Upload
edgar-jordan
View
217
Download
1
Embed Size (px)
Citation preview
Disc Brakes
By: Peter J Conrad
Frederick William Lanchester
Born on Oct. 23, 1868, London, England
Lanchester produced the first British automobile, a one-cylinder, five-horsepower model, in 1896
In 1901, British inventor Frederick William Lanchester patented disc brakes
Disc Brakes
The disc brake or disk brake is a device for slowing or stopping the rotation of a wheel.
To stop the wheel, friction material in the form of brake pads is forced mechanically, hydraulically, pneumatically or electromagnetically against both sides of the disc.
Drum Brakes
They were called drum brakes because the components were housed in a round drum that rotated along with the wheel. Inside was a set of shoes that, when the brake pedal was pressed, would force the shoes against the drum and slow the wheel.
Drum brakes are still used in some modern cars because of some engineering and cost advantages
Downsides
When the drums are heated by hard braking, the diameter of the drum increases slightly due to thermal expansion of the material, this means the brakes shoes have to move farther and the brake pedal has to be depressed more.
If the surface overheats to the point where it becomes glazed the reduction in
braking efficiency is more permanent.