Upload
davsju
View
222
Download
0
Embed Size (px)
DESCRIPTION
Machine for roof
Citation preview
Item Description Comments
Pictures
Trapezoidal Rolling section
You can drag this pic to see it clearly, it’s the basic data for the sheet which is generated by the machine, you should check if it fulfill the requirement of your friend’s
Machine Double panel rolling machine YX15-180-90
type
Rack Loaded material up to 8t
Motor power
5.5 kw Again, for the motor, if your friend wants this machine, he has to tell me the voltage in his place, and then the price of the motor may change. This one is the ordinary one.
Hydraulic Motor
Power: 4 kw, Flux: 10L/min, Pressure: 20-25Mpa Also the motor is the ordinary one
Producing speed
12 -16m/min
Material of the cutting knife
Cr12
Material thickness
0.3-0.6mm The machine can make the sheet thickness between this range
Control system
Mitsubishi PLC & transducer380V three phases, 50Hz
Voltage 380V three phases
Size The main part contains 14 groupsThe entire machine:L*H*W=7800mmX1650mmX1600mm
Weight 5.2t
Wave Rolling section
This machine actually is like two machines overlap together, they work separately
Machine type
Double panel rolling machine YX15-75-900
Rack Loaded material up to 8t
Motor power
5.5 kw380V three phases
This one is the ordinary one.
Hydraulic Motor
Power: 4 kw, Flux: 10L/min, Pressure: 20-25Mpa380V
Producing speed
12 -16 m/min
Material of the cutting knife
Cr12
Material thickness
0.3-0.6mm The machine can make the sheet thickness between this range
Control system
Mitsubishi PLC & transducer380V three phases, 50Hz
Voltage 380V three phases
Size The main part contains 14 groupsThe entire machine:L*H*W=6800mmX1650mmX1600mm
Weight 5.6t
Machine cost ($)
35 000
Shipment cost (including the
This machine is like two machines, so it needs a big container, for more detail cost and other info, I can go to visit the supplier if your friend is interested to buy it
shipment in china and from china to port Arica)