Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Heating & Cooling Components for today’s modern hydronic systems
DIRTMAG®
NA5463 SERIES
with BOILER TREATMENT KIT
KIT FEATURES
Clean and protect hydronic systemsWhen water quality is less than perfect, the DIRTMAG® Boiler Treatment Kit is a convenient and effective solution to protect your hydronic system. The time tested additives Hydro-Solv™ QC and Pro-Tek® QT from Rhomar Water are proven to be excellent in cleaning and inhibiting against corrosion and lime-scaling. Together with the highly efficient Caleffi DIRTMAG® dirt separator, the #1 market leader in magnetic dirt separation, the kit provides the ultimate in hydronic system protection.
Hydro-Solv™ QC cleaner: Quickly loosens and removes lime scale, corrosion, organic material, flux residue, cutting oils, dirt and biological contamination.
DIRTMAG® drain valve access port: ¾” garden hose thread connection provides convenient port for injecting the aerosol cleaner and inhibitor.
Pro-Tek® QT inhibitor: Passivates metal surfaces and impedes hardness precipitation to provide long term protection against corrosion and lime scale formation. Works on iron, stainless steel, aluminum, copper and brass.
Aerosol: Aerosol makes dosing quick and simple with no mess or inconvenience. Injected directly through the DIRTMAG® drain valve, takes only a few seconds for full dispersion.
DIRTMAG®: Removes non-ferrous debris as well as ferrous oxide from systems, accomplishing 2 ½ times the ferrous oxide removal performance of other dirt separators, delivering up to 100% elimination efficiency.
Ultimate protection: Convenient kit to 1. Clean the system; 2. Protect against build-up; and 3. Continuously separate all particles. Cleans and treats typical residential and small commercial systems of up to 30 gallons.
PRODUCT RANGE - DIRTMAG® w/ Boiler Treatment Kit
Caleffi North America, Inc. [email protected] · www.caleffi.com
© Copyright 2018 Caleffi North America, Inc.
APPLICATION DIAGRAM
Caleffi Partner:
DIRTMAG® PERFORMANCE
CATALOG
ONLINE
WE RESERVE THE RIGHT TO CHANGE OUR PRODUCTS AND THEIR RELEVANT TECHNICAL DATA, CONTAINED IN THIS PUBLICATION, AT ANY TIME AND
WITHOUT PRIOR NOTICE.
0362
8-18
NA
CHEMICAL PERFORMANCE
MAGNET
SERVICEABLE MESH
DRAIN VALVE WITH GHT FOR AEROSOL INJECTION
SIZESMAX.
FLOW RATE:(GPM)
CODE
NPT SWEAT PRESS
1” 10 NA546306T NA546328T NA546366T
1¼” 15 NA546307T NA546335T NA546367T
CONSTRUCTION
VENT
MAX. WORKING PRESSURE 150 psi (10 bar)
WORKING TEMPERATURE RANGE 32 - 250°F (0 - 120°C)
MAX. PERCENTAGE OF GLYCOL 50 %
PARTICLE SEPARATION CAPACITY 5 microns (0.2 mil)
FERROUS IMPURITIES SEPARATION EFFICIENCY up to 100 %
LARGE CHAMBER
DIRTMAG® plus Boiler Chemical Treatment Kit, includes 1 can each of Rhomar Water Hydro-Solv™ QC Cleaner and Pro-Tek® QT Inhibitor.Annual fluid analysis and/or maintenance recommended. Send any samples to Rhomar Water or other accredited chemical lab for analysis.
U.S Patent pending.
AEROSOL CAN INJECTION CAP
Pro-Tek® QT Inhibitor
Hydro-Solv™ QC Pro-Tek® QT
MEDIUM Aerosol
COLOR Red Blue
ODOR Chemical, faintly Sweet
PH 7.0 - 8.0 7.5 - 8.5
RELATIVE DENSITY (Specific Gravity) 1.02 - 1.03 1.05 - 1.06
SOLUBILITY Soluble in cold and hot water
DOSAGE 16 oz can treats up to 30 gallons
ACCEPTABLE WATER HARDNESS*
N/A< 7 grains/gallon
(120 ppm)
CORROSIVES (Acceptable Chlorides &
Sulfates)*N/A <100 ppm
*Always adhere to boiler manufacturer water quality parameters to maintain the boiler warranty.