Electric Heating - Tersus

Electric HeatingImprove the comfort of your home

3

4

6

8

9

10

11

11

12

13

14

14

Company History

Panel Heater Accessories

Panel Heaters Models P and L

TP 100 Energy Savings Unit

iJaz Central Heating System

Glass Fronted Convector Heaters

K3TK-2 Small Room Heater

KRB Infrared Heaters

Ingress Protection Rating

GME 1500 T Portable Convector Heater

VTE 2000 Fan Heater

Technical Specifications

page

Contents

When you choose Beha, you choose quality. The products are built to last for years. We are so certain about the quality that we offer a 5 year guarantee on all heaters. All products are controlled and certified for your safety!

Front cover: Gaustatoppen in Telemark, Norway. Photo: Stein Øyvind Bystrøm.

2

Company History ofBeha was established in 1917 in Porsgrunn, Norway as manufacturer of electric heaters and cookers. Beha is one of the oldest and most traditional electrical manufacturers in Norway, still in operation under the same family ownership. The product groups produced by the company today are exactly the same as those produced by the company at the time of its founding – electric cookers and heaters. This expertise, developed over many years, and the fact that Beha has always been at the leading edge of developing new technology and improved production methods creates a sound basis for the company’s excellent reputation in the market.

1: Convector heater,1925. 2: Beha factory, 1924. 3: Infrared heater, 1964. 4: Convector heater, 1964. 5: Beha factory, 2014. 6: Convector heaters with mechanical thermostat, 1976.

5

6

2

1

4

3

3

High Accuracy Electronic ThermostatThe accurate thermostat maintains a stable room temperature for maximum comfort and economy. A correct calculation of necessary heating capacity is of high importance.

Hot air front outletThe heat outlet on the front panel, guiding the warm airflow away from the wall is reducing the possibilities of dust collection and soot deposits above the heater.

Thermostat Protective Cover All heaters come with a lockable dust cover on the control panel. For installation in schools and public buildings the cover can be fixed, removable only by an authorized person.

Feet for BEHA P and L heatersWhen using the BEHA heater as a free standing floor heater please note that the IP protection class will be reduced to IP 20, the heater can thus not be used in bathrooms or other damp areas where prote-ction class IP 24 is required.

Panel Heater AccessoriesBEHA convector heaters are intended for full central heating with a large variety of models covering most needs. The heaters are simple to install and more user friendly than ever.

As the heaters become smaller, the effect is still the same. BEHA Convector Heaters are approved and certified according to international CCA specifications EN 60335 and carry the CE mark, thus complying with European safety standards and stan-dards for electromagnetic compatibility. All BEHA Convector Heaters, are tested and approved for IP 24 rating (splash proof) and can be installed in bathrooms and othe r damp areas.

InstallationBEHA Convector Heaters are designed to fit in at the coldes t part of the home – underneath the windows. The required distance to nearest combustible building part is reduced, so you can safley install your heater under a window and close to

a corner. The heaters can be installed in 2 ways and are supplied with a 1,5 m electrical lead and European plug. A junction box for fixed installation can be fitted on the cross rail of the wall bracket. The junction box is supplied separately.

Advanced heating elementsThe heating elements have aluminium fins with perforations and a large surface, distributing the heat in an effective way. The critical temperature for dust-burning is 225ºC. In a Beha convector heater this temperature will occur only for a short period when the heater is switched on in a cold room. After a short while the ele-ment temperature will stabilize at 90ºC. Therefore the front panel’s surface-tempe-rature will be under the prescribed 80ºC.

5 cm

3 cm

2 cm

Minimum distances to building parts.

4

Large varietyBeha heaters come in 2 hights and 11 different models. See all models on page 6 and 7.

Additional functionsAdditional functions are available by using plug-in modules with the P and L series heaters. The plug-in module slides into the slot next to the thermostat. The slot is covered by a blank cover when not in use. Plug-in modules for additional functions can be installed at any time after purchase and fitting of a BEHA Heater.

Simple and flexible installationThe heaters can be installed in 2 ways and are supplied with a 1,5m electrical lead and European plug. A junction box for fixed installation can be fitted on the cross rail of the wall bracket. The junction box is supplied separately.

