T2726

Electrical Network Analyser (Fault Loop Impedance)

LOOP

IMPE

DAN

CE

ELECTRICAL TEST EQUIPMENT PURCHASE GUIDE

APPRENTICE KITS

APKIT

APKIT1

APKIT2

APKIT3

APKIT4

APKIT7

APKIT5

APKIT6

C277HP H1876/B T288

High Voltage Proximity Detector50V to 1.5kV AC / 1.5kV to 132kV AC

RITZ Voltage Phase Tester 16Kv &STK/Case Personal Voltage Detector

T275HP T275NHP T213HVD T217HVD PD20High Voltage Proximity Detector

240V/11/22/33/66/110/132/210/275kVHigh Voltage Proximity Detector

240/3.3/6.6/11/22/33/66/110/220kV11kV Medium Voltage Touch Tester 11- 33kV Medium Voltage Touch Tester PD20 High Voltage Probe (low energy)

used with DMMNote: Part No. T475HP – Hotsticks & Telescopic Sticks are available with the purchase of Part nos. T275HP, T275NHP, T213HVD & T217HVD

HIGH

VOL

TAGE

TES

T EQ

UIPM

ENT

DATA

TES

TERS 35RJTST8 256553 256653T 256655 256555 256003 256800

Professional Network Cable Tester –

RJ11/12/45, BNC

NETfinderTM_ Tester, Tone Generator & Port Finder

Cable Tester

SMARTestTM Compact Cable Network Tester

LAN ID Pro – Network Diagnostic Tool (Port & Signal)

NETfinderTM Pro (Cable Organiser/ Finder)

LANsmartTM TDR Wire Mapping Tester

GIGA-X Gigabit Network on Line

LAN Status Checker

LAN

TES

TERS

T2705 T2720 C2302 C4235 C2301 TEL1TLV2 TEL11 T2712EL

Analogue 3 Wire Earth Tester

Digital 3 Wire Earth Tester

Digital Earth Resistance Tester

Earth Resistance Tester 4 Wire & Resistivity Earth Resistance Clamp Meter Power Point Tester V2

Single & Three Phase RCD Tester

(Industrial)

Digital RCD Tester 240V (Domestic & Commercial)

RCD

TEST

ERS

SOCK

ET T

ESTE

RS

EART

H RE

SIST

ANCE

MIS

C.

C6818 C5902

Cable Locator and Circuit Finder

Circuit Breaker Finder & Socket Polarity

CABL

E TR

ACER

S

FIBR

E OP

TIC

TEST

ERS

VDV

TEST

ER

FC-2005A 33-856 T180 C183 256713F 256712F WL-F601 258991A

Fibre Checker Pro (light source)

VDV Multimedia Cable Test Kit

Cable Tracer Tone Generator

Data Cable Tracer plus Tel Tester

Tone Cable TracerDigital Wireless

Hot-Spotter (WiFi)PC Cable

TesterProbe & Generator Kit

Probe only

CABL

E CH

ECKE

R

WIF

I DET

ECTO

R

CABL

E TR

ACER

S

VOV

TEST

ERS

ELEC

TRIC

IAN

'S M

ETER

SPY

ROM

ETER

S

T111 T6201 TB01 TP02 TP03 TP04 TP06 TCA

Infra-Red Thermometer

Mini Thermometer with Needle Point

Bead Type-K Thermocouple

Immersion Probe Type-K

Flat Surface Probe Type-K

Piercing Probe Type-K

Air Probe Type-K

Thermocouple to DMM Adaptor

Note: All Temperature Probes: TB01, TP02, TP03, TP04, TP06 require Part no. TCA to fit DMMs

T4137 MI3250

Milliohm Meter Low-Ohm Meter MicroOhm Meter 10A

CABAC has a policy of continuous product improvement and reserves the right to change materials and specifications without notice. Drawings, where used, are not to scale. All dimensions are in millimetres and sizes given are approximate. Where available, technical and MSDS data sheets are available on the CABAC website. All CABAC products should be installed and used in accordance with manufacturer’s instructions provided. Warning: products may be the subject of registered designs and patents. Refer to CABAC website for terms and conditions on warranty. The one day, one call, one delivery does not cover the following items: Cabchem, Cast Resin kits, Custom manufacturing & kitting, Cabinets, Pillars, CABTRAY & Branch stock orders.

