Efficient Products for Business, Process Efficiency & Self ... · November 2019 Efficient Products for Business, Process Efficiency & Self-Direct Agriculture Program Application 2020

November 2019

Efficient Products for Business, Process Efficiency & Self-DirectAgriculture Program Application 2020

Date: File Name: 0817-AEPOH-RNC-891977-My Solutions-Office Application-R1 Additional Details: Trim: 8.5 x 11 Finish Size: 8.5 x 11 Stock: Live: .5 Gutter: NA Finish: Bleed: N/A Color: 4C AM/PM: Gabe P. / Megan C.

November 2017

Efficient Products for Business, Process Efficiency & Self-DirectProgram Application 2018

2Efficient Products for Business, Process Efficiency & Self-Direct | 2020 Agriculture Program Application - November 2019 2Efficient Products for Business, Process Efficiency & Self-Direct | Program Application - November 2017



Table of ContentsAPPLICATION GUIDELINES 1

APPLICATION CHECKLIST 2

APPLICANT INFORMATION 3

CUSTOMER AGREEMENT 5

THIRD PARTY PAYMENT RELEASE 6

LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14

REFRIGERATION/FOOD SERVICE 15

AGRICULTURE 17

MISCELLANEOUS 18

PROCESS EFFICIENCY 19

NEW CONSTRUCTION LIGHTING 20





LIGHTING CONTROLS SPECIFICATIONS 6

LIGHTING – WATTS REDUCED WITH LIGHTING CONTROLS 7

LIGHTING – WATTS REDUCED ADDING LIGHTING CONTROLS 8

LIGHTING – WATTS REDUCED LIGHTING CONTROLS NOT VIABLE 9

LIGHTING – WATTS REDUCED WITHOUT LIGHTING CONTROLS* 10

LIGHTING 11

MOTORS WORKSHEET 12

MOTORS & DRIVES 15

AGRICULTURE 16










LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18



Application Guidelines

¹A Pre-Approval Application is not a guarantee of an incentive; the actual incentive will be based on the energy savings and equipment installed as determined in the Final Application. Funds are reserved for 90 days, unless an applicant is granted an extension. The program team reserves the right to contact the customer before the reservation expiration date to ensure that the project is moving forward. If the project is not underway, the reservation may be cancelled. Reserved funds are not transferable to other projects, facilities and/or customers. A waiting list will be established when funds become fully subscribed.

Step 1. Verify Eligibility • Customer must have a valid AEP Ohio account.• Equipment/measure must be installed at facilities

served by the AEP Ohio account.• Project must produce permanent reduction in electrical

energy use (kWh).• All installed equipment must meet or exceed the

specifications in the application.• Please see Efficient Products for Business, Process

Efficiency and New Construction Terms and Conditions or Self-Direct Terms and Conditions for program rules

and regulations.

Step 2. Complete Applicant Information• All fields in customer and project information sections

must be completed.• Contractor information must be completed if proj

not self-performed.

Step 3. Complete the Incentive Worksheet(s)• Find and read specifications related to the project.• Choose the incentive category on the worksheet based

on installed equipment and specifications.• Complete all fields (fixture description, operating hours,

etc.) on the related worksheet.

Step 4. Sign Customer Agreement• Read the Terms and Conditions before signing and

submitting the application.• Sign Pre-Approval Agreement and submit the

application to reserve funds.• Sign Final Application Agreement and submit the

application after the project is completed to receive funds.

• Complete Third Party Payment Release AuthorizationONLY if incentive payment is to be paid to an entityother than AEP Ohio customer listed on the ApplicantInformation page.

Step 5. Submit Pre-Approval Application1

(For Self-Direct applications, skip to Step 6)

• Submitting a Pre-Approval Application to determinequalification and reserve program funds for a project isstrongly recommended.

• All process efficiency projects require pre-approval.• Complete all fields in Pre-Approval Agreement.• Pre-Approval Application must be submitted with:

• Proposed scope of work (type and quantity of oldand new equipment must be listed)

• Specification sheets for all proposed equipment• W-9 form

• Submit application via email, fax or mail.• An inspection may be required during application

review; applicants requiring inspection will becontacted for scheduling.

