Upload
ngohanh
View
226
Download
0
Embed Size (px)
Citation preview
Disassembling HP Mini 210 Back CaseRemoving the back case on this computer so you can get inside.
Escrito por: Heather Freed
Disassembling HP Mini 210 Back Case
© iFixit — CC BY-NC-SA es.iFixit.com Página 1 de 5
INTRODUCCIÓN
Removing the back case is easy and snaps right off, giving you access to all the parts inside.
HERRAMIENTAS:Spudger (1)
Disassembling HP Mini 210 Back Case
© iFixit — CC BY-NC-SA es.iFixit.com Página 2 de 5
Paso 1 — Battery
Turn off and unplug the netbook before replacing the battery.
Hold the netbook top-side down with the lid closed.
Slide the plastic battery release latches towards the lock symbols.
The left tab unlocks completely, but you will need to hold the right tab towards the lock symbol asyou remove the battery.
Disassembling HP Mini 210 Back Case
© iFixit — CC BY-NC-SA es.iFixit.com Página 3 de 5
Paso 2
Slide the battery out from thenetbook.
Paso 3 — Disassembling HP Mini 210 Back Case
Turn the netbook to view its edge.
Press both orange eject buttonssimultaneously, and use a spudgerto pry off the back case.
Disassembling HP Mini 210 Back Case
© iFixit — CC BY-NC-SA es.iFixit.com Página 4 de 5
To reassemble your device, follow these instructions in reverse order.
La versión más reciente de este documento fue generada en 2017-12-18 07:06:42 PM .
Paso 4
If the back case does not separatefrom the netbook easily, use thespudger to pry off the back case bythe edge near the batterycompartment, and work your way tothe sides. The case will then pivotalong the front edge.
Paso 5
Pull the back case off from the frontedge.
Disassembling HP Mini 210 Back Case
© iFixit — CC BY-NC-SA es.iFixit.com Página 5 de 5