DX SYSTEM - Aereco

DX SYSTEM

HEAT RECOVERY, DEMAND CONTROLLED VENTILATION SYSTEM

2 AERECO – DX system

DX SYSTEMA COMPLETELY NEW HEAT RECOVERY VENTILATION RANGEBased on the large experience in demand-controlled ventilation, Aereco introduces several new innovative heat recovery ventilation systems providing room by room airflow control.

These products are dedicated to residential applications and can be either installed in false ceiling, thanks to a small thickness, or in kitchen cupboard, due to optimized dimensions.

Best energy efficiency

In terms of control strategy, DX System is composed of 4 versions starting by the most performant - “Excellence”, ensuring individual room-by-room air supply and exhaust control, down to simpler versions such as “Premium”, “Evolution” and “Reference”. It makes the range scalable and adaptable precisely to the needs of each user.

The DX System optimally uses the exhaust heat to preheat the fresh air and thus offers an energy-efficient solution, whatever the version. Moreover, the demand-controlled management enables to scientifically reduce the electrical consumption of the system. The best energy-efficiency class A+ is achieved by three versions of the DX System.

Comfort and Indoor Air Quality at their best

The DX System enhances indoor comfort by providing healthy air, at a milder temperature, preheated by the integrated heat exchanger. To feel good at home, the “Excellence” and “Premium” versions, adapt, at any time, airflows to the occupants needs in every room based on the sensor’s inputs (CO2 or presence). The demand control strategy specific to the DX System follows two main purposes: to reduce inherent noise from the heat recovery system while guaranteeing the best Indoor Air Quality. Besides, in order to maximize the filters life-time, their dimensions and filtration surface have been optimized to prevent from outdoor particles.

Touch screen or control modules for visualization, setup and diagnosis

A colour LCD touch screen, supplied with “Excellence” and “Premium” allows the occupant to view system parameters, to diagnose operation, to control setups such as automatic bypass temperature, to boost ventilation or to action a free cooling on demand. It also notifies the occupant when the filters need to be replaced. The “Evolution” and “Reference” benefit from a control module and wifi connection for setup and visualization on Smartphone.

*specific to Excellence version

AERECO – DX System 3

BRING SERENITY AND COMFORT IN YOUR HOME WITH THE NEW DX SYSTEMThe DX System is a range of smart heat recovery ventilation system that supply pollen-free and dust-free preheated fresh air to living areas, ensuring a comfortable feel-good climate. Using a smart airflow control management, the DX System offers optimal indoor air quality while limiting all inherent noises from the ventilation units. In addition to the air quality and comfort it also ensures a substantial energy saving thanks to heat recovery and accurate and automatic airflow adaptation to the occupants needs in all rooms.

Conventional heat recovery

Average airflow

Average power consumption

DX SYSTEM

How a full demand controlled airflows can reduce electrical consumption of the fans

In addition to significant energy savings on heat losses, the DX System reduces primary energy consumption by reducing fan power of the unit. The fan type used (highly efficient brushless electronic commutation motors), low pressure operation and average airflow reduction through demand controlled ventilation (50%) allow the DX System to work at an average power greatly reduced compared to that of a standard heat recovery system using one or several speeds. Power consumption is thereby reduced by more than 50%.

Filters kept clean longer = less power consumption

By reducing the average airflows (by about 50%) with an equivalent indoor air quality, the DX System reduces the rate of filters clogging, thanks to the reduce volume of air passing through the filters at any given period. Filter durability is doubled compared to traditional heat recovery systems, thereby reducing pressure drops and the power consumption of the motors.


Modulation enables a significant reduction in average airflows while providing excellent air quality, with heat losses produced by ventilation lowered by half on average in comparison with a constant airflow ventilation. The heat exchanger operates with a yield of about 87% recovery (DXR efficiency: 82%; DXA efficiency: 93%). Combined, these features achieve about 92% energy savings when compared with a mechanical exhaust ventilation system at constant airflow, with the same indoor air quality.

