Dieter Schmid – Fine Tools · 2011. 4. 29. · Dieter Schmid – Fine Tools Catalogue 1st January 2011 Prices in this catalogue are retail prices including VAT. We reserve the right

Dieter Schmid – Fine Tools

Catalogue

1st January 2011

Prices in this catalogue are retail prices including VAT. We reservethe right to modify prices at any time.

Dieter SchmidGeorg-Wilhelm-Strasse 7 A10711 BerlinGermanyPhone: 030 342 1757Fax: 030 342 1764Email: [email protected]. DE185072605

www.fine-tools.com

1

Hand Planes

JUUMA Block PlaneThe plane's body is made of stress-relieved gray cast iron. The 3mm thick high carbon steel blade is hardened to 61 - 63 HRC. Withthe introduction of this plane we trust to have closed the large gapbetween the cheap planes and the premium planes. This plane isthe missing link regarding quality and price. with blade adjustmentwith mouth adjustmentWeight 850 g (2 lbs)Total length 163 mm (6-1/2 in.)Plane body width 44 mm (1-3/4 in.)Blade width 35 mm (1-3/8 in.)Blade thickness 3 mm (1/8 in.)Blade hardness 61 - 63 HRCCutting angle: 45° (Iron bedded at 20°)Order nr. 300030 Price € 49.00

Repl. Blade for Juuma Block PlaneOrder nr. 300031 Price € 8.90

JUUMA Smoothing Plane no. 4The plane's body is made of stress-relieved gray cast iron. The frogis made of brass. The 3 mm thick high carbon steel blade ishardened to 61 - 63 HRC and connected with a thick and stablechipbreaker. The handles are made of Bubinga. Total length 250 mm (10 in.)Width of body 62 mm (2-7/16 in.)Blade width 50.8 mm (2 in.)Blade thickness 3.2 mm (1/8 in.)Blade hardness: 61 - 63 HRCChipbreaker thickness 3 mm (1/8 in.)Iron bedded at 45°Weight 2200 g (4-1/2 lbs)Order nr. 300034 Price € 109.00

Repl. Blade for Juuma Smoothing Plane No. 4Order nr. 300035 Price € 11.90

JUUMA Jack Plane no. 5The plane's body is made of stress-relieved gray cast iron. The frogis made of brass. The 3 mm thick high carbon steel blade ishardened to 61 - 63 HRC and connected with a thick and stablechipbreaker. The handles are made of Bubinga. With theintroduction of this plane we trust to have closed the large gapbetween the cheap planes and the premium planes. This plane isthe missing link regarding quality and price. Total length 353 mm (14 in.)Width of body 62 mm (2-7/16 in.)Blade width 50.8 mm (2 in.)Blade thickness 3.2 mm (1/8 in.)Blade hardness: 61 - 63 HRCChipbreaker thickness 3 mm (1/8 in.)Iron bedded at 45°Weight 2750 g (6 lbs)Order nr. 300036 Price € 119.00

Repl. Blade for Juuma Jack Plane no. 5Order nr. 300035 Price € 11.90

JUUMA Fore Plane no. 6 (Small Jointer)The plane's body is made of stress-relieved gray cast iron. The frogis made of brass. The 3 mm thick high carbon steel blade ishardened to 61 - 63 HRC and connected with a thick and stablechipbreaker. The handles are made of Bubinga. Total length 450 mm (17-3/4 in.)Width of body 72 mm (2-7/8 in.)Blade width 60 mm (2-3/8 in.)Blade thickness 3.2 mm (1/8 in.)Blade hardness: 61 - 63 HRCChipbreaker thickness 3 mm (1/8 in.)Iron bedded at 45°Weight 3750 g (6 lbs)Order nr. 300037 Price € 129.00

Repl. Blade for Juuma Fore Plane no. 6Order nr. 300038 Price € 13.90

2

Hira KannaSmall Bench Plane with chip breaker

Hira Kanna Length: 150 mmBlade width 43 mmOrder nr. 310400 Price € 21.95

Hira Kanna Length: 180 mmBlade width 43 mmOrder nr. 310401 Price € 23.10

Bench Plane 50 mm with White Oak Bodywith chip breakerEconomy grade. The ideal plane for the beginner! Blade is beddedat an angle of 40°.Blade width: 50 mmSize of body: 235 x 62 x 34 mmOrder nr. 310438 Price € 49.90