Step 6. Submit Final Application• Complete all fields for Final Application Agreement.• Update the application if measures/equipment differs

from pre-application.• Final Application must be submitted with:

• Dated and itemized material invoice• External labor invoice (if applicable)• If Pre-Approval Application was not submitted,

include the documents listed on Step 5• If the project has a pre-approval, add the project ID

number on the top left field on page 2 as the AEPApplication Number

• Submit application via email, fax or mail.• An inspection may be required during application

review; applicants requiring inspection will becontacted for scheduling.

• Self-Direct applications require additional steps. Pleasesee the Self-Direct Terms and Conditions for details.

AEP Ohio Business Incentives Program 700 Morrison RoadGahanna, OH 43230877-541-3048 | [email protected] our website at AEPohio.com/solutions

Final Applications must be submitted before November 13, 2020 in order to qualify for incentives identified in this application.Please read and follow all the steps below to ensure your application is accepted and processed in a timely manner.

mailto:[email protected]

http://www.AEPohio.com/solutions

https://aepohio.com/global/utilities/lib/docs/save/business/programs/aepohio/2018_Efficient_Products_Terms_and_Conditions_and_Final_Payment_Agreement.pdf


https://aepohio.com/global/utilities/lib/docs/save/business/programs/aepohio/2018_Self-Direct_Terms_and_Conditions_and_Final_Payment_Agreement.pdf









LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18



Applicant Information – Agriculture

AEP Application Number AEP - _ _ - _ _ _ _ _ Application Type ______________________

CUSTOMER INFORMATION

Business Name ______________________________________________________________________________________________________

Taxpayer ID _______ - ________________________________ W-9 Tax Status ______________________________________________

Project Name (if applicable) ____________________________________________________________________________________________

Name as It Appears on Utility Bill ______________________________________________________________________________________

AEP Ohio Account Numbers for this Project ________________________ _________________________ ______________________

r Check if mailing address and project site address are the same.

Project Site Address _________________________________ City ___________________________ State _________ Zip ____________

Building Type ________________________________________ Shift ________________________________________________________

Annual Operating Hours _______________________________ Building Area (sq. ft.) _____ ___________________________________

Construction Type ____________________________________ Does the facility have a data center? ___________________________

PROJECT INFORMATION

CUSTOMER MAILING ADDRESS

Contact Name _______________________________________ Contact Title _________________________________________________

Mailing Address _____________________________________ CCity ___________________________ State _________ Zip ____________

Phone _______________________________ Ext. ___________ Contact Email ________________________________________________

How Did You Hear About the Program? _______________________________ AEP OH Energy Advisor __________________________









LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18



Company Name _______________________________________________________________________________________________________

Contact Name _______________________________________ Title of Contact _____________________________________________

Mailing Address _____________________________________ CCity ___________________________ State _________ Zip ____________

Phone _______________________________ Ext. _____________ Contact Email ________________________________________________

Contact Name_________________________________________ Title of Contact ______________________________________________

Phone _______________________________ Ext. _____________ Contact Email _______________________________________________

CONTRACTOR INFORMATION

PRIMARY CUSTOMER CONTACT INFORMATION

Incentive Summary TableINCENTIVE CATEGORY TOTAL INCENTIVES

LIGHTING

MOTORS & DRIVES

AGRICULTURE

PROCESS EFFICIENCY

TOTAL INCENTIVES

Applicant Information – Agriculture

Who should we contact with questions about the application? r Customer r Contractor r Energy Advisor









LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18



Customer AgreementAPPLICATION AGREEMENT

By signing this document, I agree to program requirements outlined in the measure specifications, Terms and Conditions for the applicable program and Final Application Agreement. As an eligible customer, I verify the information is correct and request consideration for participation under this program. Furthermore, I concur that I meet all eligibility criteria in order to receive payment under this program.