50% savings on electrical consumption

The average airflow reduction, due to the demand control ventilation offered by the DX System, also generates important savings on electrical consumption and the impact of this on preheating and fan power (see below) is very positive, saving more than 50% electrical power in comparaison with a constant airflow heat recovery with 92% efficiency.

DYNAMIX® TECHNOLOGY : AN OUTSTANDING ENERGY PERFORMANCE THROUGHOUT THE YEARBy combining the benefits of full demand controlled airflows and heat recovery, which are the pillars of the DynamiX® technology, the DX System, in Excellence version, delivers outstanding energy performance.

MODULATION

50%savings

on the airflows

HEAT EXCHANGER

87%heat recovery

more than

92%savings on air renewal heating

+ =

50% savings on the electrical consumption

Aereco DX System heat recoveryHeat recovery 92% e�ciency

Heat losses through ventilation

Pre-heating (electrical)Fans consumption (electrical)


DXR - False ceiling installation

Designed for ceiling installation within the heated space, the DXR provides a truly elegant solution for multi-apartments buildings, where available space for systems is often limited, particularly in renovation projects. Its very low thickness (26 cm) and its reduced width (65 cm) allow easy installation in ceiling spaces (for example in a corridor false ceiling).

DXA - Wall mounted application

The DXA has been specifically designed for cupboards installation. Thanks to its well-fitted dimensions, the DXA can be installed both in kitchen and in other technical rooms, wall-mounted. A creamy white metal sheet covers the front face of the the DXA which allows it to be unnoticed as a technical equipment.

DXR and DXA have been specifically designed to ensure that only one person is required to install them. Wether it is done by using an ingenious concept for the DXR or by specific handles on the side fore the DXA, both of these new products use innovative concept to simplified their installation.

Filters can be easily replaced without dismounting the unit, both on the DXR and on the DXA, by just simply removing the trapdoors.

DX SYSTEM - AS FLEXIBLE AS NEEDED, FOR RENOVATION AND NEW BUILD

SIMPLIFIED INSTALLATION AND EASY FILTERS CHANGE

Through the DX System, a completely new range of heat recovery ventilation systems has been designed by Aereco to offer you the maximal flexibility in your choice for the adequate ventilation solution.


DX SYSTEM INSTALLATION LAYOUT

Main difference of Premium & Evolution DX Systems is that the exhaust airflow is still regulated individually in each room, while the supply air is modulated globally for all the dwelling.

Premium, Evolution and Reference version

Compared to the Excellence version, the Premium version does not use any hub. At least, one sensor on the supply side helps adjust the airflow.

In the Evolution version, the supply side is replicating the demand controlled extract side

The Reference version brings further simplification of the control algorithm, providing constant airflow at supply and exhaust. For more details please refer to our selection guide.

12

33

3

3

5

9

54

5

5

6

6

78

Excellence version

Airflows are automatically controlled according to the needs of each dwelling’s room. Outdoor filtered air is supplied 3 in the bedrooms and in the living room. Stale air is extracted 6 , 7 from the kitchen, bathroom and WC.

The supply airflows to all main rooms are regulated based on the inputs from one or many CO2 sensors or presence detectors 5 . On the exhaust 6 side, the airflow is adjusted, according to parameters read by various sensors (BXC): humidity in the kitchen and bathroom), and presence detector in WC.

The total supply and exhaust airflows are balanced thanks to an exhaust-controlled compensation valve 8 , installed in the bathroom or in the kitchen 7 . An additional compensation valve, integrated in the DX Hub 2 , adjusts supply compensation airflow, supplying preheated 4 fresh

air in the living room, in the kitchen or in a corridor.

Principle of operation

The DX System is comprised of a main unit 1 DXA (wall-mounted) or DXR (ceiling-mounted) connected to exhaust and supply ductworks. The counter-flow heat exchanger, integrated into the main unit, ensures the recovery and transfer of most of the energy from the exhaust air to the supply air, thus limiting the energy required to heat the fresh air.

