22
ELECTRONICS AND COMMUNICATION ENGINEERING MISSION AND VISION OF THE DEPARTMENT: Vision of the Department: To empower the students with technical knowledge, critical thinking ability and social responsibility and also to be a center of excellence in emerging technologies to carry scientific research for the society. Mission of the Department: 1. Imparting technical excellence in Electronics and Communication, to empower students to meet future challenges. 2. Developing the Department into a “Centre of Excellence”. Name of the Department* : Electronics and Communication Engineering Course : BE Level : UG/PG 1st Year of Approval by the Council : UG: F.No. 06/05/TN/E&T/2007/30 Dated : 16.08.2007 PG: F.No Southern/1-1453461222/2013/EOA Dated: 19.03.2013 Year wise Sanctioned Intake : 2018-2019-120 2017-2018-120 2016-2017-120 2015-2016 - 120 2014-2015 180 2013-2014 180 2012-13 180 2011-12 120 2010-11 60 2009-10 60 2008-09 60 2007-08 60 Year wise Actual Admissions : 2018-2019-26 2017-2018-91 2016-2017-64 2015-2016 -- 80 2014-2015 -- 99 2013-2014 --139 2012-13 -- 155 2011-12 116 2010-11 59 2009-10 58 2008-09 56 2007-08 60

ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

ELECTRONICS AND COMMUNICATION ENGINEERING

MISSION AND VISION OF THE DEPARTMENT:

Vision of the Department:

To empower the students with technical knowledge, critical thinking ability and social

responsibility and also to be a center of excellence in emerging technologies to carry scientific

research for the society.

Mission of the Department:

1. Imparting technical excellence in Electronics and Communication, to empower students

to meet future challenges.

2. Developing the Department into a “Centre of Excellence”.

Name of the Department* : Electronics and Communication Engineering

Course : BE

Level : UG/PG

1st Year of Approval by the

Council

: UG: F.No. 06/05/TN/E&T/2007/30 Dated : 16.08.2007

PG: F.No Southern/1-1453461222/2013/EOA Dated: 19.03.2013

Year wise Sanctioned Intake : 2018-2019-120

2017-2018-120

2016-2017-120

2015-2016 - 120

2014-2015 – 180

2013-2014 – 180

2012-13 – 180

2011-12 – 120

2010-11 – 60

2009-10 – 60

2008-09 – 60

2007-08 – 60

Year wise Actual Admissions : 2018-2019-26

2017-2018-91

2016-2017-64

2015-2016 -- 80

2014-2015 -- 99

2013-2014 --139

2012-13 -- 155

2011-12 – 116

2010-11 – 59

2009-10 – 58

2008-09 – 56

2007-08 – 60

Page 2: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

3. Developing a Research Centre in the field of Electronics and Communication

4. Promoting active learning and critical thinking to become Entrepreneurs

5. Promoting ethical values to the Engineering students.

CUT OFF MARKS – GENERAL QUOTA:

Branch Name

2014 2015 2014 2015 2014 2015 2014 2015 2014 2015 2014 2015

OC BC MBC BCM SC/ST SCA

ECE 178.75 151.5 176.2

5 99 172.5 99.25

108

88.7

176

109

-

-

Branch Name

2015 2016 2015 2016 2015 2016 2015 2016 2015 2016 2015 2016

OC BC MBC BCM SC/ST SCA

ECE 191.5 143.1 189.7 110 183.5 104

-

-

168

114

-

-

Branch Name

2016 2017 2016 2017 2016 2017 2016 2017 2016 2017 2016 2017

OC BC MBC BCM SC/ST SCA

ECE 164.69 183.5

7

149.5

0 153

135.8

0 98

191.5

0

190 88.05 180 - -

Branch Name

2017 2018 2017 2018 2017 2018 2017 2018 2017 2018 2017 2018

OC BC MBC BCM SC/ST SCA

ECE 180 135.5 187 133.3 178 94.5 143.5 - 136.5 - 132.7

5 99.3

Branch Name 2018 2019 2018 2019 2018 2019 2018 2019 2018 2019 2018 2019

OC BC MBC BCM SC/ST SCA

ECE 157.5 107.7

5

161.7

5 109.5 154 81 - - 99.5 82.5 85.75 -

Page 3: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

% Students passed with Distinction : 2007-2011 – 15%

2008-2012 – 20%

2009-2013 – 11%

2010-2014 – 9%

2011-2015 – 4%

2012-2016 – 0.73%

2013-2017 – 0%

2014-2018 –0%

% Students passed with First Class : 2007-2011 – 45%

2008-2012 – 60%

2009-2013 – 77%

2010-2014 – 85%

2011-2015 – 75%

2012-2016 – 80%

2013-2017 – 63%

2014-2018 – 63%

Student Placed : 2007-2011 - 21

2008-2012 – 19

2009-2013 – 35

2010-2014 – 48

2011-2015 – 97

2012-2016 – 148

2013-2017 –121

2014-2018 -63

Average Pay Package. Rs/Year : 2007-2011 – Rs.2.4 Lakhs/Year

2008-2012 - Rs.2.2 Lakhs/Year

2009-2013 – Rs.2.3 Lakhs/Year

2010-2014 – Rs.2.3Lakhs/Year

2011-2015 – Rs.2.5 Lakhs/Year

2012-2016 – Rs.1.65 Lakhs/Year

2013-2017 – Rs.1.8 Lakhs/Year

2014-2018 –Rs. 1.4 Lakhs/Year

Students opted for Higher Studies : 2

Accreditation Status of the Course : NA

Doctoral Courses : NA

Foreign Collaborations, if any : NA

Professional Society Memberships : NA

Page 4: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

PROFESSIONAL ACTIVITIES

Date Guest Lecture

29.12.17 Current trends in embedded systems

19.1.18 Network design, troubleshooting, analysis & monitoring

19.2.18 Application of Multiplier IC’s

16.2.18 Wireless Architecture Evolution – 2G to 5G

23.2.18 Random Process & Its Applications

13.3.18 Recent Medical Instruments and its application

9.03.18 Emerging trends in Nano-Tech

24.7.18 IETE-Motivational speech

19.7.18 PCB design

Date WORKSHOP

1.2.18 IoT with Raspberry pi

1.2.18 Mobile servicing

1.2.18 Robotics

1.2.18 Antenna Design &IoT

23.2.18 PSPICE

21.7.18 UAV-Next generation

DEPARTMENT ACHIEVEMENTS:

Research Publications by Faculty Members

1. Sathyaprakash and P Prakasam, “Enhanced approach for wireless sensor network based on

localization, time synchronization and quality of service routing” Cluster Computing, Dec2017.

2. M Narendran and P Prakasam, “An energy aware competition based clustering for cluster head

selection in wireless sensor network with mobility”, Cluster Computing , pp. 1-10,2017,November

2017.

3. P Sathyaprakash and P Prakasam, “Proposed Energy Efficient Multi Attribute Time Slot Scheduling

Algorithm for Quality of Service in Wireless Sensor Network”, Wireless Personal Communications,

pp. 1-18, 97(4) , December 2017.

4. M Narendran and P Prakasam, “An Energy Aware Invasive Weed Optimization Based Clustering in

Wireless Sensor Network and Its Application in Agriculture”, Research Journal of Biotechnology,

Vol. 2017, pp. 187-192

5. S Kasthala, G K D Prasanna Venkatesan, A Amudha, “MIMO PLC Channel Modelling on Indian

Residential Networks”, International Journal of Applied Engineering Research, 12 (14), p.p. 4145-

4151, 2017.

Page 5: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

6. S Kasthala, G K D Prasanna Venkatesan, A Amudha, “Design and Development of Protective

Coupling Interface for Characterizing the Residential Broadband PLC Channel”, Journal of Advanced

Research in Dynamical and Control Systems, 9 (2), 2017.

7. S Kasthala, G K D Prasanna Venkatesan, “Evaluation of Channel Modeling Techniques for Indoor

Power Line Communication”, Progress in Advanced Computing and Intelligent Engineering, Vol 564,

p.p. 577-587, December 2017.

8. G Sathya, C Jeevanantham, K Sangeetha, V Venmathi & P Ramya ,“Bio Metric Authentication system

based on Aadhar card” International Journal of pure and applied mathematics, 117(9), p.p. 7-

11,ISSN No:1311-8080, November 2017.

9. K.K.Rajkumar,”Smart Switch using NFC”,International Journal of Recent Trends in Engineering &

Research, ISSN No:2455-1457,March 2018.

10. T.Gayathri, “The Power of Illusion into Immersion using Artificial Intelligence- Virtual reality” World

Journal of Technology, Engineering & Research,Vol3,Issue1, March2018.

11. T.Gayathri, “CRAM of the prospect transportation” International Journal of Research in Electronics,

Vol5, Issue1,ISSN NO:2349-252x, March2018.

12. T.Gayathri, “VOCROID- Voice Controlled Robot Using Android” International Journal of Science &

Advance Research in Technology,Vol4, Issue2,ISSN No:2395-1052, Feb 2018.

13. G.Sathya,”Rescue Copter”,International Journal of Scientific & Engineering

Research,vol9,issue2,Feb2018.

14. S.Sharmila,”Automated Road Control System using Arduino”,International Journal of Recent Trends

in Engineering & Research,ISSN No:2455-1485,March2018.

15. S.Saranya,”Realisation of Vehicle License Verification System using IOT”, World Journal of

Technology, Engineering & Research,Vol2,Issue1, March2018.

16. T.Gayathri,”Intelligent Transport System for Smart cities”,Asian Journal of Science &

Technology,ISSN NO:0976-3376,March 2018.

17. P.Gnanasundari,”Wireless E-notice board using Raspberry Pi3”,International Journal of Recent

Trends in Engineering & Research,ISSN NO:2455-1457,March 2018.

18. P.Kalaivani,’Patient Monitoring System using Wi-Fi technology”, International Journal of Recent

Trends in Engineering & Research,ISSN NO:2455-1457,March 2018.

