KDL-19M4000

3-297-702-11(1) Making Audio/Video ConnectionsYour new TV includes various types of video inputs and two types of audio jacks; RCA type and digital audio (optical). Use the outputs/inputs that are available on your components that provide the best audio/video performances:

Connector typeBest Audio/Video

Performance

Connector typeDIGITAL

AUDIO OUT(OPTICAL)

Digital Audio Out(Optical)

HDMI (High-Definition Multimedia Interface)

Analog Audio Component video

S VIDEO

Composite video

The connection diagrams shown below and on the reverse side are recommendations only; other possible solutions may exist. Connections that include an AV receiver can often be complex, so check your AV receiver’s instruction manual for additional details.

See the “Cables Required” chart that appears with the diagram to determine which cables you’ll need. Depending on the components you plan to connect, you may need to purchase extra cables.

~

~

For Your ConveniencePlease contact Sony directly if you have questions on the use of your television after reading your Quick Setup Guide and Operating Instruction Manual.

Contact Sony Customer Support at:

http://www.sony.com/tvsupport

Or to speak with a support representative:

United States1-800-222-SONY (7669)

Canada1-877-899-SONY (7669)

Please Do Not Return the Product to the Store

©2008 Sony Corporation Printed in China

Quick Setup GuideFor further information, see the Operating Instruction Manual supplied with the TV.Please retain this guide for your future reference.

RGB

AUDIO

AUDIO

AUDIOIN

PC ININ

L(MONO)

VIDEOIN 1

SERVICEONLY

Y

PB

PR

L

R

(1080i/720p/480p/480i)

AUDIO

AUDIO OUT

COMPONENT IN

DIGITAL AUDIO OUT(OPTICAL)

CABLE/ANTENNA

Rear of TV

DVD Player

VCR

Splitter

Cable

PC

Use this diagram if you have;

VCR PlayerDVD PC

RGB

AUDIO

AUDIO

AUDIOIN

PC ININ

L(MONO)

VIDEOIN 1

SERVICEONLY

Y

PB

PR

L

R

(1080i/720p/480p/480i)

AUDIO

AUDIO OUT

COMPONENT IN

DIGITAL AUDIO OUT(OPTICAL)

Rear and Left Side of TV

VID

EO

2 IN

S

VID

EO

VIDE

OL

(MO

NO)

RAU

DIO

CABLE/ANTENNA

VCR

Cable Box orSatellite Receiver

Splitter

Cable

PC

A / V

DVD Player

Cables RequiredSplitter 1Coaxial 4Composite 2Component 1Audio 3

HD15-HD15 1Optical Audio 1

A Cables Required

Splitter 1

Coaxial 3

Composite 1

Component 1

Audio 2

HD15-HD15 1

Use this diagram if you have;

Cable Box VCR PlayerDVD PC AV Receiver

orSatellite Receiver

B

If your DVD player has an HDMI jack, use that instead of the video connections shown here.

If your DVD player or satellite receiver has an HDMI jack, use that instead of the video connections shown here.

If you are not using a cable box or satellite receiver, connect your cable to the VCR’s RF IN jack.

Upgrade your signal to high-definition programming to view the same picture quality at home as you’ve seen in the store. Contact your cable or satellite provider for upgrading to high-definition TV for stunning detail and richer sound.

Please select your language

Initial Setup

English

Español

Français

Initial Setup

First please connect cable or antenna.Allow 50+ minutes for completion.Start auto program now?

OK Cancel

Continued

Initial Setup

Analog Channels Found: 0Digital Channels Found: 0

Please wait. Allow 50+ minutes for completion.Press to cancel.

Cancel

Searching...

Initial Setup

If you want to use air signals, please connect antenna.Allow 50+ minutes for completion.

OK Cancel

Running Initial Setup

1 Select the language for the OSD (on screen display).

2 Connect either cable or antenna to your TV(you can connect both using an A-B RF switch). If you connect cable, the TV will scan cable channels. A�er this scanning, you can search antenna channels as well.

