Upload
arashraf
View
65
Download
0
Embed Size (px)
Citation preview
DXX 6345 Switch Node
General
The DXX 6345 Switch Node is a member of the
Ericsson DXX 8000 Managed Access System
product family intended for cellular transport
system. It enables the user to build future proof
networks, which easily adapts to new services
and with the ability of easy expansion.
The DXX 6345 Switch Node is a high-capacity
next-generation transport switch with a low
initializing cost. The node suits well for data
applications, as a HRAN (High capacity Radio
Access Network) hub or as a ring interconnector.
The DXX 6345 is a single subrack, "half-size
DXX 6350" providing 8 universal interface slots.
The DXX 6345 is based on a single, central
switching module that connects at 4/4, 4/4/1
and 4/3/1 levels. Configured as a VC-4 cross-
connect, 256 STM-1 equivalent ports are avail-
able, and cross-connect and synchronization
functions can be equipment protected.
Configured as a VC-4 and VC-12 cross-connect,
up to 256 STM-1 equivalent ports are available
at 4/4 level and 128 at 4/1 level.
Available network protection schemes include
SNC protection of VC-n signals as well as MSP
1+1 of STM-n line signals and MS-SPRing
protection.
The DXX 6345 offers a unique way of
implementing Ethernet traffic. The traffic is
mapped over SDH using GFP (Generic Framing
Procedure), LAPS and/or LAPF. For connection
and protection of the Ethernet traffic, the LCAS
standard is used.
Key Features
Fully non-blocking cross connect capacity of
256 VC-4 HO, 128 VC-4 LO
The management of the DXX 6345 can be
performed from DXX 8100 Network Manager
or from a local craft terminal
Supports all types of configurations, ADM
(Add Drop Multiplexer), TM (Terminal Multiplexer)
and SDXC (Synchronous Digital Cross Connect)
Multiple ring-interconnect switching
High density (low space)
Scalable and adaptable in terms of cost, size
and performance
With support from DXX 8100 Network Manager
End-to-end circuit provisioning
Performance monitoring
Remote software download
Circuit loop testing
Synchronization management (SSM)
Managed Access System
DXX 8000 Network
DXX 8100 Network manager
High capacity RAN:STM-1, STM-4, STM-16
Low capacity RAN:STM-1, PDH
BCS/RNC
TRC/MSC
DXX6345
BCS/RNC
DXX6340
DXX6345
DXX6310
DXX8160
DXX8150
DXX6310
DXX8150
DXX8130
DXX8160
DXX6320
DXX6320
Interfaces
Optical Interfaces: STM-1 (S-1.1, L-1.1, L-1.2), STM-4 (S-4.1,
L-4.1, L-4.2), STM-16 (S-16.1, L-16.2), STM-64 (S-64.1, S-64.2,
I-64.1, L-64.2), GB Ethernet (SX, LX), Fast Ethernet. According
to ITU-T G.957 and ITU-T G.707
Electrical Interfaces: STM-1
Transmission characteristics: According to ITU-T G.703
Synchronization
Synchronization sources: STM-N interfaces (T1), External
sources (T3) either 2Mbit/s or 2MHz signals.
Cross connect levels: VC-12, VC-3 and VC-4
Cross connect size: 256 VC-4 ports Higher Order Matrix, 128
VC-4 ports Lower Order Matrix
Protection
Traffic protection: SNC (VC-4, VC-3, VC-12), 2 Fibre
MS-SPRing, MSP 1+1.
Equipment protection: 1+1 of cross connect, 1+1 of
synchronization function, 1:N of STM-1 electrical modules, 1+1
of power supply filter.
Power supply
Input Voltage: -40.5V to -72V DC
Redundancy: 1+1
Power consumptions: (Examples)
ADM64 with 1+1 protection and drop at STM-1: 650W
8 STM-16 rings with full connectivity at 4/4 level: 600W
Full 128 port 4/1 cross connect with 32 STM-1 and 32 STM-4: 560 W
Enviromental Conditions
Operating temperature range: -5 °C to +45 °C
Mechanics
DXX 6345 is based on ETSI standard.
The subrack dimensions are: 500x474x280 (WxHxD)
Ericsson ABTransmission & Transport NetworksSE-164 80 Stockholm, SwedenTelephone +46 8 757 15 00Fax +46 8 404 25 60www.ericsson.com
EN/LZT 123 7729 R2
© Ericsson AB 2003
All technical data is typical and is
subject to change without notice
Technical data
Application exampleA typical application is when the DXX 6345 is a termination point for several STM rings and dropping STM or Ethernet traffic
to an MSC/BSC site.