Embed Size (px)
Citation preview
DILLINGER HÜTTE GTS
HEAVY STEEL PLATE FROM STOCK
THE SUPPLY CAPABILITIES OF DILLINGER HÜTTE GROUP’S STEEL SERVICE CENTRES
DiIlinger Hütte GTS is Europe’s leading heavy plate producer, and possesses an annual production capacity of some 2.3 million tonnes. The company is the reliable producer of high-quality heavy plate for an extremely broad and diverse range of applications. Among many other fields, DiIlinger Hütte GTS serves the offshore industry, the pressure vessel sector, heavy machinery fabricators and construction equipment OEMs.
DiIlinger Hütte GTS supplies an exceptionally wide range of dimensions, including extremely thick and extremely wide plates. The company has the flexible capability to implement customers‘ individual specifications, in order to make its special contribution to assuring the optimum solution both for unique projects and continuous series production. Its two rolling mills routinely process up to 5,000 grades as specified in steel standards and/or specially tailored to customers’ specifications. Dillinger Hütte GTS has the necessary infrastructure to supply customers ex works from a batch size of 4.5 t, up to and including large-scale projects.
Not only ex mill, but also ex stock, to assure fast delivery:DiIlinger Hütte GTS Steel Service Centres can be found, among others, in Ger - many, the Netherlands, France and the UAE (www.dillingermiddleeast.com), and hold stocks totalling more than 100,000 t of heavy plate. Only the capabilities available from the European Steel Service Centres (Ancofer Stahlhandel, Jebens and AncoferWaldram Steelplates) are highlighted below.
The stocks operated by Ancofer Stahlhandel, Jebens and AncoferWaldram Steelplates supply an impressively wide range of grades:
n Not just standard plate, but also special grades for offshore applications, pressure vessel fabrication, structural steel engineering and heavy machinery.
n Not only in standard dimensions but also in plate thicknesses up to above 400 mm and plate width of 4,000 mm and more.
The following information spotlights special heavy plate products produced by Dillinger Hütte GTS and available from stock.
AG der Dillinger Hüttenwerke, P.O. Box 1580, D-66748 Dillingen/Saar, Germany Tel.: +49 6831 47 0 Fax: +49 6831 47 22 12, E-Mail: [email protected], www.dillinger.de
Ancofer Stahlhandel GmbH, Rheinstraße 163, D-45478 Mülheim an der Ruhr, Germany Tel.: +49 208 5802 0, Fax: +49 208 5802 259, E-Mail: [email protected] , www.ancofer.de
Steel Service Centres
Ancofer Stahlhandel 90 %
Jebens 100 %
AncoferWaldram Steelplates 100 %
other SSCs
Dillinger Hütte GTS
DILLINGER HÜTTE GTS
Ancofer Stahlhandel, located in Mülheim an der Ruhr, Germany, has been a member of the Dillinger Hütte group since 1997.
Ancofer Stahlhandel’s function is to assure the rapid availability of a wide range of heavy steel plates from stock, plus fl ame-cut components. The company stores
a large range of plates, including structural and pressure vessel steels in plate widths up to 4,000 mm at its ten warehouses with their 21,800 m² of storage space. A large selection of additional services is also available.
Ancofer is universally acclaimed as a specialist in heavy plate, and supplies a large range of steels in diverse dimensions – not only standard steel products, but also plate thicknesses up to 250 mm, lengths up to 20,000 mm and widths up to 4,000 mm.
The Ancofer fl ame-cutting shop is one of Germany’s largest, most experienced and most productive. Decades of know-how, highly trained and capable staff , plus modern equipment, assure perfect results and optimum delivery times.
View the complete Ancofer range at: http://www.ancofer.de
Ancofer Stahlhandel GmbH, Rheinstraße 163, D-45478 Mülheim an der Ruhr, GermanyTel.: +49 208 5802 0, Fax: +49 208 5802 259, E-Mail: [email protected] , www.ancofer.de
Jebens GmbH, Daimlerstraße 35-37, D-70825 Korntal-Münchingen, GermanyTel.: +49 711 8002 0, Fax: +49 711 8002 100
E-Mail: [email protected], www.jebens.de
Jebens, located in Korntal-Münchingen, near Stuttgart, Germany, has been part of the Dillinger Hütte group since 1990. Jebens is dedicated to supplying thick and heavy plates and profiled slabs, heavy machined oxy-cut parts, and fully prefabricated, welded and painted steel components.
