H2-1V14.2

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C

Top Edge OptionsDrawer Boxes

Top Edge Options

TE1

Machined Edge

Price Per Top Edge Option TE1 TE2 TE3 TE4 TE5 TE6 TE7 TE10 TE11Deduct charge Per Box X X X XNo Deduct or Up-charge X XAdd charge Per Box XAdd charge Per Box XAdd charge Per Box X

Side

TE6

Machined Edge

Side

Front

TE7

Machined Edge

Side

Front

PVC Edgeband

TE10

Front

Side

Wood Veneer Edgeband

TE11

Front

Side

Front

TE2

Machined Edge

Side

Front

TE3

“Hand” Routed Edge

Applied After Assembly

Side

Front

TE4

Machined Edge

Side

Front

TE5

“Hand” Routed Edge

Applied After Assembly

Side

Front

Top Edge Options

H2-2V14.2.com

®® 99.9% American MadeC

Drawer BoxesTop Edge Options

Top Edge Option Notes

1)TE1 and TE2

Constructed with the sides being 3mm shorter than the front and back of the box (4mm on ¾" thick material for TE1)TE1 - all edges are eased, TE2 - all edges are square.When ordering, please give the height dimension using the size for the front and back.

2) TE3 Top edges are all flush and eased (except the face that attaches to the back of the drawer front).3) TE4 Top edges are flush and square on all sides.

4) TE5 Top edges are flush and radiused to form a half circle (except the face that attaches to the back of the drawer front). A slight flat spot appears on the top where the joint meets.

5) TE6 Top edges are flush for the most part and slightly eased on all sides.

6) TE7Top edges are constructed with the sides being 3mm shorter than the front and back of the box.When ordering, please give the height dimension using the size for the front and back.

7) TE10

Available for Melamine Drawer Boxes only.Top edge option is constructed with the front and back being 2mm shorter than the sides of the box and finished with a PVC edgeband.When ordering, please give the height dimension using the size for the sides.

8) TE11

Available for Plywood Drawer Boxes only.Top edge option is constructed with the front and back being 2mm shorter than the sides of the box and finished with a Veneer edgeband.When ordering, please give the height dimension using the size for the sides.