19. V.Venmathi,”Fiddle with Stratum Pattern based Personal identification system”,International

Journal of science & Engineering,Vol9,Issue3,march2018.

20. T.Gayathri, M.Sathia Priya, “An Efficient FIR Filter Design Using Dual-Mode Multiplier & Single Phase

Logic Adder” International Journal of Innovative Research Explorer Vol5, Issue3,ISSN No:2347-6060,

March2018.

Page 6: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

International Level conferences

1. G.Sathya, “Rescue Copter”, International conference on Engineering and Technology at Karpagam

College of Technology, December 2017.

2. K.Sangeetha ,“IoT Based Vehicle Monitoring Ideology System for Safety”, International Conference

on Advances in Engineering and Technology at Karpagam Academy of Higher Education

3. S.Saranya, “Realisation of Vehicle License Verification System”, International Conference on

Advances in Engineering and Technology at Karpagam Academy of Higher Education.

4. Jeevanantham, “Spider Wiper”, International Conference on “Recent Researches in Engineering &

Technology ICRRET’18 at Institute of Engineering Research

5. K.Sangeetha, “Automated Manhole and Underground Drainage Monitoring System Using GSM”,

International Conference on Advances in Engineering and Technology at Karpagam Academy of

Higher Education

6. P.Gnanasundari, “IoT Enabled Indoor Air Quality Monitoring & Controlling System”, International

Conference on Advances in Engineering and Technology at Karpagam Academy of Higher Education

7. S.Sharmila, “Automated Road Control System using ARDUINO”,International Conference on

Advances in Engineering and Technology at Karpagam Academy of Higher Education

8. B.Gomathi, “Intelligent Drip Irrigation Process using Wireless Technology”,International Conference

on Advances in Engineering and Technology at Karpagam Academy of Higher Education

9. Kamalakannan, “Water Conservation Real Time Water Monitoring Using Embedded System”,

International Conference on CELICS 18 at Coimbatore Institute of Engineering and Technology

10. P.Kalaivani, “Patient Monitoring System Using Wi-Fi Technololgy”, International Conference on

CELICS 18 at Coimbatore Institute of Engineering and Technology

11. Venmathi, “Fiddle With Stratum Pattern- Based Personal Identification System”, International

Conference on Contemporary Topics in Electrical and Electronics Engineering ICCTEEE’18 at

Karpagam College of Engineering.

12. Rajkumar, “Smart Switch Using NFC”, International Conference on Advances in Engineering and

Technology at Karpagam Academy of Higher Education

13. T.Gayathri, “Intelligent Transport System For Smart Cities”, International conference on Advances in

Engineering & Technology at Karpagam Academy of Higher Education, March 2018.

14. Nikitha.S.Paulin, “Automated Monitoring System for Pisci culture Environment”, International

Conference on Cyber Physical Systems for Next Generation Computing CPSNGC’18 at Bannari

Amman Institute of Technology.

Page 7: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

15. G.Sathya, “An Intelligent Highway Toll Collection System by License Plate Recognition”,

International Conference on Recent Trends in Mathematics and Information Technology

ICRTMIT’18 at Avinashilingam Institute for Home Science and Higher Education for Women.

16. P.Ramya, “Wireless power transfer for electric vehicles charging mutual power transfer coil”,

International Conference on Science, Technology, Engineering and Management ICSTEM’18 at

Kalaignar karunanidhi Institute of Technology.

17. P.Ramya, “Automatic Patch Adhesion Testing Using Arduino”, International Conference on

Bioengineering on Health & Environment at Sathyabama University

18. Sathiya priya, “Lightning Pigeon”, International Conference on Advances in Engineering and

Technology at Karpagam Academy of Higher Education

19. R.Jamuna, ”IOT Based Library Management System”, International conference on Advances in

Engineering & Technology at Karpagam Academy of Higher Education, March 2018.

STUDENTS PUBLICATIONS:

CONFERENCE

1. A Abirami ,”Intelligent transportation system for smartcity”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018.

2. A Ajmal Khan ,”Intelligent transportation system for smartcity”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018.

3. S.Aarthy ,”Intelligent transportation system for smartcity”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018.

4. Monisha R,”Intelligent transportation system for smartcity”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

5. Banumathi R,”Iot based library management system”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

6. Kasthuri M,”Iot based library management”,International conference on global innovations in

computing technology at Karpagam university Coimbatore,5&6 march 2018

7. Kaviya priya dharsini M,”Iot based library management “,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

9.Mimija loamshee fredy ,”Iot based library management”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

