967

drylin® stainless steel

Lubrication free Temperature resistant up to +250°C Corrosion resistant Chemical resistant Standard parts with quick delivery

R J U M-01-12-ES

RJUM-01-12-ESRJUM-01-16-ESRJUM-01-20-ESRJUM-01-25-ESRJUM-01-30-ES

RJUM-01-12-ESRJUM-01-16-ESRJUM-01-20-ESRJUM-01-25-ESRJUM-01-30-ES

JUM-11 XUM-01 E7UM-01

968 969

drylin® stainless

steel

3D-CAD files, prices and delivery time www.igus.eu/drylinESLifetime calculation, configuration and more www.igus.eu/drylinES

Machine parts made from stainless steel are designed to survive in the worst environments. Heat, pressure, seawater, liquid and gaseous media like detergents and other chemicals. If these machine parts also have to work as a bearing, the combination with iglidur® high-performance polymers is ideal. All bearings are lubrication free and the plastic parts are secured axially and radially in the housings with positive fit.

The suitable iglidur® material can be selected according to the application and used for linear and/or rotary motions.

Lubrication free Temperature resistant up to +250°C Corrosion resistant Chemical resistant Cost-effective

Industries and application areas: Food and bottling industry Meat processing Harbour and crane facilities Yacht building Chemical industry Electroplating industry Medical and rehabilitation technologies Packaging industry

The use of 1.4571 and 1.4301 makes of the guides resistant to seawater and chemical con-tact corrosion, and the guide shafts are also made from 1.4571. Despite the lack of surface hard-ness, required for instance by recirculating ball bearings, they are suitable for use with plain bear-ings. The large bearing surface of a plain bearing reduces the surface pressure to a quite safe value.

Lubrication freedom with drylin® for a baking and conveyor unit

drylin® W guide rails are accredited to Cleanroom-standards and therefore used in this blister machine.

drylin® stainless steel | Advantages drylin® R plain bearings | Product range

d2d1

s

BB1

dn

Part No. Shaft Tolerance78) bearing inner Ø

F max. dynamic82)

F max. static82)

WeightØ

P = 5 MPa P = 35 MPa

[mm] [mm] [N] [N] [g]

12 +0.030 +0.088 960 6,720 6016 +0.030 +0.088 1,440 10,080 8420 +0.030 +0.091 2,250 15,750 14725 +0.030 +0.091 3,625 25,375 32430 +0.040 +0.110 5,100 35,700 486

Part No. d1 d2 B B1 s dnh7 h10 H10 H10 h10

12 22 32 22.6 1.30 20.516 26 36 24.6 1.30 24.220 32 45 31.2 1.60 29.625 40 58 43.7 1.85 36.530 47 68 51.7 1.85 43.5

Technical data

Dimensions [mm]

Closed stainless steel adapter made from 1.4305

Dimensions corresponding to the standard for recirculating ball bearings

78) According to igus® testing method Page 92482) Design standards Page 878Please note: Installation instructions Page 879

Also available with the following liners:

Size Option

Order key

Clo

sed

iglid

ur® J

Sta

ndar

d

Inne

r Ø

Met

ric

Line

r

Sta

inle

ss

stee

l

Type

WS-10-40-ES-FG

WJUM-01-10-ES-FG59)

WJUM-01-16-ES-FG59)

WJUM-01-20-ES-FG59)

WJUM-01-25-ES59)

WS-10-ES-FGWS-16-ES-FGWS-20-ES-FGWS-25-ES

WS-10-ES-FGWS-16-ES-FGWS-20-ES-FGWS-25-ES

WS-10-40-ES-FG

WJ200UM(T)-... WJ200UME-... WJUM-..-ES-FG WJRM-... iglidur® J iglidur® E7 iglidur® A180

970 971

drylin® stainless

steel

drylin® stainless

steel

3D-CAD files, prices and delivery time www.igus.eu/drylinESLifetime calculation, configuration and more www.igus.eu/drylinES

Single rail round, made from stainless steel V4A Round double rail and housing bearing, made from V4A stainless steel

59) alternative with XUMO-01-... liners for high temperatures available. Part No. WXUM-01-...

