Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
®
DIRECT CURRENT MOTORS
Technical Catalogue
November
2017
web edition
1IE/INDEX/02-2013
Index
DC motors
Description Type Page
Introducion 2
12V DC - 0.35 kW - D.80 25021400 4
24V DC - 0.4 kW - D.80 25021500 6
12V DC - 0.5 kW - D.80 25024200 8
24V DC - 0.5 kW - D.80 25024300 10
12V DC - 0.7 kW - D.80 25021600 12
24V DC - 0.8 kW - D.80 25021700 14
12V DC - 0.8 kW - D.80 25021800 16
24V DC - 0.8 kW - D.80 25021900 18
12V DC - 1.6 kW - D.115 25021100 20
24V DC - 2.2 kW - D.115 25021200 22
12V DC - 1.5 kW - D.115 25022200 24
12V DC - 1.5 kW - D.115 25022200 FAN 26
24V DC - 2.0 kW - D.115 25022300 28
24V DC - 2.0 kW - D.115 25022300 FAN 30
12V DC - 1.6 kW - D.115 25022000 32
24V DC - 2.2 kW - D.115 25022100 34
12V DC - 1,6 kW - D.115 25022600 36
24V DC - 2,2 kW - D.115 25022700 38
24V DC - 3.0 kW - D.125 25021300 40
24V DC - 3.0 kW - D.125 25021300 FAN 42
24V DC - 3.0 kW - D.125 25022400 44
24V DC - 3.0 kW - D.125 25022400 FAN 46
Starting switch 120A 48
Starting switch 150A 48
© 2017 Dana Brevini Fluid Power S.p.A. all rights reserved. Hydr-App, SAM Hydraulik, Aron, Brevini Hydraulics, BPE Electronics, VPS Brevini, OT Oiltechnology, logos are trademarks or are registered trademarks of Dana Brevini Fluid Power S.p.A. or other companies Dana in Italy and other countries.
The technical features supplied in this catalogue are non binding and no legal action can be taken against such material. Dana Brevini Fluid Power will not be held responsible for information and specifications which may lead to error or incorrect interpretations. Given the continuous technical research aimed at improved technical features of our products, Dana Brevini Fluid Power reserves the right to make change that are considered appropriate without any prior notice. This catalogue cannot be reproduced (in while or in part) without the prior written consent of Dana Brevini Fluid Power. This catalogue supersedes all previous ones.
Use of the products in this catalogue must comply with the operating limits given in the technical specifications. The type of application and operating condi-tions must be assessed as normal or in malfunction in order to avoid endangering the safety of people and/or items.
®
2IE/INTRO/02-2017
A2+
M
A1- D1E1+
M
A2E2- D1E1+
M
A2E2-
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
24
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78
60
4843
38
32
2622
2017
1512
63
10 l/min
IntroductionThis collection of technical tables lists all the DC motors approved by Dana Brevini Fluid Power and used in power units of its standard production. Dana Brevini Fluid Power offers a wide range of DC motors with rated voltage from 12 V to 24 V and power from 350 W to 3000 W. The diagrams shown are de-termined from tests performed with the characteristics specified in the same technical tables” and using the standard power units manufactured by Dana Brevini Fluid Power.The curves thus show the performances of the power unit in relation to the pump installed. One table describes the main characteristics of the pumps specifying their size (group)
Motor typologyThe two main types of DC motors used by Dana Brevini Fluid Power are: • With permanent magnets, generally low power motors, reversible, in
which the magnetic field is generated by permanet magnets and excita-tion is constant;
• With wound fields: generally medium power, unidirectional, where both excitation and armature windings are electrically driven. These are then divided into two other families: series coonection and compound.
Duty cycleIn order to ensure the correct choice of the motor, must be known the type of duty cycle required by the application and it has to be compared with the motor features.Duty types S1, S2, S3 are defined according to standards EN 60034-1, cor-responding to CEI 2-3.
DefinitionsDuty typeA continuous, short time or periodic duty, comprising one or more loads re-maining constant for the duration specified, or a non-periodic duty in which generally load and speed vary within the permissible operating range.
Thermal equilibriumThe state reached when the temperature rises of the several parts of the machine do not vary by more than 2°C over a period of 1 h.
Cyclic duration factorThe ratio between the period of loading, including starting and electric brak-ing, and the duration of the duty cycle, expressed as a percentage.
Continuous running duty – Duty type S1Operation at constant load of sufficient duration for thermal equilibrium to be reached.
Short time duty – Duty type S2Operation at constant load during a given time, less than that required to reach thermal equilibrium, followed by a rest and de-energized period of suf-ficient duration to re-establish initial conditions
Intermittent periodic duty – Duty type S3A sequence of identical duty cycles, each including a period of operation at constant load and a rest and de-energized period. The duration of a cycle is generally 10 min. The value S3 is expressed as a percentage For example S3= 25% means that the load on the motor can be constant for 25% of cycle time (2.5 minutes); then you need a rest position for the remaining 75 % of cycle time (7.5 minutes) before starting over a new cycle.
Protection degreeThe degree of protection is indicated in accordance with standard EN 60034-5 corresponding to CEI 2-16. The codes to indicate degree of protection are made by the letters IP followed by two characteristics numerals.
The protection degree are valid in many cases only for motors assembled on power units or other products manufactured by Dana Brevini Fluid Power.
Insulation classThe insulation class indicated is in accordance with standard EN correspond-ing to CEI 15-26. It indicates the maximum appropriate temperature for the product in nominal operating conditions, without damages to the insulating material of the motor.
Insulation class Y A E B F H
Temperature (°C) 90 105 120 130 155 180
How to choice the motorEach motor has its own characteristic curve. The main specifications are: flow rate (in l/min or US gpm), pressure (in bar or psi), current (in Ampere) and duty type S2 (in minutes) or S3 (in percentage of working time).
Reference data • Maximum nominal pressure Pmax = 290 Bar (4206 psi)• Oil ISO VG32 at temperature 35°C (viscosity 40 cSt)• Outside temperature 25°C• Maximum nominal current Imax = 300A • Constant stabilized voltage detected at the terminals of the electric motor.
As a function of pressure and pump displacement, determines the flow rate, drawing a vertical line from the pressure value, intercepting the curve relat-ing the pump, in fact you can read the flow rate on the ordinate. For example: pressure 100 bar (1450 psi), pump 3.8 cm³/rev (0.23 in³/rev), you have a flow rate of 10 l/min (2.6 US gpm).