8. P.Menaka,”Automated manhole &underground drainage monitoring system using

GSM”,International conference on global innovations in computing technology at Karpagam

university Coimbatore,5&6 march 2018

Page 8: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

9. Ilakiya R,”Automated manhole &underground drainage monitoring system using

GSM”,International conference on global innovations in computing technology at Karpagam

university Coimbatore,5&6 march 2018

10. Haripriya M,”Automated manhole &underground drainage monitoring system using

GSM”,International conference on global innovations in computing technology at Karpagam

university Coimbatore,5&6 march 2018

11. Aishwarya S,”Automated manhole &underground drainage monitoring system using

GSM”,International conference on global innovations in computing technology at Karpagam

university Coimbatore,5&6 march 2018

12. Hariharan A,”Automated road control using ATMEGA 328”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

13. Jeeva.G,”Automated road control using ATMEGA 328”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

14. Mohammed Thoufeek ,”Automated road control using ATMEGA 328”,International conference on

global innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

15. Karhick raja,”Automated road control using ATMEGA 328”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

16. Deepak kumar,”Intelligent drip irrigation using GSM module”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

17. Arun kumar, ”Intelligent drip irrigation using GSM module”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

18. Aslansha, ”Intelligent drip irrigation using GSM module”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

19. Arivunithi ,”Intelligent drip irrigation using GSM module”,International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

20. Alan m babu ,”Rain water harvesting 2.0”,International conference on global innovations in

computing technology at Karpagam university Coimbatore,5&6 march 2018

21. Aruna,”Rain water harvesting 2.0”,International conference on global innovations in computing

technology at Karpagam university Coimbatore,5&6 march 2018

22. M.Bala vignesh,”Rain water harvesting 2.0”,International conference on global innovations in

computing technology at Karpagam university Coimbatore,5&6 march 2018

23. S.Gokul ,”Rain water harvesting 2.0”,International conference on global innovations in computing

technology at Karpagam university Coimbatore,5&6 march 2018

Page 9: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

24. Bharathraj ,”lightning pigeon ”,International conference on global innovations in computing

technology at Karpagam university Coimbatore,5&6 march 2018

25. Lakshminarayanan,”lightning pigeon ”, International conference on global innovations in computing

technology at Karpagam university Coimbatore,5&6 march 2018

26. A.Gokula krishnan, ”lightning pigeon ”, International conference on global innovations in computing

technology at Karpagam university Coimbatore,5&6 march 2018

27. Nazeren davina, ”Automation of floor dispenser sericulture”, International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

28. A.Ramya,”Automation of floor dispenser sericulture”, International conference on global

innovations in computing technology at Karpagam university Coimbatore,5&6 march 2018

29. Srija,”Automation of floor dispenser sericulture”, International conference on global innovations in

computing technology at Karpagam university Coimbatore,5&6 march 2018

30. Nandhini,”Smart switching using NFC”, International conference on global innovations in computing

technology at Karpagam university Coimbatore,5&6 march 2018

31. A.Ramya,”Smart switching using NFC”, International conference on global innovations in computing

technology at Karpagam university Coimbatore,5&6 march 2018

32. R.Nivetha,”Smart switching using NFC”, International conference on global innovations in

computing technology at Karpagam university Coimbatore, 5&6 march 2018.

33. R.Selvam, Participated in Paper Presentation titled Finger Vein Authentication System at Sri

Ramakrishna Engineering College, on 28.12.18 Coimbatore.

34. C.K.Sathya, Participated in Paper Presentation titled Finger Vein Authentication System at Sri

Ramakrishna Engineering College, on 28.12.18 Coimbatore. S.Sushmitha, Participated in Paper

Presentation titled License Tracking in Toll Gate

35. at Sri Ramakrishna Engineering College, on 28.12.18 Coimbatore.

36. M.Bala Surya, Participated in Paper Presentation titled IoT Application in Electronics at Sri

Ramakrishna Engineering College, on 28.12.18 Coimbatore.

37. S.Babysri, Participated in Paper Presentation titled IoT Application in Electronics at Sri Ramakrishna

Engineering College, on 28.12.18 Coimbatore.

38. V.GeethaSree, Participated in Paper Presentation titled IoT Application in Electronics at Sri

Ramakrishna Engineering College, on 28.12.18 Coimbatore.

39. B.Deva Manjula, Participated in Paper Presentation titled Wireless Optical Communication at Sri

Ramakrishna Engineering College, on 28.12.18 Coimbatore.

40. M.Keethika, Participated in Paper Presentation titled Wireless Optical Communication at Sri

Ramakrishna Engineering College, on 28.12.18 Coimbatore.

Page 10: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

JOURNAL

1. C.Babisha, E.S.Balabarathy, “Utilization of Region based algorithm for an image application”

International Journal for Research and Development in Technology, Volume 10, Issue 4, October

2018.

Paper Presented in National Level Technical Symposium

1. D.Nitin Kumar of II ECE “Wireless Communication” at Sri Krishna College of Engineering and

Technology, Coimbatore on September 2017.

2. N.AnuPriya of IV ECE “Internet of Things “ at Government College of Engineering, Barugur,

Krishnagiri, on September 2017.

3. G.Karthiga of IV ECE “Internet of Things “ at Government College of Engineering, Barugur,

Krishnagiri, on September 2017.

4. A.Santhosh of III ECE “VLSI System Design” at Sri Ramakrishna Engineering College Coimbatore

on December 2017.

5. S.Sakthi Kumaran of III ECE “Virtual Reality” at Karpagam University, Coimbatore on December

2017.

6. V.S.Sangeetha of III ECE “Virtual Reality” at Karpagam University, Coimbatore on December

2017.