Excellence version

Premium version

Evolution version

Reference version

1DX Unit

Heat recovery unit with balanced demand controlled airflows

1 (DXR or DXA)

DXR DXA

2DX Hub

Distribution box for demand controlled supply airflows

1 hub only for excellence

- - -

DX HUB 5 DX HUB 6

3 SDCSupply unit

1 to 6 1 to 6 1 to 6 1 to 6

4 SDCSupply unit for balance

1 - - -

5 CO2 sensors

1 to 5 at least 1 - -

5 Presence sensors(CO2 or/and

presence sensors)

6BXC

Exhaust unit with integrated humidity, presence detection or other sensors

1 to 5 1 to 5 1 to 5 -

7 BXC bExhaust unit for balance

1 1 - -

8 Exhaust compensation valve 1 1 - -

9Preheater

Galvanised steel body with built-in resistance

1 (optional)

1 (optional)

1 (optional)

1 (optional)

Touch screenDisplay and control module for the user also

used for maintenance1 1 - -

Control module / WiFi - - 1 1

Note: Some other components may be used in the system such as condensation exhaust pump, acoustic silencers, etc. See page 18 to page 19.


DX System components:

VERSION EXCELLENCE PREMIUM EVOLUTION REFERENCE

Design

DXRWhite painted galavanized

steelWhite painted galavanized

steel Galvanized steel Galvanized steel

DXAEPP with optional white

metal sheet coverEPP with optional white



metal sheet cover

HUB5 Galvanized steel - - -

HUB6 Galvanized steel - - -

Demand controlled ventilation

@ ExhaustRoom by room demand

controlRoom by room demand

controlRoom by room demand

controlConstant exhaust airflow

@ supplyRoom by room demand

controlGlobal flow demand control

Global flow modulated to balance exhaust airflow

Constant airflow ( same that exhaust airflow)

Sensors @ supply 1 to 5 At least 1 - -

Sensors @ exhaust 1 to 5 1 to 5 1 to 5 -

Airflow

Max. Airflow 230 230 230 230

Other nominal airflows 80 / 140 / 200 80 / 140 / 200 80 / 140 / 200 80 / 140 / 200

Free-cooling Yes Yes Yes Yes

Preheating Yes (optional) Yes (optional) Yes (optional) Yes (optional)

Power consumption

Ecodesign label A+ A+ A+ A

Others

Interface Touchscreen Touchscreen Control module / WiFi Control module / WiFi

Condensation management Siphon or pump Siphon or pump Siphon or pump Siphon or pump


WHICH VERSION FOR WHICH NEEDS



Base

Control and power supply box

Fans

Heat exchanger

Condensation receiver

Access cover

Filter G4

Filter F7

Filter trapdoors

DXR: Top efficient heat recovery unit with a top model size

With a base, a distribution box and vital parts all being made of metal, DXR wins on quality and maximum durability. Most of its components (motor, fans, and heat exchanger) are manufactured in Germany and assembled in Aereco, in France.

HIGH QUALITY MANUFACTURE


DXA: So much discreet that it will go unnoticed in the technical room

The DXA is produced using mainly the EPP (Expanded Polypropylene), which is a ¨green¨, environment friendly material, 100% recyclable. It doesnot include any VOC (volatile organic compound), CFC (chlorofluorocarbon) or other compounds known to be particularly harmful to the environment. Inaddition, weighting only 16 kg, DXA has a very high resistance to weight ratio.The touchscreen interface may be integrated in the DXA unit (in its interface base ) or fixed on the wall at max 10m from the main unit.