Make and Model CABPAT

Class I Appliance √

Class II Appliance √

Extension Leads √

Power Boards √

250V Insulation -

500V Insulation √

> 10A Operation -

RCD Testing -

3 Phase Appliances OPT.

Battery Power √

Run/Leakage Test √

Internal Memory -

Mains Supply Test (outlet)

√PORT

ABLE

APP

LIAN

CE T

ESTE

R

FLIR

THE

RMAL

IMAG

ING

Part No. Description

TG165 Infrared camera thermometer 80 x 60

C2Compact Infrared camera 4800 Pixel With MSX

Ex & Exx SERIES CAMERASE4 Infrared camera 80 x 60 Focus Free 9HzE5 Infrared camera 120 x 90 Focus Free 9HzE6 Infrared camera 160 x 120 Focus Free 9HzE8 Infrared camera 320 x 240 Focus Free 60Hz

E40 Infrared camera 160 x 120 Pixels + visual camera 3.1MP & Wi Fi

E50Infrared camera 240 x 180 Pixels + visual camera 3.1MP & Wi Fi

E60Infrared camera 320 x 240 Pixels + visual camera 3.1MP & Wi Fi

1196960IR LENS f= 10mm, 45° wide angle lens, including case

1196961IR LENS f= 30mm, 15° narrow angle lens, including case

INFRARED WINDOWSIRW2 Infrared camera window 2"IRW3 Infrared camera window 3"IRW4 Infrared camera window 4"

T SERIES CAMERAST420* Infrared camera 320 x 240 Pixels x4 ZoomT440* Infrared camera 320 x 240 Pixels x8 Zoom

T460*Infrared camera 320 x 240 Pixels x8 Zoom, -20° - 1500°C

SOFTWARE

T198583 FLIR Tools Reporting Software

* Denotes special order items.

Part No. Description Contents

PR-CASE Basic DMM, Clamp, Insulation Tester & Voltfinger BM805,T2600, T2732, T7107A, WICKIT1

TESTKIT1 Tradie DMM, Clamp, Insulation Tester & Voltfinger C3121, BM821, TBM116, T2732, WICKIT1

TESTKIT2 Prof. DMM, Clamp, Insulation Tester & Voltfinger T7107A, BM822,TBM116, T2732 & WICKIT1

TESTKIT3 Logging Kit for BM525 with Clamp BM525, BU86X, T202 & WICKIT1

TESTKIT4 Professional Kit DMM, Clamp and Tracing Equipment TBM685, TBM116,T606,C5902, TEL1TLV2, WICKIT3

TESTKIT5 Large Kit DMM,Clamp, Phase Sequence, Loop Z, RCD, etc.

TBM685, BM086, T2732, TR-PCB, C5900, T2712EL, T2726, TEL1TLV2, WICKIT3

TESTKITA Electricians Basic Test and Tool Kit

T7107A, TEL1TLV2, BM251, BM111M, EP220, HVSDK5, HVSC200B, KUS4, KUS800, KLP250, KAP250, HVLNP205B, KAW200, KT10M & WICKIT2

METERKITCATIV DMM, Clamp, Voltage Tester CATIV BM822, T7107A, T855, BM086,BT73XEU & WICKIT3