Jebens stocks a large range of ultra-thick structural steel plates and profiled slabs produced by Dillinger Hütte GTS. Examples:
The company‘s all-round production capabilities at least seven different sectors make it a highly popular solutions partner for plates and other items up to 55 t in weight. These elements are precision flame-cut to the dimensions necessary in this sector. Thicknesses ranging from 8 to 650 mm, widths up to 4,000 mm and lengths up to 20,000 mm permit highly efficient production of components with the minimum number of individual parts, minimising the need for welding.
A wide range of fabrication options make Jebens your “one-stop” steel provider. From support at the design stage, via cutting, chamfering of highly complex geometries, drilling, milling, annealing and normalising, up to and including sandblasting and painting, this specialist in demanding tasks produces all-in, ready-to-install welded components.
View the complete Jebens range at http://www.jebens.de
Jebens GmbH, Daimlerstraße 35-37, D-70825 Korntal-Münchingen, Germany Tel.: +49 711 8002 0, Fax: +49 711 8002 100
E-Mail: [email protected], www.jebens.de
Ancofer Waldram Steelplates bv, P.O. Box 190, NL-4900 AD Oosterhout, The Netherlands Tel.: +31 162 49 15 00, E-Mail: [email protected], www.ancoferwaldram.nl
Grade Designation Standard Thickness WidthConstruction steelS355J2+N
Structural steel EN 10025-2 up to 410 mmup to 4,000 mm
S355K2+N up to 3,500 mmC45 8 - 250 mm42CrMo4 20 - 200 mmProfiled slabsin accordance with chemical composition for S235 to S355
up to 650 mm
AncoferWaldram Steelplates has been a specialist supplier of heavy carbon steel plates and profiled parts for more than thirty-five years.
Its combination of comprehen-sive stocks of more than 35,000 t of heavy carbon steel plates, combined with its sophis ticated
profiling equipment, give Ancofer Waldram Steelplates the decisive lead in experience, product range and customer service.
AncoferWaldram Steelplates holds a large stock of plates for offshore and marine applications, and also structural, pressure vessel and other grades. With its workforce of 90 employees, AncoferWaldram Steelplates supplies a broad international customer base in the fields of offshore fabrication, steel and crane engineering, boiler and pressure vessel equipment, heavy machinery, yellow goods, dredging and shipbuilding.
View the complete AncoferWaldram Steelplates range at: http://www.ancoferwaldram.nl
Ancofer Waldram Steelplates bv, P.O. Box 190, NL-4900 AD Oosterhout, The Netherlands Tel.: +31 162 49 15 00, E-Mail: [email protected], www.ancoferwaldram.nl
© Huisman Equipment B.V. © Mammoet Holding B.V.
The following chart shows the Dillinger Hütte GTS range for the various supply conditions:
N = normalisedAR = as rolledTM = thermomechanically rolledQ = quenchedA = annealed
Please enquire for plate formats not expressly featured in the published range.
Find your local sales contact at: http://www.dillinger.de/dh/kontakt/weltweit/index.shtml.en
4800
52005000
10001200
1600
2000
2400
2800
3200
3600
4000
4400
1400
1800
2200
4200
4600
3000
3400
3800
2600
6 8 12 20 40 60 80 100 140 180 220 260 300 340 380 4105 7 10 15 30 50 70 90 120 160 200 240 280 320 360 400
TM
N, AR
N, ARQ, Q + A
Plat
e w
idth
in m
m
Plate thickness in mm
AG der Dillinger Hüttenwerke, P.O. Box 1580, D-66748 Dillingen/Saar, GermanyTel.: +49 6831 47 0 Fax: +49 6831 47 22 12, E-Mail: [email protected], www.dillinger.de
Max. plate length: 28 m
Max. plate w
eight: approx. 52 tDILLINGER HÜTTE GTS
Jebens GmbH, Daimlerstraße 35-37, D-70825 Korntal-Münchingen, GermanyTel.: +49 711 8002 0, Fax: +49 711 8002 100
E-Mail: [email protected], www.jebens.de
Strategically located between the major international ports of Rotterdam and Antwerp, AncoferWaldram Steelplates holds a large and varied stock of special grades from the Dillinger Hütte GTS range.
