-
7/30/2019 Dwl 3200ap Qig en Uk
1/8
-
7/30/2019 Dwl 3200ap Qig en Uk
2/8
2 D-Link Systems, Inc.
DWL-3200AP Install GuideSystem Requirements
D-Link AirPremierTM DWL-3200APManaged Wireless Access Point
Using a power adapter with a different
voltage rating will damage and void thewarranty of this
product.
Power Cord Power over Ethernet base unit
Ethernet Cable
Power Adapter-DC 48V, 0.4AMounting Plate
CD-ROM with Manual
System Requirements:Minimum System Requirements:
CD-ROM Drive
Computers with Windows, Macintosh, or Linux-based operating
systems
Installed Ethernet Adapter Internet Explorer version 6.0 or
NetscapeNavigator version 7.0 and above
Package Contents
-
7/30/2019 Dwl 3200ap Qig en Uk
3/8
D-Link Systems, Inc. 3
DWL-3200AP Install Guide Installing the Hardware
Installing the Hardware
Step 1
Step 2
Connect one end of an Ethernet cable
(included with your package) to theLAN port on the DWL-3200AP
and theother end of the Ethernet cable to theport labeled P+DATA
OUT on the PoEbase unit.
Connect another Ethernet cable fromthe DATA IN port on the PoE
base unit
to your router/switch or to a PC.
Attach the power adapter to the connectorlabeled POWER IN on the
PoE base unit.
Attach the power cord to the power adapterand into an electrical
outlet.
Step 3
-
7/30/2019 Dwl 3200ap Qig en Uk
4/8
4 D-Link Systems, Inc.
DWL-3200AP Install GuideThe Setup Wizard
Open your Web browserand type http://192.168.0.50into the URL
address box.Then press the Enter orReturn key.
Click Run Wizard
The logon pop-up screen willappear.
Type admin
for the username and leavethe password field blank.
Once you have logged in, theHome screen will appear.
Using the Setup Wizard
-
7/30/2019 Dwl 3200ap Qig en Uk
5/8
D-Link Systems, Inc. 5
DWL-3200AP Install Guide The Setup Wizard
You will see the followingscreens.
Click Next
Step 1 - Setup your newpassword. You have theoption to establish
a password.
Click Next
Step 2 - Set Wireless LANConnection.
By default theDWL-3200AP SSID is settodefault with a
Channelsetting of 6.
For802.11g networks pleasedo the following:
Click Next
-
7/30/2019 Dwl 3200ap Qig en Uk
6/8
6 D-Link Systems, Inc.
DWL-3200AP Install GuideThe Setup Wizard
For 802.11g networks please
continue as follows:
Click Next
Click Restart
Your Setup is complete!
Step 3 - Encryption
The DWL-3200AP is capable ofthree levels of wireless
encryption:64-, 128-, 152-bit, using eitherHexadecimal or ASCII key
type.By default encryption is disabled.You can change the
encryption
settings for more secure wirelesscommunication.
-
7/30/2019 Dwl 3200ap Qig en Uk
7/8
D-Link Systems, Inc. 7
DWL-3200AP Install Guide The Setup Wizard
When you have completed the steps in this Quick Installation
Guide,your connected network should look similar to this:
Your Setup is Complete!
-
7/30/2019 Dwl 3200ap Qig en Uk
8/8
8 D-Link Systems, Inc.
DWL-3200AP Install GuideNotes
Technical SupportD-Links website contains the latest user
documentation and softwareupdates for D-Link products.
D-Link provides free technical support for customers within the
United Statesand Canada for the duration of the products warranty
period.
U.S. and Canadian customers can contact D-Link Technical Support
throughour website or by phone.
United StatesTelephone
(877) 453-5465Monday to Friday 6:00am - 6:00pm
World Wide Web
http://support.dlink.com
E-mail
[email protected]
CanadaTelephone
(800) 361-5265
Monday through Friday, 7:30am to 12:00am EST.
World Wide Web
http://support.dlink.ca
[email protected]
Version 1.0
Revised 01/21/05
2004 D-Link Systems, Inc. All rights reserved. Trademarks are
the property of their respective holders. Software
andspecifications subject to change without notice.
