Upload
vuongnhi
View
278
Download
2
Embed Size (px)
Citation preview
Remarks:
Unless indicated otherwise, values are determined according to the applicable European standards and are valid as of the date of thisdocument. Products are subject to continuous development and improvement and these values may change over time.
In case of requirement the delivery of products with different dimensions or other technical data or in the case of interest of technicalconsultation please contact technical department by e-mail: [email protected].
Page 1 of 1 TS_NWX_EN_A_13_02
Bontec Weight
Tensile Strength Elongation StaticPuncture
(CBR)
DynamicPerforation(Cone drop
test)
Waterpermeability
normal tothe plane
OpeningSize
Thicknessat 2 kPa
Roll
longitudinal transverse longitudinal transverse width length area weight [g/m2] [kN/m] [kN/m] [%] [%] [kN] [mm] [l/m2/s] [mm] [mm] [m] [m] [m2] [kg]
EN ISO9864 EN ISO 10319
EN ISO12236
EN ISO13433 EN ISO 11058
EN ISO12956
EN ISO9863
NW 6 86 6,6 6,6 42 42 1,10 48 130 0,119 0,9 5,25 100 525 42NW 7 90 7,0 7,0 45 45 1,20 42 130 0,125 0,9 5,25 100 525 45NW 8 110 8,3 8,3 45 45 1,40 40 125 0,090 1,1 5,25 100 525 53NW 9 115 9,0 9,0 50 50 1,50 30 120 0,115 1,1 5,25 100 525 58NW 10 125 10,0 10,0 50 50 1,60 30 115 0,115 1,2 5,25 100 525 63NW 12 155 12,0 12,0 50 50 2,00 24 105 0,110 1,3 5,25 100 525 76NW 13 165 13,0 13,0 50 50 2,20 22 100 0,100 1,4 5,25 100 525 84NW 15 190 15,0 15,0 50 50 2,60 21 100 0,100 1,5 5,25 100 525 92NW 16 200 16,0 16,0 50 50 2,70 20 90 0,090 1,6 5,25 100 525 105NW 18 225 18,0 18,0 50 50 3,00 19 85 0,090 1,7 5,25 100 525 110NW 20 235 20,0 20,0 50 50 3,40 14 80 0,070 1,7 5,25 100 525 123NW 21 260 21,0 21,0 50 50 3,50 16 75 0,070 2,1 5,25 100 525 137NW 25 300 25,0 25,0 50 50 4,00 11 55 0,070 2,0 5,25 100 525 158NW 26 335 26,0 26,0 50 55 4,35 12 65 0,070 2,3 5,25 100 525 171NW 32 385 32,0 32,0 50 50 5,40 10 45 0,065 1,9 5,25 100 525 202NW 40 570 40,0 48,5 60 60 7,00 6 35 0,070 3,6 5,25 100 525 273