Bench Plane 65 mm with White Oak Bodywith chip breakerEconomy grade. The ideal plane for the beginner! Blade is beddedat an angle of 40°.Blade width: 65 mmSize of body 273 x 81 x 36 mmOrder nr. 310436 Price € 59.90

Chisels

These budget priced Japanese Hikoza chisels have demonstratedvery good quality in use. They are made of unalloyed carbon steel,harder but also slightly more brittle than European chisels

HIKOZA Oire NomiJapanese chiselslaminated carbon steeldie-forged, Japanese standard chisel of good qualityHardness: 62 - 63 HRC

Blade width Order nr. Price

3 mm 309500 € 17.20

6 mm 309501 € 17.20

9 mm 309502 € 17.20

12 mm 309503 € 17.80

15 mm 309504 € 17.80

18 mm 309505 € 18.40

21 mm 309506 € 19.00

24 mm 309507 € 21.30

30 mm 309508 € 24.90

36 mm 309509 € 27.20

Set of 6 HIKOZA Chisels in canvas tool roll6, 9, 12, 18, 24, 30 mmOrder nr. 309510 Price € 99.95

3

Set of 10 HIKOZA Chisels in canvas tool roll3, 6, 9, 12, 15, 18, 21, 24, 30, 36 mmOrder nr. 309511 Price € 169.50

Japanese Saws

Dozuki "DUO" is made for ripcut and crosscut. It is the ideal dovetailsaw. Disassembled this saw is only 33 cm (13 in.) long, length withhandle 56.5 cm (22 in.)

Dozuki "DUO"Japanese Saw with backLength of blade: 240 mmWidth of blade: 50 mmThickness of blade: 0,3 mmKerf: 0.45 mmPitch: 18 TPI (1.4 mm)Total length: 56.5 mmOrder nr. 312028 Price € 29.95

Repl. blade for Dozuki "DUO"Order nr. 312029 Price € 15.45

Leather Sheath for DozukiOrder nr. 109051 Price € 4.95

Ryoba "Ecoprofi"A fast, sturdy universal saw - ideal for deep cuts both across andwith the grain - in the workshop or building site. The saw can betaken apart in one movement - great for small toolbags. Made byBAKUMA. It is not recommended to use different sizes of blades inone handle. Different blade thickness attracts different blade holder!The saw with the 300mm-blade is the best for the large pieces ofwood! The saw with blade length 250 mm is our most sold saw andthe best for general woodworking. With impulse hardened teeth! Length of blade: 250 mmThickness of blade: 0.5 mmKerf: 0.7 mmPitch: 1.4/3 mmOrder nr. 309310Price € 28.90

Repl. blade Ryoba "Ecoprofi"Order nr. 309311 Price € 18.90

Leather Sheath for RyobaOrder nr. 109053 Price € 4.95

A great saw for a very good price for all kinds of cross cuts. Thedepth of cut is not limited. The blade fits other JUUMA Katabas andmany other Kataba saws with the same blade length.

JUUMA Kataba Saw crosscutBlade length: 250 mmBlade width: 60 mmBlade thickness: 0.5 mmKerf: 0.75 mmPitch: 18 TPI (1.4 mm) Order nr. 309648 Price € 21.95

Repl. Blade crosscutOrder nr. 309649 Price € 11.95

4

A great saw for a very good price for all kinds of fine rip sawingsuch as dovetails and tenons. Not exactly as fine as a ripcut dozuki,but the depth of cut is not limited. The blade fits other JUUMAKatabas and many other Kataba saws with the same blade length.

JUUMA Kataba Saw ripcut fineBlade length: 250 mmBlade width: 60 mmBlade thickness: 0.5 mmKerf: 0.75 mmPitch: 13 TPI (1.9 mm)

Order nr. 309650 Price € 21.95

Repl. Blade ripcut fine


This Kataba is good for nearly all types of ripcut, specially for thosewho do not like to make ripcuts with the Ryoba saws, which hasteeth on both sides of the blade. The blade fits other JUUMAKatabas and many other Kataba saws with the same blade length.A coarse ripcut saw allows fast cutting!