Permanent magnets
Wound fieldsSeries Compound
Reversible (nominal left)
Unidirectional left
Unidirectional left
®
3IE/INTRO/02-2017
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32 26 22 20
17
15
12
63
217 A
S2
S3
0 0
2 4
4 8
6 12
8 16
10 20
12 24
14 28
16 32
18 36
20 40
S2 (min) S3 (%)
Amp30 40 50 60 70 80 90 100 110 120 130 140 150 160 180 200 220 240 260 280
1.55 min
5.1 %
Introduction
Start switchSwitch ON/OFF
Thermal switch(optional)
Battery
Similarly you can read the value of current absorption in the related diagram. With the same data of the previous example you have a current consumption of 217 A.
Taking again the current consumption on the S2-S3 diagram, you have a S2 duty equal to 1.55 ( 1’32’’) minutes and a S3 duty equal to 5.1 % (30 s on a cycle of 10 minutes).
Example of installationThe following i san example of electrical connection
All electrical connections and disconnections must be performed by trained, specialized personnel.
When wiring a motor, it is important to consider the cross-sectional area and length of the power cables. Cables with overly small cross-sections and overly long lengths may cause voltage drops that could prevent the PU from operating properly.
ISO M8 5 ÷ 7 Nm [3.69 ÷ 5.16 lbf · ft]
ISO M6 3 ÷ 5 Nm [2.21 ÷ 3.69 lbf · ft]
5/16-18 UNC-2A 5 ÷ 7 Nm [3.69 ÷ 5.16 lbf · ft]
Quantity Unit Symbol Other units Symbol Equivalence Reverse Equivalence
Flow rate Liters at minutes l/minUS Gallon /minutes US gal/min 1 US gal/min=3.7848 l/min 1 l/min = 0. 2642 US gal/minUK Gallon /minutes Imp gal/min 1 Imp gal/min=4.5456 l/min 1 l/min = 0.2199 Imp gal/minCubic feet /minutes cu ft/min 1 cu ft/min= 28.32 l/min 1 l/min = 0.0353 cu ft/min
Pressure bar bar
Pascal Pa 1 Pa= 10-5 bar 1 bar= 105 PaAtmosphere Atm 1 atm = 1.0132 bar 1 bar= 0.9869 atmKilogram force on cm² kgf /cm² 1 kgf /cm² = 0.9806 bar 1 bar= 1.0197 kgf/cm²Pound force on in² lbf/in² or psi 1 psi = 0.068948 bar 1 bar= 14.5038 psi
Unit of measure conversion
V = displacement (cm³/rev)Q = flow rate (l/min)T = torque (Nm)N = power (kW)n = speed (rpm)
P = pressure difference between inlet and outlet (bar)
mecc = mechanical efficiency
vol = volumetric efficiency
tot = total efficiency
Flow rate from pump
Torque absorbed by pump
Power absorbed by pump
Total efficiency
Main formulae
Use these tightening torque values on the motor terminals and the start switch.
Q[l/min] = V[cm³/rev] · n[rpm] · vol
· 10 -3
T[Nm] = V[cm³/rev] · P [bar]
20 · mecc
N[kW] = 2 · 10 -3 · T[Nm] · n[rpm]
60=
Q[l/min] · P [bar]
600 · tot
tot =
mecc ·
vol
Connection withoutthermal switch
®
4
25021400
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
02
07
09
12
04
05
IE/25021400/01-2012
88 [3.46]13.5 [0.53] 15.5 [0.73]
143.5 [5.65]
Ø76 [2.9
9]
6.5 [0.26]
6.5 [0.26]
3 [0.12]
Ø80 [3.1
5]
50 [1.9
7] M6
101 [3.9
8]
Ø14.9
[0.5
9]
6.4
[0.2
5]
Ø7 [0.28]
mm [inches]
12 VDC - 0.35 KW - D.80 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Voltage 12 VDCPower 0.35 kWNominal diameter 80 mm [3.15 in]
Motor type PermanentmagnetRotation CCW-CWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 2.2 kg [4.85 lb]
Code cc/rev. GR (Size)02 0.25 0504 0.45 0505 0.56 0507 0.75 05/109 0.9 05/112 1.2 05/1
®
5
25021400
0
10
5
20
15
30
25
40
45
35
50
55
60
65
70
75
80
85
90
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
04070912 05
02
S2
S3
0 0
1 3
2 6
3 9
4 12
5 15
6 18
7
8
9
10
11
12
13
14
15
16
17
18
21
24
27
30
33
36
39
42
45
48
51
54
S2 (min) S3 (%)
Amp25 30 35 40 45 50 55 60 65 70 75 80 85
IE/25021400/01-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 250 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 80A. Stabilized voltage to 12 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25021400 12VDC motor - 0.35 kW
Code Description
KIT07012.027 Starting switch kit 12VDC - 120A (fixing with clamp)
®
6
25021500
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
02
07
09
12
04
05
IE/25021500/00-2012
88 [3.46]13.5 [0.53] 15.5 [0.73]
143.5 [5.65]
Ø76 [2.9
9]
6.5 [0.26]
6.5 [0.26]
3 [0.12]
Ø80 [3.1
5]
50 [1.9
7] M6
101 [3.9
8]
Ø14.9
[0.5
9]
6.4
[0.2
5]
Ø7 [0.28]
mm [inches]
24 VDC - 0.4 KW - D.80 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Voltage 24 VDCPower 0.4 kWNominal diameter 80 mm [3.15 in]
Motor type PermanentmagnetRotation CCW-CWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 2.2 kg [4.85 lb]
Code cc/rev. GR (Size)02 0.25 0504 0.45 0505 0.56 0507 0.75 05/109 0.9 05/112 1.2 05/1
®
7
25021500
0
10
5
20
15
30
25
40
45
35
50
55
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
070912 05
S2
S3
0 0
2 6
4 12
6 18
8
10
12
14
16
18
20
24
30
36
42
48
54
60
S2 (min) S3 (%)
Amp5 10 15 20 25 30 35 40 45 50 55
IE/25021500/00-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 250 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 50A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25021500 24VDC motor - 0.4 kW
Code Description
KIT07012.032 Starting switch kit 24VDC - 120A (fixing with clamp)
®
8
25024200
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
02
07
09
12
04
05
IE/25024200/01-2013
mm [inches]
19 [0.75]
Ø 7
8 [3
.07]
32,4
[1.2
8]
M6
154,9 [6.1]13.5 [0.53]
101 [3.98]
6.5 [0.26]
6.5 [0.26]
3 [0.12]
Ø7.2
[0.28]
88 [3.4
6]
Ø80 [3.1
5]
Ø14.9
[0.5
9]
6.4
[0.2
5]
12 VDC - 0.5 KW - D.80 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Voltage 12 VDCPower 0.5 kWNominal diameter 80 mm [3.15 in]
Motor type PermanentmagnetRotation CCW-CWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 2.5 kg [5.51 lb]
Code cc/rev. GR (Size)02 0.25 0504 0.45 0505 0.56 0507 0.75 05/109 0.9 05/112 1.2 05/1
®
9
25024200
0
10
5
20
15
30
25
40
45
35
50
55
60
65
70
75
80
85
90
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