Ductwork white metal sheet cover (optional)

Exhaust and supply galvanized ducts

Control and power supply box

Fan

Bypass

White metal sheet cover

Filter trapdoors

Interface base

Base

Filter G4

Bypass

Condensate pump / siphon

Heat exchanger

Filter F7


Base


Fan

Filter F7

Base


DXA - Dimensions in mm

DXR - Dimensions in mm

140

116012

4

158

246

258

1260

140

328

328

714

650

DN160 DN16

0316

125

ø160 ø160 88

101

166

164 210

248 151 155

1189

240

R2,50

80

1184

130

545

40

482

545 138 118

151

R80

248

155

554

R80

101


DX Hub 6 - Dimensions in mm

DX Hub 5 - Dimensions in mm

755

124

280

100

12920

0114

63663

6

685

695

78 134

254

340

Ø158

Ø158

695773

126685

DN75105

Ø13

200

100

DN 100 DN 100 DN 125

DN

100 11

8

100

151

DN 160

151

100

DN 160

640

546

494

433

520

31,5

21,5

DN 13

468

577


DXR

Standard codeDXR1225 (Excellence / Premium)

DXR1714 (Evolution)DXR1708 (Reference)

EcodesignLabel (EU Ecodesign Directive) A+ (for Excellence, Premium, Evolution) - A (for Reference)Airflow characteristicsMax. airflow m3/h 230Other nominal airflows m3/h 80 / 140 / 200 / 230Airflow compensation (filter clogging) automaticAirflow balance (supply and exhaust) automaticAcousticsSound power level Lw @ 161 m3/h, 50 Pa dB(A) 40Certifications dB CE, EACElectricsPower supply 230 VAC, 50 HzMotor type EC (x2)Power consumption @ 161 m3/h @50 Pa W 34,2Power consumption @ 230 m3/h @50 Pa W 91,0Sensors connections RJ12 / RJ45Demand controlCompatible versions of DX System Excellence / Premium / Evolution / ReferenceMin - Max Number of sensors for modulation at supply (1 - 5) for Excellence / PremiumMin - Max Number of sensors for modulation at exhaust (1 - 5) for Excellence / PremiumSensors type at supply presence / C02

Exhaust units type humidity / presence / switch / C02 / VOCCharacteristicsExchanger aluminium / counter flow type / 82% efficiencyFilters on supply air: 1 x F7 / on exhaust air: 1 x G4Weight kg 46Colour white for Excellence / Premium - galvanized steel for Evolution / ReferenceMaterial (main) galvanised steel with phonic and thermal insulationDimensions mm with duct connectors: 260 x 650 x 1200 / without duct connectors: 260 x 650 x 1160InstallationMax. number of main rooms 6Max. number of technical rooms 5Connections 2 x (2 x ø160 mm)Installation horizontal only, to the false ceiling / 4 points of attachmentOther functionsInterface 2.8” Colour Touch Screen interface (Excellence / Premium) - Control module / WiFi (Evolution / Reference)Bypass controlled by outdoor temperature / also used for free coolingPreheating (optional) with resistance in fresh air ductwork from outsideCondensation management exhaust through lateral tube / optional condensate pumpTemperature of useInstallation room frost free: +5°C < T°< +50°CIncoming outdoor fresh air or Extract -5°C < T° < +50°C without preheating / -26°C < T° < +50°C with preheating

DXR Heat recovery unit for ceiling installation

A B C D E F G

A+A B C D E F G

A+


DXA

Standard codeDXA1240 (Excellence / Premium)

DXA1712 (Evolution)DXA1705 (Reference)

DXA1247 (Excellence / Premium)DXA1711 (Evolution)DXA1706 (Reference)

EcodesignLabel (EU Ecodesign Directive) A+ (for Excellence, Premium, Evolution) - A (for Reference)Airflow characteristicsMax. airflow m3/h 230Other nominal airflows m3/h 80 / 140 / 200 / 230Airflow compensation (filter clogging) automaticAirflow balance (supply and exhaust) automaticAcousticsSound power level Lw @ 161 m3/h, 50 Pa dB(A) 52