Critical temperature for dust burning 225ºC225°C

200°C

150°C

100°C

50°C

0°C

Start time 1 hour 2 hours

Maximum operating temperature of heating elements

Frost guardAll BEHA Convector Heaters have a built-in “frost guard” symbolis ed by a snow crystal on the thermostat temperature setting wheel. This function ensures that the room temperature will not drop below 5°C even if the thermostat temperature whee l is turne d towards the off position.

Bathroom installationThe heater can be installed in different rooms, including bathrooms, kitchens and utility rooms etc. The heaters are approved by all major approval regulators and have protection class IP 24.

Easy cleaningThe heater tilts forward on the fixing bracket for the ease of cleaning behind.

Electronic ThermostatAll BEHA Convector Heaters are fitted with an on/off switch and a triac controlled electronic thermostat maintaining a stable room temperature. The thermostat’s typical deviation is 0,2°C at 20°C room temperatu re.

Double insulatedFor safe installation and operation the panel heaters are double insulated and can be conne-cted to any 220–240V wall power outlet, earthed or not earthed.

5 year guaranteeWe offer a 5 year guarantee on all heaters.

YEARS

GUARANTEE5

5

Panel Heaters Models P and L

L 12

Width: 1669 mmWattage: 1250 W

L 10


L 7


L 5


The P and L series comes with electronic thermo stat, electrical lead and European plug. Junction box for fixed installation can be ordered in addition. All heaters in both P and L series are ready for installation of the energy saving module TP 100 (page 8) or the central control iJaz RP 200 (page 9). The heating elements have virtually ulimited life, so you will be able to enjoy the snug and cosy heat for years to come.L

Hight: 20 cm

6

The P and L series are available in two different heights, 20 cm and 40 cm. Both series include a variety of wattages and you are sure to find a model that suits you and your heating needs. The heater series will provide from 400 to 2000 watts. The P series fits perfectly where there is plenty of room under the window, while the L series fits better where the height from the floor to the window is lower.

P 8


P 6


P 4


P 20


P 15


P 12


P 10


PHight: 40 cm

7

Accessories

TP 100 Energy Savings Unit

Programmable temperature reduction moduleSelectable economy options are available with the energy saving module. The module has 3 pre-programmed sleeping modes lowering the temperature by 5°C from the set thermostat temperature.

> Simple to use – simple to fit.

> Individual unit used independently of the iJaz system.

> For use with BEHA environmental heaters type P and L produced after August 2005.

> Program memory at power cut.

> The 7-hour lowering programme is used for lowering the temperature at night, e. g. from 11pm to 6am. The programme works 7 days a week.

> The 5-hour programme is used when a room is vacant during the daytime and is normally used in combination with the 7-hour programme. The programme works 5 days a week.

> The 15-hour programme is used for lowering room temperature during night time and day time when at work or school. The programme is active 5 days a week.

Any of the programmes can be overridden by pressing the pause button. During the pause period the ther-mostat setting controls the heater. When pressing the pause button again the programmes go back to the original setting. All programme settings are indicated by illuminated lights diodes when activated.

Additional functions are available by using plug-in modules with the P and L series heaters. The plug-in module slides into the slot next to the thermostat. The slot is covered by a blank cover when not in use. Plug-in modules for additional functions can be installed at any time after purchase and fitting of a BEHA heater.

8

With Beha iJaz system you can easily control Beha heaters in every room using iJaz radio plug RP 200. Turn on/off car engine heaters, lights, etc. with iJaz power switch SP 16.

iJaz is a simple and user friendly control system to assemble even without the need for extra wires. The system is completely wireless. In the event of a power cut the iJaz system has a backup for clock and date for at least three days. Programmed zones are stored independently of the battery and will not be affected by power cuts.

Wireless control!Easy to install.

