Upload
others
View
18
Download
0
Embed Size (px)
Citation preview
CATALOG 1707
HYBRID TYPE TWO-COLOR/DISSIMILAR MATERIAL INJECTION MOLDING MACHINEX-PUMP EQUIPPED
SERIES
ELECTRIC TYPE TWO-COLOR/DISSIMILAR MATERIAL INJECTION MOLDING MACHINE
SERIES
1
2-color/dissimilar material molded
products have been widely used for
automotive interior/exterior, industrial
parts, and household goods. NISSEI
double-injection molding machines
can mold high designability and
functionality products in one
process cycle. Inner mold assembly
(integrated molding) can reduce
assembly processes, number of
components, and cycle time as well
as saving mold costs and floor space.
NISSEI double-injection molding
machines remarkably rationalize
production processes while adding
high-values to the products.
"Double Injection" 2-Color/Dissimilar Material Injection Molding Machine
Exploring the Potential of 2-Color/Dissimilar Material Molding
■2-Color/Dissimilar Material Injection Molding
It is an integrated molding method to form products using two different colors or two different types of materials. Molding two types of resin by integrated molding method can eliminate secondary processing (such as adhering), increase production speed, improve efficiency, and create high designability and functionality products.
①Primary molding ②Secondary molding
2
DCX400Ⅲ
DCX200Ⅲ
DCX120ⅢDCE140Ⅲ
DCE250Ⅲ
DCX600ⅢDCX800Ⅲ
36A-36A
25A-25A
9A-9A
5E-5E 9E-9E 12E-12E
9E-9E 12E-12E 18E-18E 25E-25E
50A-50A
71A-71A
[3944]
[1991]
[1188][1370]
[2450]
[5880][7965]
26 28 32 36 40 45 50 56 63 71
[kN]Clamping forceMachine
Screw diameter [mm] 22
NEW
NEW
NEW
Wide-Ranging Capability in Molding: from Micro Precision Components to Large Products to Intricate Shaped Products
NISSEI's Large 2-Color Injection Molding Machines Now Available Since developing a 2-color machine in 1964, NISSEI has gained abundant experience from their field-
proven 2-color/dissimilar material molding machines.
To be a pioneer in meeting the increasing needs for molding large and intricate products, NISSEI
now offers large 2-color/dissimilar material molding machines above 500-ton clamping force in their
standard lineup.
Clamping unit: 800-ton class clamping force
Injection unit
Screw diameter (mm)
Injection pressure (MPa)
Injection velocity (mm/s)
71A
56 63 71
198 155 122
STD:80 HI:110
■DCX-Ⅲ(Hybrid Type) / DCE-Ⅲ(Electric Type)Series Line-Up.
DCX800Ⅲ-71A(Equipped with options)
3
NISSEI Double Injection's CapabilitiesStandard lineups of 2-color/dissimilar material molding machine series (DCX-Ⅲ and DCE-Ⅲ) include
a wide range of machines in different camping force tonnages, from small 120t class to large 800t
class, offering ideal selections according to the applications and molding methods.
These can also be customized for special molding methods, such as mixed color, multi-layer, and
sandwich moldings.
50
Machine
Clamping force(tf)
DCE60(Special order)
DCX120Ⅲ DCE140Ⅲ DCX200Ⅲ DCE250Ⅲ DCX400Ⅲ
100 200 400
Office communication
equipmentFront panels
IC chipsSmart phone components
Water-tight packingsetc…
AppliancesCovers
SwitchesKeycapsCameras
Brand logosetc…
General goods
Kitchen utensilsToothbrushes
ToysPenholders
etc…
▲Swimming goggle, coaster, cup, tray, case, selector switch, keycap, ventilator, and cap with a lid.
▲Toy parts
▲Thick-wall containers (mixed color/double molding)
▲Small article cases
▲Front panels of mobile phones
4
DCX600Ⅲ DCX800Ⅲ
600 800
*Images on this page are for illustration purpose and are not actual products.
Category Purpose Molding example
Same material molding
Same/different colors
◦Better external appearance◦Improving the durability of decorative parts (words)◦High bond strength
KeycapSwitchSpeedometer needle
Special grade ◦Secondary process, such as coatingMobile deviceCameraBrand logo
Dissimilar material molding
Compatible
Improve functionality that cannot be attained by single shot◦Touch comfort◦Improving watertightness and airtightness◦Improving flexibility and shock resistance◦Decoration
ToothbrushPenholderCapPrinter inkAir bag
Non-compatible ◦Shortening the process of molding sliding components by integrated molding Ventilator
Special molding◦Double molding (Protecting marks and letters) (Protecting insert workpiece)
Over-molded IC chip (module)
We have abundant experience and expertise in variety of molding methods, including 2-color molding molds. Please feel free to contact us.
ContainersCaps
Trays/CupsCosmetic containers
etc…
MedicalMedical devicesDisposable items
etc…
Automotive partsExteriors
HeadlightsInstrument panels
TaillightsInterior parts
VentilatorsAir bags
etc…
5
Clamping
Cooling
Cooling
Metering
Metering
Primary injection
Secondary injection
Mold open/rotation Ejection
2-Color Molding by Core Rotation Method
"DC Type" 2-Color Molding by Core Rotation Method
High-Speed & Shock-Less Rotation
High-Precision Clean Non-Contact Rotation & Pull Mechanism
The movable platen is equipped with a rotation mechanism. After molding the primary part, it rotates the mold to the secondary side and fills resin into the space between the primary molded part and cavity. Since it swaps the primary and secondary cavities completely, it has less shape restrictions than that of core-back types, making molding of intricate shaped products possible. Since the gate mark from the primary side can be covered with the secondary side resin, it is ideal for products with complicating design and letters on flat surface, such as keycaps, as well as products with patterns on the side or sliding sections.