7. S.S.Pradeeba of III ECE “Future Technology” at Karpagam University, Coimbatore on December

2017.

8. M.Ramya Sri of III ECE “Future Technology” at Karpagam University, Coimbatore on December

2017.

9. M.Koushiga Nanthini of III ECE “Night vision for military applications” at Selvam College of

Technology, Erode on January 2018.

10. R.Suresh Raja of III ECE “Biomedical Instrumentation at Karpagam University, Coimbatore on

January 2018.

11. K.Varun of III ECE “Biomedical Instrumentation at Karpagam University, Coimbatore on January

2018.

12. K.M.Vivek of III ECE “Biomedical Instrumentation at Karpagam University, Coimbatore on

January 2018.

Page 11: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

13. K.Sankar of III ECE “Biomedical Instrumentation at Sri Ramakrishna Engineering Collge,

Coimbatore on January 2018.

14. A.Santhosh of III ECE “Biomedical Instrumentation at Sri Ramakrishna Engineering Collge,

Coimbatore on January 2018.

15. R.Agathiya of IV ECE “Embedded Systems at Bannari Amman Institute of Technology, Erode on

February 2018.

16. S.Monisha of IV ECE “Embedded Systems at Bannari Amman Institute of Technology, Erode on

February 2018.

17. N.Anupriya of IV ECE “Embedded Systems at Bannari Amman Institute of Technology, Erode on

February 2018.

18. B.Kirubakaran of IV ECE “Embedded Systems at Bannari Amman Institute of Technology, Erode

on February 2018.

19. M.Koushiga Nanthini of III ECE “Night vision for military applications” at Danish Ahmed Institute

of Technology, Erode on February 2018.

20. D.Lakshmi Priya of III ECE “Night vision for military applications” at Danish Ahmed Institute of

Technology, Erode on February 2018.

21. M.Sakthi Kumaran of III ECE “Robo Race” at Karpagam University, Coimbatore on February 2018.

22. V.S.Sangeetha of III ECE “Robo Race” at Karpagam University, Coimbatore on February 2018.

23. P.Ramani Shree of III ECE “Robo Race” at Karpagam University, Coimbatore on February 2018.

24. C.Suneka of III ECE “Two wheeler Accident alert,” at St.Joseph Engineering College, Chennai on

February 2018.

25. Shilpa Mohan of III ECE “Two wheeler Accident alert,” at St.Joseph Engineering College, Chennai

on February 2018.

26. Lavanya Priya of III ECE “Five Pen PC Technology,” at Bannari Amman Institute of Technology,

Erode on February 2018.

27. S.Akshaya of III ECE “Five Pen PC Technology,” at Bannari Amman Institute of Technology, Erode

on February 2018.

28. P.Akshara of III ECE “Epples,” at Bannari Amman Institute of Technology, Erode on February

2018.

29. P.Akshara of III ECE “Haptic Technology,” at Bannari Amman Institute of Technology, Erode on

February 2018.

30. M.Pooja Shree of III ECE “Haptic Technology,” at Bannari Amman Institute of Technology, Erode

on February 2018.

Page 12: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

31. V.Kasthuri of III ECE “Haptic Technology,” at Bannari Amman Institute of Technology, Erode on

February 2018.

32. P.Ramani Sri of III ECE “Two wheeler Accident alert,” at MIT, Chennai on February 2018.

33. R.Sri Devi of III ECE “Two wheeler Accident alert,” at MIT, Chennai on February 2018.

34. S.Indumathi of III ECE “Two wheeler Accident alert,” at MIT, Chennai on February 2018.

35. S.Ramya Gowri of III ECE “Two wheeler Accident alert,” at MIT, Chennai on February 2018.

36. S.Indumathi of III ECE “Smart Electronic notice board”, at Hindustan Engineering College,

Coimbatore on February 2018.

37. N.Dharani of III ECE “Smart Electronic notice board”, at Hindustan Engineering College,

Coimbatore on February 2018.

38. L.Kaleeswari of III ECE “Embedded Systems”, at Sri Ranganathar Engineering College,

Coimbatore on February 2018.

39. M.Poovizhi of III ECE “Embedded Systems”, at Sri Ranganathar Engineering College, Coimbatore

on February 2018.

40. M.Koushiga Nandhini of III ECE “Embedded Systems”, at Sri Ranganathar Engineering College,

Coimbatore on February 2018.

41. V.Oviya Priya of III ECE “Embedded Systems”, at Sri Ranganathar Engineering College,

Coimbatore on February 2018.

42. G.Kavibharathi of III ECE “Image Processing”, at Hindustan Engineering College, Coimbatore on

February 2018.

43. R.Arthi of III ECE “Image Processing”, at Hindustan Engineering College, Coimbatore on February

2018.

44. S.Charumathi of III ECE “Image Processing”, at Hindustan Engineering College, Coimbatore on

February 2018.

45. M.Poovizhi of III ECE “Current trends in VLSI”, at Hindustan Engineering College, Coimbatore on

February 2018.

46. M.Kousiga Nandhini of III ECE “Current trends in VLSI”, at Hindustan Engineering College,

Coimbatore on February 2018.