Save energy, save the environment and save money with wireless controlled electric central heating.

iJaz power switch SP 16

> Wireless switch for BEHA iJaz system

> Up to 3600 W

> Function viewed by light diodes

> Separate on/off button

iJaz wireless receiver RP 200

> Wireless receiver for BEHA iJaz system

> To be fitted on BEHA panel heaters type P and L post 2005 models

> Pause button for automatic cancelling of programme

> Functions indicated by light diodes

> 4 functions; normal, lower by 5°C, frost safeguard and OFF

> Automatic ”cold draft” function when opening windows

iJaz Central Control

> Wireless communication with BEHA panel heaters having RP 200 fitted and with power switches SP 16

> No installation required

> User friendly design with touch display

> Can control up to 16 zones

> Innumerable number of products per zone

> Built-in transmitter and receiver

> 433 MHz, 300 m free range

> Can be controlled via GSM module (remote control)

> Built in thermometer with digital viewing

Coming soon!

app

Accessories

iJaz Central Heating System

9

Glass Fronted Convector HeatersThe BEHA convector heater with glass front is designed and manufactured by BEHA Norway, based on the well known BEHA technology and quality. The stylish heaters with their pure white glass fronts are a beautiful alternative in more sophisticated environments to our well known standard heaters. The heaters come with the high quality BEHA thermostat and can be connected to the iJaz wireless remote control system as well as the energy savings unit TP 100.

> Tempered glass

> No dust burning – indoor climate friendly

> Small safety distances

> Triac controlled electronic thermostat

> Well proven technology

> Can be used with iJaz and TP 100

Tempered Glass The glass front of the PG and LG heaters is a pure white 4 mm tempered glass plate. Maximum temperature on the front is 60ºC under normal operation.

Skirtingboard Heaters

Panel Heaters

Thermostat Protective Cover All heaters come with a lockable dust cover on the control panel. For installation in schools and public buildings the cover can be fixed, removable only by an authorized person.

High Accuracy Electronic ThermostatThe accurate thermostat maintains a stable room temperature for maximum comfort and economy. A correct calculation of necessary heating capacity is of high importance.

Additional functionsCan be used with iJaz and TP 100. The plug-in module slides into the slot next to the thermostat.

PG 6

PG 8

PG 10

PG 12

LG7

LG 10

10

K3TK-2 Small Room Heater

KRB Infrared Heaters KRB 1000 Infrared Heater

> For mounting on bathroom walls

> IP 24

> Hight 70 mm, width 792 mm

> White with switch

> 1000 Watt

KRB 750 Infrared Heater


> IP 24


> White with switch

> 750 Watt

KRB 500 Infrared Heater


> IP 24


> White with switch

> 500 Watt

Beha infrared heaters are ideal for bathrooms and other rooms where radiating heat is required. The heaters are manufactered to a high standard and quality. Because of the efficient heating elements the room will quickly have a pleasant and warm temperature.

The Beha small wall-mounted heater is ideal for rooms with limited space. The heater is 300 watt and is the perfect choice for small corridors, toilets or other small rooms. The heater is equipped with a mechanical thermostat of a high standard, including on/off switch. It comes with cable and earthed plug, or can be wired directly. The heater is very robust and produced in steel.

> For mounting on walls in small rooms

> IP 21


> Mechanical thermostat and on/off switch

> White with cable and earthed plug (length 0,8 m)

> 300 Watt

11

Ingress Protection – IP – is an international classification characterising the level of protection for electrical appliances. The protection can be against intrusion of fingers, dust or water. The first digit of the number designates protection from objects and the second digit protection from moisture. Consequently the installation of electric heaters in bathrooms and other damp areas will require special consideration to ingress protec-tion (IP-class) of the product and where in the room it will be installed.

Bathroom zones Zone 0: Inside the bath or shower. Any fitting must

be maximum 12V and a minimum of IPX7 (protected against immersion in water).

Zone 1: Above the bath or shower to a height of 225 cm. A minimum rating of IPX4 is required (see note 1).

Zone 2: The area stretching to 60 cm outside the bath or shower and above the bath or shower. An IP rating of at least IPX4 is required (see note 1).

Zone 3: Anywhere outside of zones 0, 1 and 2. Where water jets are not to be used for cleaning purposes general rules apply.

Note 1: In zones 1 and 2, if there is a likelihood of water jets being used for cleaning purposes, a minimum of IPX5 is required.