04070912 05
02
S2
S3
0 0
1 3
2 6
3 9
4 12
5 15
6 18
7
8
9
10
11
12
13
14
15
16
17
18
21
24
27
30
33
36
39
42
45
48
51
54
S2 (min) S3 (%)
Amp25 30 35 40 45 50 55 60 65 70 75 80 85
IE/25024200/01-2013
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 250 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 80A. Stabilized voltage to 12 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25024200 12VDC motor - 0.35 kW
Code Description
KIT07012.027 Starting switch kit 12VDC - 120A (fixing with clamp)
®
10
25024300
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
02
07
09
12
04
05
IE/25024300/01-2013
mm [inches]
19 [0.75]
Ø 7
8 [3
.07]
32,4
[1.2
8]
M6
154,9 [6.1]13.5 [0.53]
101 [3.98]
6.5 [0.26]
6.5 [0.26]
3 [0.12]
Ø7.2
[0.28]
88 [3.4
6]
Ø80 [3.1
5]
Ø14.9
[0.5
9]
6.4
[0.2
5]
24 VDC - 0.5 KW - D.80 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Voltage 24 VDCPower 0.5 kWNominal diameter 80 mm [3.15 in]
Motor type PermanentmagnetRotation CCW-CWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 2.5 kg [5.51 lb]
Code cc/rev. GR (Size)02 0.25 0504 0.45 0505 0.56 0507 0.75 05/109 0.9 05/112 1.2 05/1
®
11
25024300
0
10
5
20
15
30
25
40
45
35
50
55
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
070912 05
S2
S3
0 0
2 6
4 12
6 18
8
10
12
14
16
18
20
24
30
36
42
48
54
60
S2 (min) S3 (%)
Amp5 10 15 20 25 30 35 40 45 50 55
IE/25024300/01-2013
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 250 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 50A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25024300 24VDC motor - 0.5 kW
Code Description
KIT07012.032 Starting switch kit 24VDC - 120A (fixing with clamp)
®
12
25021600
162 [6.38]
115 [4.53]13.5 [0.53]
Ø76 [2.9
9]
101 [3.9
8]
6.5 [0.26]
6.5 [0.26]
3 [0.12]Ø7 [0.28]
88 [3.46]
Ø80 [3.1
5]
Ø14.9
[0.5
9]
6.4
[0.2
5]
M6
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
5.5
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
02
07
09
12
04
05
IE/25021600/00-2012
mm [inches]
12 VDC - 0.7 KW - D.80 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Voltage 12 VDCPower 0.7 kWNominal diameter 80 mm [3.15 in]
Motor type PermanentmagnetRotation CCW-CWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 2.7 kg [5.95 lb]
Code cc/rev. GR (Size)02 0.25 0504 0.45 0505 0.56 0507 0.75 05/109 0.9 05/112 1.2 05/1
®
13
25021600
0
20
10
40
30
60
50
80
90
70
100
110
120
130
140
150
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05070912
S2
S3
0 0
1 3
2 6
3 9
4 12
5 15
6 18
7
8
9
10
11
12
13
14
15
21
24
27
30
33
36
39
42
45
S2 (min) S3 (%)
Amp10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
IE/25021600/00-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 250 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 140A. Stabilized voltage to 12 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25021600 12VDC motor - 0.7 kW
Code Description
KIT07012.027 Starting switch kit 12VDC - 120A (fixing with clamp)
®
14
25021700
162 [6.38]
115 [4.53]13.5 [0.53]
Ø76 [2.9
9]
101 [3.9
8]
6.5 [0.26]
6.5 [0.26]
3 [0.12]Ø7 [0.28]
88 [3.46]
Ø80 [3.1
5]
Ø14.9
[0.5
9]
6.4
[0.2
5]
M6
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
5.5
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
02
07
09
12
04
05
IE/25021700/00-2012
mm [inches]
24 VDC - 0.8 KW - D.80 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Voltage 24 VDCPower 0.8 kWNominal diameter 80 mm [3.15 in]
Motor type PermanentmagnetRotation CCW-CWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 2.7 kg [5.95 lb]
Code cc/rev. GR (Size)02 0.25 0504 0.45 0505 0.56 0507 0.75 05/109 0.9 05/112 1.2 05/1
®
15
25021700
0
10
5
20
15
30
25
40
45
35
50
55
60
65
70
75
80
85
90
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
12 09 07
04
02
05
S2
S3
0 0
1 3
2 6
3 9
4 12
5 15
6 18
7
8
9
10
11
12
13
21
24
27
30
33
36
39
S2 (min) S3 (%)
Amp5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85
IE/25021700/00-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 250 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 80A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25021700 24VDC motor - 0.8 kW
Code Description
KIT07012.032 Starting switch kit 24VDC - 120A (fixing with clamp)
®
16
25021800
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
5.5
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
02
07
09
12
04
05
IE/25021800/02-2013
mm [inches]
19 [0.75]
Ø 7
8 [3
.07]
32,4
[1.2
8]
M6
154,9 [6.1]13.5 [0.53]
101 [3.98]
6.5 [0.26]
6.5 [0.26]
3 [0.12]
Ø7.2
[0.28]
88 [3.4
6]
Ø80 [3.1
5]
Ø14.9
[0.5
9]
6.4
[0.2
5]
12 VDC - 0.8 KW - D.80 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Voltage 12 VDCPower 0.8 kWNominal diameter 80 mm [3.15 in]
Motor type PermanentmagnetRotation CCW-CWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 2.5 kg [5.51 lb]
Code cc/rev. GR (Size)02 0.25 0504 0.45 0505 0.56 0507 0.75 05/109 0.9 05/112 1.2 05/1
®
17
25021800
0
20
10
40
30
60
50
80
90
70
100
110
120
130
140
150
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05070912
S2
S3
0 0
1 3
2 6
3 9
4 12
5 15
6 18
7
8
9
10
11
12
13
14
15
21
24
27
30
33
36
39
42
45
S2 (min) S3 (%)
Amp10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
IE/25021800/02-2013
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 250 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 140A. Stabilized voltage to 12 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25021800 12VDC motor - 0.8 kW
Code Description
KIT07012.027 Starting switch kit 12VDC - 120A (fixing with clamp)
®
18
25021900
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
5.5
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
02
07
09
12
04
05
IE/25021900/02-2013
mm [inches]