47. V.Oviya Priya of III ECE “Embedded Systems”, at Hindustan Engineering College, Coimbatore on

February 2018.

48. L.Kaleeswari of III ECE “Embedded Systems”, at Hindustan Engineering College, Coimbatore on

February 2018.

49. L.Kaleeswari of III ECE “Embedded Systems”, at Hindustan Engineering College, Coimbatore on

February 2018.

Page 13: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

50. R.Agathiya of III ECE “Automated monitoring of pisiculture environment”, at Sri Ramakrishna

Engineering College,, Coimbatore on February 2018.

51. N.Anupriya of III ECE “Automated monitoring of pisiculture environment”, at Sri Ramakrishna

Engineering College,, Coimbatore on February 2018.

52. B. Kamashinathan of II ECE, Participated in Thulir’18, “Density based Traffic Controller” at SNS

College of Engineering, Coimbatore.(7.9.18)

53. Y.Deebhan of II ECE, Participated in Thulir’18, “Density based Traffic Controller” at SNS College

of Engineering, Coimbatore. (7.9.18)

54. G.Praveen Benet of III ECE, Participated in Thulir’18, “Quadcopter” at SNS College of

Engineering, Coimbatore. (7.9.18)

55. S.Senthil Kumar of III ECE, Participated in Thulir’18, “Density based Traffic Controller” at SNS

College of Engineering, Coimbatore. (7.9.18)

56. V.Vijayesh of III ECE, Participated in Thulir’18, “Density based Traffic Controller” at SNS College

of Engineering, Coimbatore. (7.9.18)

57. M.Kavi Bharathi of IV ECE, Participated in Thulir’18, “Density based Traffic Controller” at SNS

College of Engineering, Coimbatore. (7.9.18)

58. V.Aswin, Participated in Technical Quizz at Sri Ramakrishna Engineering College, on 28.12.18

Coimbatore.

59. S.Avanesh, Participated in Technical Quizz at Sri Ramakrishna Engineering College, on 28.12.18

Coimbatore.

Prizes Won By Our Students in Technical Events

S.No

Name &Branch Prize won

Event Details(Date,Venue,Name of the

Event) Date

1.

S.L.Priyanka P..Priyanka

K.Nandhini

First Catechize at Sri Krishna College of Engineering

and Technology, Coimbatore. 23.3.2017

2. D.Nitin Kumar First Technical Quiz at Sri Krishna College of

Engineering and Technology, Coimbatore 15.09.2017

3. P.Sangeetha

R.Nevetha

A.Ramya

Second Catechize at Sri Krishna College of Engineering

and Technology, Coimbatore. 23.3.2017

4. N.Anu Priya

G.Karthiga First

Technical Event at Government College of

Engineering, Barugur, Krishnagiri. 26.09.2017

Page 14: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

5. S.Sakthi Kumaran

V.S.Sangeetha First

Technical Quizz at Karpagam University,

Coimbatore. 27.12.2017

6. S.S.Pradeeba

M.Ramya Sri Second

Technical Quizz at Karpagam University,

Coimbatore. 27.12.2017

7. T.Arivunidhi Sixth Tamilnadu Basket ball association Refree Contest at Chennai.

28.12.2017

8. V.S.Sangeetha First Participated in throw ball event at SNS College

of Engineering. 28.2.2018

9. S.Preetha First Participated in Kho Kho event at SNS College

of Engineering, Coimbatore.

28.2.2018

10.

V.Ramya Gowri First Participated in Volley Ball event at SNS

College of Engineering, Coimbatore.

28.2.2018

11.

G.Prithiyuman Second Participated in Kho Kho event at SNS College

of Engineering, Coimbatore.

28.2.2018

12.

G.Prithiyuman First Participated in Hand Ball event at SNS College

of Engineering, Coimbatore.

28.2.2018

13. G.Prithiyuman Second Participated in Kabbadi event at SNS College

of Engineering, Coimbatore.

28.2.2018

14. G.Prithiyuman First Participated in Hockey event at SNS College

of Engineering, Coimbatore.

28.2.2018

15. C.Pooja Shri Second Participated in Throw Ball event at SNS

College of Engineering, Coimbatore.

28.2.2018

16. S.Preetha Second Participated in Throw Ball event at SNS

College of Engineering, Coimbatore.

28.2.2018

17. S. Preetha First Participated in Volley Ball event at SNS

College of Engineering, Coimbatore.

28.2.2018

18. M. Ramya Sri First Participated in Throw Ball event at SNS

College of Engineering, Coimbatore.

28.2.2018

19. M.Prasanth First Participated in Hockey event at SNS College

of Engineering, Coimbatore.

28.2.2018

20. T.Selvamani Second Participated in Hockey event at SNS College

of Engineering, Coimbatore.

28.2.2018

21. S.S.Rohith First Participated in Hockey event at SNS College

of Engineering, Coimbatore.

28.2.2018

22. R.Arthi Second Participated in Throw Ball event at SNS

College of Engineering, Coimbatore.

28.2.2018

Page 15: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

23. S. Priyadharshini First Participated in Throw Ball event at SNS

College of Engineering, Coimbatore.