DCE-Ⅲ and DCX-Ⅲ Series achieve high-speed and shockless rotation motion. Rotation during mold open ("rotation to ejection" sequence) is possible, contributing to shorten the cycle time. Speeding up the ejector's movement within the rotary table is also possible to make cycle time faster.
* Ejection before rotation is possible.
The rotary mechanism uses non-contact rotation & pull system, which pushes the rotary table before rotation and pulls it back after rotation. It sustains the precision of the rotary table for a long time and prolongs the lives of the molds. The rotary mechanism does not require a large amount of grease and is very clean.
High-temperature control hose
and core pull piping can be run
through the center of the rotary
table.
◀DCE-Ⅲ Series (Electric Type /Standard Equipment)
◀DCX-Ⅲ Series (Hybrid Type /Optional Equipment)
Optional equipment example: DCX400 Ⅲ-36A (Euro Specs)1. Insulation plate A & B2. 2 core pull circuits3. Additional mold mounting holes
Secondary molding
Molding process
Primary molding
Molding Cycle
A
B
A
B
A
B
Primary molding
Secondary molding
Gate mark on the primary molded part can be covered by the secondary resin.
Movable platen
Stationary platen
Rotary mechanism
Reversing motion
Point ① Point ②
Primary and secondary cavities are swapped completely.
Secondary resin is injected after moving the primary molded part into the secondary cavity.
6
2-color/dissimilar material molded productsMolded products
Injection units
Machine type
Hybrid Type 2-Color / Dissimilar Material Injection Molding MachineDCX-Ⅲ Series
Electric Type 2-Color / Dissimilar Material Injection Molding MachineDCE-Ⅲ Series
"DC Type" Core Rotation Special Machines
To meet diverse needs in 2-color/dissimilar material molding, a wide-variety of injection units and two types of driving sources (hybrid and electric) are offered in the lineup. For mixed color molding and molding with core-back type mold, special machines customized from the standard machines can be made.
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
It consists of two horizontally aligned or one horizontally and one vertically placed injection units and a clamping unit with rotary mechanism.
2-Piston direct pressure type clamping mechanism with hybrid X-Pump system 1. Superior direct-pressure type clamping unit 2. Low equipment and maintenance costs 3. Durable 4. Compact 5. High injection load performance
Double Flat Clamp: high-rigidity linear pressure toggle clamping mechanism 1. High cycle 2. High stop position precision 3. High filling ability and response 4. Special and simultaneous motions
It distributes clamping force ideally to both sides of the mold.
It distributes clamping force evenly to both sides of the mold.
It is very effective for the molded products with unbalanced projected areas.
Special machines based on standard machines
It consists of two horizontally placed injection units or injection units placed at an angle to form a V shape. It can mold products that use two different types of materials or two colors in a single mold simulteneously. It is used for core-back type molds, which contain hydraulic cylinders inside to control slide core's forward/backward movement.
A Wide-Variety of Selections
Machine Variations
7
High-Performance & High-Functioning Controller
TACTⅣNew controller that pursues better
operability and workability
Injection B
Injection A
Injection A
Injection B
Easy control of two injection units in one screen
Large screen, newly designed operation panel, and convenient & user-friendly premium software are
equipped to improve workability and operability. Quality and production management functions also have been improved, taking its user-friendliness to the next level.
Large 15-inch vertically long display can show main conditions, injection metering, and ejector A/B windows in one screen. The display offers superior usability for 2-color/dissimilar material molding machines, which normally require frequent screen switching.
Older controller screen
* The controller screen images used in this pages are from DCE-Ⅲ.
▲Bright and easy-to-see 15-inch LCD display
▲Easier operation with a high-response high-resolution touch & slide display
▲6-language display that comes standard
15 inch
12.1inch
こんにちは
สวัสดีี
안녕하세요
Hola
你好
Hello
*STD
8
Materialize molding you desire...The new controller that pursues better operability and workability
Traceability Support
Shutdown Sequence Programming Function
Descriptions of Adjusters
Screen Lock and Adjuster Masking Function
Descriptions of Errors
Flexible Purging Function
SET-UP Mode/SET-UP Screen Fully-Loaded Maintenance Function
Date specified event and monitor data display made possible.▶ Molding condition (max. 500 conditions)Saving waveform data and displaying image data are possible. Molding condition and an image of its product can be managed together as a set.▶ Event/monitor data (max. 100,000 events)It is helpful for maintenance and quality control (operation mode change, condition change, error, etc.)
A variety of finishing states after completing production is available. Operating power state and shutdown sequence for each driving unit can be freely selected.
It displays error messages and solutions.
This makes burdensome material and color change more efficient. It materializes flexible purging operations, such as purging at a specified cycle, purging with added back pressure, and force retreat purging.
Finish with ON
Finish with OFF
Complete with mold open
Complete with mold close
POWER INJECT
CLAMP
METERING
Complete without purging
Complete after purging
Complete after auto-purging
With metering
Without metering
Simple interface programs with auxiliary devices can freely be created on the screen. The program can be saved together with the molding data (ladder programming function). Various error input and signal output functions can be assigned to the four of input/output terminals (simple programming function).
It displays easy-to-understand definitions of the technical terms used for the adjusters.
Adjusters that need to be password protected can be arbitrarily selected.