19 [0.75]
Ø 7
8 [3
.07]
32,4
[1.2
8]
M6
154,9 [6.1]13.5 [0.53]
101 [3.98]
6.5 [0.26]
6.5 [0.26]
3 [0.12]
Ø7.2
[0.28]
88 [3.4
6]
Ø80 [3.1
5]
Ø14.9
[0.5
9]
6.4
[0.2
5]
24 VDC - 0.8 KW - D.80 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Voltage 24 VDCPower 0.8 kWNominal diameter 80 mm [3.15 in]
Motor type PermanentmagnetRotation CCW-CWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 2.5 kg [5.51 lb]
Code cc/rev. GR (Size)02 0.25 0504 0.45 0505 0.56 0507 0.75 05/109 0.9 05/112 1.2 05/1
®
19
25021900
0
10
5
20
15
30
25
40
45
35
50
55
60
65
70
75
80
85
90
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
12 09 07
04
02
05
S2
S3
0 0
1 3
2 6
3 9
4 12
5 15
6 18
7
8
9
10
11
12
13
21
24
27
30
33
36
39
S2 (min) S3 (%)
Amp5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85
IE/25021900/02-2013
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.2 cc/rev [0.012 ÷ 0.073 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 250 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 80A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25021900 24VDC motor - 0.8 kW
Code Description
KIT07012.032 Starting switch kit 24VDC - 120A (fixing with clamp)
®
20
25021100
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
20 40 60 80 100 120 140 160 180 200 220 240 260
02
05
07
09
10
04
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
24
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78
60
4843
38
32
2622
2017
1512
63
133 [5.24]
158 [6.22]
Ø98.3 [3.87]
Ø114 [4.4
9]
90.4
[3.5
6]
Ø35 [1.3
8]
Ø15 [0.5
9]
6.4
[0.2
5]
1/4-20UNC
12.3 [0.48] max
11 [0.43] max
M5 n°2
M8
9.1 [0.36] max
D1E
1A
2E
2
IE/25021100/00-2012
mm [inches]
12 VDC - 1.6 KW - D.115 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Performance with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)02 0.25 05 22 2.2 104 0.45 05 26 2.6 105 0.56 05 32 3.2 107 0.75 05/1 38 3.8 109 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 1
Voltage 12 VDCPower 1.6 kWNominal diameter 115 mm [4.53 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 6.7 kg [14.77 lb]
®
21
25021100
0
20
40
60
80
100
120
140
160
180
200
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05
07
09
10
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32 26 22 20
17
15
12
63
S2
S3
0 0
2 4
4 8
6 12
8 16
10 20
12 24
14 28
16 32
18 36
20 40
S2 (min) S3 (%)
Amp30 40 50 60 70 80 90 100 110 120 130 140 150 160 180 200 220 240 260 280
IE/25021100/00-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Current with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 250 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 140A. Stabilized voltage to 12 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25021100 12VDC motor - 1.6 kW
25016600 12VDC motor - 1.6 kW with thermal switch
90340008 Thermal switch
Code Description
KIT07012.025 Starting switch kit 12VDC - 120A (fixing with screws)
Motor with thermal switch
®
22
25021200
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
20 40 60 80 100 120 140 160 180 200 220 240 260
02
05
07
09
10
04
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
24
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78
60
48
43
38
32 26
63
2220171512
133 [5.24]
158 [6.22]
Ø98.3 [3.87]
Ø114 [4.4
9]
90.4
[3.5
6]
Ø35 [1.3
8]
Ø15 [0.5
9]
6.4
[0.2
5]
1/4-20UNC
12.3 [0.48] max
11 [0.43] max
M5 n°2
M8
9.1 [0.36] max
D1E
1A
2E
2
IE/25021200/00-2012
mm [inches]
24 VDC - 2.2 KW - D.115 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Performance with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)02 0.25 05 22 2.2 104 0.45 05 26 2.6 105 0.56 05 32 3.2 107 0.75 05/1 38 3.8 109 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 1
Voltage 24 VDCPower 2.2 kWNominal diameter 115 mm [4.53 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 6.7 kg [14.77 lb]
®
23
25021200
0
10
20
30
40
50
60
70
80
90
100
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05
07
09
10
0
20
40
60
80
100
120
140
160
180
200
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32 26
22
20
17
15
12
63
S2
S3
0 0
2 4
4 8
6 12
8 16
10 20
12 24
14 28
16 32
18 36
20 40
S2 (min) S3 (%)
Amp10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
IE/25021200/00-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Current with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 200A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25021200 24VDC motor - 2.2 kW
25016700 24VDC motor - 2.2 kW with thermal switch
90340008 Thermal switch
Code Description
KIT07012.026 Starting switch kit 24VDC - 120A (fixing with screws)
Motor with thermal switch
®
24
25022200
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
20 40 60 80 100 120 140 160 180 200 220 240 260
02
05
07
09
10
04
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
24
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78
60
4843
38
32
2622
2017
1512
63
111 [4.37]
173 [6.81]
Ø98.35 [3.87]
Ø112 [4.4
1]
90.5
[3.5
6]
Ø35 [1.3
8]
Ø15 [0.5
9]
6.4
[0.2
5]
1/4-20UNC
12 [0.47]
6.4 [0.25]
Ø 5.5 N° 6
[0.22]
M8
8.5 [0.33]
IE/25022200/00-2012
mm [inches]
12 VDC- 1.5 KW - D.115 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Performance with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)02 0.25 05 22 2.2 104 0.45 05 26 2.6 105 0.56 05 32 3.2 107 0.75 05/1 38 3.8 109 0,9 05/1 43 4.3 110 1,0 05/1 48 4.8 112 1,2 05/1 60 6.0 115 1,5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 1
Voltage 12 VDCPower 1.5 kWNominal diameter 115 mm [4.53 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 6.7 kg [14.77 lb]
®
25
25022200
0
20
40
60
80
100
120
140
160
180
200
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05
07
09
10
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32 26 22 20
