Upload
bhuvaneswaran-kannaiyan
View
296
Download
3
Embed Size (px)
Citation preview
Testing: Unit Testing / User Manual Module: Quality Management
ENVIRONMENT
SYSTEM : SAP R/3 ECC 6.0
CLIENT : 200
UNIT TESTING SCENARIO
SCENARIO NUMBER : QM03 - 13
DESCRIPTION : SAMPLING PLAN
PREPARED & TESTED BY
NAME : J.SIVA
SIGNATURE :
DATE : 25.12.2008
TEAM : QM
Approved By : Kabir R (PwC)
Page 1 of 35
Testing: Unit Testing / User Manual Module: Quality Management
1. Transaction Code/ Path
Enter the menu path of the transaction code, which is going to be tested by the user.
Menu Path Logistics - Quality Management – Quality Planning – Basic Data – Sample – Dynamic Modification Rule- Create
T.Code QDR1
Enter
Page 2 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Type Dynamic Modification Rule NameEnter
Type Dynamic Modification Rule Short text
Click Button
Page 3 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Type First line Stage No, Select Inspection Sev, Put Tick mark ISt Box, Type Short text Name
Page 4 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Next Line Type Stage No, Select Inspection Sev, Type Short text Name
If Your Required for Reduced Sampling plan Following Screen Display
Next Line Type Stage No, Select Inspection Sev, Type Short text Name
Page 5 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Same Procedure Follow up All lines, All Skip Stages put Tick mark in Skip box
Page 6 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Select First line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of Lot Inspections Ok lots, New Insp.stage (Next lot goes to next Stage no) Enter allowed Rejections lots, New insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of Lot Inspections Ok lots and New Insp.stage (Next lot goes to next Stage no) Allowed Rejections no of lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Page 7 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Select Next line And Click Stage Change Tab, After System Display In this Screen.TypeRequired No. of Lot Inspections Ok lots and New Insp.stage (Next lot goes to next Stage no) Allowed Rejections no of lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of skip Ok lots, Max.skip duration, New Insp.stage (Next lot goes to next Stage no) Allowed Rejections lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Page 8 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of Lot Inspections Ok lots and New Insp.stage (Next lot goes to next Stage no) Allowed Rejections no of lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of skip Ok lots, Max.skip duration, New Insp.stage (Next lot goes to next Stage no) Allowed Rejections lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Page 9 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of Lot Inspections Ok lots and New Insp.stage (Next lot goes to next Stage no) Allowed Rejections no of lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of skip Ok lots, Max.skip duration, New Insp.stage (Next lot goes to next Stage no) Allowed Rejections lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Page 10 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of Lot Inspections Ok lots and New Insp.stage (Next lot goes to next Stage no) Allowed Rejections no of lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of skip Ok lots, Max.skip duration, New Insp.stage (Next lot goes to next Stage no) Allowed Rejections lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Page 11 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of Lot Inspections Ok lots and New Insp.stage (Next lot goes to next Stage no) Allowed Rejections no of lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of skip Ok lots, Max.skip duration, New Insp.stage (Next lot goes to next Stage no) Allowed Rejections lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Page 12 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of Lot Inspections Ok lots and New Insp.stage (Next lot goes to next Stage no) Allowed Rejections no of lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of skip Ok lots, Max.skip duration, New Insp.stage (Next lot goes to next Stage no) Allowed Rejections lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Page 13 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of Lot Inspections Ok lots and New Insp.stage (Next lot goes to next Stage no) Allowed Rejections no of lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of skip Ok lots, Max.skip duration, New Insp.stage (Next lot goes to next Stage no) Allowed Rejections lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Page 14 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of Lot Inspections Ok lots and New Insp.stage (Next lot goes to next Stage no) Allowed Rejections no of lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of skip Ok lots, Max.skip duration, New Insp.stage (Next lot goes to next Stage no) Allowed Rejections lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Page 15 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Select Next line And Click Stage Change Tab, After System Display In this Screen.Type Required No. of Lot Inspections Ok lots and New Insp.stage (Next lot goes to next Stage no) Allowed Rejections no of lots, new insp.stage (Next lot goes to next Stage no)Click Tick mark tab
Page 16 of 35
Testing: Unit Testing / User Manual Module: Quality Management
SAVE
Page 17 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Click Yes Button
Click Tick mark
Click Tick mark
Page 18 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Click back button
2. Transaction Code/ Path
Page 19 of 35
Testing: Unit Testing / User Manual Module: Quality ManagementEnter the menu path of the transaction code, which is going to be tested by the user.
Menu Path Logistics - Quality Management – Quality Planning – Basic Data – Sample – Sampling Scheme - Create
T.Code QDP1
Enter
Page 20 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Enter Sampling Scheme NameClick Sampling Scheme Tab
Type Sampling Scheme Short text Select Severity/AQLClick button
Page 21 of 35
Testing: Unit Testing / User Manual Module: Quality Management
System Display in this screenSelect Insp.severity
Click Choose tab
Page 22 of 35
Testing: Unit Testing / User Manual Module: Quality Management
System will be Display in this Screen
Type Lot Size, Sample Qty, Accepted Qty, Rejection Qty
Page 23 of 35
Testing: Unit Testing / User Manual Module: Quality Management
After Click Continue button
System Display in this screenSelect another next Stage Inspection Severity Click choose tab
Page 24 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Type Lot Size, Sample Qty, Accepted Qty, Rejection Qty
System Display in this screenSelect another next Stage Inspection Severity Click choose tab
Page 25 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Type Lot Size, Sample Qty, Accepted Qty, Rejection Qty
SAVE
3. Transaction Code/ Path
Page 26 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Enter the menu path of the transaction code, which is going to be tested by the user.
Menu Path Logistics - Quality Management – Quality Planning – Basic Data – Sample – Sampling Procedure - Create
T.Code QDV1
Enter
Page 27 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Type Sampling Procedure NameClick Sampling Procedure Tab
Select Sampling Type 300 Use sampling scheme mandatory
Page 28 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Sampling Procedure for two types 1. Quantitative Sampling Procedure, 2. Qualitative Sampling Procedure Select Valuation mode 100Attritive inspection nonconf.units (Qualitative)Select Valuation mode 700 Mean value within tolerance range (Quantitative)
Qualitative Sampling Procedure
Click button
Page 29 of 35
Testing: Unit Testing / User Manual Module: Quality Management
System will be Display in this screen
Select Sampling Scheme
Page 30 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Save
Click Yes Tab
Page 31 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Click Tick tab
Click Tick tab
Page 32 of 35
Testing: Unit Testing / User Manual Module: Quality Management
System will be Display in this Screen
Click Table view tab Select Display - Change
Page 33 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Click New Entries
Page 34 of 35
Testing: Unit Testing / User Manual Module: Quality Management
Select Procedure and Dynamic modification rule
SAVE
Click Back Tab
Creation of Quantitative sampling procedure Same Procedure,Valuation mode only changed.
Page 35 of 35