Link to Efficient Products for Business/Process Efficiency Terms and Conditions, and Final Application Agreement

Link to Self-Direct Terms and Conditions, and Final Application Agreement

Pre-Application Final-Application

Project Completion Year ________________________ Self-Direct ____________________________________________

Project Completion Date __________________________ Total Project Cost ________________________________________

Total Requested Incentive1 ________________________ Total Self-Direct Requested Incentive2 ______________________

Print Name Date AEP Ohio Customer Signature

_____________________________ ____________ ____________________________________________

PRINT APPLICATION

1Incentives have a threshold of 50% of the project cost and total incentives paid to a threshold of $25,000 and Bid4Efficiency above that.2Self-Direct incentives are 75% of Total Requested Incentive, after 50% of the project cost threshold and tiering is applied.

AEP Application Number AEP - _ _ - _ _ _ _ _

https://aepohio.com/global/utilities/lib/docs/save/business/programs/aepohio/2018_Self-Direct_Terms_and_Conditions_and_Final_Payment_Agreement.pdf










LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18



By signing this document, I authorize the payment of the incentive to the third party named above and understand that I will not receive the incentive payment from AEP Ohio. I also understand that my release of the payment to a third party does not exempt me from the program requirements outlined in the measure specifications, Terms and Conditions, and Final Application Agreement.

Complete this section ONLY if incentives check should be made out in any way other than to the AEP Ohio customer exactly as their name appears on the AEP Ohio account

THIRD PARTY PAYMENT RELEASE AUTHORIZATION (NOT APPLICABLE TO SELF-DIRECT)

Make checks payable to: Company/Individual _________________________________________________________________________________

Mailing Address _________________________________________________ City______________________ State________ Zip__________

Phone _____________________ Ext. _______

Taxpayer ID of 3rd Party _____ - _______________________ W-9 Tax Status __________________________________________

Print Name Date AEP Ohio Customer Signature

_____________________________ ____________ ____________________________________________

Third Party Payment Release









LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18



Lighting Specifications

Lighting Controls Specifications

Projects will qualify to receive the higher “With Controls” wattsreduced incentive rates ($0.25 & $0.30) when:• Controls are already present for the area included in the entire

scope of work• Controls are added to all spaces required by ASHRAE 90.1.

2010, see list below• Controls are NOT a viable option for a valid reason (e.g., 24/7

manufacturing operation or office space over 250 sq. ft.)

In order to qualify for the higher incentive, lighting controls are required in these spaces:• classrooms and lecture halls• conference, meeting, and training rooms• employee lunch and break rooms• storage and supply rooms between 50 - 1,000 sq. ft.• rooms used for document copying and printing• office space up to 250 sq. ft.• restrooms• dressing, locker, and fitting rooms

Watt Reduced Incentives Rate Summary Type A and B TLED, down-lights, wall-packs, and flat panel are no longer eligible for watt reduced. Please refer to the “Incentive NOW” Program.

INCENTIVES CATEGORY

WITH CONTROLS WITHOUT CONTROLS

INCENTIVES RATE ($/WATT REDUCED)

INCENTIVES RATE ($/WATT REDUCED)

ENERGY STAR or Design Lights Consortium LED (ES or DLC LED)

$0.30 $0.19

Other LED $0.25 $0.14

Additional Incentives Paid for Adding Controls to Lighting

EQUIPMENT TYPEINCENTIVES

RATE ($/WATT CONTROLLED)

Occupancy Sensor $0.08

Daylighting Control $0.08

Time Clock for Lighting $0.02

Daylighting Control With Occupancy Sensor $0.10

Photocell $0.02

Photocell and Time Clock $0.04

Bi-Level Lighting Controls $0.10

Networked Lighting Controls Incentives of $0.30 - $0.75/square foot are available on a separate application form.

https://www.aepohio.com/save/business/programs/ApplicationCenter.aspx

https://www.aepohio.com/save/business/programs/IncentiveNow/Default.aspx


See program specifications to check eligibility for incentives. Use the wattages listed in the program specifications for the existing lighting.