17
15
12
63
S2
S3
0 0
2 4
4 8
6 12
8 16
10 20
12 24
14 28
16 32
18 36
20 40
S2 (min) S3 (%)
Amp30 40 50 60 70 80 90 100 110 120 130 140 150 160 180 200 220 240 260 280
IE/25022200/00-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Current with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 300A. Stabilized voltage to 12 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25022200 12VDC motor - 1.5 kW
Code Description
KIT07012.033 Starting switch kit 12VDC - 120A (fixing with clamp)
®
26
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
20 40 60 80 100 120 140 160 180 200 220 240 260
02
05
07
09
10
04
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
24
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78
60
4843
38
32
2622
2017
1512
63
IE/25022200 FAN/02-2014
157 [6.18]
5 [0.2
]
Ø14,8
[0.5
8]
Ø35 [1.3
8]
Ø112 [4.4
1]
173 [6.81]46 [1.81]
Ø 1
16,6
[4.5
9]
118 [4.6
5]
132 [5.2
]
219 [8.62]
Ø 110 [4.33]
118 [4.65]
132 [5.2]
M8
Ø 5.5 [0.22] N.6
M8
X
mm [inches]
12 VDC - 1.5 KW - D.115 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Performance with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)02 0.25 05 22 2.2 104 0.45 05 26 2.6 105 0.56 05 32 3.2 107 0.75 05/1 38 3.8 109 0,9 05/1 43 4.3 110 1,0 05/1 48 4.8 112 1,2 05/1 60 6.0 115 1,5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 1
Voltage 12 VDCPower 1.5 kWNominal diameter 115 mm [4.53 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 10
S2 / S3 duty service see curvesInsulation class FWeight 7.4 kg [16.31 lb]
X = see ordering code
25022200 FAN®
27
0
20
40
60
80
100
120
140
160
180
200
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05
07
09
10
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32 26 22 20
17
15
12
63
IE/25022200 FAN/02-2014
S2
S3
0 0
4 4
8 8
12 12
16 16
20 20
24 24
28 28
32 32
36 36
40
44 40
44
S2 (min) S3 (%)
Amp110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Current with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 300A. Stabilized voltage to 12 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
KIT07012.033 Starting switch kit 12VDC - 120A (fixing with clamp)Powerpack
X mm [inch]
Code Fan cooled
motor
Code Fan cooled
motorwith thermal
swich
Code Fan cooled
kit
FP 52.6 [2.07] KIT09008.061 KIT09008.062 25017800
MC 41.6 [1.64] KIT01008.065 KIT01008.088 25002300
25022200 FAN
Motor with thermal switch
®
28
25022300
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
20 40 60 80 100 120 140 160 180 200 220 240 260
02
05
07
09
10
04
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
24
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78
60
48
43
38
32 26
63
2220171512
111 [4.37]
173 [6.81]
Ø98.35 [3.87]
Ø11
2 [
4.4
1]
90
.5 [
3.5
6]
Ø3
5 [
1.3
8]
Ø1
5 [
0.5
9]
6.4
[0
.25
]
1/4-20UNC
12 [0.47]
6.4 [0.25]
Ø 5.5 N° 6
[0.22]
M8
8.5 [0.33]
IE/25022300/00-2012
mm [inches]
24 VDC - 2.0 KW - D.115 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Performance with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)02 0.25 05 22 2.2 104 0.45 05 26 2.6 105 0.56 05 32 3.2 107 0.75 05/1 38 3.8 109 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 1
Voltage 24 VDCPower 2.0 kWNominal diameter 115 mm [4.53 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 6.7 kg [14.77 lb]
®
29
25022300
0
10
20
30
40
50
60
70
80
90
100
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05
07
09
10
0
20
40
60
80
100
120
140
160
180
200
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32 26
22
20
17
15
12
63
S2
S3
0 0
2 4
4 8
6 12
8 16
10 20
12 24
14 28
16 32
18 36
20 40
S2 (min) S3 (%)
Amp10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
IE/25022300/00-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Current with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 200A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25022300 24VDC motor - 2.0 kW
Code Description
KIT07012.034 Starting switch kit 24VDC - 120A (fixing with clamp)
®
30
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
20 40 60 80 100 120 140 160 180 200 220 240 260
02
05
07
09
10
04
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
24
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78
60
48
43
38
32 26
63
2220171512
IE/25022300 FAN/02-2014
157 [6.18]
5 [0.2
]
Ø14,8
[0.5
8]
Ø35 [1.3
8]
Ø112 [4.4
1]
173 [6.81]46 [1.81]
Ø 1
16,6
[4.5
9]
118 [4.6
5]
132 [5.2
]
219 [8.62]
Ø 110 [4.33]
118 [4.65]
132 [5.2]
M8
Ø 5.5 [0.22] N.6
M8
X
mm [inches]
24 VDC - 2.0 KW - D.115 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Performance with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)02 0.25 05 22 2.2 104 0.45 05 26 2.6 105 0.56 05 32 3.2 107 0.75 05/1 38 3.8 109 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 1
Voltage 24 VDCPower 2.0 kWNominal diameter 115 mm [4.53 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 10
S2 / S3 duty service see curvesInsulation class FWeight 7.4 kg [16.31 lb]
25022300 FAN
X = see ordering code
®
31
0
10
20
30
40
50
60
70
80
90
100
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05
07
09
10
0
20
40
60
80
100
120
140
160
180
200
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32 26
22
20
17
15
12
63
IE/25022300 FAN/02-2014
S2
S3
0 0
4 4
8 8
12 12
16 16
20 20
24 24
28 28
32 32
36 36
44
40
44
40
S2 (min) S3 (%)
Amp40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Current with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 200A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
KIT07012.034 Starting switch kit 24VDC - 120A (fixing with clamp)Powerpack
X mm [inch]
Code Fan cooled
motor
Code Fan cooled
motorwith thermal
swich
Code Fan cooled
kit
