Duma Optronics CompaDuma Optronics: Electro-Optical and Laser Instrumentation Technologyny Presentation 6-15-14

8/12/2019 Duma Optronics CompaDuma Optronics: Electro-Optical and Laser Instrumentation Technologyny Presentation 6-15-14

1/22

Company presentation

Duma Optronics Ltd. 2005 All rights Reserved
mailto:[email protected]


2/22


Introduction

Duma Optronics is a wel l establ ished and rapid ly grow ing

company s pecial izes in Electro-Opt ical and laser

inst rumentat ion technology.

The company was established in 1989by a group of researchers to

serve the Optronics industry with innovative products. Duma

Optronics currently employs 25 employees, most of them areengaged in R&D, and includes specialists in optical design, E-O

systems, electronic signal processing and computerized imaging.

The company is privately owned.

in


3/22

Introduction [cont.


.

Duma Optronics is located in Nesher, near Haifa bay Israel

Duma Optronics products are distributed worldwide by leading OEM companies in the

electro-optics market. as well as by local distributors in Europe, USA and Asia.


4/22

Copyright Duma Optronics Ltd. 2005 All rights Reserved

High Power Beam Analysis

Electronic Autocollimator

Positioning & AlignmentBeam Analysis

Main product lines


5/22


Positioning & Alignment

Measures beam position. Variety of models based on

CCDs, CMOS, Lateral-Efect or Four-Quadrant PSDs.

Analog version up to 60KHz. Digital: USB/Stand Alone

versions. Wide spectral range. Large detection area

available.

SpotOn family

Alignment compact laser, pointing stability

less than 1Rad and divergence less than

9.5mRad. Built-in screws for fine beamdirection adjustment. Battery/Power supply

operated

Simultaneous measurements of laser beam deviationswith respect to the housing (Angle) and of beam power.A variety of models including PSDs and CMOS typedetectors.Wide aperture models available with various lens types.

Simultaneous measurements of Position,

Angular and Power displacements.

Position accuracy down to 1m, angle

accuracy down to Rad range.

LaserOn

AlignMeterAngleMeter

Positioning and Alignment

main products


6/22

SpotOn FamilySpotOn CCD

SpotOn USB

SpotOn compact

Dum Spot L-44 SpotOn ANALOG-USB

SpotOn Mobile


7/22Duma Optronics Ltd. 2005 All rights Reserved

Simultaneous measurement of both position and angle deviation.

Complete system, including a USB2.0 attachment, a measuring

head composed of two Lateral Effect PSD's assembled to a

calibrated beam splitter assembly, including: a beam splitter, a

collimated lens and a lens tube, and a software package forWindows.

Windows 2000/ XP/ W7

A variety of sensor heads which differ from each other mainly by

the lens focal length. The standard configuration is f=100mm,

other common combinations are f=50mm and f=200mm.

Highlight product: Sophisticated solution for accurate alignmenttasks

AlignMeter
http://www.youtube.com/watch?v=chH1HH8mN9Imailto:[email protected]



Electronic Autocollimator

Main Applications:

CD/DVD ROM alignment

Measurement of wedge, prism and polygon angle

Measurement of reflecting surface parallelism

Measurement of surface flatness

Alignment of optical setups

Machine alignment

Thermal stability measurements

Straightness measurement of linear stages

Characterization of rotation stage

Measurement of mirror angle

Vibration analysis



Electronic AutocollimatorSpecifications:

Autocollimator [spec.]

- Light Source

Autocollimator 42' (H) (2520 sec of arc)Telescope 84' (H) (5040 sec of arc)

Resolution 0.1sec

Accuracy 2.5 sec

CCD 1/2" (1/3)Light source LED

Interface USB 2.0

Aperture 36 mm

Integral adjustable mechanics

Built in alignment laser
http://www.youtube.com/watch?v=L7ZQs1-yLoghttp://www.youtube.com/watch?v=L7ZQs1-yLoghttp://www.youtube.com/watch?v=L7ZQs1-yLogmailto:[email protected]



Beam Analysis

Measures microscopic beams of less than 0.5m, both

CW and pulsed beams.

Interface: USB2.0 .

A CCD beam profiler having a wide spectral range,

measures CW or pulsed beams. Extensive analysis of

laser beam parameters. Interface: USB2.0.

Multiple knife-edge Beam profiler.High accuracy. Wide spectral

range. High resolution.