28.2.2018

24. M.Yuga Priya First Participated in Volley Ball event at SNS

College of Engineering, Coimbatore.

28.2.2018

25. M.Yuga Priya First Participated in Table Tennis event at SNS

College of Engineering, Coimbatore.

28.2.2018

26. M.Yuga Priya First Participated in Kho Kho event at SNS College

of Engineering, Coimbatore.

28.2.2018

27. M.Yuga Priya First Participated in Carrom event at SNS College

of Engineering, Coimbatore.

28.2.2018

28. R. Udhaya Second Participated in Table Tennis at SNS College of

Engineering, Coimbatore.

28.2.2018

29. R. Udhaya First Participated in Kho Kho event at SNS College

of Engineering, Coimbatore.

28.2.2018

30. R.Pavithra Second Participated in Volley Ball event at SNS

College of Engineering, Coimbatore.

28.2.2018

31. R.Pavithra Second Participated in 200 m track event at SNS

College of Engineering, Coimbatore.

28.2.2018

32. R.Pavithra Second Participated in 100 m track event at SNS

College of Engineering, Coimbatore 28.2.2018

33. R.Pavithra Second Participated in Long Jump track event at SNS

College of Engineering, Coimbatore

28.2.2018

34. R.Pavithra Second Participated in Triple Jump track event at SNS

College of Engineering, Coimbatore

28.2.2018

Participation in Work Circuit Debugging, Quiz & Other Events

S.No. Name of students Date Workshop/Seminar/Quiz –

Venue details

2. M.Praveen 4.1.18 Participated in Workshop on Robotics

at Indian Institute of Technology,

Madras.

3. S.Yogesh Raj

4. S.Vishnu Priya

5. R.Vergil heleena

6. T.S.Venkatesh Babu

7. A.Santhosh

8. K.Prem Kumar

9. G.Santhosh Kumar 5.1.18 Participated in Seminar on Defense

Training at SNS College of Engineering, 10. S.Yogesh Raj

Page 16: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

11. K.M.Vivek Coimbatore.

12. T.S.Venkatesh Babu

13. K.Sankar

14. S.Pavithra 10.1.18 Participated in Workshop on

Application development using MIT

Software at Sri Ramakrishna Institute of

Technology, Coimbatore.

15. C.Prabanchan

16. V.Karthick

17. C.Aravind

18. R.Monikaa

19. N.Mouriya

20. K.R.Akshara 23.1.18 Participated in Code Vita Contest at Sri

Ramakrishna Engineering College,

Coimbatore.

21. S.Indumathi

22. S.Pooja Shree

23. S.Lavanya Priya

24. A.Kasthuri

25. J.P.Akshaya

26. S.Vishnu Priya 2.2.18 Participated in workshop on

Underwater Robotics at Anna

University, Chennai.

27. V.Yogesh raj

28. S.Vergil Heleena

29. N.Mouriya 9.2.18 Participated in workshop on Android

Development at Sri Ramakrishna

Institute of Technology, Coimbatore.

30. C.Prabanchan

31. V.Karthick

32. C.Aravind

33. R.Monikaa

34. S.pavithra

35. M.Kousiga Nandhini 10.2.18 Participated in circuit debugging, at

Danish Ahmed Institute of Technology, 36. D.Lakshmi Priya

Page 17: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

Coimbatore.

37. M.Sakthi Kumaran 11.2.18 Participated in project presentation on

Robo Race, at Karpagam university,

Coimbatore.

38. P.Ramani Sri

39. V.S.Sangeetha

40. M.Kousiga Nandhini 13.2.18 Participated in project presentation on

embedded systems, at Karpagam

university, Coimbatore. 41. D.Lakshmi Priya

42. S.T.Harini

M.Oviya Priya

15.2.18 Participated in workshop on PCB Design

at NIT Trichy

43. V.Poovizhi

44. S.Kaleeswari

45. C.Suneka 16.2.18 Participated in event Mathomania at

MIT, Chennai. 46. Shilpa Mohan

47. P.Ramanisree 16.2.18 Participated in event Connexion at MIT,

Chennai. 48. S.Ramya Gowri

49. R.Sri devi

50. C.Suneka 16.2.18 Participated in event Blind Off at MIT,

Chennai. 51. Shilpa Mohan

52. P.Ramanisree 16.2.18 ticipated in event Circuit Debugging at

MIT, Chennai. 53. S.Ramya Gowri

54. R.Sri devi

55. K.Karthik 22.2.18 Participated in workshop on Digital

Forensics at Amrita University,

Coimbatore. 56. A.Nithin

57. B.Padmanaban M.Sundar

23.3.18 Presented a paper titled Digital Currency at Government College of Technology, Coimbatore.

58. K.Varun Kumar V.Priyadharshini G.L.Vinitha Alamelu

23.3.18 Presented a paper titled Industrial IoT at Government College of Technology, Coimbatore.

Page 18: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

59.