Note 2: The information contained on this page is for guidance only. The current IEE regulations and code of practice will always prevail.

First digit

Protection from solid objects

Second digit

Protection from moisture

0 No protection 0 No protection

1 Protection against objects > 50 mm 1 Protection against

vertically dripping water

2 Protection against objects > 12,5 mm 2 Protection against water

when tilted +/- 15°

3 Protection against objects > 2,5 mm 3 Protection against

spraying water

4 Protection against objects > 1,0 mm 4 Protection against

splashing water

5 Dust protected 5 Protection against jetting water

6 Dust tight 6 Protection against heavy jetting water

7 N/A 7 Protection against temporary immersion

8 N/A 8 Protection against continuous immersion

iP-class descriptions

225

cm

60 cm

240 cm

Bathtub

225

cm

60 cm

60 cm

240 cm

Shower without floor tub

225

cm

60 cm

240 cm

Shower with floor tub

0

0 0

1

1 1

2

2 2

3

3 3

If there is only one class of protection, you may see an “X” designation in place of one of the digits.

Example – IP 24An electrical apparatus rated IP 24 is protected against:

- Solid objects over 12mm, e.g. insertion of fingers- Protection against splashing water

Ingress Protection Rating

12

GME 1500 T Portable Convector Heater

Modern design and cost effective heating improves your indoor comfort.

The portable convector heater GME 1500 T is designed and manufactured at our modern production facilities in Norway. Due to its robust design and high quality it can be used as permanent as well as supplementary heating. The unique heating principle and design makes it the very best solution available for a good indoor climate.

GME 1500 T has a built-in programmable temperature reduction module. Selectable economy options are available by 3 pre-pro-gramming sleeping modes lowering the temperatures 5ºC from the set thermostat temperature.

The 7-hour lowering programme is used for lowering the temperature at night, e.g. from 11pm to 6am. The program works 7 days a week.

The 5-hour programme is used when a room is vacant during daytime and is normally used in combination with the 7-hour program. The programme works 5 days a week.

The heating elements are fitted in specialyy designed slides to prevent the elements from creating unwanted noises due to the natural expansion and contraction. This makes GME 1500T a totally silent convector heater.

The heating elements are made of extruded aluminium with cooling fins and perforations. This special design gives an expanded surface area and a unique heat distribution, reducing the surface temperature.

With Integrated Energy Savings Unit

Thermostat Protective Cover All heaters come with a lockable dust cover on the control panel.

The 15-hour programme is used for lowering the room temperature during night time and day time when att work or school. The programme is active 5 days a week.

Any programme can be overridden by pressing “PAUSE” button. During the pause period the thermostat setting controls the heater. When pressing the “PAUSE” button again the programmes go back to the original setting. All programme settings are indicated by illuminated light diodes when activated.

13

Type W Regulating W Thermostat Measurements Weight IP Rating GTIN/EAN number

GME 1500 T 1500 0 - 1500 Electronic 422 x 170 x 635 mm 8,90 kg IP 20 7026573171506

Type W Regulating W Thermostat Measurements(H x D x W) Weight IP Rating GTIN/EAN number

K3TK-2 1500 0 - 1500 Mechanical 250 x 80 x 300 mm 1,95 kg IP 21 7026573171506

Cable: 0,8 m with plug. Free distance to sides: 5 cm. Free distance above: 15 cm. Free distance below: 5 cm. Distance between fixing screws: 29 cm


VTE 2000 2000 0 - 800 - 1200 - 2000 Electronic 240 x 150 x 280 mm 2,70 kg IP 20 7026573102555


Free distance to sides: 15 cm. Free distance above and in front: 30 cm.

KRB 500 500 0 - 120 - 200 - 300 - 500 No 70 x 160 x 442 mm 1,35 kg IP 24 7026573175009

KRB 750 750 0 - 180 - 300 - 450 - 750 No 70 x 160 x 606 mm 1,65 kg IP 24 7026573177508

KRB 1000 1000 0 - 230 - 350 - 650 - 1000 No 70 x 160 x 792 mm 2,10 kg IP 24 7026573171001


SMAll RooM HEATER

PoRTABlE coNVEcToR HEATER

fAN HEATER

INfRARED HEATERS

VTE 2000 Fan Heater BEHA’s fan heater is intended for fast heating of cold rooms, and not as a permanent heating source. It is easy to place and very user friendly. The stable and robust steel casing makes it a safe choice.