JUUMA Kataba Saw ripcut coarseBlade length: 250 mmBlade width: 60 mmBlade thickness: 0.5 mmKerf: 0.75 mmPitch: 8.5 TPI (3 mm)


Repl. Blade ripcut coarse


For fast cutting mainly across the grain, specially for larger piecesof wood. Good results, even when the wood is fairly damp. Theideal saw for carpentry. With impulse hardened blade! (Also suitablefor the "Kariwaku" 330 mm of other brands).

BAKUMA Carpenter’s Saw "Kariwaku" Blade length: 330 mmBlade width: 55 mmBlade thickness: 0.9 mmKerf: 1.5 mmPitch: 9 TPI (2.8 mm)Order nr. 309306 Price € 28.90

Repl. Blade for Kataba 330Order nr. 309307 Price € 14.90

Leather sheath for Kataba 330 mm


Set, consisting of two Japanese Sawswith 2 single leather sheathsSet consists of a Ryoba Bakuma, blade length 8 3/8 in. (250 mm)(No. 309310), a Dozuki "Duo" for rip and cross-cuts (No. 312028),one leather sheath for Dozuki (No. 109051), and one leather sheathfor Ryoba (No. 109053). This is the ideal set to begin with, becauseall the customary cuts can be made with these saws. The cross-cutedge of the Ryoba can also be used to cut lumber-core plywoodand chipboard. Order nr. 312033 Price € 49.95

5

Set, consisting of two Japanese Sawswith large leather sheath for 3 sawsSet consists of a Ryoba Bakuma, blade length 8 3/8 in. (250 mm)(No. 309310), a Dozuki "Duo" for rip and cross-cuts (No. 312028),and a Canvas saw holder (No. 309858). This is the ideal set tobegin with, because all the customary cuts can be made with thesesaws. The cross-cut edge of the Ryoba can also be used to cutlumber-core plywood and chipboard. More... Order nr. 312030 Price € 54.95

Dozuki "Duo" short

We offer a saw for ripcut and crosscut which is very good for smalltenons. Additionally we offer the same type with crosscut blade. Theblade is exchangeable and interchangeable between both saws.Notice: A crosscut made with the crosscut blade is smoother thanwith the blade for ripcut and crosscut. Blade length: 190 mm (7-1/2 in.)Blade thickness: 0.3 mm (0.012 in.)total length: 410 mm (16 in.)Kerf: 0.45 mm (0.018 in.)Pitch: 18 TPI (1.4 mm)Comes with plastic handle

Dozuki "Duo" ShortCrosscut and RipcutOrder nr. 312036 Price € 21.95

Repl. Blade Crosscut and RipcutOrder nr. 312037 Price € 14.50

Dozuki Short CrosscutDo I need a crosscut saw when I already have a saw for both cutdirections? Usually not, but if you only need to cut across the grain,we recommend the crosscut saw, as the cut is smoother.Order nr. 312038 Price € 21.95

Repl. Blade CrosscutOrder nr. 312039 Price € 14.50

Kataba short This short Kataba saw is for cross and diagonal cuts and comeswith modern plastic handle. Blade length: 190 mm (7-1/2 in.)Blade thickness: 0.5 mm (0.02 in.)Total length: 405 mm (16 in.)Kerf: 0.7 mm (0.03 in.)pitch: 19 TPI (1.3 mm)Order nr. 312040 Price € 19.90

Repl. BladeOrder nr. 312041 Price € 12.90

This small Ryoba saw is only 39 cm (15 inches) long. The crosscutteeth are laser hardened and the blade can be exchanged.Disassembled this Ryoba is only 245 mm (9-1/2 inches) long, notlonger than the blade with tang and thus finds its place in thesmallest toolbox.

Ryoba shortBlade length 180 mmBlade thickness 0.5 mmKerv 0.8 mmPitch crosscut teeth 18 TPI (1.4 mm)Pitch ripcut teeth 8.5 TPI (3 mm)Total length 390 mmOrder nr. 312098 Price € 23.90

Replacement Blade for Ryoba shortOrder nr. 312099 Price € 15.90

6

Adjustable Depth Dozuki SawBlade length 225 mmBlade thickness 0.3 mmKerf 0.4 mmPitch 25 TPI (1 mm)Max. cutting depth approx. 48 mm The kerf is wider than the blade is thick, because the teeth are set.This helps to prevent the blade from becoming wedged in the cut.The measuring scale on the blade is printed. For a very precisedepth of cut we recommend to use a separate measure to set theblade back. This saw is manufactured by the saw smith Yoshiwaka,in Miki, Hyogo Province, Japan.