Part No. C4 C5 C5 C6 C6 K1 for screwmin. max. min. max.

DIN 912

120 20 79.5 20 79.5 M6

Technical data and dimensions [mm]

Part No. Weight B C1 C3 A3 K2 K3 Stat. load capacity Countersunk

head screwCoy Coz+ Coz-

[g] [N] [N] [N]

57 26 29 16 6.5 M6 M5 3,800 3,800 950134 34.5 36 18 9 M8 M6 6,900 6,900 1,450280 42.5 45 27 9 M8 M6 11,000 11,000 1,900564 52.5 58 36 11 M10 M8 16,000 16,000 3,600

57) Height dimension minus the bearing clearance tolerance58) Plain holes

Part No. Weight H57) da L a h h1 h2 G1 G2 A1 Q1 Q2±0.25 -0.1 max. –0.3

[kg/m]

0.87 18 10 3,000 27 5.5 5.5 9 27 17 16.5 - -2.22 27 16 3,000 27 12 4.5 14 33 19 25 32 283.37 36 20 3,000 27 16 8 20 38 21 30 37 375.21 45 25 3,000 32 11.5 5.5 25 46.5 25.5 37.5 45.5 46

Part No. C4 C5 C5 C6 C6 K1 for screw

ly lz Wby Wbzmin. max. min. min.

DIN 912 [mm4] [mm4] [mm3] [mm3]

120 20 79.5 20 79.5 M658) 491 491 98 98120 20 79.5 20 79.5 M8 3,217 3,217 402 402120 20 79.5 20 79.5 M8 7,854 7,854 785 785150 25 99.5 25 99.5 M10 19,175 19,175 1,534 1,534

Part No. Weight H57) da L a b h h2 A A2[kg/m] ±0.25 h9 max. –0.3

1.58 18 10 3,000 40 40 5.5 9 73 60

Can be combined with: Suitable liner materials

57) Height dimension minus the bearing clearance tolerance

drylin® W | Profile guides | Product range drylin® W | Profile guides | Product range

Size 10-20Material for housing and shaft support 1.4408 (AISI 316)Shaft material 1.4571 (AISI 316Ti)Size 25Material for shaft, shaft support, housing 1.4571 (AISI 316Ti)

K3

! Coz-

z

yx

da

C6 C4 C5

K1

a

b

h H

K2

L

h2

C3

C1

B

A2

A

A3

K3

! Coz-

z

yx

da

C6 C4 C5

K1

a

b

h H

K2

L

h2

C3

C1

B

A2

A

Technical data and dimensions [mm]

Technical data and dimensions [mm]

Housing bearing round, made from of stainless steel V4A

Material for housing and shaft support 1.4408 (AISI 316)Shaft material 1.4571 (AISI 316Ti)Size 25Material for shaft, shaft support, housing 1.4571 (AISI 316Ti)

K1

K3

! Coz- ! Coz-

C3

C1

A3

G1

G2

C5 C4 C6

L

K2 B

A1 a h1

h h2 H

da

Q1

Q2

K1

K3

! Coz- ! Coz-

C3

C1

A3

G1

G2

C5 C4 C6

L

K2 B

A1 a h1

h h2 H

da

Q1

Q2

E W M - 06 - 2000

EWM-0688)

EWM-0888)

EWM-1088)

EWM-12EWM-16EWM-20EWM-25EWM-30EWM-40EWM-50

EEWM-06EEWM-08EEWM-10EEWM-12EEWM-16EEWM-20EEWM-25EEWM-30EEWM-40EEWM-50

EWMR-10EWMS-10EWMR-12EWMR-16EWMR-20EWMS-20EWMR-25EWMR-30

972 973

drylin® stainless

steel

drylin® stainless

steel

3D-CAD files, prices and delivery time www.igus.eu/drylinESLifetime calculation, configuration and more www.igus.eu/drylinES