▲Calendar
▲Selection of shutdown sequence after completing production
▲Ladder programming ▲Simple programming
▲Error message and its solution (touch [Error message] to show details)
▲Auto purging mode ▲Password & masking screen
▲Description of changeover
▲SET-UP screen ▲Newly added MAINT screen
Burdensome screen switching during setup has been eliminated. Settings related to mold setup, such as mold installation and purging, are consolidated into one page. When SET-UP mode is selected, it automatically switches the screen.
TACT IV can notify when recommended scheduled maintenance and consumable parts replacement time arrive, and its related notes can be entered.It can notify arbitrary messages, such as for mold, screw, lubrication, maintenance period, etc. on specified dates or shots. Remote control of TACT screen from a PC via LAN is also possible.
OPTION
9
DCX-Ⅲ Series, consisting of hybrid type 2-color/dissimilar material injection molding machines, is equipped
with NISSEI original hybrid "X-Pump" system and high performance/functioning "TACT IV" controller.
It materializes higher precision and quality for a wide variety of molded products from precision to large
products, optimizing the advantages of the super energy-efficient hybrid pump system.
The DCE-Ⅲ Series, consisting of all-electric type 2-color/dissimilar material injection molding machines, has
the mold-friendly high-rigidity "Double Flat Clamp" clamping mechanism and high performance/functioning
"TACT IV" controller. "Double Flat Clamp" mechanism was created by utilizing the NEX Series' "Flat Clamp"
(linear-pressure toggle mechanism) and idea of direct-pressure "2-Piston" type clamping mechanisms.
It demonstrate superb performance in high-grade molding and achieves significant energy-saving.
Electric Type 2-Color / Dissimilar Material Injection Molding Machine
Direct-pressure "2-piston" type clamping unit
Hybrid pump system "X-Pump"
High-performance & high-functioning controller "TACT IV"
High-performance & high-functioning controller "TACT IV" High-performance & wide-variety
NEX type injection unit
High-rigidity linear-pressure toggle clamping mechanism"Double Flat Clamp"
Series
X-Pump EquippedHybrid Type 2-Color / Dissimilar Material Injection Molding Machine
Series
10
models DCX120Ⅲ DCX200ⅢSpecification item
Injection type
UnitⒶ9A+Ⓑ9A Ⓐ25A+Ⓑ25A
Injection Screw diameter mm 26 28 32 36 36 40 45 50Injection capacity cm3 59 69 90 114 163 201 254 314Plasticization capacity (PS) kg/h 19 28 40 54 48 66 90 121Injection pressure MPa 265 244 187 147 255 219 173 140
Injection rateStandard cm3/s 80 92 121 153 102 126 159 196High velocity cm3/s 159 185 241 305 183 226 286 353
Injection velocity
Standard mm/s 150 100High velocity mm/s 300 180
Screw speeds rpm 0〜310 0〜265Nozzle touch force kN 30 34Hopper capacity (optional) L 12.5 25
Clamping Clamping force kN 1190 1990Clamping stroke mm 450 520Mold thickness (min.) mm 170 250Max. daylight opening mm 620 770Tie bar clearance (H×V) mm 660×250 925×305Die plate dimensions (H×V) mm 800×480 1070×570Min. mold dimensions (H×V) mm 235×235 270×270Ejector force kN 22×2 43×2Ejector stroke mm 100 100Max. mold weight (movable side) kg 200×2 370×2
Electrical & others
Heater band capacity kW 7.22×2 8.36×2 9.26×2 10.54×2 13.01×2Hydraulic oil quantity L 400 650
Machine dimensions (L×W×H) m 5.14×1.36×1.73 5.95×1.65×
1.95 5.98×1.65×1.95
Floor dimensions (L×W) m 5.00×1.17 5.81×1.46Machine weight t 7.05 -
models DCX400Ⅲ DCX600Ⅲ DCX800ⅢSpecification item
Injection type
UnitⒶ36A+Ⓑ36A Ⓐ50A+Ⓑ50A Ⓐ71A+Ⓑ71A
Injection Screw diameter mm 45 50 56 50 56 63 56 63 71Injection capacity cm3 286 353 443 402 505 639 554 701 891Plasticization capacity (PS) kg/h 82 110 150 101 137 184 125 167 235Injection pressure MPa 207 168 134 198 158 125 196 155 122
Injection rateStandard cm3/s 159 196 246 196 246 312 197 249 317High velocity cm3/s 238 294 369 275 345 436 271 343 435
Injection velocity
Standard mm/s 100 100 80High velocity mm/s 150 140 110
Screw speeds rpm 0〜240 0〜220 0〜200Nozzle touch force kN 34 47 55Hopper capacity (optional) L 45 90 90
Clamping Clamping force kN 3970 5880 7965Clamping stroke mm 750 850 1025Mold thickness (min.) mm 300 450 450Max. daylight opening mm 1050 1300 1475Tie bar clearance (H×V) mm 1120×420 1515×565 1870×710Die plate dimensions (H×V) mm 1360×810 1830×1030 2170×1200Min. mold dimensions (H×V) mm 325×325 415×415 520×520Ejector force kN 69×2 87×2 108×2Ejector stroke mm 120 180 200Max. mold weight (movable side) kg 950×2 1500×2 2800×2
Electrical & others
Heater band capacity kW 15.65×2 18.57×2 21.98×2Hydraulic oil quantity L 1100 1700 2700
Machine dimensions (L×W×H) m 7.19×1.97×2.22 8.15×2.49×2.40 9.21×2.99×2.66
Floor dimensions (L×W) m 6.95×1.81 7.86×2.31 8.56×2.81Machine weight t 23.38 - -
● Injection unit : Operation side = Ⓐ ; Non-operation side = Ⓑ● Actual plasticizing capacities may vary, depending on the molding conditions and materials.● Maximum injection pressures are the highest values that can be set on the machines. These values may be limited, depending on the molding conditions.● Maximum injection rates in the tables are the estimated values that were derived from a formula, and these are not guaranteed values at the maximum injection pressures.