TEST

KIT

S

C6500 PD230

Loop Calibrator 4 - 20mA, 0 - 25mA, 0 - 10V

230 to 400V proving device for high impedance DMMs

ADAP

TORS

C-DEL TEL-AUS10A TPI-20A* TPI-32A*Adaptor Splitter Appliance Tester for run tests, socket

and RCD trip testSplitter, Active 10A Plug Appliance Tester

Adaptor 3 phase 20AAppliance Tester

Adaptor 3 phase 32A

Note: *Denotes order as required products

CALI

BR

ATIO

NQ

UA

LITY

STA

TEM

ENT

CABAC OFFERS A CALIBRATION SERVICE FOR INSTRUMENTS The Calibration can either be Factory Standard calibration or independent external NATA accredited calibration. Please note part numbers for calibration of Multimeters, Clamp meters, Installation testers, Multi-function and Appliance testers. An installation tester is defined as an instrument that conducts RCD, LOOP or Insulation testing. Multifunction testers which encompass all these testers in the one unit will attract a higher calibration price due to the extra time taken to check all functions.

Part Number Description CALSTANMM Factory Calibration MultimeterCALSTANMF Factory Calibration Multifunction testersCALSTANCLAMP Factory Calibration ClampCALSTANAPP Factory Calibration Appliance testersCALSTANINS Factory Calibration Insulation testers

Part Number DescriptionCALNATAMM NATA Calibration MultimeterCALNATAIMF NATA Calibration Multifunction testersCALNATACLAMP NATA Calibration ClampCALNATAAPP NATA Calibration Appliance testersCALNATAINS NATA Calibration Insulation testers

CERTIFICATE OF QUALITY

CABAC TEST EQUIPMENTCABAC confirms herein that the unit you have purchased has been calibrated, during the manufacturing process, in compliance with the test procedures defined by CABAC and the manufacturer.

All CABAC procedures are monitored on a permanent basis in compliance with ISO 9000 Quality Management Standards.

In addition CABAC confirms that all test equipment and instruments used during the calibration process are subject to constant control. All test equipment and instruments used are calibrated at determined intervals, using reference equipment, which has been calibrated in compliance with (and traceable to) the calibration standards of international laboratories and the country of manufacturer’s national standards.

The factory settings are valid for a period of one year from the date of purchase from your reseller.

CABAC test and measurement equipment complies with Australian EMC regulatory and international requirements.

CABAC TEST EQUIPMENTIdeal for professional use in industrial, electrical applications, field environments, laboratory or workshop applications there’s a model to suit every need.

CABAC test equipment use the latest microprocessor technology to provide comprehensive measuring ranges and features in hand held instruments. There is a wide range of test and measurement equipment to suit most applications and budgets.

All products conform to International Standard requirements, and all carry a long list of exclusive features. Some models have “Lifetime of Product Warranty” as standard, and all are backed by the CABAC name for quality.

Whether you are buying a general purpose unit, that has advanced features such as auto ranging, data hold, auto power off, reinforced case for durability, etc. or a professional range unit which offers additional features and accessories, the CABAC range of test equipment will suit your work requirements and provide you with many years of reliable service.

Some models have “Lifetime of Product Warranty”

*Refer to CABAC website cabac.com.au for terms and conditions on warranty.

FLIR PROTECTIONRegister via www.flir.com/thg and enjoy the piece of mind that comes with our 2-10 year warranty promotion.

LEA

DS

Description

AL01 AL02 AL04 AL24 AL28-1 AL28-3 AL28-5 AL30RBGKIT AL30RWBKIT TEL-EL TEL-AN AL35L AL37B AL37R AL38C AL52F AL57F10A AL-4WER