An impressively wide selection of steel plates for off shore and marine applications, pressure vessel and structural steel engineering, plus the DILLIMAX high-tensile and DILLIDUR wear-resistant plate grades, is available.
View the complete AncoferWaldram Steelplates range at: http://www.ancoferwaldram.nl
AncoferWaldram Steelplates not only supplies heavy steel plate in all commercial stock dimensions, it also operates its own modern fl ame-cutting facilities.
Grade Designation Standard Thickness WidthPressure vesselP355NL2SA516 Grade 70
Normalised fi ne grained steel
EN 10028-3/ASTM A516M
up to 220 mmup to 3,000 mmDICREST®5
SA516 Grade 60/65/70
Hydrogen induced cracking (HIC) resistant plates
ASTM A516M 8 to 100 mm
Construction steelS355J2+NS355K2+N
Structural steel EN 10025-2 up to 300 mmup to 3,000 mm
S355NLNormalised fi ne grained steel
EN 10025-3 up to 200 mmup to 3,500 mm
S355M/ML Thermomechanically rolled fi ne grained steel EN 10025-4
8 to 100 mm up to 3,050 mmS460M/ML 10 to 100 mm
Steel for marine applicationsStructural steel DNV: NV D36 and NV E36 DNV rules 6 to 100 mm
up to 3,500 mmLRS: Grade A, DH36
and EH36Lloyd’s rules 6 to 150 mm
Off shoreS355G8/10+M
Off shore grades
EN 10225NORSOK M120 /Y20
8 to 100 mm
up to 3,050 mm
S355G8/10+N 110 to 150 mm
S460G2+MS420G2+M
NORSOK M120 /Y40
10 to 100 mm
API 2W Grade 50 API 2W 8 to 100 mmHigh-strength steel
DILLIMAX 690 T/ES690 with Charpy at -40 °C / -60 °C
EN 10025-6 8 to 250 mmup to 3,000 mm
Wear-resistant steel
DILLIDUR IMPACT 340 HB grade with high impact toughness at -40 °C
–
50 to 150 mmup to 2,500 mm
DILLIDUR 400 V Water quenched 400 HB 8 to 150 mmup to 3,000 mm
DILLIDUR 450 V Water quenched 450 HB8 to 100 mm
DILLIDUR 500 V Water quenched 500 HB
Ancofer Waldram Steelplates bv, P.O. Box 190, NL-4900 AD Oosterhout, The NetherlandsTel.: +31 162 49 15 00, E-Mail: [email protected], www.ancoferwaldram.nl
Max. plate length: 28 m
Max. plate w
eight: approx. 52 t
The following table shows the wide range of processing capabilities available at Jebens:
Plus: n Welding of fine grained structural steelsn Build-up welding / plating of cast steeln Manufacturing qualification in conformity to the DIN 18800-7 Class E
standard, extended to include S960; EN 1090 for welded componentsn Certification in accordance with the DIN EN 729-2:1994 and
ISO 3834-2:2005 standards (’’Higher Welding Certificate“)
View the complete Jebens range at: http://www.jebens.de
Ancofer Stahlhandel GmbH, Rheinstraße 163, D-45478 Mülheim an der Ruhr, Germany Tel.: +49 208 5802 0, Fax: +49 208 5802 259, E-Mail: [email protected] , www.ancofer.de
Jebens GmbH, Daimlerstraße 35-37, D-70825 Korntal-Münchingen, Germany Tel.: +49 711 8002 0, Fax: +49 711 8002 100
E-Mail: [email protected], www.jebens.de
Thermal cutting14 thermal cutting machines Plasma-cutting, oxy-cutting
Thickness range 8 – 650 mmWidth up to 5,000 mmLength up to 20,000 mmMax. item weight 55 t
ChamferingChamfering robots + CNC chamfering
Individual true-contour chamfering and cutting in multiple layers
Thickness range 8 - 500 mmWidth up to 2,200 mmLength up to 8,500 mmMax. item weight 20 t
Straightening
2 straightening pressesto DIN specifications to customer specifications pressure