● Machine dimensions, floor dimensions, and machine weights are approximate values. The listed machine weights do not include the weights of optional equipment and hydraulic oils.● Clamping forces may be lower than the values in the tables if molds smaller than indicated minimum mold sizes are used.● Specifications are subject to change without notice due to continuous performance improvement.● 1MPa = 10.2kgf/ ㎠ ≒ 10kgf/ ㎠、 1kN = 0.102tf ≒ 0.1tf
Performance Specifications
11
Operation safety1 Alarm lamp / alarm buzzer2 Emergency stop button (operator & non-operator side)3 Mold clamping safety device4 Safety door upper cover
★ 5 Transparent safety door cover (non-operator side)★ 6 Safety door lock
Power1 AC outlet
Maintenance, installation, and others1 Lubrication to clamping slide (DCX120Ⅲ〜200Ⅲ)2 Manual centralized greasing unit (DCX400Ⅲ〜800Ⅲ)3 Manual centralized lubrication unit (DCX400Ⅲ〜800Ⅲ)
★ 4 Periodic inspection support function (display of scheduled inspection date)★ 5 Parts replacement support function (display of recommended parts replacement period)
Clamping unit/mold
① Insulation plate (mold A/B)2 Additional mold mounting bolt hole ※3 Mold close pause
④ Ejector plate return confirmation (metal interface box on mold A/B)5 Mold temperature indicator (display on the screen) or mold temperature control6 Mold temperature upper & lower limit alarm7 Mold heater disconnection alarm 8 Daylight extension ※9 Locating ring attachment (non-fixed type) or locating ring assembly (fixed type)10 Locating ring diameter change ※11 Mold clamps (SAT Clamp and Easy Clamp)12 Quick mold change system (hydraulic/pneumatic/magnetic) ※13 Mold dowel pin and block
Injection unit1 Nozzle & barrel heater disconnection alarm2 2-point nozzle temperature control3 Barrel insulation cover4 Abrasion & corrosion proof barrel and screw5 High-temperature resistant barrel ※6 Special-purpose nozzle, screw, screw tip, barrel, and barrel HD ※7 Hopper / hopper extension with band / hopper slider 8 Hopper magnet
⑨ Hopper throat temperature control (DCX400Ⅲ〜)
⑩ Screen display of hopper throat temperature (〜DCX200Ⅲ)
Molding system control/production management1 Unscrewing ※② Air blow circuit3 Hydraulic core pull circuits x2 (hydraulic/air) ※4 Fixed chute or swing chute5 AC outlet with automatic activation by calendar timer6 USB flash drive
7SPC: Statistical Process Control function (molding machine process management by statistical method)
8 Water cut alarm / air cut alarm
Cooling/hydraulic oil1 Cooling water filter2 Additional cooling water circuit ※3 Cooling water circuit (with a return stop valve)4 Cooling water circuit (with a flow checker)5 Water temperature gauge6 Hydraulic oil purifier (DCX120Ⅲ~400Ⅲ)7 Anti-dew cooling hose
Operation safety1 Alarm bell2 Rotating beacon (Patlite) or layered indicator lamp (signal tower)3 Password protection function (screen lock and adjuster masking)4 Alarm lamp with a stand5 Non-operator side safety door lock (mechanical type) ※6 Automatic safety door open/close(DCX400Ⅲ〜800Ⅲ) ※7 Primary power indicator lamp
Power
① Main power breaker or main power leakage breaker
② Additional AC outlet3 Fire alarm4 Outlet circuit power shutdown
Maintenance, installation, and others1 Manual centralized lubricating unit(DCX120Ⅲ and 200Ⅲ)② Mounting pad3 Automatic centralized greasing unit
4Automatic centralized lubricating unit for clamping slide (〜DCX200Ⅲ) and for stationary platen slide (DCX400Ⅲ〜)
5 Custom color paint6 Tools
[Standard Equipment]
[Optional Equipment]
Clamping unit/mold1 Mold protection (low-pressure clamping time monitor)2 Mold protection error reconfirmation circuit3 Mold clamping halfway slowdown (three-plate & angular pin mold possible)4 Clamping force independent adjustment5 Clamping pressure full closed control6 High-pressure clamping force display7 Mold opening velocity: 4-speed8 Mold opening pause
★ 9 Mold position reading function10 Mold open/close prediction control
11Multi-functional ejector (continuous operation, start timer, pause, halfway change of velocity, 2-speed forward velocity, and variable forward/backward stroke)
12 Ejector plate return confirmation (standard 2 circuits: mold A/B up to terminal)13 Process inside mold: MIP0 (2 circuits: mold A/B & sequential operation)14 High-speed ejector motion in rotary table15 Mold rotation mechanism (driven by servomotor)16 Simultaneous mold open & rotation (for "rotation → ejection")17 Ejector selection (mold A/B) / ejector start timing selection (before or after rotation)18 Ejector sequence (before or after rotation)