Adjustable Depth Dozuki SawOrder nr. 313500 Price € 44.50


Adjustable Depth Ryoba SawBlade length 225 mmBlade thickness 0.3 mmKerf 0.4 mmPitch crosscut 25 TPI (1 mm)Pitch ripcut 12 TPI (2 mm)Max. cutting depth approx. 48 mm This saw is manufactured by the saw smith Yoshiwaka, in Miki,Hyogo Province, Japan.

The blade on this Ryoba is much thinner than is normally possible,because the depth-adjustment bar acts as a back to reinforce theblade. Normally, a Ryoba of this size would have a blade thicknessof from 0.4 to 0.5 mm and a kerf width of between 0.6 and 0.7 mm.So compared to a standard Ryoba, this saw makes a much finercut. But because of the depth bar, one cannot make cuts deeperthan 48 mm.

Adjustable Depth Ryoba SawOrder nr. 313502 Price € 47.50


Black Dozuki "Fukazawa Shuuhou"Blade length 240 mmBlade thickness 0.3 mmKerf 0.45 mmPitch 25 TPI (1 mm)Max. cutting depth 50 mm This black Dozuki with exchangeable blade is suitable for crosscutas well as for ripcut and thus an ideal saw for fine dovetails. Madeby master blacksmith Yoshiwaka in Miki, Prov. Hyogo.Detail of black Dozuki

Black Dozuki "Fukazawa Shuuhou" Order nr. 313510 Price € 49.50


7

Very fine and clean cuts you achieve with this small Dozuki saw.Made for crosscut.

Z-SAW Dozuki Mini Blade length: 150 mmBlade thickness: 0.3 mmTotal length: 375 mmKerf: 0.49 mmPitch: 18 TPI (1.4 mm)Order nr. 313720 Price € 25.90


The Mini Fine from the same maker comes with smaller pitch andmakes a smaller kerf. Made for crosscut. The blades of both Mini Z-Saws are interchangeable.

Z-SAW Dozuki Mini FineBlade length: 150 mmBlade thickness: 0.3 mmTotal length: 375 mmKerf: 0.46 mmPitch: 25 TPI (1.0 mm)Order nr. 313722 Price € 29.90


Folding Saw NEOCUT with fine teeth for dry wood, bamboo, andpruning and grafting fruit treesThe ergonomically formed soft plastic grip allows comfortable work.The blade locks in two positions, which can ease access to tight orawkward corners. See the photo to the left - click for enlargements!Easy blade change! Made in Japan! For enlargements click picturesleft. Blade width center 33 mmblade thickness 0.8 mmKerf 0.95 mmPitch 1.75 mm (14.5 TPI)

Folding Saw NEOCUT fine Teeth Blade 210 mmOrder nr. 316300 Price € 16.50

Repl. Blade fine 210 mmOrder nr. 316301 Price € 7.50

Folding Saw NEOCUT fine Teeth Blade 240 mm Order nr. 316302 Price € 19.50

Repl. Blade fine 240 mmOrder nr. 316303 Price € 9.50

8

.

Folding Saw NEOCUT with coarse teeth for pruningNot only for pruning: if you are proposing to go into the wildernesstake this saw with you as your faithful servant! Also suitable for wetwood in carpentry! The ergonomically formed soft plastic grip allowscomfortable work. The blade locks in two positions, which can easeaccess to tight or awkward corners. See the photo to the left - clickfor enlargements! Easy blade change! Made in Japan! Forenlargements click pictures left. Blade width center 33 mmblade thickness 0.8 mmKerf 1.2 - 1.25 mmPitch 3 mm (8.5 TPI)

Folding Saw NEOCUT coarse Teeth Blade 210 mmOrder nr. 316310 Price € 17.50

Repl. Blade coarse 210 mmOrder nr. 316311 Price € 9.50

Folding Saw NEOCUT coarse Teeth Blade 240 mmOrder nr. 316312 Price € 19.50

Repl. Blade coarse 240 mmOrder nr. 316313 Price € 10.50

Keyhole Saw fineLength of blade 120 mmThickness of blade only 0.7 mmPitch 1.2 mm (21 TPI)Order nr. 312006 Price € 9.50

