Embed Size (px)
Citation preview
Durometers & StandsSmall Dial Durometer
Durometer Stand
Compliance withISO 7619 and ASTM D2240
J typeDigitalDurometer
Pocket type
Pocket type forsoft thin sheet
GS-615(Manual type)
GS-610(Electric type)
J2 typeDigitalDurometer
Total Length: 88.4mmWeight: 125gGS-719P(for natural rubber etc.)GS-709P(for soft plastic etc.)Strap can be put for easy carryand convenience
Total Length: 88.4mmWeight: 125gGS-779Gcan be used from 2.5mm thicksheets and for comparativehardness measurement
Quick and simple measurementwith ISO standard load
This is Automatic Constant Loaddurometer stand. The load andspeed are set with standardand measurement can bedone by touch button
Digital/Dial Durometer for using with Durometer stands
Pressure Foot: φ18mmGSD-719J-R Digital type AGSD-720J-R Digital type DGS-719R Dial type AGS-720R Dial type D
2010 Edition of New Products
Peak data holdfunction typeGraduation : 0.5GSD-719J(type A)GSD-720J(type D)18models are availableaccording to standards
Data hold function typeGraduation: 0.4GSD-719J2(type A)GSD-720J2(type D)15 models are availableaccording to standards
18ｍｍ
Compliance with ISO 7619 and ASTM D2240
Alignmentunit
The installation ofthe strap (option)is possible
Pressure Foot
Automatic Durometers
Dial Indicators
Thickness Gauges
Dial Test Indicators
One RevolutionDial Indicator
Auto-ReverseDial Test Indicator
Auto-Reverse Dial Test Indicatorlower measuring force series
GX-01 seriesAutomatic HardnessMeasuring SystemResolution: 0.1Output: RS-232CGX-01A(type A)GX-01D(type D)Compliance with ISO 7619, ASTM D2240 etc.,and can be used by interchangeableSensors. Peak hold, Timer hold, Tolerancejudgment and middle value measurementare applicable
GS-680 IRHD M-methodFull AutomaticMicro DurometerCompliance with ISO 48 Resolution: 0.1 IRHDMeasuring Accuracy: ±0.01 IRHDCan be applied for hardness measurementof O-ring, Rubber Sheet, small rubberparts etc. Data management can bedone through PC
2-10-3 Naruta-cho Okaya-shi NaganoPref. 394-0042 Japan TEL : 81-266-22-4911 FAX : [email protected] http://www.teclock.co.jp/eng_index.html
Head office & Factory
2010 Edition of New Products
TM-35-04Small type Dial Indicatorwith 26mm stem lengthwhich can be used formeasurement at deepposition or placeGraduation: 0.01mmMeasuring Range: 5mm
TM-35-03Small type Dial Indicatorwith 15mm stem lengthwhich can be fixed withJigs etc. ,certainlyGraduation: 0.01mmMeasuring Range: 5mm
SM-125Graduation: 0.01mmMeasuring Range: 20mmMeasuring Deep: 200mm
LT-352-5 LT-353-5 LT-355-10 LT-358-15Graduation: 0.01mm 0.01mm 0.002mm 0.001mmMeasuring Range: 0.8mm 0.8mm 0.28mm 0.20mmMeasuring Force: 0.05N or less 0.05N or less 0.1N or less 0.15N or less
Small Dial Indicator
LT-353-5 LT-355-10 LT-358-15LT-352-5
LT-354Wide graduation typeGraduation: 0.01mmMeasuring Range: 0.5mm
TM-980.1mm one revolutionDial IndicatorGraduation: 0.1mmMeasuring range: 3.2mm
It can stand on its own with stand
Ⓑ10.10.2000