Injection unit1 Injection process control: 6-speed, 3-pressure, and 3-limit pressure2 V-P changeover: 4 modes (position, injection velocity, injection pressure, and external input signals)3 Over packing prevention circuit4 Injection control changeover (control mode: standard/high-speed)5 Injection full-closed control6 Holding pressure response changeover: 3 modes (fast/middle/slow)7 Decompression / decompression before metering8 3-step backpressure and 3-step metering speed9 Metering rotation speed full-closed control10 Back pressure full-closed control11 Injection start timer / nozzle backward start timer / metering start timer12 High-precision metering control “Pre Comp” (resin density stabilizer) 13 Automatic purge circuit (with flexible purge function)14 Purging cover (with interlock)15 Screw cold start prevention (all-zone sequential type)16 Nozzle and barrel temperature upper limit alarm / nozzle and barrel temperature PID control17 Simultaneous heating of nozzle and barrel18 Nozzle heater circuit SSR19 Barrel heater circuit SSR (2A~3A)20 Barrel temperature holding control (forced TEMP holding and TEMP holding when an error occurs)21 Barrel heat radiation prevention cover
★ 22 Nozzle and barrel heater simple disconnection alarm23 Hopper throat temperature control (〜DCX200Ⅲ)24 Screen display of hopper throat temperature (DCX400Ⅲ〜)25 Screw forward safety circuit26 Material retention timer
Molding system control/production management
★ 1 TACT IV (15-inch LCD, dual window display, and sheet switch type operation panel)2 Shot counter / free shot counter
3Production management counter / production lot management counter (signal output optional) / cause-classified defect counter
4Monitor data display / statistic processing function / scatter diagram display / waveform analysis
5 Product pass/fail monitor / batch entry of acceptance level conditions6 Product take-out robot interface (SPI robot signal to terminal)7 Calendar timer (hydraulic oil and barrel heating)8 Molding condition and image data set management (jpeg or bmp)
★ 9 Molding condition internal storage (up to 500 conditions) / operation history display (100,000 items)10 Built-in LAN connector (10/100BASE-TX) / connection to PC11 USB port (x1) / data saving in an external storage (USB memory) / data output via USB12 Display of injection velocity and pressure waveforms13 Molding support message14 Multilingual display capability (English, Japanese, Chinese, Spanish, Korean, and Thai)
15Hour meter (molding machine total operation time display) / clock function (stopwatch and kitchen timer) / calculator
16 Ladder programming function (4 I/O signals programmable)
17Signal I/O allocation (error processing input and various output signals can be assigned to four of the I/O terminals)
18 Signal recorder (analysis of motor signal or I/O signal waveforms and data collection function)19 Alarm (informing) function (effective for mold & screw maintenances)
20Display or errors (directions for alarm reset function) / emergency power shut off (with delay timer) / cycle alarm
★ 21Selection of production complete state (selection of mold, injection, metering, and operation power states when production is completed)
22 Remote maintenance function (remote control of TACT screen from PC possible)
23Setting unit change (injection pressure, injection velocity, injection position, metering speed, temperature, and clamping force)
★ 24 Descriptions of adjusters (when some of the adjusters are touched, descriptions will be displayed)★ 25 Setup mode (mold open/close & ejection by setup speed and injection & metering by purging speed)★ 26 Idling stop function (it stops the servomotor after 5 minutes of inactivity)
Cooling/hydraulic oil1 Cooling water manifold: hopper throat x2, mold cooling x4, and oil cooler x12 Display of hydraulic oil temperature3 Hydraulic oil temperature riser4 Hydraulic oil upper/lower limit alarm / low oil level alarm5 Oil temperature stabilizer6 Hydraulic oil purifier (DCX600Ⅲ & 800Ⅲ)
★:Added or changed for DCX-Ⅲ ※:Longer lead time ○:Pupular optionsMain Equipment List
12
13
14
DCX800Ⅲ-71A(Equipped with options)
DCX400Ⅲ-36A(Equipped with options: European CE marking compliant specification)
15
models DCE140ⅢSpecification item
Injection type
Unit Ⓐ 5E+Ⓑ 5E (Special order) Ⓐ9E+Ⓑ9E Ⓐ12E+Ⓑ12E
Injection Screw diameter mm 22 26 28 26 28 32 28 32 36Injection capacity cm3 35 49 57 59 69 90 77 101 127Plasticization capacity (PS) kg/h 16 23 32 19 28 40 28 40 54Injection pressure MPa 280 196 169 280 243 186 280 223 177
Injection rate
Standard cm3/s 190 265 308 159 185 241 166 217 275High velocity cm3/s 190 265 308 265 308 402 246 322 407High load cm3/s 133 186 216 159 185 241 148 193 244
Injection velocity
Standard mm/s 500 300 270High velocity mm/s 500 500 400High load mm/s 350 300 240
Screw speeds rpm 0~350 0~300 0~300Nozzle touch force kN 13 13 13Hopper capacity (optional) L 12.5 12.5 12.5
Clamping Clamping force kN 1370Clamping stroke mm 400Mold thickness (min.) mm 170~450Max. daylight opening mm 850Tie bar clearance (H×V) mm 660×360Die plate dimensions (H×V) mm 860×550Min. mold dimensions (H×V) mm 235×235Ejector force kN 24×2Ejector stroke mm 100Max. mold weight (movable side) kg 250×2
Electrical & others
Heater band capacity kW 5.11×2 5.73×2 6.16×2 7.22×2 8.36×2 9.26×2 7.98×2 9.13×2Air consumption (when 0.5MPa) NL/shot 3.5 3.5 3.5
Machine dimensions
Lm
5.06 5.03 5.07 5.07 5.10 W 1.58 1.58 1.58 1.58 1.58 H 1.89 1.89 1.89 1.89 1.89
Floor dimensions (L×W) m 4.27×1.19 4.27×1.19 4.27×1.19Machine weight t 8.4 8.4 8.4
models DCE250ⅢSpecification item
Injection type
Unit Ⓐ9E + Ⓑ9E (Special order) Ⓐ12E + Ⓑ12E (Special order) Ⓐ18E+Ⓑ18E Ⓐ25E+Ⓑ25E