Keyhole Saw sturdy with Blade 180 mmThickness of blade: 1.2 mmPitch: 1.8 mm (14 TPI)Order nr. 312007 Price € 13.20

Keyhole Saw sturdy with Blade 210 mmThickness of blade: 1.2 mmPitch: 2.1 mm (12 TPI)Order nr. 312008 Price € 13.60

9

Sharpening Tools

Japanese Waterstones - both natural and synthetic - are known fortheir quick-working qualities, not only for Japanese tools, but alsofor their Western equivalents. The small particles that do the cuttingare loosely bound together in the stone, and so during sharpening,the surface particles are quickly washed out, allowing new, sharp,particles to start working on the blade. These waterstones must belubricated only with water! Never use oil!

King/SunTiger

Coarse Stone SUN TIGERGrain size: 240for grinding down notchesfor removing a lot of metalfor restoring the damaged edge of a toolfor changing the bevel on a bladeSize: 205 mm x 75 mm x 50 mmOrder nr. 309371 Price € 38.50

Sharpening Stones KINGfor general purpose sharpeningSize: 207 mm x 66 mm x 34 mm

Grain size Order nr. Price

King-Stone 800 309352 € 22.50

King-Stone 1000 309351 € 22.50

King-Stone 1200 309350 € 22.50

KING Honing Stone small Grain size: 4000fixed on plastic basefor honing - removing the burr after sharpeningSize: 176 mm x 52 mm x 15 mmOrder nr. 309359 Price € 21.90

KING Honing Stone wideGrain size: 6000fixed on plastic basefor honing - removing the burr after sharpeningSize: 210 mm x 73 mm x 22 mmOrder nr. 309356 Price € 42.90

KING Combination Stone small coarseGrain size: 250/1000for grinding down notches and general sharpening purposesSize: 205 mm x 50 mm x 25 mmThis is the ideal stone for sharpening axes and hatchets!Order nr. 309353 Price € 21.90

10

KING Combination Stone small fineGrain size: 1000/6000for sharpening an honing.Comes with plastic stone holder!Size: 185 mm x 63 mm x 25 mmOrder nr. 309366 Price € 26.90

KING Combination Stone largeGrain size: 1000/6000for sharpening and honing.The large one is recommended for use in conjunction withsharpening aids. Size: 207 mm x 66 mm x 36 mmOrder nr. 309367 Price € 42.90

KING Sculpture's Whet Stone SetGrain size 1000for sharpening carving toolsThis set consists of 2 stones: one concave, one convexe.Size concave stone: 105 mm x 65 mm x 15 mmSize convexe stone: 65 mm x 40 mm x 6 mmOrder nr. 309360 Price € 16.90

KING Sculpture's Honing Stone SetGrain size 4000for honing carving toolsThis set consists of 2 stones: one concave, one convexe.Size concave stone: 105 mm x 65 mm x 15 mmSize convexe stone: 65 mm x 40 mm x 6 mm


Cerax

CERAX Combination Stone smallGrain size: 1000/6000for sharpening an honing.Wide enough even for jointer plane blades! The 6000 grit honingside allows finest edges.This stone is very popular among knife owners who are moreexperienced in sharpening knives.Size: 182 mm x 62 mm x 27 mmOrder nr. 312073 Price € 36.50

Naniwa

NANIWA Combination Stone small coarseHomestone seriesGrain size: 120/1000for grinding down notches and general sharpening purposes. This isan ideal beginner’s stone.Size: 175 mm x 55 mm x 25 mmComes with plastic stone holder!Order nr. 313263 Price € 14.95

11

NANIWA Combination Stone smallHomestone seriesGrain size: 1000/3000for sharpening an honing. This is an ideal beginner's stone.Size: 175 mm x 55 mm x 25 mmComes with plastic stone holder!Order nr. 313264 Price € 16.95

NANIWA Coarse Stone smallHomestone seriesGrain size: 120for grinding down notcheswith plastic stone holderSize: 175 mm x 55 mm x 15 mmUsing this stone with the small Naniwa 1000/3000 stone makes fora high quality and at the same time least expensive solution forgrinding, sharpening and honing.Order nr. 313260 Price € 11.95