If you have cable and antenna connection available, please connect cable first. If you are not using the VHF/UHF CABLE connection to TV, you can cancel the Auto Program by selecting Cancel.

3 Your TV will detect the type of signal connected and will start scanning for the channels.

4 If the Initial Setup programming found cable channels, you will be able to scan antenna channels as well. Connect the antenna (using an A-B RF switch, not supplied) and change the switch to antenna, then start Auto Program to search antenna channels.

~

~

KDL-19M4000 EN 3-297-702-11(1)

RGB

AUDIO

AUDIO

AUDIOIN

PC ININ

L(MONO)

VIDEOIN 1

SERVICEONLY

Y

PB

PR

L

R

(1080i/720p/480p/480i)

AUDIO

AUDIO OUT

COMPONENT IN

DIGITAL AUDIO OUT(OPTICAL)

Rear and Left Side of TV

VID

EO

2 IN

S

VID

EO

VIDE

OL

(MO

NO)

RAU

DIO

CABLE/ANTENNA

Cable Box

DVD Player

SatelliteReceiver

VCR

Splitter

Cable

SatelliteAntennaCable

Use this diagram if you have;

Cable Box VCR PlayerDVD Satellite Receiver

RGB

AUDIO

AUDIO

AUDIOIN

PC ININ

L(MONO)

VIDEOIN 1

SERVICEONLY

Y

PB

PR

L

R

(1080i/720p/480p/480i)

AUDIO

AUDIO OUT

COMPONENT IN

DIGITAL AUDIO OUT(OPTICAL)

Rear of TV

CABLE/ANTENNA

A / V

Splitter

Cable

Digital Recorder

DVD Player

HD Cable Box orHD Satellite Receiver

CUse this diagram if you have; HD Cable Box Player

DVD AV Receiver Digital Recorder

or

HD Sat Receiver

D

If you are not using a cable box, connect your cable to the VCR’s RF IN jack.

If your DVD player or satellite receiver has an HDMI jack, use that instead of the component/composite video connections.

Cables Required

Splitter 1

Coaxial 5

Composite 3

Component 1

Audio 1

HDMI 1

Cables RequiredSplitter 1Coaxial 4Composite 1Component 1Audio 1HDMI 1Optical Audio 4

RGB

AUDIO

AUDIO

AUDIOIN

PC ININ

L(MONO)

VIDEOIN 1

SERVICEONLY

Y

PB

PR

L

R

(1080i/720p/480p/480i)

AUDIO

AUDIO OUT

COMPONENT IN

DIGITAL AUDIO OUT(OPTICAL)

Rear of TV

CABLE/ANTENNA

VCR

DVD PlayerHD Cable Box orHD Satellite Receiver or HD DVR

Cable

TerrestrialAntenna

Use this diagram if you have;

HD Cable Box VCR PlayerDVD

or

HD Sat Receiver or HD DVR

RGB

AUDIO

AUDIO

AUDIOIN

PC ININ

L(MONO)

VIDEOIN 1

SERVICEONLY

Y

PB

PR

L

R

(1080i/720p/480p/480i)

AUDIO

AUDIO OUT

COMPONENT IN

DIGITAL AUDIO OUT(OPTICAL)

Rear and Left Side of TV

VID

EO

2 IN

S

VID

EO

VIDE

OL

(MO

NO)

RAU

DIO

CABLE/ANTENNA

VCR

Cable Box orSatellite Receiver

/C

Sony DreamSystem

Splitter

Cable

EUse this diagram if you have;

Cable Box VCRSony

Dream System

or

Satellite Receiver

F

For best results, check the cable box’s manual for proper setup of the HD output.

If your HD cable box and DVD player have HDMI jacks, use HDMI with the HD cable box and component video with the DVD player (as shown). This will give you the best possible picture quality.

Cables Required

Coaxial 2

Composite 2

Component 1

Audio 2

HDMI 1

If you are not using a cable box or satellite receiver, connect the cable to the VCR’s RF IN jack.

Cables Required

Splitter 1

Coaxial 4

Composite 2

Component 1

Optical Audio 1

Audio cables must be connected for sound when DVI connector is used.