Injection Screw diameter mm 26 28 32 28 32 36 32 36 40 36 40 45Injection capacity cm3 59 69 90 77 101 127 117 148 182 163 201 254Plasticization capacity (PS) kg/h 19 28 40 28 40 54 40 54 75 54 75 102Injection pressure MPa 280 243 186 280 223 177 276 218 177 261 211 167
Injection rate
Standard cm3/s 159 185 241 166 217 275 161 204 251 183 226 286High velocity cm3/s 265 308 402 246 322 407 241 305 377 275 339 429High load cm3/s 159 185 241 148 193 244 161 204 251 183 226 286
Injection velocity
Standard mm/s 300 270 200 180High velocity mm/s 500 400 300 270High load mm/s 300 240 200 180
Screw speeds rpm 0~300 0~300 0~300 0~300Nozzle touch force kN 13 13 23 23Hopper capacity (optional) L 12.5 12.5 25 25
Clamping Clamping force kN 2450Clamping stroke mm 560Mold thickness (min.) mm 250~560Max. daylight opening mm 1120Tie bar clearance (H×V) mm 960×520Die plate dimensions (H×V) mm 1230×780Min. mold dimensions (H×V) mm 325×325Ejector force kN 39×2Ejector stroke mm 100Max. mold weight (movable side) kg 500×2
Electrical & others
Heater band capacity kW 7.54×2 8.36×2 9.26×2 8.09×2 9.13×2 9.00×2 10.57×2 10.54×2 13.01×2Air consumption (when 0.5MPa) NL/shot 4.0 4.0 4.0 4.0
Machine dimensions
Lm
5.83 5.83 6.05 6.12 6.10 6.19 W 1.87 1.87 1.87 1.87 1.87 1.87 H 2.20 2.20 2.20 2.20 2.20 2.20
Floor dimensions (L×W) m 5.40×1.44 5.40×1.44 5.40×1.44 5.40×1.44Machine weight t 17.1 17.1 17.1 17.3
Performance Specifications
● Injection unit : Operation side = Ⓐ ; Non-operation side = Ⓑ● Actual plasticizing capacities may vary, depending on the molding conditions and materials.● Maximum injection pressures are the highest values that can be set on the machines. These values may be limited, depending on the molding conditions.● Maximum injection rates in the tables are the estimated values that were derived from a formula, and these are not guaranteed values at the maximum injection pressures.
● Machine dimensions, floor dimensions, and machine weights are approximate values. The listed machine weights do not include the weights of optional equipment.● Clamping forces may be lower than the values in the tables if molds smaller than indicated minimum mold sizes are used.● Specifications are subject to change without notice due to continuous performance improvement.● 1MPa = 10.2kgf/ ㎠ ≒ 10kgf/ ㎠、 1kN = 0.102tf ≒ 0.1tf
16
models DCE140ⅢSpecification item
Injection type
Unit Ⓐ 5E+Ⓑ 5E (Special order) Ⓐ9E+Ⓑ9E Ⓐ12E+Ⓑ12E
Injection Screw diameter mm 22 26 28 26 28 32 28 32 36Injection capacity cm3 35 49 57 59 69 90 77 101 127Plasticization capacity (PS) kg/h 16 23 32 19 28 40 28 40 54Injection pressure MPa 280 196 169 280 243 186 280 223 177
Injection rate
Standard cm3/s 190 265 308 159 185 241 166 217 275High velocity cm3/s 190 265 308 265 308 402 246 322 407High load cm3/s 133 186 216 159 185 241 148 193 244
Injection velocity
Standard mm/s 500 300 270High velocity mm/s 500 500 400High load mm/s 350 300 240
Screw speeds rpm 0~350 0~300 0~300Nozzle touch force kN 13 13 13Hopper capacity (optional) L 12.5 12.5 12.5
Clamping Clamping force kN 1370Clamping stroke mm 400Mold thickness (min.) mm 170~450Max. daylight opening mm 850Tie bar clearance (H×V) mm 660×360Die plate dimensions (H×V) mm 860×550Min. mold dimensions (H×V) mm 235×235Ejector force kN 24×2Ejector stroke mm 100Max. mold weight (movable side) kg 250×2
Electrical & others
Heater band capacity kW 5.11×2 5.73×2 6.16×2 7.22×2 8.36×2 9.26×2 7.98×2 9.13×2Air consumption (when 0.5MPa) NL/shot 3.5 3.5 3.5
Machine dimensions
Lm
5.06 5.03 5.07 5.07 5.10 W 1.58 1.58 1.58 1.58 1.58 H 1.89 1.89 1.89 1.89 1.89
Floor dimensions (L×W) m 4.27×1.19 4.27×1.19 4.27×1.19Machine weight t 8.4 8.4 8.4
Clamping unit/mold
1Mold protection (low-pressure clamping time monitor) and high-sensitivity mold protection (torque monitor)
2 Mold protection error reconfirmation circuit (motion selection when an error occurs)3 Mold clamping halfway slowdown (three-plate & angular pin mold possible)4 Mold opening velocity: 4-speed / mold opening pause
★ 5 Mold position reading function (set-up support function)★ 6 Mold thickness device preparatory movement function (set-up support function)
7 Automatic mold thickness adjustment
8Multi-functional ejector (continuous operation, start timer, initial 2-speed forward velocity, pause, and variable forward/backward stroke)
9 Ejector plate return confirmation (2 circuits: mold A/B up to terminal)10 Selection of ejector sequence (mold A/B and before/after rotation)11 Simultaneous mold open & rotation (for "rotation → ejection")12 Simultaneous mold open & ejection (for "ejection → rotation")13 Process inside mold: MIP0 (2 circuits: mold A/B & simultaneous operation)
Injection unit
1Injection process control: 6-speed, 3-pressure, and 3-limit pressure / 3-step backpressure and 3-step metering speed
2 V-P changeover: 4 modes (position, injection velocity, injection pressure, and external input signals)3 V-P changeover response: 3 modes (optional/slow/high response)
4Holding pressure control: 4 modes (pressure/positioning/pressure → positioning/positioning → pressure)