NANIWA Sharpening stone smallHomestone seriesGrain size: 1000for general sharpeningwith plastic stone holderSize: 175 mm x 55 mm x 15 mmOrder nr. 313261 Price € 12.95

NANIWA Honing stone smallHomestone seriesGrain size: 3000for removing the burrwith plastic stone holderSize: 175 mm x 55 mm x 15 mmOrder nr. 313262 Price € 13.95

NANIWA Super-Combination StoneGrain size: 800/5000Super Stone seriesfor sharpening and honingNow you can have the Naniwa Superstones’ quality in acombination stone. The only disadvantage to this, in common withall other combination stones, is that you have in every grit size onlyone surface to work with, and so one must resurface hollowedstones more often. Because of the slightly different working qualitiesof the Naniwa stones, the nominal grit size, 800/5000, of this stoneis more comparable to the classic 1000/6000 sharpening-honingcombination.Size: 210 mm x 70 mm x 20 mmOrder nr. 313275 Price € 59.50

NANIWA Super-Combination StoneGrain size: 3000/8000Super Stone seriesfor honing in two stepsThis is the best combination stone for honing. With no other stonecan one achieve so fine an edge.Size: 210 mm x 70 mm x 20 mmOrder nr. 313276 Price € 69.50

12

NANIWA Coarse Stone grain size: 220Super stone seriesfor grinding down notchesfor restoring dull bladesSize: 210 mm x 70 mm x 20 mmOrder nr. 313240 Price € 27.90

NANIWA Coarse Stone grain size 400Super stone seriesfor grinding down notchesfor restoring dull bladesSize: 210 mm x 70 mm x 20 mmOrder nr. 313241 Price € 29.90

NANIWA Sharpening Stone grain size 800Super stone seriesfor fast sharpeningSize: 210 mm x 70 mm x 20 mmOrder nr. 313242 Price € 32.90

NANIWA Sharpening Stone grain size 1000Super stone seriesfor general sharpening purposeSize: 210 mm x 70 mm x 20 mmOrder nr. 313243 Price € 34.90

NANIWA Sharpening Stone grain size 2000Super stone seriesfor fine sharpeningSize: 210 mm x 70 mm x 20 mmOrder nr. 313244 Price € 39.90

NANIWA Honing Stone grain size 3000Super stone seriesfor removing the burr after sharpeningor to use as step between 1000 and 6000 grit stonesSize: 210 mm x 70 mm x 20 mmOrder nr. 313245 Price € 43.90

13

NANIWA Honing Stone grain size 5000Super stone seriesZufor removing the burr after sharpeningor to use as step between 1000/2000 and 8000 grit stonesSize: 210 mm x 70 mm x 20 mmOrder nr. 313246 Price € 53.90

NANIWA Honing Stone grain size 8000Super stone seriesfor removing the burr after sharpeningand to achieve a polished bladeSize: 210 mm x 70 mm x 20 mmOrder nr. 313247 Price € 59.90

NANIWA Honing Stone grain size 10000Super stone seriesfor removing the burr after sharpeningand to achieve a polished bladereplaces a natural sword polishing stoneSize: 210 mm x 70 mm x 20 mmOrder nr. 313248 Price € 64.90

NANIWA Honing Stone grain size 12000Super stone seriesfor finest honingfor mirror polished bladesreplaces a natural sword polishing stoneSize: 210 mm x 70 mm x 20 mmOrder nr. 313249 Price € 69.90

14

Missarka (not Japanese)

Missarka Combination StoneGrit 150/500Size: 150 mm x 50 mm x 25 mmOrder nr. 300919 Price € 28,50

Whetstone Holders

Whetstone Holder made in Taiwan This Whetstone Holder will hold all sharpening stones up to a lengthof 220 mm. Width of rubber feet: 70 mm. Two rubber feet keep theholder firmly planted. The rubber blocks glide with some play. Order nr. 300024 Price € 15.90

Whetstone Holder made in Japan This Whetstone Holder will hold all sharpening stones up to a lengthof 220 mm. Width of rubber feet: 70 mm. Two rubber feet keep theholder firmly planted. Precicly machined, the rubber blocks glidewithout play, high precision threads. Order nr. 309800 Price € 26.50

Tool Storage

Canvas saw holder undyed for Japanese sawssuitable for all saws up to 330 mm blade lengthNotice: We recommend the canvas saw holders for the moreexpensive saws, even if you have to store only one saw. It simplylooks better.Saws on pictures NOT included!

