EDT 51 - Auxiliary Views 1

Weekend Cabin Retreat ProjectWeekend Cabin Retreat ProjectAuxiliary ViewsAuxiliary Views

Sacramento City CollegeEDT 51

Kenneth Fitzpatrick, P.E.

2 EDT 51 - Auxiliary Views

Multiview DrawingsMultiview Drawings

Principal views of multiview drawings are top, front and side views.

These views are normally adequate for describing the shape and size of most objects.

Objects which have features which are not in these principle planes need auxiliary views to adequately describe them.

3 EDT 51 - Auxiliary Views

Auxiliary ViewsAuxiliary Views

Auxiliary views provide the following basic information for features appearing on other than principal surfaces: true length of a line identifying the point view of a line finding the edge view of a plane determining the true size of a plane. Finding the true angle between planes.

4 EDT 51 - Auxiliary Views

Auxiliary ViewsAuxiliary Views

Auxiliary views are projected from orthographic views horizontal (top) frontal (front) profile (right)

5 EDT 51 - Auxiliary Views

Primary Auxiliary ViewsPrimary Auxiliary Views

A primary auxiliary view is a first, or direct projection of an inclined surface.

It is projected perpendicularly to one of the principal orthographic views.

A primary auxiliary view is perpendicular to only one of the principal views.

6 EDT 51 - Auxiliary Views

7 EDT 51 - Auxiliary Views

8 EDT 51 - Auxiliary Views

9 EDT 51 - Auxiliary Views

10 EDT 51 - Auxiliary Views

11 EDT 51 - Auxiliary Views