC) for irradiation materials is thought as two coaxial pipes (Ø 14х1 mm and Ø 20х1 mm). Coolant movement
through the canal is possibly both straight and reveres.
Fig. 3. Longitudinal section of TBC
1-beryllium plug, 2-container, 3-beryllium multiplier, 4-separation elements, 5-rib of TBSM case, 6-back plate of TBM case, 7-out side of canal pipe, 8-bellow, 9-frame, 10-inner pipe of canal, 11-shield plug, 12-armored bellows, 13-heat shield, 14-biological shield, 15-fastening unit of canal,16-union, 17-adapter, 18-load chamber, 19-fingered bushing, 20-bolt, 21-transporter.
Fig. 4 Conceptual diagram of monitoring breeder tritium system with gas circulator to provide necessary temperature mode of
lithium detector operation1-channel of tritium breeder monitoring, 2-commutator of gas flow, 3-system of gas circulator, 4-pneumatic deliver system of samples to channel, 5-monitoring tritium system in CCTB, 6-pressure regulator, 7-gas cylinder, 8-heat exchanger, 9-circulator pump, 10-vacuum pump, 11-tank, 12-system of initial gas process and monitoring of tritium content in the gas, 13-system of radiation safety
TMC
TMC
Fig.11 Tritium Monitoring Canal in Ceramic-Eutectic TBM
Lradial=450mm.
Table 4 Tritium breeder in detectors of TMC placed in core of TBM’s cap
(t=3*103c) • Bk/detector detector Li-6
content• _________________________________________________________
• 9.24E+04 Eutectic 7.4%• 3.62E+06 Eutectic 50%• 3.12E+04 Eutectic 90%
• 2.60E+04 Li4 Si O4 7.4%
• 3.02E+04 Li2CO3 7.4%
R&D 1. Laboratory devices for investigation of pneumatic
systems
2. Development: - cask and capsule, - analytical methods for measurement of tritium breaded in lithium detectors under irradiation in IVV-2M nuclear reactor
3. Selection and irradiation of neutron detectors in IVV-2M nuclear reactor
4. Irradiation of the cask and capsule in IVV-2M
Development and test of Tritium Breeding Ratio (TBR) system monitoring
- laboratory facility for parameters investigation of sample deliver to TBM (pneumatic method, length=9m, T(active zone) = 200С)
• methods and analytical systems for measurement of tritium breaded in the samples (Li4SiO4, Li2CO3, tritium content~103
bq/s)
- development of nuclear reactor facility for TBR system monitoring test (T=200С, neutron flux ~ 2*1014 n/sm2, t (neutron irradiation)~10min)
Development of liquid scintillation method
Li2CO3 Dierckx’s method (1973)
ΔLi-sample = 6-7%
Li4SiO4 Verzilov’s et all method (2005)
Li4SiO4 +4HA=4LiA+SiO2↓+2H2O HA=mix(CH3COOH; HNO3)
ΔLi-sample = 10 %
Hydrogen isotope permeation through structural materials
• Laboratory facility for investigation of hydrogen permeation through structural materials (T=100-500С P(H2/D2~0,1 МПа, ferritic SS 10X9MB9,austenitic SS )
• Development of reactor experimental facility for investigation of tritium release through structural materials under reactor irradiation (T=100-500С, neutron flux ~ 1014 n/sm2)
CONCLUSION
1. Conception of tritium breeding ratio measurement and irradiation of material samples has been proposed to irradiate of the samples and to estimate tritium breeder rate in ITER TBM by experimental method under ITER normal operation.
2. Canal design is developed for irradiation of ceramic lithium, neutron detector, material samples during plasma pulse in ITER and for fast its transportation to analytical laboratory.
3. Accuracy of tritium content measurement for lithium carbonate and lithium orthosilicate is 7 % and 10%.
1. Tritium Breeding Ratio (TBR) of DEMO / ITER
The most important tritium cycle parameters :
- tritium breeding ratio (TBR),- amount of tritium in the reactor,
---------------------------------- tritium balance
- radiation safety parameters.
ТВR = Qreactor / Qplasma (1)
Qreactor – tritium amount breaded in plasma and in reactor blanket Qplasma - tritium amount burned-up in plasma.
TBR for the DEMO with ceramic blanket ~1.05. Sufficiently accuracy definition of tritium amounts
breaded in a module (numerator in (1)) isn’t really possibly by continue measurements in purge-gas system.
The most accuracy measurements can be done in case
of tritium breeder and neutron detectors location in TBZ for short time and follow remove of its from TBZ after plasma pulse, delivery to an analytical laboratory for analyzing.
Detectors can be located for one plasma pulse period
Accuracy of tritium content measurement in samples
• ΔтвR = Δrеакtоr + Δplаsmа
• Δrеакtоr = ΔTBZ + Δd,d
• (D,D) (Dd,d)
• Δd,d = Δd,t *
• (Sd,d(tplasma )/ Sd,t(tplasma))
• ΔTBZ ~ ΔLi-sample
Development and test of Tritium Breeding Ratio (TBR) monitoring
systems- Development of TBRMS for TBM
- out-pile and laboratory systems for investigation of sample deliver to TBM,
- methods and analysis systems for measurement of tritium breaded in the samples
Problem of TBR Precision Measurement
• Qreactor
Conception of TBR Monitoring