Down to 2 m size

General beam profiler for projected laser

beam measurements

1.4 Mega p ixel CCD Beam Prof i ler

12 Bit resolut io n

Beam Analyzer stand alone Touch

Beam Analyzer

BeamOn

Beam

BeamOn HR AFW

BeamOn Long Bow

Beam Analysis main products



Complete system for Laser Beam Analysis,

composed of a CCD camera head, a set of

3xNG Schott colored filters (NG4, NG9, NG10)

in housing, a PCI card or a USB 2.0

attachment, software on CD disk, carrying case,user manual. Select PC interface when

ordering.

Expanding your Profiling Capabilities

BeamOn


12/22

BeamOn HR1.4 Mega pixel CCD Beam Profi ler 12 Bit reso lut ion

A complete test station measuring Profile,

Power and Position, both for CW and Pulsed

beams. Based on a USB 2.0 interface for

notebooks.

Offered with a complete set for larger beamsand high power attenuation. The system comes

with a camera, Filter wheel, a standard USB 2.0

cable, a post, a set of 3xND filters in housing,

power supply 6V DC, software on CD disk and

carrying case.

New: BeamOn HR Automatic

Motorized FW

New: Beam on HR 1550: A camera

for 1550nm+/50nm
http://www.youtube.com/watch?v=jLH6tsR75fI


13/22

BeamOn 2/3

The BeamOn 2/3 CCD system is a beam diagnostics measurement system for

real-time measurement of continuous or pulsed laser beams.

The 2/3 CCD sensor allows it to cover a larger beam size

with an active area of:

8.5mmX6.35mm, and pixel

size of 11.6mx11.2m.

It provides laser beam parameters, such as: beam width,

shape, position, power, and intensity profiles.

The BeamOn 2/3 is based on a USB attachment,

run on Windows XP/2000/ 7 (32 & 64 bit).



BeamOn Long-bow

- Measures general light beams like: solar beams projected from remote

- General beam profiler for projected laser beam measurements

- Measurement of UV beam through wavelength conversion

- Measurement of beam wondering

Applications

BeamOn Long-Bow



Long-bow [cont.]Specifications

- Spectral range 3501310nm- Zoom ratio X25 optical, X2 digital

- Electronic shutter 1/31/10000 sec

- Gain: software controllable

- USB2.0 interface

- Electronic shutter controllable by computer

- Angle of view 45wide-end to 2tele-end

- Minimum working distance 800mm tele-end

- Signal to noise ratio 50 dB

- Frame rate 25 Hz

- Filters included: 3 optical filters 1/8, 1 ND filter 1/400

BeamOn Long-Bow[cont.]



The analyzer for microscopic beams

Beam Analysis

The Beam isbeam diagnostics measurement system for

real-time measurement and display of small CW

or pulsed lasers in the sub-micron range, fiber optic and

laser diode beam profiles.

Main features include: measure beam of less than

0.5m (FWHM),

handles CW or pulses, having a long working distance,

using a high resolution CCD response range, optical

zooming for fast beam finding

It is running under Windows 2000 or XP, Vista and Win7,via the USB port.

Beam



Multiple Scanning Knife Edge Beam Profiler

Beam Analysis

Patented Technology: Unique tomographic image

reconstruction of 2D/3D images

Versatile: measure beam profile, beam size, beam shape,

position and power.

Flexible: Wide spectral range, from 190nm through 1800nm

Accurate: Beam sizes from 3m to 9mm with 0.1m resolution

Based on USB 2.0 interface

New: 12 bit A/D

New: IR Enhanced detector (E)12002700nm

Beam Analyzer


18/22

Beam Analyzer Touch

Stand alone version of Beam Analyzer with Touch screen and Windows7


19/22

High Power Beam Analysis

product line

Article
http://www.industrial-lasers.com/articles/print/volume-28/issue-5/features/high-power-beam-analysis.htmlhttp://www.youtube.com/watch?v=0U5Dlk4WPVAhttp://www.industrial-lasers.com/articles/print/volume-28/issue-5/features/high-power-beam-analysis.html


20/22

Beam Analyzer High Power BeamOn High Power

SpotOn High Power


21/22

SoftwareThe unit provide horizontal and vertical profiles in 2D and 3D, Beam size, beam position and Power measurement.


22/22

Thank You for Your Time and Your Attention!

Duma Optronics Ltd.

1st Hazait street

POB 3370 Nesher

20306 Israel

Tel: 972-4-8200577

Fax: 972-4-8204190

www.duma.co.ilWebsite:

[email protected]:-E

Contact information
http://www.duma.co.il/mailto:[email protected]:[email protected]://www.duma.co.il/mailto:[email protected]://www.duma.co.il/

Documents

Duma Optronics CompaDuma Optronics: Electro-Optical and Laser Instrumentation Technologyny Presentation 6-15-14