1kV 10A Black Single

Lead

1kV 10A Black Single

Set + Croc-Clip

1kV 10A DMM Set

PVC, Set Threaded

Pins

1kV 10A DMM Set

1kV 10A 4mm Probe

1kV 10A Threaded set + Croc Clips

Set L, N & E with Croc-Clips

Set L1, L2 7 L3 with Croc-Clips

RCD test 10A Plug and

Lead

RCD test 10A Plug and Lead

No Neutral

Silicone Insulated Lead Set

Stacking Lead Black

Stacking Lead Red

Croc-Clips for 4mm Banana Probes

Fused Leads Set 2A CAT IV

Fused Lead set 10A CAT IV

Earth Resistance

Leads for 4-Wire

Testers

Lead Length (m) 3 0.9 0.84 1 0.5 1 0.5 N/A 1

Black- 3m Blue - 20m Green -

50m Red - 36m Spike 45cm

Probe Φ (mm) 2 2 Threaded 2 4 2 Threaded 4 10A Plug 10A Plug

Instrument Plug 90o 4mm shrouded Shrouded 4mm Straight 90o 4mm

shrouded

Straight 4mm shrouded piggy back

90o 4mm shrouded

Colours Black Red & Black Red, Green & Black

Red & Green Red & Black Black Red Red & Black

Black, Blue, Green,

Red + Spikes

Set of: 1 2 1 2 1 2 4

Accessories - Small Croc-Clips - Small

Croc-Clips Large Croc-Clips 10A Plug Optional - Croc-Clips Optional -

CAT III 1000V 600V 1000V 600V 690V 1000V -

CAT IV 1000V - 600V 300V 690V 600V 10A -

LEADS - VERSION 2

TEL-30

30m Test Lead Earth - Green

EART

HIN

G LE

AD

AL-53 AL-BM877IN

High Voltage Insulation Tester Probes

Spare lead to suit BM877 ONLYSP

ECIA

L TE

ST L

EADS

DMM Software & Interface Cable (USB)

Software Part No. Suitable for Part Nos.

BU-86X BM821, BM822, BM827, BM525, BM867, BM869

BRUA-20X BM251, BM257

Clamp Software – Software & Adaptor

TBR13XTBM135, TBM155, TBM157, TBM116, TBM118. NOTE: Requires USB2SER Adaptor

Useful Electrical FormulasDescription Formula Components

Ohms Law Vdc=RI or Vac=ZI R= resistance, Z=impedance, I=current, V= Voltage

Power P = W/t Power = Watts, W = work (Joules), t= time (seconds)Apparent Power (S) S = VI (VA) V = Volts, I = current (Amperes)Reactive Power (Q) Q = VAr (VAR) V = Volts, Ar = Reactive current (Amperes)

Active Power (P) P = VI cos φ (Watts) cos φ = power Factor = P/S =real power/apparent power

AC Current (Irms) Irms = 0.707.Ipeak √2 = 0.707, Ipeak = peak Current (for sine waves)

AC Voltage (Vrms) Vrms = 0.707.Vpeak √2 = 0.707, Vpeak = peak Voltage (for sine waves)

Phase to Phase Voltage VL-N = VL1-L2.√3 VL-N = voltage active to neutral, VL1-L2.= phase voltage, √3= 1.73

Electrical Energy (kWhrs) E= P.t Power = kiloWatts (kW), t= time (hrs)

ELEC

TRIC

AL F

ORM

ULAS

SOFT

WAR

E

LOW

RES

ISTA

NCE

T630 C6450 T325

Lux MeterElectronic Distance

Estimator (Electronic Tape Measure)

Sound Level Meter

DIST

ANCE

SOUN

D

LUX

Product datasheets and detailed information available from the CABAC website.

VOLT

AGE

SOUR

CE

CBTM

CHAR

T

FEAT

URE

INFO

SAFE

TY N

OTES

VOLT

AGE

DETE

CTOR

S &

TEST

ERS

Lifetime of Product Warranty

See website for details

L.O.P.

MU

LTIM

ETER

S

Summary of Safety Requirements (IEC6110-1 2nd Ed. 2001-02) Categories listed in clause 6.7.4

CATI Work area for equipment not connected to the installation

CATII work area for equipment connected to the installation

CATIII work area in the installation

CATIV work area: source of supply for installations

The CAT rating on an instrument states the maximum DC voltage & the active to neutral AC voltage. See adjacent table on the right for Nominal Voltages.