FP 52.6 [2.07] KIT09008.031 KIT09008.063 25017800
MC 41.6 [1.64] KIT01008.067 KIT01008.077 25002300
25022300 FAN
Motor with thermal switch
®
32
25022000
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
20 40 60 80 100 120 140 160 180 200 220 240 260
02
05
07
09
10
04
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
24
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78
60
4843
38
32
2622
2017
1512
63
IE/25022000/00-2012
M5 n°2
Ø35 [1.3
8]
Ø112 [4.4
1] Ø15 [0.5
9]
6.4
3 [0.2
5]
11 [0.43]
11.8 [0.46] 173 [6.81]
115 [4.53]8.4 [0.33]
Ø98.35 [3.87]
90 [3.5
4]
1/4-20UNC
M8
mm [inches]
12 VDC - 1.6 KW - D.115 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Performance with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)02 0.25 05 22 2.2 104 0.45 05 26 2.6 105 0.56 05 32 3.2 107 0.75 05/1 38 3.8 109 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 1
Voltage 12 VDCPower 1.6 kWNominal diameter 115 mm [4.53 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 6.7 kg [14.77 lb]
®
33
25022000
0
20
40
60
80
100
120
140
160
180
200
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05
07
09
10
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32 26 22 20
17
15
12
63
S2
S3
0 0
2 4
4 8
6 12
8 16
10 20
12 24
14 28
16 32
18 36
20 40
S2 (min) S3 (%)
Amp30 40 50 60 70 80 90 100 110 120 130 140 150 160 180 200 220 240 260 280
IE/25022000/00-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Current with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Code Description
KIT07012.025 Starting switch kit 12VDC - 120A (fixing with screws)
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 300A. Stabilized voltage to 12 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25022000 24VDC motor - 1.6 kW
®
34
25022100
00
0.5
0.50
0.75
0.25
1.00
1.25
1.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
20 40 60 80 100 120 140 160 180 200 220 240 260
02
05
07
09
10
04
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
24
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78
60
48
43
38
32 26
63
2220171512
IE/25022100/00-2012
M5 n°2
Ø35 [1.3
8]
Ø112 [4.4
1] Ø15 [0.5
9]
6.4
3 [0.2
5]
11 [0.43]
11.8 [0.46] 173 [6.81]
115 [4.53]8.4 [0.33]
Ø98.35 [3.87]
90 [3.5
4]
1/4-20UNC
M8
mm [inches]
24 VDC - 2.2 KW - D.115 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Performance with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)02 0.25 05 22 2.2 104 0.45 05 26 2.6 105 0.56 05 32 3.2 107 0.75 05/1 38 3.8 109 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 1
Voltage 24 VDCPower 2.2 kWNominal diameter 115 mm [4.53 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 6.7 kg [14.77 lb]
®
35
25022100
0
10
20
30
40
50
60
70
80
90
100
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05
07
09
10
0
20
40
60
80
100
120
140
160
180
200
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32 26
22
20
17
15
12
63
S2
S3
0 0
2 4
4 8
6 12
8 16
10 20
12 24
14 28
16 32
18 36
20 40
S2 (min) S3 (%)
Amp10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
IE/25022100/00-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Current with GR05 / GR1 pumps Displacement 1.2 ÷ 7.8 cc/rev [0.073 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Code Description
KIT07012.026 Starting switch kit 24VDC - 120A (fixing with screws)
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 200A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25022100 24VDC motor - 2.2 kW
®
36
25022600
00
0.50
0.75
0.25
1.00
1.25
1.50
1.75
2.00
1.0
5.0
6.0
7.0
8.0
4.0
3.0
2.0
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
20 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05
09
10
07
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
22 2017
1512
48
60
43
3832
26
IE/25022600/00-2012
Ø114.3
[4.5
]
Ø35 [1.3
8] Ø
15 [0.5
9]
6.4
3 [0.2
5]
9.1 [0.36]
11.8 [0.46]
M5 n°2
121.2 [4.77]8.4 [0.33]
Ø98.32 [3.87]161.8 [6.37]
90.4
[3.5
6]
1/4-20UNC
5-1
6-1
8U
NC
-2A
mm [inches]
12 VDC - 1.6 KW - D.115 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Performance with GR05 / GR1 pumps Displacement 1.2 ÷ 6.0 cc/rev [0.073 ÷ 0.366 in³/rev]
Voltage 12 VDCPower 1.6 kWNominal diameter 115 mm [4.53 in]
Motor type Serie “U”(USA)Rotation CCWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 6.7 kg [14.77 lb]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)02 0.25 05 22 2.2 104 0.45 05 26 2.6 105 0.56 05 32 3.2 107 0.75 05/1 38 3.8 109 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 117 1.7 120 2.0 1
®
37
25022600
0
20
40
60
80
100
120
140
160
180
200
220
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
04
05
10
09
07
02
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
60 48 43 38 32 26 22
20
12
17
15
S2
S3
0 0
2 4
4 8
6 12
8 16
10 20
12 24
14 28
16 32
18 36
20 40
S2 (min) S3 (%)
Amp30 40 50 60 70 80 90 100 110 120 130 140 150 160 180 200 220 240 260 280
IE/25022600/00-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Current with GR05 / GR1 pumps Displacement 1.2 ÷ 6.0 cc/rev [0.073 ÷ 0.366 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 300A. Stabilized voltage to 12 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25022600 12VDC motor - 1.6 kW
25022800 12VDC motor - 1.6 kW with thermal swich
Motor with thermal switch
Code Description
KIT07012.025 Starting switch kit 12VDC - 120A (fixing with screws)
®
38
25022700
00
0.50
0.75
0.25
1.00
1.25
1.50
1.75
2.00
1.0
5.0
6.0
7.0
8.0
4.0
3.0
2.0
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
20 40 60 80 100 120 140 160 180 200 220 240 260
02
04
05
09
10
07
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
48
60
43
38
20
2226
32
17
1512
IE/25022700/00-2012
Ø114.3
[4.5
]
Ø35 [1.3
8] Ø
15 [0.5
9]
6.4
3 [0.2
5]
9.1 [0.36]
11.8 [0.46]