SPACE TYPE

INCENTIVE CATEGORY

EXISTING LIGHTING NEW LIGHTING INCENTIVES

LAMP TYPELAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

DESCRIPTIONLAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

$/WATTS REDUCED

TOTAL

Interior Other LED 4’ T12 34 2 20 59 LED Tube Type C 12 2 20 24 $0.25 $175.00

Exterior DLC/ES LED Metal Halide 1,000 1 10 1,080 LED Corncobb 325 1 10 325 $0.30 $2,265.00

Total

EXAMPLE

7Efficient Products for Business, Process Efficiency & Self-Direct | 2020 Agriculture Program Application - November 2019

Link to Specifications

7Efficient Products for Business, Process Efficiency & Self-Direct | Program Application - November 2017


LightingWATTS REDUCED WORKSHEETSee program specifications to check eligibility for incentives. Use the wattages listed in the program specifications for the existing lighting.Does any area included in this project have lighting controls (Occupancy sensor, timeclock, photocell, etc.)? Yes No Adding Not Viable

SPACE TYPE

INCENTIVE CATEGORY


LAMP TYPELAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

DESCRIPTIONLAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

$/WATTS REDUCED

TOTAL

Interior DLC/ES LED 4’ T8 32 2 15 59 LED Fixture NA NA 15 25 $0.31 $158.10

Interior Other LED 4’ T12 34 2 20 59 LED Tube 12 2 20 24 $0.27 $178.20

Exterior DLC/ES LED Metal Halide 400 1 10 458 LED Corn Lamp 35 1 10 35 $0.31 $1131.50

TotalLink to Additional Worksheet

(Select One) (Select One) (Select One)
















Type A and B Tubular LED, down-lights, wall-packs, and flat panels are no longer eligible for watt reduced. Please refer to the “Incentive NOW” Program.

Lighting – Watts Reduced With Existing Lighting Controls

Incentives for replacing T12 fluorescent lighting equipment will be calculated using the wattage from an equivalent T8 fixture. Please refer to the specifications for the list of standard wattages for the T8 fixtures.

http://www.aepohio.com/global/utilities/lib/docs/save/business/programs/AEPOhio/2020/2020_Application_Specification.pdf




SPACE TYPE

INCENTIVE CATEGORY


LAMP TYPELAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

DESCRIPTIONLAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

$/WATTS REDUCED

TOTAL



Total

EXAMPLE






SPACE TYPE

INCENTIVE CATEGORY


LAMP TYPELAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

DESCRIPTIONLAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

$/WATTS REDUCED

TOTAL























Lighting – Watts Reduced Adding Lighting Controls





SPACE TYPE

INCENTIVE CATEGORY


LAMP TYPELAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

DESCRIPTIONLAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

$/WATTS REDUCED

TOTAL



Total

EXAMPLE






SPACE TYPE

INCENTIVE CATEGORY


LAMP TYPELAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

DESCRIPTIONLAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

$/WATTS REDUCED

TOTAL























Lighting – Watts Reduced Lighting Controls Not Viable









SPACE TYPE

INCENTIVE CATEGORY


LAMP TYPELAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

DESCRIPTIONLAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

$/WATTS REDUCED

TOTAL






















SPACE TYPE

INCENTIVE CATEGORY


LAMP TYPELAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

DESCRIPTIONLAMP

WATTAGELAMP/

FIXTUREFIXTURE

QTYFIXTURE WATTS

$/WATTS REDUCED

TOTAL



Total*Please refer to page 7 of this application for requirements for controls per ASHRAE .Incentives for replacing T12 fluorescent lighting equipment will be calculated using the wattage from an equivalent T8 fixture. Please refer to the specifications for the list of standard wattages for the T8 fixtures.

Lighting – Watts Reduced Without Lighting Controls*

EXAMPLE













LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18




LIGHTING CONTROLS WORKSHEET

Lighting controls incentives are only available for new controls. Existing or replacement controls do not qualify for incentives.

SPACE TYPE CONTROL TYPE FIXTURE TYPECONTROLLED

FIXTURE QUANTITY

FIXTURE WATTS

$/WATTS CONTROLLED INCENTIVES

Interior Occupancy/Vacancy 4’ 4 Lamp T8 50 112 $0.08 $448

Total

Lighting

EXAMPLE










LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18




Motors WorksheetPlease ensure all equipment meets program requirements by reviewing the specifications.

NEMA PremiumTM Efficiency Criteria—Qualifying motors must meet the minimum efficiencies below.