INSU

LATI

ON

TES

TER

S

FEATURES T1800 T2732 T2751 BM877 C8010 TIN6A C5215 TIN7D INSTALTESTKIT INSTALTESTKITB

Display Analogue Analogue Digital DMM Digital Analogue Digital Digital Digital Digital

50V Test Voltage √ √ √ √

100V Test Voltage √ √ √ √ √

250V Test Voltage √ √ √ √ √ √ √ √

500V Test Voltage √ √ √ √ √ √ √ √ √

1000V Test Voltage √ √ √ √ √ √ √ √ √

2500V Test Voltage √ √

5000V Test Voltage √ √ √

10000V Test Voltage √ √

High Resistance Range (Ω) 0-400 MΩ 500 k -400 MΩ 20, 200 & 2000 MΩ 0.02 to 25 GΩ 0 to 200 GΩ 1000V <400GΩ & < 400 G 0.01 M - 5 T 800kΩ - 500GΩ < 19 MΩ, 20- 99MΩ & 100-199MΩ

< 19 MW, 20- 99MΩ & 100-199MΩ

Insulation Test Current 2 mA 1.3 mA 1 mA 1mA 1mA 1.5 mA Variable 1 mA 1 mA

Continuity Test Current 240 mA 205 mA 210mA 110mA-20Ω 210mA-2Ω >210mA - - - 200mA 200mA

Low Resistance 0-50 & Infinity 0-3 & 500 0-20/ 0-200/ 0-2000 0.015 to 21.99Ω 0 to 20MΩ - - - 0 - 1999Ω 0 - 1999Ω

Timer (Continuous Test) √ √ √ √ √ √

Live Circuit Warning √ √ √ √ √ √

Automated Operation √ √ √ √ √ √

Auto Discharge √ √ √ √ √ √ √ √ √ √

Resistance Buzzer √ √ √

Voltage Measurement 0-600 VAC Default 0-600 VAC Default 0-600 VAC 1000V AC/DC, VFD-V 600V 600V AC/DC - 750VAC 1000VDC - 550V AC 550V AC

Battery Check √ √ √ √

APO √ √ √ √ √ √ √

Memory/Data Storage - √ √ √

PC Comms - - - - - √ - USB

Special Functions 0-3W range, Default Voltage Test

Dual Reading Display, VFD-F, VFD-Hz, PI, DAR, True RMS.

1000V Insulation test up to 200GΩ 1 W Output DAR & PI, Data Memory,

PC Transfer, Temperature1W output, DAR, PI, Timer,

EnersaveTM

Loop Impedance, PSC, RCD, Socket, Backlight, Polarity, Phase Rotation

Loop Impedance, PSC, RCD, Socket, Backlight, Polarity, Phase

Rotation, Software & PC link.

IEC61010 Rating (CAT III) 600V 600V 600V 1000V 600V 600V 1000V 300V 600V 600V

IEC61010 Rating (CAT IV) 300V 300V 300V 600V 300V 300V 300V 150V 300V 300V

Warranty (Years) 1 2 2 L.O.P. 1 1 1 1 1 1

Note AS/NZS61010 Rating is required for voltage measurement, not insulation testing.

Insulation testers

INST

ALLA

TION

TES

TERS

INSU

LATI

ON T

ESTE

RS

FEATURES C505 T8211D TBM22 TBM27 C187 T8268 T8229 TBM682 TBM685 BM251 BM257 TBM805 TBM807 BM821 BM822 BM827 BM877 BM525 BM867 BM869

Display Analog Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital

LCD Counts 1999 4000 6000 4000 3999 3999 6000 6000 6000 6000 4000 4000 10000 10000 10000 6000 10000 50000 50000

LCD Digits 31⁄2 33⁄4 35⁄6 31⁄2 33⁄4 33⁄4 35⁄6 35⁄6 55⁄6 55⁄6 33⁄4 33⁄4 35⁄6 35⁄6 35⁄6 35⁄6 35⁄6 44⁄5 44⁄5

Bargaph √ √ √ √ √ √ √ √ √ √

Battery Test √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Max AC Voltage 1000 600 600 600 70 750 750 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