Certifications CEElectricsPower supply 230 VAC, 50 HzMotor type EC (x2)Power consumption @ 161 m3/h @50 Pa W 36,5Power consumption @ 230 m3/h @50 Pa W 92,0Sensors connections RJ12Demand controlCompatible versions of DX System Excellence / Premium / Evolution / ReferenceMin - Max Number of sensors for modulation at supply (1 – 5) for Excellence - At least 1 for Premium - No for othersMin - Max Number of sensors for modulation at exhaust (1 - 5) for Excellence / PremiumSensors type at supply presence / C02 (Excellence / Premium)Exhaust units type humidity / presence / switch / C02 / VOC (Excellence / Premium / Evolution)CharacteristicsExchanger polystyrene / counter flow type / 93% efficiencyFilters on supply air: 2 x F7 / on exhaust air: 1 x G4Weight kg 23Colour black / Grey EPP - white painted Galvanized steel houssing (option)Material (main) expanded polypropylene (EPP) covered by a white galvanized metal sheet (optional)Dimensions mm with duct connectors: 1428 x 552 x 545 / without duct connectors: 1188 x 552 x 545InstallationMax. number of main rooms 6Max. number of technical rooms 5Connections 2 x (2 x ø160 mm)Installation 2 wall fixed railsOther functions (in option)Interface 2.8” Colour Touch Screen interface (Excellence / Premium) - Control module / WiFi (Evolution / Reference)Bypass controlled by outdoor temperature / also used for free coolingPreheating (optional) with resistance in fresh air ductwork from outsideCondensation management condensate pump exhaust through siphonTemperature of useInstallation room frost free: +5°C < T°< +50°CIncoming outdoor fresh air or Extract -5°C < T° < +50°C without preheating / -26°C < T° < +50°C with preheating

DXA Heat recovery unit for wall installation

A B C D E F G

A+A B C D E F G

A+


0 50 100 150 200 2500

50

100

150

200

250

300

350

a bc d

Pressure in Pa

Airflow in m3/h

80 m3/h140 m3/h

200 m3/h230 m3/h

DXR Unit maximal airflow setting :

a = 40 dBb = 43 dB

c = 46 dBd = 49 dB

Sound power level Lwa

0 50 100 150 200 2500

50

100

150

200

250

300

350

ab

c d

Pressure in Pa

Airflow in m3/h

80 m3/h140 m3/h

200 m3/h230 m3/h

a = 40 dBb = 43 dB

c = 46 dBd = 49 dB

80 m3/h140 m3/h

200 m3/h230 m3/h

DXA Unit maximal airflow setting :

a = 49 dBb = 54 dB

c = 59 dBd = 60 dB

Sound power level Lwa

0 50 100 150 200 2500

10

20

30

40

50

60

70

80

90

100

Power in W

Airflow in m3/h

80 m3/h140 m3/h

200 m3/h230 m3/h

DXR Unit maximal airflow setting :

0 50 100 150 200 2500

10

20

30

40

50

60

70

80

90

100

Power in W

Airflow in m3/h

80 m3/h140 m3/h

200 m3/h230 m3/h

DXA Unit maximal airflow setting :

DXR - Airflow characteristics

DXA - Airflow characteristics


Standard code HUB1288

Airflow characteristics

Pressure at supply Pa 25

Acoustics

Phonic enveloppe

Phonic silencers -

Electrics

Electrical connections (sensors) 5 x RJ12

Characteristics

Weight kg 10,9

Dimension mm 592 x 490 x 206

Colour metal

Material (main) galvanised steel with phonic and thermal insulation

Inlet duct connections (to DXR or DXA) choice among 2 x ø160 mm

Outlet duct connections (to the supply units) 5 x ø100 mm + 1 x ø125 mm

Installation

Installation horizontal or vertical

Installation room frost free: +5°C < T°< +50°C

Standard code HUB1434

Airflow characteristics

Pressure at supply Pa 65

Acoustics

Phonic enveloppe

Phonic silencers

Electrics

Electrical connections (sensors) 5 x RJ12

Characteristics

Weight kg 18

Dimension mm 695 x 684 x 199

Colour metal

Material (main) galvanised steel with phonic and thermal insulation and acoustic silencers