HORSEPOWER1200 RPM-OPEN ACTUAL MOTOR

EFFICIENCY QUANTITY INCENTIVE UNIT

INCENTIVE/UNIT INCENTIVE

QUALIFYING EFFICIENCY1 82.6% per Motor $8.00

1.5 86.6% per Motor $10.00

2 87.6% per Motor $13.00

3 88.6% per Motor $20.00

5 89.6% per Motor $25.00

7.5 90.3% per Motor $40.00

10 91.8% per Motor $45.00

15 91.8% per Motor $60.00

20 92.5% per Motor $75.00

25 93.1% per Motor $80.00

30 93.7% per Motor $90.00

40 94.2% per Motor $100.00

50 94.2% per Motor $120.00

60 94.6% per Motor $130.00

75 94.6% per Motor $140.00

100 95.1% per Motor $190.00

125 95.1% per Motor $238.00

150 95.5% per Motor $285.00

200 95.5% per Motor $380.00

250 95.5% per Motor $475.00

HORSEPOWER1200 RPM - CLOSED ACTUAL MOTOR




1.5 87.6% per Motor $10.00

2 88.6% per Motor $13.00

3 89.6% per Motor $20.00

5 89.6% per Motor $25.00

7.5 91.1% per Motor $40.00

10 91.1% per Motor $45.00

15 91.8% per Motor $60.00

20 91.8% per Motor $75.00

25 93.1% per Motor $80.00

30 93.1% per Motor $90.00

40 94.2% per Motor $100.00

50 94.2% per Motor $120.00

60 94.6% per Motor $130.00

75 94.6% per Motor $140.00

100 95.1% per Motor $190.00

125 95.1% per Motor $238.00

150 95.9% per Motor $285.00

200 95.9% per Motor $380.00

250 95.9% per Motor $475.00

Total










LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18




HORSEPOWER1800 RPM - OPEN ACTUAL MOTOR



QUALIFYING EFFICIENCY

1 85.6% per Motor $8.00

1.5 86.6% per Motor $10.00

2 86.6% per Motor $13.00

3 89.6% per Motor $20.00

5 89.6% per Motor $25.00

7.5 91.1% per Motor $40.00

10 91.8% per Motor $45.00

15 93.1% per Motor $60.00

20 93.1% per Motor $75.00

25 93.7% per Motor $80.00

30 94.2% per Motor $90.00

40 94.2% per Motor $100.00

50 94.6% per Motor $120.00

60 95.1% per Motor $130.00

75 95.1% per Motor $140.00

100 95.5% per Motor $190.00

125 95.5% per Motor $238.00

150 95.9% per Motor $285.00

200 95.9% per Motor $380.00

250 95.9% per Motor $475.00

HORSEPOWER1800 RPM- CLOSED ACTUAL MOTOR




1.5 86.6% per Motor $10.00

2 86.6% per Motor $13.00

3 89.6% per Motor $20.00

5 89.6% per Motor $25.00

7.5 91.8% per Motor $40.00

10 91.8% per Motor $45.00

15 92.5% per Motor $60.00

20 93.1% per Motor $75.00

25 93.7% per Motor $80.00

30 93.7% per Motor $90.00

40 94.2% per Motor $100.00

50 94.6% per Motor $120.00

60 95.1% per Motor $130.00

75 95.5% per Motor $140.00

100 95.5% per Motor $190.00

125 95.5% per Motor $238.00

150 95.9% per Motor $285.00

200 96.3% per Motor $380.00

250 96.3% per Motor $475.00

Total











LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18




Page 14

HORSEPOWER3600 RPM - OPEN ACTUAL MOTOR




1.5 84.1% per Motor $10.00

2 85.6% per Motor $13.00

3 85.6% per Motor $20.00

5 86.6% per Motor $25.00

7.5 88.6% per Motor $40.00

10 89.6% per Motor $45.00

15 90.3% per Motor $60.00

20 91.1% per Motor $75.00

25 91.8% per Motor $80.00

30 91.8% per Motor $90.00

40 92.5% per Motor $100.00

50 93.1% per Motor $120.00

60 93.7% per Motor $130.00

75 93.7% per Motor $140.00

100 93.7% per Motor $190.00

125 94.2% per Motor $238.00

150 94.2% per Motor $285.00

200 95.1% per Motor $380.00

250 95.1% per Motor $475.00

HORSEPOWER3600 RPM - CLOSED ACTUAL MOTOR




1.5 84.1% per Motor $10.00

2 85.6% per Motor $13.00

3 86.6% per Motor $20.00