Canvas saw holder undyed for 3 Japanese sawsOrder nr. 309858 Price € 9.50

Canvas Tool Roll with CordTools not included!Max. Max. diameter of handle: 35 mm (1-3/8 in.)Recommended length of tools: max. 300 mm (12 in.)

Tool Roll with 6 pocketsLength open: 45 cm (16 in.)


Tool Roll with 10 pocketsLength open: 65 cm (24 in.)Order nr. 109066 Price € 9.95

Tool Roll with 15 pocketsLength open: 90 cm (31 in.)Order nr. 109067 Price € 9.95

15

Hammer Holderfor carrying tools on belt, leather and riveted steel loopOffer valid as long as supply lasts.Order nr. 109060 Price now € 1.50

Clamping

Adjustable Corner Clamp with steel tape 7 m (23 ft) long4 Aluminium jaws on a roll of steel tape extendable to 7 m make theclamping of frames and odd-shaped bodies quite simple andsecure.Order nr. 300150 Price € 39.50

Replacement steel tape 7 m (23 ft) longOrder nr. 300151 Price € 15.50

JUUMA C-Clamps (G-clamps, C-cramps)Ductile cast iron frameCarbon steel spindle and sliding pin black

JUUMA C-Zwingen

Opening Clamping depth Order nr. Price

25 mm 25 mm 330020 € 2.25

50 mm 25 mm 330021 € 2.75

76 mm 50 mm 330023 € 3.95

102 mm 76 mm 330024 € 6.75

152 mm 88 mm 330025 € 9.95

16

Braces

Jaw Brace with plastic handlesThis jaw brace has a four-jaw chuck, which means that the bit isclamped by a very reliable mechanism with four jaws. There is anintegral ratchet to make drilling easier in confined spaces. Handlesmade of black plastic. An ideal brace for square-ended bits. Made inTaiwan. Order nr. 301185 Price € 19.90

Jaw Brace with wooden handles The wooden grips on this jaw brace add a bit of warmth and goodlooks to this quality tool. The wooden parts are not oiled or finishedin any way. We, like many other woodworkers, think this is the bestway to treat grips like this, as the wood is free to absorb sweat fromone's hands, making the tool many times more comfortable to use.If it is important that the wood not become soiled in use, then onecan finish the wood using oil or varnish, for example. Wdith four-jawchuck for square-ended bits.Made in Taiwan. Order nr. 300200 Price € 19.90

Try Squares

Graduated Steel SquareThese robust stainless steel squares are versatile tools formeasuring and marking. The blades are marked with both Imperialand metric scales in 1 mm and 1/16 in. graduations respectively.Graduations cover inside and outside measurements, so it is easyto start from the edge of a workpiece. Backside with inchgraduation.

Blade lengthOutsidegraduation

Insidegrad.

Order nr. Price

118 mm4-5/8 inch

100 mm4 inch

80 mm3 inch

300160 € 8.95

170 mm6-3/4 inch

150 mm6 inch

120 mm5 inch

300161 € 10.95

17

Tool Care

Japanese Camellia Oil (Hamono Tsubaki)This highly refined "Kurobara" (black rose) brand Camellia oil, hasbeen produced from the same recipe for more than 80 years inJapan. Traditionally it is used to protect hand saw blades, swords,knives, plane irons, chisels and many other metal objects fromcorrosion. It can also be used as sewing machine oil! KurobaraCamellia oil is acid free and very pure. It has a neutral taste, isodorless, doesn't dry and is not poisonous, so it is highlyrecommended for protecting kitchen knives. It should howevernever be used as cooking oil! Camellia Oil in Plastic Bottle: 100 mlOrder nr. 310580 Price € 5.95

Applicator for Camellia Oil - Abura TsuboEasy and clean way to protect your tools!Takes max. 30 mlComes without oil!Order nr.: 310582 Price € 10.50

18

Documents

Dieter Schmid – Fine Tools · 2011. 4. 29. · Dieter Schmid – Fine Tools Catalogue 1st January 2011 Prices in this catalogue are retail prices including VAT. We reserve the right