Max DC Voltage 1000 600 600 600 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

Max AC Current (A) 10 2 mA 10 10 10 10 10 10 10 10 10 10 10 10 10

Max DC Current (A) 10 2 mA 10 10 10 10 10 10 10 10 10 10 10 10 10

Fused Range 10 10 √ √ √ √ √ √ √ √ √ √ √

Max Resistance 20M 20M 40M 6M 40M 200M 40M 6M 6M 60M 60M 40M 40M 60M 60M 60M 60M (25G) 60M 50M 50M

Continuity Beeper √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Diode Test √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Autoranging √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Frequency (Hz) 100k 100k 1-50k 1M 1k 1k 1k 10- 100k 1k 200k 200k

Capacitance µF 2000 2000 200 200 2000 3000 3000 25m 25m 25m 30m 25m 25m 25m

Temperature °C -50 to 1000 -50 to 998 -50 to 999 -50 to 1000

Min/Max Hold max √ √ max max √ √ √ √ √

Data Hold √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Crest or Peak Hold √ √ √ √

True RMS Measurement √ √ √ √ √ √ √ √

Back Light √ √ √ √ √ √ √ √ √ √ √

Splash & Dust Proof √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Transient Proof 6kV 6kV 4kV 4kV 6kV 6kV 12kV 12kV 6kV 6.5kV 6kV 6kV 12kV 12kV 12kV 8kV 12kV 12kV 12kV

Relative Reference √ √ √ √ √ √ √ √ √ √ √

Holster √ √ √ √ √ √ √ √ √ √ √ √ √

Auto Power Off √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Fire Retardant Case √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

PC Comms. USB USB USB USB USB USB USB USB

Data logger √

Other FeaturesTaut Band

Movement. Mirror

Compact Pen Type

LAN Cable Tester.

RJ45, RJ11

Incorrect Socket Alert

Dual Display, RH%, Lux, dB,

Incorrect Socket Alert

EF EF EF Logic Level Hz, EF

Dual Display, BeepJack

Dual Display, BeepJack

Dual Display, BeepJack, EF,

Logic Level Hz, EF

Dual Display, BeepJack, Insulation

Test, PI & DAR, Continuity Test

Dual Display, BeepJack, Logging

Memory, Dual T1-T2

Dual Display, %4-20mA, dBm,

BeepJack

Dual Display, %4-20mA, dBm, VFD, BeepJack,

Dual T1-T2

CAT III 600V 600V 300V 300V 600V 600V 600V 1000V 1000V 600V 600V 600V 600V >1000V >1000V >1000V 1000V >1000V >1000V >1000V

CATIV 300V 150V 150V 300V 300V 300V 1000V 1000V 300V 300V 300V 300V 1000V 1000V 1000V 600V 1000V 1000V 1000V

Warranty (years) 1 1 1 1 1 1 1 L.O.P. L.O.P. L.O.P. L.O.P. 1 1 L.O.P. L.O.P. L.O.P. L.O.P. L.O.P. L.O.P. L.O.P.

Multemeters

Clamp meters

FEATURES T2600 BM111M BM127M C2010 C2950 T9001 BM076 TBM116 TBM135 BM086 TBM118 C2108 T9005 BM079 T9105 BM089 BM197 T202 TA3000 BM157

Jaw Size 12 26 28 31x40 35 42 30 45 45 51 45 26 42 35 34x65 51 55 57 194 45

Display Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Digital Adaptor Adaptor Digital

LCD Display Counts 3999 4000 4000 4000 4000 4000 6000 4000 4000 6000 6000 6600 10000 6000 10000 6000 6000 +1999 6000/9999

LCD Display Digits 3 3/4 3 3/4 3 3/4 3 1/2 3 3/4 3 3/4 3 5/6 3 3/4 3 3/4 3 5/6 3 5/6 3 5/6 4 3 5/6 4 3 5/6 3 5/6 3 5/6

