DMM Triple ATTAchMenT pulleys eFFicienTly V ers AT ileDMM combined a small rigging plate with a pulley and produced a highly efficient Triple Attachment Pulley. The hot forged attachment

DMM Triple ATTAchMenT pulleys

eFFicienTlyVersATile

FOr MOre inFOrMATiOn cOnTAcT DMM:

llAnBeris, GWyneDD, WAles uniTeD KinGDOM ll55 4el

TEL: +44 [0]1286 873 502

FAX: +44 [0]1286 872 090

EMAIL: [email protected]

WWW.DMMWALES.COM

DMM combined a small rigging plate with a pulley and produced a highly efficient Triple Attachment Pulley.

The hot forged attachment points enable creative configurations whilst allowing direct connection to textile components to save on weight and space.

Generic FeATures• ‘Textilefriendly’curves,highstrength,lowweight

• Riggingplatehelpsorganisesingleormultipleattachments

• Fairleadflareshelpmaintainhighworkingefficiency

• Roundedsideplatesedgesmaintainlowropeabrasionwhenropeisfed‘unfair’

• Compatiblewithmostcarabinershapesandmanytextileconnecting elements including rope and webbing

• Sizeofattachmentholesreduceprobabilityofunwantedrotationoflockingcarabiners

• Directconnectiontotextilecomponentsattheround edgedattachmentholes,helpingtoreducesystemcosts,increaseliftheight,minimisespacerequiredandenhancetolerance to torsion

• Sideplateshapeallowsanautoblockknottofunctionwhenthe rope approaches the sides as well as at the bottom of thepulley

• Tamperproofconstruction

• Individualserialmarking

• MadeinWales,UK

suGGesTeD AreAs OF ApplicATiOn• Rescue • FallProtection

• Treecare • Lightweightrigging

• Stretchersuspension • Temporaryhorizontallifeline

Guidance specific to tree climbing applications can be foundin‘TheHitchClimber’sGuidetotheCanopy’ at www.treemagineers.com/downloads.php

TechnicAl speciFicATiOns• CertifiedtoEN795B:1997[Transportabletemporaryanchor

devices].EN12278:1998[Pulleys].NFPA1983[06Ed]ClassLrating

• Sideplateshotforgedin2014T6aluminiumalloyforhighstrength to weight ratio

• Heattreated17-4PHstainlesssteelspindle

• Oilitebushingasstandardor6000-2RSseriesballbearinginRapide version

• AnodisedtoEN12373-1:2001Class10E1forcorrosionprotection

perFOrMAnce• TripleAttachmentPulley[PUL100RD/BLT&Rapide]

Minimumbreakingstrength:30kN

WorkingLoadLimit:6kN,Maxropediameter:14mm

Efficiency:PUL100[RED/BLT]:71%,PUL100[RAPIDE]:95%

DMM Triple ATTAchMenT pulleys

PUL100 [ReD oR BLT] PUL100RAPIDe [Ice BLUe]

Documents

DMM Triple ATTAchMenT pulleys eFFicienTly V ers AT ileDMM combined a small rigging plate with a pulley and produced a highly efficient Triple Attachment Pulley. The hot forged attachment