5 88.6% per Motor $25.00

7.5 89.6% per Motor $40.00

10 90.3% per Motor $45.00

15 91.1% per Motor $60.00

20 91.1% per Motor $75.00

25 91.8% per Motor $80.00

30 91.8% per Motor $90.00

40 92.5% per Motor $100.00

50 93.1% per Motor $120.00

60 93.7% per Motor $130.00

75 93.7% per Motor $140.00

100 94.2% per Motor $190.00

125 95.1% per Motor $238.00

150 95.1% per Motor $285.00

200 95.5% per Motor $380.00

250 95.9% per Motor $475.00

Total











LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18




DRIVES WORKSHEET

MOTOR SIZE (HP) VSD APPLICATION MOTOR USE QUANTITY ANNUAL EQUIPMENT

OPERATING HOURSINCENTIVE/

HP INCENTIVES

Total

Total Motors & Drives Incentive

MOTOR REWIND APPLICATION CAN BE FOUND HERE.

Motors & Drives

https://www.aepohio.com/save/business/programs/ApplicationCenter.aspx










LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18




Page 16

AGRICULTURE WORKSHEET

MEASURE INCENTIVE UNIT QUANTITY INCENTIVE/UNIT INCENTIVES

VSD on Dairy Milking Pump

Vacuum Pump HP $120.00

Transfer Pump100 Gallons of Daily

Milk Production$10.00

Low-Pressure Sprinkler Nozzle Nozzle $0.50

Sprinkler to Drip Irrigation Acre $35.00

Block Heater Timer Unit $25.00

Fan Thermostat Controller HP $50.00

High-Speed Fans

24” to 35” Fan Blade Diameter Fan $30.00



High-Volume Low-Speed (HVLS) Fans

16’ Fan Blade Diameter Fan $250.00





Scroll Compressors for Dairy Refrigeration

with plate cooler heat exchanger lb. Milk/Day $0.04

without plate cooler heat exchanger lb. Milk/Day $0.04

Livestock Waterers Unit $125.00

Milk Pre-Cooler Heat Exchanger (Chiller Savings) lb. Milk/Day $0.10

Water Pre-Heat Heat Exchanger (Water Heating Savings)¹ lb. Milk/Day $0.16

New Single Heat Mat per Heat-Mat $50.00

New Double Heat Mat per Heat-Mat $100.00

New Grain Dryer

Capacity <500 Bushels per hour Dryer $250.00

Capacity ≥500 and <1000 Bushels per hour

Dryer $750.00

Capacity ≥1000 and <2000 Bushels per hour

Dryer $1,250.00

Total Agriculture Incentive

Agriculture










LIGHTING 7

HVAC 9

MOTORS & DRIVES 12

COMPRESSED AIR 14


AGRICULTURE 17

MISCELLANEOUS 18




Process Efficiency

PROCESS EFFICIENCY WORKSHEET

Please select the calculation methodology used for estimating the savings. Bin Analysis Energy Modelling Software Engineering Formulas Pre & Post Metering Other _________________

DETAILED PROJECT SUMMARY

BASELINE EQUIPMENT

PROPOSED EQUIPMENT

SUB CATEGORY ANNUAL HOURS EQUIPMENT LIFE (YEARS)

ENERGY SAVINGS (kWh) INCENTIVES PER kWh

$0.07

Total Process Efficiency Incentive

The project simple payback, without the incentive payment, must be greater than one year and less than seven years, or pass the cost effectiveness test determined by AEP Ohio to qualify for incentives. Incentives have a threshold of 50% of the project cost and have a $25K threshold before BID4E rates apply.

All Process Efficiency projects require Pre-Approval. Final applications without pre-approval may be denied at AEP Ohio’s discretion. All savings calculations must be submitted with the applications in executable format.


Documents

Efficient Products for Business, Process Efficiency & Self ... · November 2019 Efficient Products for Business, Process Efficiency & Self-Direct Agriculture Program Application 2020