Backlight √ √ √ √ √ √ √ √ √ √ √ √ √ √

Bargraph √ √ √

AC Current 200 600 400 600 1000 600 600 1000 1000 1000 2000 660 600 600 1000 1000 2000 1500 3000 1000

DC Current 660 400 600 600 1000 2000 2000

AC Voltage 700 600 600 600 600 600 600 600 600 1000 600 660 600 600 600 1000 1000 600

DC Voltage 1000 600 600 600 1000 600 600 600 600 1000 600 660 600 600 600 1000 1000 600

Auto Ranging √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Reletive Zero √ √ √ √ √ √ √ √ √ √ √

APO √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Resistance 40M 40M 40M 20M 40M 40M 60k 40M 1k 60k 6M 6M 40M 60k 40M 60k 40M

Continuity Buzzer √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Frequency Hz 100k 50k 50k 100k 5M 5-400k 500 5-400k 50k 10k 400 5-400k 400 5-400k 400Hz

Capacitance (µF) 4 3000 4000 200m 100 2500 2500 2000 66m 999.9 2500 999.9 2500 2000

Temperature °C -20 to 300 -20 to 1000 -40 to 400 -50 to 300 -40 to 400 -40 to 1200 -40 to 400 -40 to 1200 -40 to 400 -50 to 1000 -50 to 300

True RMS √ √ √ √ √ √ √ √ √ √ √ √

Diode Test √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Peak Hold √ √ √ √

Data Hold √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Min/Max Recording max max √ √ √ √ √ √ √ max

Special Features Dual Display Leakage, Low Pass Filter

Flashlight. 10A splitter with x1

& x10EF (NCV)

EF (NCV), Inrush I,

AmpTip, Phase Rotation, DC

mA

Comms

Current Logger,

HDT%-R, Serial PC Comms

EF (NCV), Inrush I,

AmpTip, Phase Rotation, DC mA

Comms, EF (NCV) Clamp Light 1MW Imput

Impedance

EF (NCV), Inrush I,

AmpTip, Phase Rotation, DC

mA

EF (NCV), Inrush I,

AmpTip, Phase Rotation, DC

mA

Autocheck, VFD-V, VFD-A,

Inrush, EF, PC Interface

kVA, W, THD%, Serial PC

Comms, cosj

CAT II 600V

CAT III 600V 600V 600V 600V - 1000V 600V 600V 600V 1000V 600V 600V 1000V 600V 1000V 1000V 1000V 600V 600V 600V

CAT IV 300V 300V 300V 300V - 600V 300V 300V 300V 600V 300V 300V 600V 300V 600V 600V 1000V 300V 300V 300V

Warranty Years 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

POW

ERM

ATE

POW

ERL

LOGG

ERS Part no. Description Application

PM10A 10A Model Small offices and businesses

PM10AHD 10A heavy duty model. (15A for a short period)

Offices and businesses

PM10AHDS 10A Model with PC port Offices and businesses

PM15A 15A model Offices and businesses & industrial premises

PMPRO-20A 20 A 3 phase/neutral model with logging and PC port

Offices and businesses & industrial premises

PMPRO-32A 21 A 3 phase/neutral model with logging and PC port

Offices and businesses & industrial premises

Features

ACTEST3 T7107A C8902A T7108 C3121 C3123 T7114 WIBRETEST BT-71EU BT-73EU C3031

Screwdriver Touch Tester NCV Adjustable NCV NCV/ Magnetic NCV/ Torch NCV/Torch/

Magnetic NCV/Torch Voltage TesterLED Voltage

Continuity. RCD trip

LED/LCD Voltage Continuity. RCD

trip

LED/LCD/ Voltage/

Continuity/ Phase Rot.