Beha VTE 2000 is a fan heater with a classical and soft design, which will fit into any kind of interior. The heater is made in steel, and we sincerely believe this is the most secure fan heater in the market. The heater can easily be operated by an 8-step switch. The silent electric thermostat has three effect options: 800, 1200 and 2000 W. In addition, the fan can be regulated to half- or full speed. In case of overturning or overheating, the automatic tem-perature fuse will be deactivate the heater.

> Supplementary heating of cold rooms

> Steel casing, stable and robust design

> Automatic safety switch in case of overturning and overheating

> Silent fan

> Electronic thermostat

> 8-step regulating switch

> 3 power levels, 800W–1200W–2000W

14

Type Description Weight GTIN/EAN number

TP 100 • Energy savings unit for P and L heaters 0,086 kg 7026571100041

iJazCentral Heating System

• Wireless communication with BEHA panel heaters having RP 200 fitted and with power switches SP 16• No installation required• User friendly design with touch display• Can control up to 16 zones

• Innumerable number of products per zone• Built-in transmitter and receiver• 433 MHz, 300 m free range• Can be controlled via GSM module (remote control)• Built in thermometer with digital viewing

0,429 kg 7026571100072

RP 200iJaz Wireless Receiver

• Wireless receiver for BEHA iJaz system• To be fitted on BEHA panel heaters type P and L post 2005 models• Pause button for automatic cancelling of programme

• Functions indicated by light diodes• 4 functions; normal, lower by 5°C, frost safeguard and OFF• Automatic ”cold draft” function when opening windows

0,138 kg 7026571100089

SP 16iJaz Power Switch

• Wireless switch for BEHA iJaz system• Up to 16 Amps• Function viewed by light diodes• Separate off/on button

0,146 kg 7026571100102

KB 200 • Junction box for fixed installation 0,118 kg 7026571100126

Pf 240 • Convector heater feet for P and L heaters 0,364 kg 7026571111054


P 4 400 0–400 Electronic 400 x 83 x 431 mm 2,90 kg IP 24 7026572104185







l 5 500 0–500 Electronic 200 x 83 x 803 mm 2,90 kg IP 24 7026572106202




Specifications common to all P and l heaters

• Standard voltage 220–240V. On request 200V and 400V

• On/off switch and electronic thermostat with triac regulation

• Thermostat accuracy: +/- 0,2ºC at 20ºC room temperature

• Typical surface temperature at normal operation conditions and 20ºC room temperature: 80ºC

• Double insulated

• Splash proof IP 24

• 1,5 m cable with 2-pin European plug

• Depth of heater when mounted on wall: 8,3 cm

• Free distance to combustible material: Below 3 cm, sideways 2 cm, above 5 cm


PG 6 600 0–600 Electronic 423 x 89 x 564 mm 5,8 kg IP 20 7026572106004

PG 8 800 0–800 Electronic 423 x 89 x 688 mm 7,0 kg IP 20

PG 10 1000 0–1000 Electronic 423 x 89 x 812 mm 8,2 kg IP 20 7026572101009

PG 12 1250 0–1250 Electronic 423 x 89 x 936 mm 9,5 kg IP 20

lG 7 700 0–750 Electronic 223 x 89 x 1060 mm 6,0 kg IP 20 7026572107001

lG 10 1000 0–1000 Electronic 223 x 89 x 1308 mm 7,3 kg IP 20

AccESSoRIES

coNVEcToR HEATERS

GlASS fRoNTED coNVEcToR HEATERS


15

Importer: Dealer:

Beha Elektro AS, 3940 Porsgrunn, Norway | Tel.: +47 35 51 62 50 | Fax: +47 35 51 62 60 | E-mail: [email protected] | www.beha.no

Documents

Electric Heating - Tersus