M5 n°2
121.2 [4.77]8.4 [0.33]
Ø98.32 [3.87]161.8 [6.37]
90.4
[3.5
6]
1/4-20UNC
5-1
6-1
8U
NC
-2A
mm [inches]
24 VDC- 2.2 KW - D.115 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Performance with GR05 / GR1 pumps Displacement 1.2 ÷ 6.0 cc/rev [0.073 ÷ 0.366 in³/rev]
Voltage 24 VDCPower 2.2 kWNominal diameter 115 mm [4.53 in]
Motor type Serie “U”(USA)Rotation CCWProtection class IP(with motor assembled on hydraulic power pack) 54
S2 / S3 duty service see curvesInsulation class FWeight 6.7 kg [14.77 lb]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)02 0.25 05 22 2.2 104 0.45 05 26 2.6 105 0.56 05 32 3.2 107 0.75 05/1 38 3.8 109 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 117 1.7 120 2.0 1
®
39
25022700
0
10
20
30
40
50
60
70
80
90
100
Amp
bar
psi0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
200 40 60 80 100 120 140 160 180 200 220 240 260
04
05
10
09
07
02
0
20
40
60
80
100
120
140
160
180
200
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
60 48 43 38
32
22
20
12
1715
26
0 0
2 4
4 8
6 12
8 16
10 20
12 24
14 28
16 32
18 36
20 40
S2 (min) S3 (%)
Amp10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
S2
S3
IE/25022700/00-2012
Current with GR05 / GR1 pumps Displacement 0.2 ÷ 1.0 cc/rev [0.012 ÷ 0.061 in³/rev]
Current with GR05 / GR1 pumps Displacement 1.2 ÷ 6.0 cc/rev [0.073 ÷ 0.366 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 200A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25022700 24VDC motor - 2.2 kW
25022900 24VDC motor - 2.2 kW with thermal swich
Motor with thermal switch
Code Description
KIT07012.026 Starting switch kit 24VDC - 120A (fixing with screws)
®
40
25021300
138 [5.43]27.6 [1.09]
6.5 [0.26] 12.5 [0.49]Ø110.5 [4.35]
M6
12 [0.47]
43 [1.69] 207.5 [8.17]
250.5 [9.86]
22 [0.87]
Ø1
25
[4
.92
]
Ø4
2 [
1.6
5]
Ø1
29
[5
.08
]
Ø5
0 [
1.9
7]
10
2 [
4.0
2]
Ø2
4.2
[0
.95
]
8 [
0.3
1]
M5 n°2
M8
00
1
1.75
2.00
1.50
1.25
1.00
0.75
0.50
0.25
2.25
2.50
2
10
9
8
7
6
5
4
3
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
17
20
22
12
15
10
09
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.524
26
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
26
78
60
48
43
38
63
32
IE/25021300/00-2012
mm [inches]
24 VDC - 3.0 KW - D.125 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.9 ÷ 2.2 cc/rev [0.055 ÷ 0.134 in³/rev]
Performance with GR1 pumps Displacement 2.6 ÷ 7.8 cc/rev [0.159 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)09 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 122 2.2 126 2.6 132 3.2 138 3.8 1
Voltage 24 VDCPower 3.0 kWNominal diameter 125 mm [4.92 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 20
S2 / S3 duty service see curvesInsulation class FWeight 12 kg [26.46 lb]
®
41
25021300
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32
26
63
S2
S3
0 0
2 4
4 8
6 12
8 16
10 20
12 24
14 28
16 32
18 36
20 40
S2 (min) S3 (%)
Amp60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260
0
40
20
60
80
100
120
140
160
180
200
220
240
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
22
20
17
15
12
09
10
IE/25021300/00-2012
Current with GR05 / GR1 pumps Displacement 0.9 ÷ 2.2 cc/rev [0.055 ÷ 0.134 in³/rev]
Current with GR1 pumps Displacement 2.6 ÷ 7.8 cc/rev [0.159 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 300A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25021300 24VDC motor - 3.0 kW
25023000 24VDC motor - 3.0 kW with thermal switch
Code Description
KIT07012.019 Starting switch kit 24VDC - 150A (fixing with screws)
Motor with thermal switch
®
42
00
1
1.75
2.00
1.50
1.25
1.00
0.75
0.50
0.25
2.25
2.50
2
10
9
8
7
6
5
4
3
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
17
20
22
12
15
10
09
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.524
26
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
26
78
60
48
43
38
63
32
IE/25021300 FAN/00-2012
M8
A2
E2
D1
E1
193,9 [7.63]
55.9 [2.2] 207,5 [8.17] Ø 110 [4.33]
118 [4.65]
133 [5.24]
263,4 [10.37]
Ø 1
25 [4.9
2]
Ø50 [1.9
7]
Ø 1
29 [5.0
8]
8 [0.3
1]
Ø 2
0 [0.7
9]
5 [0.2
]
133 [5.2
4]
118 [4.6
5]
M8
X
M5 n°2
mm [inches]
24 VDC - 3.0 KW - D.125 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.9 ÷ 2.2 cc/rev [0.055 ÷ 0.134 in³/rev]
Performance with GR1 pumps Displacement 2.6 ÷ 7.8 cc/rev [0.159 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)09 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 122 2.2 126 2.6 132 3.2 138 3.8 1
Voltage 24 VDCPower 3.0 kWNominal diameter 125 mm [4.92 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 20
S2 / S3 duty service see curvesInsulation class FWeight 13.1 kg [28.88 lb]
X = see ordering code
25021300 FAN®
43
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32
26
63
0
40
20
60
80
100
120
140
160
180
200
220
240
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
22
20
17
15
12
09
10
IE/25021300 FAN/00-2012
S2
S3
0 0
4
8
12
4
16
8
20
12
24
16
20
24
28
32
36
40
44
48
28
32
36
40
44
48
S2 (min) S3 (%)
Amp100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260
Current with GR05 / GR1 pumps Displacement 0.9 ÷ 2.2 cc/rev [0.055 ÷ 0.134 in³/rev]
Current with GR1 pumps Displacement 2.6 ÷ 7.8 cc/rev [0.159 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 300A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
KIT07012.019 Starting switch kit 24VDC - 150A (fixing with clamp)Powerpack
X mm [inch]
Code Fan cooled
motor
Code Fan cooled
motorwith thermal
swich
Code Fan cooled
kit
FP 53.2 [2.09] KIT09008.029 * 25017700
MC 43.4 [1.71] KIT01008.118 KIT01008.119 25006100
25021300 FAN
Motor with thermal switch
* please contact our sales department
®
44
25022400
00
1
1.75
2.00
1.50
1.25
1.00
0.75
0.50
0.25
2.25
2.50
2
10
9
8
7
6
5
4
3