3,500 kN
Flame straighteningControlled straightening of thick plates
Heat treatmentFurnace Stress-relieving annealing normalising
Width 3,500 mmLength 10,500 mmHeight 2,500 mmMax. charge weight 40 t
Surface treatmentContinuous type shot blasting machine
Width up to 2,700 mmManual blasting booth Max. filling weight 40 tMobile blasting system2 painting booths Applying both solvent- and water-based paints
Width 5,000 mmLength 9,000 mmHeight 2,500 mmMax. item weight 40 t
MachiningCNC machining centre for milling and drilling
Max. X axis 16,000 mmMax. Y axis 3,700 mmMax. Z axis 2,500 mmMax. item weight 100 t
WeldingMIG / MAG / submerged arc welding facilitiesWelding tilt and turn table Max. item weight 50 t
Ancofer Waldram Steelplates bv, P.O. Box 190, NL-4900 AD Oosterhout, The Netherlands Tel.: +31 162 49 15 00, E-Mail: [email protected], www.ancoferwaldram.nl
Ancofer Stahlhandel GmbH, Rheinstraße 163, D-45478 Mülheim an der Ruhr, Germany Tel.: +49 208 5802 0, Fax: +49 208 5802 259, E-Mail: [email protected] , www.ancofer.de
A selection of the special grades available for pressure vessels, structural steel and offshore engineering, plus the DILLIMAX high-tensile and DILLIDUR wear-resistant plate grades, is shown below:
n Mechanical and technological tests, including ultrasonic inspection, Charpy impact test, bead bending test and Z-value (through-thickness tensile properties) test.
n Semi-fabrication, including bevelling, levelling and sandblasting in conformity to SA 2.5 in Ancofer‘s own blasting shop; protective treatment, drilling, turning, milling, edge preparation.
n Ancofer is certificated in conformity to DIN EN ISO 9001:2008
n Ancofer is certificated in conformity to EN 1090 for oxy-cut parts for steel structures.
Ancofer has the following fabrication facilities:
n 1 blasting shopn 2 bandsawsn 6 oxy-cutting machinesn 1 plasma-cutting machinen 1 levelling machinen 2 robots for weld preparation View the complete Ancofer range at: http://www.ancofer.de
Grade Designation Standard Thickness WidthPressure vessel steelP355NL2 Normalised fine
grained steel EN 10028-3
up to 250 mm up to 4,000 mmSA516 Grade 70 ASTM A516MConstruction steelS355J2+N Structural steel EN 10025-2 up to 200 mm
up to 4,000 mmS355NL
Normalised fine grained steel
EN 10025-3 up to 250 mm
S355M/ML Thermomechanically rolled fine grained steel
EN 10025-4 10 to 100 mmup to 4,050 mm
S460M/ML up to 3,050 mm
Offshore
S355G8/10+M Offshore gradesEN 10225 NORSOK M120/Y20
10 to 100 mm up to 4,050 mm
High strength steelDILLIMAX 690 E S690QL/QL1
S690 with Charpy at -60 °C
EN 10025-6 6 to 250 mm up to 3,000 mm
Wear resistant steelDILLIDUR 325 L Air hardened 325 HB
–
8 to 100 mm up to 2,000 mm
DILLIDUR 400 V Water quenched 400 HB
8 to 150 mm
up to 3,000 mmDILLIDUR 450 VWater quenched 450 HB
8 to 100 mmDILLIDUR 500 V
Water quenched 500 HB
Imprint
AG der Dillinger HüttenwerkeP.O. Box 158066748 Dillingen/SaarGermany
Tel.: +49 6831 47 0Fax: +49 6831 47 22 12E-Mail: [email protected]
AG der Dillinger Hüttenwerke, P.O. Box 1580, D-66748 Dillingen/Saar, Germany Tel.: +49 6831 47 0 Fax: +49 6831 47 22 12, E-Mail: [email protected], www.dillinger.de
DILLINGER HÜTTE GTS