Audible NCV √ √ √ √ √ √ √ √ √Visual NCV √ √ √ √ √ √ √ √ √ √ √Vibration Detect √AC &/or DC AC AC AC AC AC AC AC AC/DC AC/DC AC/DC AC/DCNCV Detect √ √ √ √ √ √ √ √Magnetic Field Indication √ √Torch Light LED LED Neon √ LEDLCD Backlight √Continuity √ √ √LED Scale √ √ √LCD √ √Phase Rotation √ √

Special FeaturesDetects

energised solenoids

Detects energised solenoids

Single PoleSelf test, Single

Pole, EF, Optional long lead

Self test, Single Pole, EF, RCD

trip, True RMS, Optional long

lead

Single Pole

CATIII 300V 1000V 600V 600V 1000V 1000V 600V 600V 1000V 1000V 1000VCATIV - 1000V 300V 300V 1000V 1000V 300V 300V 600V 600V 600VWarranty 1 1 1 1 1 1 1 1 1 1 1

SCRE

WDR

IVER

VOLT

FIN

GERS

- EF

OR

NON

CON

TACT

VOL

TAGE

DET

ECTO

RS (N

CV)

VOLT

AGE

TEST

ERS

Feature C5900 T860 T606 T855 C895

Voltage Range V 100-600 100-600 100-600 200-600 75-1000

Frequency Hz 45-70 45-70 45-70 50-60 45-70

Pluggable Lead 1m 1m 1m

Fixed Leads 1.5m 1.5m

Fused Leads √

Motor Rotation √ √ √

Special FeaturesNon-contact

Motor Rotation

Non-contact Motor

Rotation

Digital & Compact Analogue

Digital, non-contact

sensors

CAT III 600V 600V 600V 600V 1000V

CATIV 300V 300V 300V 600V 600V

Impulse Withstand Voltages for the IEC61010 CategoriesNominal Voltages Voltage Transients

Phase toNeutral Voltage*

Transient stresses estimated within the installation without any over-voltage limiting

devicesCATII CATIII CATIV

50 500 800 1500

100 800 1500 2500

150 1500 2500 4000

300 2500 4000 6000

600 4000 6000 8000

1000 6000 8000 12000Output Impedance

of Impulse Generator

12Ω 2Ω 2Ω

CPOUCH-1 CPOUCH-2 VPOUCH WIC465 WIC575 WICKIT1 WICKIT2 WICKIT3

Meter Carry Pouch - Single 240 x 125 x 50

Meter Carry Pouch - Double 250 x 200 x 100 CABAC Voltfinger Pouch Waterproof Instrument Case

465 x 360 x 170mmWaterproof Instrument Case

575 x 420 x 210mmWaterproof Case including Foam

465mmWaterproof Case including

Foam & Pouch 465mmWaterproof Case including Foam

575 x 420 x 210mm

PHAS

E RO

TATI

ONKey Features in DMM & Clamp Meters - Explained

Data Hold Freezes the display

Peak/Crest Hold Displays the value of the peak of the AC waveform

Peak to Peak Displays the value of the peak from positive to negative of the AC waveform

True R.M.S. The meter measures the actual root mean square value of distorted AC waveforms

Relative Zero Will adjust the display value to zero so readings can be taken relative to that point

Min/Max Recording The meter will record the minimum and maximum values

EF or NCV

Electric Field detection or non-contact voltage detection. These testers detect the electric field of an AC circuit within a set proximity. They are useful for tracing and locating AC energized conductors. They are not voltage testers.

POUC

HES

CASE

S

CABAC has a policy of continuous product improvement and reserves the right to change materials and specifications without notice. Drawings, where used, are not to scale. All dimensions are in millimetres and sizes given are approximate. Where available, technical and MSDS data sheets are available on the CABAC website. All CABAC products should be installed and used in accordance with manufacturer’s instructions provided. Warning: products may be the subject of registered designs and patents. Refer to CABAC website for terms and conditions on warranty. The one day, one call, one delivery does not cover the following items: Cabchem, Cast Resin kits, Custom manufacturing & kitting, Cabinets, Pillars, CABTRAY & Branch stock orders.

ELECTRICAL TEST EQUIPMENT PURCHASE GUIDECL

AM

P M

ETER

SCA

SES

& PO

UCHE

S

CBTMCHART