Part No. d Weight Max. length Effective hardness depth[kg/m] (with 1.4125)

06 0.222 3,000 0.808 0.359 4,000 0.910 0.617 4,000 0.912 0.888 6,000 1.016 1.578 6,000 1.220 2.466 6,000 1.625 3.853 6,000 1.830 5.549 6,000 2.040 9.865 6,000 2.250 15.413 6,000 2.4

Part No. d Weight Max. length Effective hardness depth[kg/m] (with 1.4034)

06 0.222 3,000 0.808 0.359 4,000 0.910 0.617 4,000 0.912 0.888 6,000 1.016 1.578 6,000 1.220 2.466 6,000 1.625 3.853 6,000 1.830 5.549 6,000 2.040 9.865 6,000 2.250 15.413 6,000 2.4

Part No. d Weight Max. length[kg/m]

10 0.617 4,00010 0.617 4,00012 0.888 6,00016 1.578 6,00020 2.466 3,00020 2.466 6,00025 3.853 6,00030 5.549 6,000

Materials 1.4125, 1.4034, 1.4301, 1.4571

Completely supported and mounted with standard aluminium support

For supported shafts: Shaft support supplied in lengths of 600 mm max. Standard pitch T2, T1 also possible on request

Hole pitches symmetrical C5 = C6

Stainless steel shafts

Dimensions [mm] – hardened stainless steel 1.4125

Dimensions [mm] – hardened stainless steel 1.4034

Dimensions [mm] – stainless steel 1.4301 (EWMR) or 1.4571 soft stainless steel (EWMS)

88) Material X90 (1.4112)

Size

Order key

Type

Available shaft materials:Stainless steel (1.4125 or 1.4112), hardened/ground

EWMStainless steel (1.4034), hardened/ground EEWMStainless steel (1.4301), drawn EWMRStainless steel (1.4571), drawn EWMS

Sha

ft le

ngth

[mm

]

Met

ric

Out

er Ø

Sta

inle

ss s

teel

sha

ft

Order example: EWM-16-500 corresponds to a stainless steel shaft 16 mm Ø 1.4125, 500 mm in length

Options

drylin® shafts | Product range drylin® shafts | Product range

EWUM EWUMN

E W U M - ES - 20 - 2000

EWUM(S)-ES-12 / ...-T1EWUM(S)-ES-16 / ...-T1EWUM(S)-ES-20 / ...-T1EWUM(S)-ES-25 / ...-T1EWUM(S)-ES-30 / ...-T1EWUM(S)-ES-40 / ...-T1

EWUM-12EWUM-16EWUM-20EWUM-25EWUM-30EWUM-40EWUM-50

EWUMN-12EWUMN-16EWUMN-20EWUMN-25EWUMN-30EWUMN-40EWUMN-50

974 975

drylin® stainless

steel

drylin® stainless

steel

3D-CAD files, prices and delivery time www.igus.eu/drylinESLifetime calculation, configuration and more www.igus.eu/drylinES

Part No. Shaft material

D B H V d1 E ¯ F G T C5/C6 T C5/C6h6 ±0.02 for EW...-ES for EW...-ES -T1

EWUM EWUMS min. max. min. max.

1.4125 1.4571 12 40 22 5 4.5 29 – 5.8 14 120 20 79 75 20 571.4125 1.4571 16 45 26 5 5.5 33 – 7.0 16 150 20 94 100 20 691.4125 1.4571 20 52 32 6 6.6 37 50° 8.3 20 150 20 94 100 20 691.4125 1.4571 25 57 36 6 6.6 42 – 10.8 25 200 20 119 150 20 791.4125 1.4571 30 69 42 7 9.0 51 – 11.0 25 200 20 119 150 20 941.4125 1.4571 40 73 50 8 9.0 55 – 15.0 25 300 20 169 200 20 119

TC5 C6

G

E

D

V H

B

Ød1

F

(ϒ )

Part No. D B H V N1 N2 d1 M (º) E T187) C5/C6 T2 C5/C6 Weightmin. max. for T2 min. max.