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
17
20
22
12
15
10
09
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.524
26
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
26
78
60
48
43
38
63
32
IE/25022400/00-2012
M5 n°2
Ø 1
25
[4
.92
]
Ø 1
29
[5
.08
]
10
2 [
4.0
2]
Ø 5
9 [
2.3
2]
27,5 [1.08]
131,5 [5.18]22 [0.87]
6,5 [0.26] 11 [0.43]
110,5 [4.35]
M6
M8
12 [0.47]
43 [1.69] 200 [7.87]
243 [9.57]
Ø 4
2 [
1.6
5]
24
,3 [
0.9
6]
8 [
0.3
1]
mm [inches]
24 VDC - 3.0 KW - D.125 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.9 ÷ 2.2 cc/rev [0.055 ÷ 0.134 in³/rev]
Performance with GR1 pumps Displacement 2.6 ÷ 7.8 cc/rev [0.159 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)09 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 122 2.2 126 2.6 132 3.2 138 3.8 1
Voltage 24 VDCPower 3.0 kWNominal diameter 125 mm [4.92 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 20
S2 / S3 duty service see curvesInsulation class FWeight 10,5 kg [23.15 lb]
®
45
25022400
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32
26
63
S2
S3
0 0
2 4
4 8
6 12
8 16
10 20
12 24
14 28
16 32
18 36
20 40
S2 (min) S3 (%)
Amp60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260
0
40
20
60
80
100
120
140
160
180
200
220
240
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
22
20
17
15
12
09
10
IE/25022400/00-2012
Current with GR05 / GR1 pumps Displacement 0.9 ÷ 2.2 cc/rev [0.055 ÷ 0.134 in³/rev]
Current with GR1 pumps Displacement 2.6 ÷ 7.8 cc/rev [0.159 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 300A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
25022400 24VDC motor - 3.0 kW
Code Description
KIT07012.019 Starting switch kit 24VDC - 150A (fixing with screws)
®
46
00
1
1.75
2.00
1.50
1.25
1.00
0.75
0.50
0.25
2.25
2.50
2
10
9
8
7
6
5
4
3
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
17
20
22
12
15
10
09
0
2
4
6
8
10
12
14
16
18
20
22
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.524
26
l/minUSgpm
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
26
78
60
48
43
38
63
32
IE/25022400 FAN/00-2012
M8
A2E
2D
1E
1
187,4 [7.38]
55.9 [2.2] 200 [7.87] Ø 110 [4.33]
118 [4.65]
133 [5.24]
255,9 [10.07]
Ø 1
25 [4.9
2]
Ø 5
9 [2.3
2]
Ø 1
29 [5.0
8]
8 [0.3
1]
Ø 2
0 [0.7
9]
5 [0.2
]
133 [5.2
4]
118 [4.6
5]
M8
X
M5 n°2
mm [inches]
24 VDC - 3.0 KW - D.125 MOTOR
RATED FEATURES PUMP TYPE
Performance with GR05 / GR1 pumpsDisplacement 0.9 ÷ 2.2 cc/rev [0.055 ÷ 0.134 in³/rev]
Performance with GR1 pumps Displacement 2.6 ÷ 7.8 cc/rev [0.159 ÷ 0.476 in³/rev]
Code cc/rev. GR (Size) Code cc/rev. GR (Size)09 0.9 05/1 43 4.3 110 1.0 05/1 48 4.8 112 1.2 05/1 60 6.0 115 1.5 1 63 6.3 117 1.7 1 78 7.8 120 2.0 122 2.2 126 2.6 132 3.2 138 3.8 1
Voltage 24 VDCPower 3.0 kWNominal diameter 125 mm [4.92 in]
Motor type Wound field compoundRotation CCWProtection class IP(with motor assembled on hydraulic power pack) 20
S2 / S3 duty service see curvesInsulation class FWeight 11.6 kg [25.57 lb]
X = see ordering code
25022400 FAN®
47
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
78 60 48 43 38 32
26
63
0
40
20
60
80
100
120
140
160
180
200
220
240
Amp
bar
psi
0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
22
20
17
15
12
09
10
IE/25022400 FAN/00-2012
S2
S3
0 0
4
8
12
4
16
8
20
12
24
16
20
24
28
32
36
40
44
48
28
32
36
40
44
48
S2 (min) S3 (%)
Amp100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260
Current with GR05 / GR1 pumps Displacement 0.9 ÷ 2.2 cc/rev [0.055 ÷ 0.134 in³/rev]
Current with GR1 pumps Displacement 2.6 ÷ 7.8 cc/rev [0.159 ÷ 0.476 in³/rev]
Thermal characteristics S2 - S3
Reference data: maximum nominal pressure Pmax = 290 bar. Oil ISO VG32 tempera-ture 35°C (viscosity 40 cSt), outside temperature 25°C.
Maximum nominal current Imax = 300A. Stabilized voltage to 24 Vdc detected at the terminals of the electric motor.
ORDERING CODE
Code Description
KIT07012.019 Starting switch kit 24VDC - 150A (fixing with screws)Powerpack
X mm [inch]
Code Fan cooled
motor
Code Fan cooled
motorwith thermal
swich
Code Fan cooled
kit
FP 53.2 [2.09] * * 25017700
MC 43.4 [1.71] * * 25006100
25022400 FAN
* please contact our sales department
®
48IE/STARTING SWITCH/00-2012
182,5 [3.25]
Female Faston
6.3-08 N.2
64,5 [2.54]
29 [1.15]
Ø 5
4.5
[2.1
5]
26 [1.0
2]
M8 N
.2
5 [0.2]
72 [2.83]
Female Faston
6.3-08 N.2
57.3 [2.26]
20 [0.79]
Ø 4
0 [
1.5
7]
21
[0
.83
]
M6
N.2
5 [0.2]
mm [inches]
mm [inches]
RATED FEATURES
Description 12 VDC 24 VDC
Min cut-on voltage 8.4 V @ 20°C 11 V @ 60°C16.8 V @ 20°C 23 V @ 60°C
Rated voltage 12 VDC 24 VDCCut off voltage 0.6 ÷ 4 VDC 1.2 ÷ 8 VDCCurrent consumption 1.9 ± 0.2 A 0.8 ± 0.1 AOperating temperature range -20 ÷ +60 °C -20 ÷ +60 °CVibration specification 9 g 9 gRated Current 120 A 120 ACoil short time duty S2 = 15 min S2 = 20 minProtection degree IP 67 IP 67Weight 290 gr [0.69 lb] 320 gr [0.71 lb]
RATED FEATURES
Description 24 VDC
Min cut-on voltage 16.8 V @ 20°C 23 V @ 60°CRated voltage 24 VDCCut off voltage 1.2 ÷ 8 VDCCurrent consumption 1.1 ± 0.1 AOperating temperature range -30 ÷ +60 °CVibration specification 9 gRated Current 150 ACoil short time duty S3= 10% @ 350AProtection degree IP 54Weight 690 gr [1.52 lb]
Wiring diagram
Wiring diagram
Starting switch: 120A
Starting switch: 150A
ORDERING CODE
ORDERING CODE
Motor type Code (12 VDC)Code
(24 VDC)D. 80 fixing with clamp KIT07012.027 KIT07012.032D. 115 fixing with clamp KIT07012.033 KIT07012.034D. 115 fixing with screws KIT07012.025 KIT07012.026
Motor type Code (24 VDC)D. 125 fixing with screws KIT07012.019
®
Dana Brevini Fluid Power S.p.A.Via Moscova, 642124 Reggio Emilia - ItalyTel. +39 0522 270711Fax +39 0522 270660www.dana.com/breviniinfo@brevinifl uidpower.com
®
Code DOC00053 - Rev. 05