Inlet duct connections (to DXR or DXA) choice among 3 x ø160 mm

Outlet duct connections (to the supply units) 6 x ø75 mm

Installation

Installation horizontal or vertical

Installation room frost free: +5°C < T°< +50°C

DX HUB 6 Active air supply distribution box

DX HUB 5 Active air supply distribution box

standard

standard


DXR Heat recovery unit for ceiling installation Excellence / Premium

DXR 230

Code

Exhaust compensation

valve

Code


unit

Code

Exhaustunit

Code

Supplyunit

Code

DXR1225 ADX1224 BFX114 BXCxxx SDC1107

+ Quantity Quantity Quantity Quantity Quantity

SiphonX1 X1 X1

1 / main room

up to 5

1 / main room

up to 6

Preheater

Code

x1 F7x1 G4

Filter kit

Code

Condensatepump

Code

Fixing suspension

system

Code

ADX1098 ADX1254 ADX1099 ADX1106

Acousticsilencer

RJ45 cable

Code

RJ12 cable

Code

5 m : ADX119710 m : ADX1123

5 m : ADX124910 m : ADX125020 m : ADX125130 m : ADX1252

DX HUB 5

Code

Supply compensation

unit

Code

Wallinterface

Code

HUB1288 SDC1108 IHM1293

Quantity Quantity Quantity

X1 X1 X1

Wallinterface

Code

CO2sensor

Code

Presencesensor

Code

IHM1195 CAP1100 CAP1101

Quantity Quantity

X1 at least 1, up to 5

CO2sensor

Code

Presencesensor

Code

CAP1100 CAP1101

Quantity

at least 1, up to 5

DX HUB 6

Code

Wallinterface

Code

HUB1434 IHM1362

Quantity Quantity

X1 X1

CO2sensor

Code

²

Presencesensor

Code

CAP1100 CAP1101

Quantity

at least 1, up to 5

PREM

IUM

VER

SIO

N:

GLO

BAL

DCV

HRV

BASI

C IT

EMS

EXCE

LLEN

CE V

ERSI

ON

:FU

LL D

CV H

RVAC

CESS

ORI

ES

OR


DXR Heat recovery unit for ceiling installation Evolution / Reference

DXR

Code

Supplyunit

Code

DXR1708 SDC1107

+ Quantity Quantity

SiphonX1

1 / main room

up to 6

Preheater

Code

x1 F7x1 G4

Filter kit

Code

Condensatepump

Code

Fixing suspension

system

Code

ADX1098 ADX1254 ADX1099 ADX1106

Acousticsilencer

RJ45 cable

Code


SmartInterface

Code

IHM1707

10 m

A m

ax5V

DC

OUT

1

OUT

2

IN 2

IN 1

0 Vo

lt

2I2O

MOD

ULE

Power ON

Modbus tra�c

Modbus connection

Module2I2O

Code

ADX1673

BASI

C IT

EMS

REF

REN

CE

Preheater

Code

x1 F7x1 G4

Filter kit

Code

Condensatepump

Code

Fixing suspension

system

Code

ADX1098 ADX1254 ADX1099 ADX1106

Acousticsilencer

RJ45 cable

Code


SmartInterface

Code

IHM1707

10 m

A m

ax5V

DC

OUT

1

OUT

2

IN 2

IN 1

0 Vo

lt

2I2O

MOD

ULE

Power ON

Modbus tra�c

Modbus connection

Module2I2O

Code

ADX1673

BASI

C IT

EMS

EVO

LUTI

ON

DXR 230

Code

Exhaustunit

Code

Supplyunit

Code

DXR1714 BXCxxx SDC1107

+ Quantity Quantity Quantity

SiphonX1

1 / main room

up to 5

1 / main room

up to 6


Excellence / PremiumDXA Heat recovery unit for wall installation

DXA230

Code

DXA1240

+ Quantity

Condensatepump

X1

DXA230

Code

DXA1247

+ Quantity

SiphonX1


valve

Code


unit

Code

Exhaustunit

Code

Supplyunit

Code

ADX1224 BFX114 BXCxxx SDC1107

Quantity Quantity Quantity Quantity

X1 X11 / main

roomup to 5

1 / main room

up to 6

Wallinterface

Code

IHM1439

Quantity

X1

Built-ininterface

Code

IHM1438

Quantity

X1

CO2sensor

Code

Presencesensor

Code

CAP1100 CAP1101

Quantity

at least 1, up to 5

OR

OR

Wallinterface

Code

IHM1295

Quantity

X1

Built-ininterface

Code

IHM1294

Quantity

X1

Wallinterface

Code

IHM1441

Quantity

X1

Built-ininterface

Code

IHM1440

Quantity

X1

PREM

IUM

VER

SIO

N:

GLO

BAL

DCV

HRV

BASI

C IT

EMS

DX HUB 5

Code

Supply compensation

unit

Code

HUB1288 SDC1108

Quantity Quantity

X1 X1

DX HUB 6

Code

HUB1434

Quantity

X1

CO2sensor

Code

Presencesensor

Code

CAP1100 CAP1101

Quantity

at least 1, up to 5

EXCE

LLEN

CE V

ERSI

ON

:FU

LL D

CV H

RV

OR

OR

OR

Preheater

Code

ADX1098

x2 F7x1 G4

Filter kit

Code

ADX1428

Upper designcover

Code

ADX1449

RJ45 cable

Code

5 m : ADX119710 m : ADX1123

RJ12 cable

Code5 m : ADX124910 m : ADX125020 m : ADX125130 m : ADX1252

ACCE

SSO

RIES

Acousticsilencer

Metal white front cover

for IHM 1438IHM 1294IHM 1440

Code

ADX1448

Metal white front cover

for IHM 1439IHM 1295IHM 1441

Code

ADX1555


Evolution / ReferenceDXA Heat recovery unit for wall installation

DXA230

Code

DXA1705

+ Quantity

Condensatepump

X1

DXA230

Code

DXA1706

+ Quantity

SiphonX1

Supplyunit

Code

SDC1107

Quantity

1 / main room

up to 6

OR

BASI

C IT

EMS

Preheater

Code

x2 F7x1 G4

Filter kit

Code

Metal whitefront cover

Code

ADX1098 ADX1428 ADX1555

Acousticsilencer

RJ45 cable

Code


SmartInterface

Code

IHM1707

10 m

A m

ax5V

DC

OUT

1

OUT

2

IN 2

IN 1

0 Vo

lt

2I2O

MOD

ULE

Power ON

Modbus tra�c

Modbus connection

Module2I2O

Code

ADX1673

REFE

REN

CE

DXA230

Code

DXA1712

+ Quantity

Condensatepump

X1

DXA230

Code

DXA1711

+ Quantity

SiphonX1

OR

BASI

C IT

EMS

Exhaustunit

Code

Supplyunit

Code

BXCxxx SDC1107

Quantity Quantity

1 / main room

up to 5

1 / main room

up to 6

Preheater

Code

x2 F7x1 G4

Filter kit

Code

Metal whitefront cover

Code

ADX1098 ADX1428 ADX1555

Acousticsilencer

RJ45 cable

Code


SmartInterface

Code

IHM1707

10 m

A m

ax5V

DC

OUT

1

OUT

2

IN 2

IN 1

0 Vo

lt

2I2O

MOD

ULE

Power ON

Modbus tra�c

Modbus connection

Module2I2O

Code

ADX1673

EVO

LUTI

ON


Notes:


Notes:

FLY6

51GB

_v9

– Co

pyrig

ht A

erec

o –

Imag

es: A

erec

o, F

otol

ia –

All

data

and

pict

ures

in th

is do

cum

ent a

re n

on c

ontra

ctua

l and

are

sub

ject

to c

hang

e wi

thou

t prio

r not

ice.

Aereco S.A.62 rue de Lamirault – Collégien – 77615 MARNE LA VALLEE CEDEX 3 – FRANCE – tel. +33 1 60 06 26 63 – fax +33 1 64 80 47 26

www.aereco.com

Documents

DX SYSTEM - Aereco