±0.02 ±0.15 for T1 Standard Standard

[kg/m]

12 40 22 5 8.0 5.0 4.5 5.8 50 29 75 20 57 120 20 79 1.7516 45 26 5 9.5 6.0 5.5 7.0 50 33 100 20 69 150 20 94 2.6420 52 32 6 11.0 6.5 6.6 8.3 50 37 100 20 69 150 20 94 3.9725 57 36 6 14.0 8.5 6.6 10.8 50 42 120 20 79 200 20 119 5.6530 69 42 7 17.0 10.5 9.0 11.0 50 51 150 20 94 200 20 119 7.9340 73 50 8 17.0 10.5 9.0 15.0 50 55 200 20 119 300 20 169 12.8850 84 60 9 19.0 12.5 11.0 19.0 46 63 200 20 119 300 20 169 19.60

Part No. d H H1 A A1 A2 d1 d2 T C5/C6 Weight±0.02 ±0.02 min. max. [kg/m]

12 14.5 3 11 5.5 5.4 M4 4.5 75 20 57 1.6216 18 3 14 7.0 7.0 M5 5.5 75 20 57 2.5420 22 3 17 8.5 8.1 M6 6.6 75 20 57 3.8125 26 3 21 10.5 10.3 M8 9.0 75 20 57 5.6230 30 3 23 11.5 11.0 M10 11.0 100 20 69.5 7.6340 39 4 30 15.0 15.0 M12 13.5 100 20 69.5 13.4750 46 5 35 17.5 19.0 M14 15.5 100 20 69.5 20.31

N1 (°) E B

ød1

MD

145°

V

H

N2

C5 T1/T2 C6

N1 (°) E B

ød1

MD

145°

V

H

N2

C5 T1/T2 C6

TC5 C6

G

E

D

V H

B

Ød1

F

(ϒ )

Supported stainless steel shafts

Dimensions [mm] – supported stainless steel shafts 1.4125

87) Pitch T1 on request; standard is T2

Dimensions [mm] – low level supported stainless steel shafts 1.4125

Low level supported shafts are delivered unmounted.

Partially supported stainless steel shafts

Dimensions [mm]

Par

tially

sup

port

ed

stai

nles

s st

eel s

haft

s,

met

ric

Type

Shaft support blocks for Ø 20 mm made from stainless steel VA

Connecting dimensions as standard supports made from aluminium

Available materials and shafts: 1.4125, max. 6.000 mm EWUM 1.4571, max. 3.000 mm EWUMS

Order example: EWUMN-16-500 corresponds to a low level supported stainless steel shaft (1.4125) 16 mm Ø, with length of 500 mm

Order example: EWUM-ES-20-500 for a partially supported stainless steel shaft, outer Ø 20 mm with length of 500 mm

Sha

ft le

ngth

[mm

](H

ole

patte

rn)

OptionsSize

Out

er-Ø

drylin® shafts | Product range drylin® shafts | Product range

Order key

SHTC - 20 - EWM - HYDSLW - ESJ - 1040

SLW-ES-1040SLW-ES-2080

SLW-ES-1040SLW-ES-2080

SLW-ESJ-1040

SLW-ESX-1040SLW-ESA180-1040SLW-ESJ-2080SLW-ESA180-2080

A Al H E1 E2 I R f It ts d T I2 d2 ha–0,3 –0,3 ±0,15 ±0,15

SHTC-20-EWM-HYD

976 977

drylin® stainless

steel

drylin® stainless

steel

3D-CAD files, prices and delivery time www.igus.eu/drylinESLifetime calculation, configuration and more www.igus.eu/drylinES

drylin® SLW | Product range | Trapezoidal thread

Part No. A AI H E1 E2 E3 l hw f lt tk ts tg–0.3 –0.3 ±0.15 ±0.15 ±0.15 ±0.1

74 100 29 60 60 87 144 24 1.5 22 11 6.8 M8134 150 46 116 116 132 206 44 1.5 28 15 8.6 M10

Part No. kt s sk sg kq d T l2 d2 ha±0.1 Standard

6.4 6.6 9.5 M6 4.4 10 Tr10x2 17 Tr10x292) 14.58.6 9.0 14 M8 5.5 20 Tr18x4 26 12h9 23.0