5 Injection during mold clamping (IDMC) / nozzle forward during mold clamping6 Injection volume compensation control7 Injection start timer / metering start timer / nozzle backward start timer8 Over packing prevention circuit9 Decompression / decompression before metering10 Simultaneous metering operation (shutoff nozzle is optional)11 High-precision metering control (pre-pack/precision metering)12 Automatic purge circuit (with flexible purge function)13 Purging cover (with interlock)14 Screw cold start prevention (all-zone sequential type)15 Nozzle and barrel temperature upper limit alarm / nozzle and barrel temperature PID control16 Simultaneous heating of nozzle and barrel17 Nozzle heater circuit SSR / barrel heater circuit SSR (5E~25E)18 Barrel temperature holding control (forced TEMP holding and TEMP holding when an error occurs)19 Barrel heat radiation/burn prevention cover
★ 20 Nozzle/barrel heater simple disconnection alarm (detection by thermometers)21 Material retention timer22 Screen display of hopper throat temperature23 Hopper throat temperature PID control
Molding system control/production management★ 1 TACT IV (15-inch LCD, dual window display, and sheet switch type operation panel)
2 Shot counter / free shot counter
3Production management counter / production lot management counter (signal output optional) / cause-classified defect counter
4 Monitor data display / statistic processing function / scatter diagram display5 Monitor data pass/fail judgment function (batch condition entry)6 Product take-out robot interface (SPI robot signal to terminal)7 Barrel heat-up (calendar timer)8 Molding condition and image data set management (jpeg or bmp)
★ 9 Molding condition internal storage (up to 500 conditions) / operation history display (100,000 items)10 Built-in LAN connector (10/100BASE-TX) / connection to PC11 USB port (x1) / data saving in an external storage (USB memory) / data output via USB12 Display of injection velocity and pressure waveforms13 Molding support message14 Multilingual display capability (English, Japanese, Chinese, Spanish, Korean, and Thai)
15Hour meter (molding machine total operation time display) / clock function (stopwatch and kitchen timer) / calculator
16 Servomotor load monitor
17Ladder programming function (4 I/O signals programmable) (cannot be used with signal I/O allocation function)
18Signal I/O allocation (error processing input and various output signals can be assigned to four of the I/O terminals) (cannot be used with ladder programming function)
19 Signal recorder (analysis of motor signal or I/O signal waveforms and data collection function)20 Alarm function (maintenance alert function that displays arbitrary message at specific time or shot)21 Display or errors (directions for alarm reset function)
22Emergency power shut off (shut off the heater and motor power when a critical error occurs) / emergency power shut off delay timer
★ 23Selection of production complete state (selection of mold, injection, metering, and operation power states when production is completed)
24 Cycle alarm25 Remote maintenance function (remote control of TACT screen from PC possible)
26Setting unit change (injection pressure, injection velocity, injection position, metering speed, temperature, and clamping force)
★ 27 Descriptions of adjusters (when some of the adjusters are touched, descriptions will be displayed)★ 28 Setup mode (mold open/close & ejection by setup speed and injection & metering by purging speed)
29Setup simultaneous motion (simultaneous motion of injection forward/backward, metering, and auto purge during automatic mold thickness adjustment is possible)
Cooling1 Cooling water manifold
Operation safety1 Alarm lamp / alarm buzzer2 Emergency stop button (operator & non-operator side)3 Mold clamping safety device (mechanical/electrical)4 Safety door upper cover (DCE140Ⅲ: with interlock)5 Safety door lock (spring catch type)6 Non-operator side safety door with clear acrylic cover
[Standard Equipment]Power
1 AC outlet
Maintenance, installation, and others1 Automatic centralized greasing unit (for toggle slide, tie bar bush, and injection slide)2 Manual centralized lubricating unit (for clamping slide)
★ 3 Periodic inspection support function (display of scheduled inspection date)
★ 4 Parts replacement support function (display of recommended parts replacement period)
Clamping unit/mold
① Insulation plate (mold A/B)
② Additional mold mounting bolt hole ※3 Mold close pause④ Ejector plate return confirmation (2 circuits: mold A/B and metal interface box)5 CPN3 (displays details of motions and compression load) ※6 Mold temperature indicator (display on the screen) or mold temperature control7 Mold temperature upper & lower limit alarm8 Mold heater disconnection alarm ⑨ Daylight extension ※10 Locating ring attachment (non-fixed type) or locating ring assembly (fixed type)11 Locating ring diameter change ※12 Mold clamps (SAT Clamp and Easy Clamp)
⑬ Quick mold change system: hydraulic (stationary side only. Hydraulic source for clamp needed), magnetic, or pneumatic (consultation required for ejector stroke extension) ※
14 Mold dowel pin and block