Part No. Shafts-Ø Max. stroke length

Weight Additional (per 100 mm)

Max. static load capacity

[mm] [mm] [kg] [kg] axial [N] radial [N]

10 750 1.4 0.2 700 2,800

10 750 1.4 0.2 700 2,80010 750 1.4 0.2 700 2,80020 1,000 5.7 0.64 1,600 6,40020 1,000 5.7 0.64 1,600 6,400

SLW-ES – stainless steel

Dimensions [mm]

Technical data

Stainless steel version with corrosion-resistant steel components (1.4305, 1.4408 or 1.4571)

Choice of bearing material: iglidur® J = Standard iglidur® A180 = FDA iglidur® X = High temperature up to +250 °C

Available accessories Page 1113

92) Lead screw end unmachined

SHTC-HYD can be assembled using the following bearing materials:

iglidur® J

Standard up to +90 °C

iglidur® X

For temperatures up to +250 °C and

high chemical resistance

iglidur® A180

For applications with food contact (FDA)

Part No. A Al H E1 E2 I R f It ts d T I2 d2 ha–0.3 –0.3 ±0.15 ±0.15

130 35 48 108 115 108 72 2 36 9.0 20 Tr18x4 26 12 h9 23

SHTC-HYD – hygienic design

Dimensions [mm]

Based on the “hygienic design” idea, this version offers an easily cleaned solution. The screw connections are raised with no dirt traps, and any gaps are intentionally wide. The materials used are plastic and VA stainless steel.

The lead screw unit can be supplied completely with FDA-compliant materials.

Available accessories Page 1113

drylin® SHT | Product range | Trapezoidal and high helix thread

I + stroke

Type

: flex

ible

Com

pact

TypeType

Hyg

ieni

c de

sign

OptionShaftSize Size

Sha

ft m

ater

ial

Inst

alla

tion

size

Inst

alla

tion

size

iglid

ur® J

bea

ring

Sta

inle

ss s

teel

Order keycomplete Page 1080

Order keycomplete Page 1094

Td

l + stroke

SLW-XY-ESJ-1040

SLW-XY-ESJ-1040

978

drylin® stainless

steel

Lifetime calculation, configuration and more www.igus.eu/drylinES

drylin® SLW | Product range | Cross slides

Part No. sg d T l1 d1 d1 l2 d2 d2 ha1 ha2 WStandard Alternative Standard Alternative ha2–

ha1M6 10 Tr10x2 17 Tr10x2 6 h9 17 Tr10x2 6 h9 14.5 33.5 19

SLW-XY-ES – compact XY-table – stainless steel

For manual adjustments Flat and compact High torsional stability stiffness Structure entirely made from VA and V4A stainless steel materials

100 % lubrication free Chemical and corrosion resistant Available accessories Page 1113

Dimensions [mm]

Dimensions [mm]

The hand wheel can be ordered left- or right-mounted in the y-direction.Left: SHT-XY-ESJ-1040-L-200-300 for 200 mm stroke length on the x-axis and 300 mm on the y-axisRight: SHT-XY-ESJ-1040-R-200-300 for 200 mm stroke length on the x-axis and 300 mm on the y-axis

Part No. Max. stroke length

[mm]

A Al H E1 E2 Base length

Base length

f lt tk ts tg kt

–0.3 ±0.15 ±0.15 lx ly ±0.1

300 74 73 48 60 60 117 117 1.5 22 11 6.8 M8 6.4

L R

x

y

L R

x

y

AIA

lx + Stroke in mmright

L R

x

y

AIA

ly + Stroke in mm

left

Order key Page 1094