Injection unit1 Nozzle & barrel heater disconnection alarm2 2-point nozzle temperature control3 Barrel insulation cover4 Abrasion & corrosion proof barrel and screw (details need to be specified) ※5 Shut off nozzle ※6 Extended nozzle ※7 High-velocity injection unit (9E: 500mm/s, 12E: 400mm/s, 18E: 300mm/s, 25E: 270mm/s)8 High-load injection unit (5E: 350mm/s, 9E: 300mm/s, 12E: 240mm/s, 18E: 200mm/s, 25E: 180mm/s)9 Hopper / hopper slider / hopper extension with band
⑩ High-temperature resistant barrel (details need to be specified) ※11 Special-purpose nozzle and barrel (details need to be specified) ※12 Temperature holding nozzle13 Connector or other special-purpose nozzle (details need to be specified)14 Hopper magnet15 Low-pressure molding system “K-SAPLI™”
Molding system control/production management1 Unscrewing2 Air blow circuit
3Hydraulic core pull circuit (hydraulic unit needed. Piping block cannot be installed on the rotary table) ※
4 Pneumatic core pull circuit5 Fixed chute or swing chute (interlocked with product pass/fail judgment function)6 AC outlet with automatic activation by calendar timer7 USB flash drive
8SPC: Statistical Process Control function (molding machine process management by statistical method)
9 Water cut alarm / air cut alarm
Cooling
① Cooling water filter2 Additional cooling water circuit
③ Cooling water circuit (with a return stop valve)4 Cooling water circuit (with a flow checker)5 Water temperature gauge6 Anti-dew cooling hose
⑦ Movable side high-temperature spec mold temperature controller circuit (temperature controller hosing for high-temperature medium) (consultation required) ※
Operation safety
1 Alarm bell2 Rotating beacon (Patlite) or layered indicator lamp (signal tower)3 Password protection function (screen lock and adjuster masking)4 Alarm lamp with a stand5 Non-operator side safety door lock (mechanical type) ※6 Primary power indicator lamp
Power
① Main power breaker or main power leakage breaker
② Additional AC outlet3 Fire alarm4 Outlet circuit power shutdown5 Additional outlet for different voltage
Maintenance, installation, and others1 Manual greasing set2 Tools
③ Mounting pad4 Custom color paint
[Optional Equipment]
★:Added or changed for DCE-Ⅲ ※:Longer lead time ○:Pupular optionsMain Equipment List
17
18
A
B
A
B
A
B
A
B
2-color/dissimilar material products can be molded by adding the portable injection unit to a general-purpose injection molding machine. In addition, it can be added on to a 2-color/dissimilar material injection molding machine to produce multi-color/multi-material products.
Please contact us for more details about the portable injection unit.
▲Mixed color cosmetic containers
▲Thin triple-layer + IML system cups
▲Triple color coaster (DCE140Ⅲ + portable injection unit)
Patterns can be created by using two horizontally placed
or V-shaped injection units that share one nozzle and head.
Different-colored materials are injected to a mold from the
injection units simultaneously or continuously. It can form
a variety of patterns depending on the injection timing,
nozzle structures, and molding conditions.
Thin-Wall Multi-Layer Container Injection Molding Machine
NEX220 Ⅲ -50ETN(Customized and equipped with options)* Japanese specification (as of 2016)
Specifications Unit IU5A
Screw diameter ㎜ 22 26
Injection capacity ㎤ 35 49
Plasticization capacity Kg/h 15 22
Injection rate ㎤/s 50 71
Injection velocity mm/s 133 133
These are two-material triple-layer thin-wall containers. The middle layer possesses gas barrier property, preventing oxidation of the content and permitting long-term preservation.
Beautiful two mixed-colored products (marbled, sandwich, tortoise-shell pattern, striped, flower pattern, etc.) can be created with an exiting mold by utilizing NISSEI's mixed color injection molding machine's injection units, nozzles, and special molding conditions.
Examples on this pages are actual custom machines. Specifications may vary depending on the countries or regions
and may not be available in some areas. Please contact us for more details.!
Special Double Injection Machines that Meet a Variety of Molding Needs
Portable Injection Unit
Mixed Color Injection Molding Machine Thin-Wall Multi-Layer Container Injection Molding Machine
Portable Injection Unit
IU Series
Tertiary molding
Printed in Japan 30 Jun. 2017-01-No.1P-320
HEAD OFFICE & FACTORY:2110 Minamijo, Sakaki-machi, Hanishina-gun, Nagano-ken 389-0693, Japan[Export Department]TEL: +81-268-81-1070 FAX: +81-268-81-1099E-mail: [email protected][URL] http://www.nisseiplastic.com/en/
U.S.A : Los Angeles(California), Chicago(Illinois), Jamesburg(New Jersey), Atlanta(Georgia), Erie(Pennsylvania), Auburn(Massachusetts), Tampa(Florida)Mexico : Mexico City, Monterey, Guadalajara, QueretaroBelgium : BrusselsSingapore : SingaporeMalaysia : Kuala Lumpur, PenangPhilippines : LagunaIndonesia : JakartaThailand : BangkokChina : Hong Kong, Dongguan, Shanghai, Dalian, WuhanTaiwan : TaipeiKorea : SeoulVietnam : Ho Chi Minh City, HanoiIndia : Gurgaon
•Due to continuous performance improvement, speci�cations and designs are subject to change without notice.
NISSEI Overseas Network