R.Raven Jabha Joseph S.Senthil Kumar T.Nithis Kumar R.Mercy Lidia

16.3.18 Participated in workshop on AVR at Madras Institute of Technology, Chennai.

60. M.Poovizhi S.T.HArini

22.3.18 Participated in project presentation on Spider Wiper at United Institute of Technology, Coimbatore.

61. J.Jaya Kumar 9.3.18 Participated in workshop on IoT at

Madras Institute of Technology, Chennai.

62. A.Santhosh 22.3.18 Presented a paper titled Conserve for

future at Kongu Engineering College, Erode.

63. A.Santhosh 22.3.18 Participated in General Quizz at Kongu Engineering College, Erode.

64. A.Santhosh 22.3.18 Participated in Drawing Competition at Kongu Engineering College, Erode.

65.

S.Vishnu Priya R.Vergil Heleena

7.3.18 Presented a paper titled Smart Bike System in National Conference on convergence technologies in biomedical engineering at SNS College of Technology, Coimbatore.

66.

Keerthivasan.R Hari.S Sasidharan.P Vasanth.R Venugopal.S

23.3.18 Presented a paper titled Digitalized Compact Automated Patch Adhesiveness Tester in International Conference on Electronics, Information and Communication Systems at Coimbatore Institute of Engineering and Technology, Coimbatore.

67.

Shimona Neethi.C Ranjitha.T Swetha.S

23.3.18 Presented a paper titled Design and optimization of MIMO antenna for 5G wireless system in International Conference on Electronics, Information and Communication Systems at Coimbatore Institute of Engineering and Technology, Coimbatore.

68.

Vanjitha Priyadharshini.R

Sangeetha.A

23.3.18 Presented a paper titled Robbery evading Safety Apparatus in International Conference on Electronics, Information and Communication Systems at Coimbatore Institute of Engineering and Technology, Coimbatore.

69.

Sangeetha.P

Soundarya.N

Sowmiya.M

23.3.18 Presented a paper titled Wireless E-Notice Board Using Raspberry Pi in International Conference on Electronics, Information and Communication Systems at Coimbatore Institute of Engineering and Technology, Coimbatore.

Page 19: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

70.

Priyanka.P

Priyanka.S.L

Vidhya Susila Devi.M

23.3.18 Presented a paper titled Patient monitoring system using wifi in International Conference on Electronics, Information and Communication Systems at Coimbatore Institute of Engineering and Technology, Coimbatore.

71.

Nandhini.K

Nivetha.R

Ramya.A

23.3.18 Presented a paper titled Smart switch using NFC in International Conference on Electronics, Information and Communication Systems at Coimbatore Institute of Engineering and Technology, Coimbatore.

72.

Hariharan.A Jeeva G

Mohamed Thoufeek. A

Karthik Raja

23.3.18 Presented a paper titled Automated Road Control System Using ATMEGA 328 in International Conference on Electronics, Information and Communication Systems at Coimbatore Institute of Engineering and Technology, Coimbatore.

73.

Sathana.S

6.3.18 Presented a paper titled Efficient analysis in agriculture using BLE in International Conference on Emerging Trends in Engineering, Science and Sustainable Technology at Erode Sengunthar Engineering College, Erode.

74.

Karthiga.G

Keerthana.R

Isswariya.M

Aswini.N

6.3.18 Presented a paper titled Model Predictive Control Oriented Shared Steering control for intelligent Vehicles in International Conference on Emerging Trends in Engineering, Science and Sustainable Technology at Erode Sengunthar Engineering College, Erode.

75.

Indrijith. K.V

Magesh Kumar.M

Gopalakrishnan.P

6.3.18 Presented a paper titled Wireless Power Transfer for Electric Vehicle Charging using Mutual Power Transfer Coil in International Conference on Science, Technology, Engineering and Management at Kalaignar Karunanidhi Institute of Technology, Coimbatore.

76. T.Arivunidhi 6.3.18 Participated in Basketball match at

M.Kumarasamy College of Engineering, Erode.

77. T.Arivunidhi 20.3.18 Participated in Basketball match at

Tamil Nadu Engineering College, Coimbatore.

78. K. Nandhini R. Nivetha A. Ramya

4.4.18 Published a paper on Smart Switch Using NFC in International Journal of Recent Trends in Engineering and

Page 20: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

P. Sangeetha Research

79.

M. Sowmiya N. Soundarya

4.4.18 Published a paper on Wireless E-Notice Board Using Raspberry PI 3 in International Journal of Recent Trends in Engineering and Research

80.

S.L. Priyanka P. Priyanka

4.4.18 Published a paper on Patient Monitoring System Using Wi-FI Technology in International Journal of Recent Trends in Engineering and Research

81.

S. Aarthy S. Abirami A. Ajmalkhan R. Monisha

6.4.18 Published a paper on Intelligent Transport System For Smart Cities in Asian Journal of Science and Technology

82.

D. Vishnu Priya G. Sowmya R. Tamilselvi

6.4.18 Published a paper on Fiddle with Stratum Pattern-Based Personal Identification System in International Journal of Scientific & Engineering Research

83.

D.Geethasri P.G.Barathwaj

13.8.18&14.8.18

Participated in Throw Ball Match held at KPR Institute of and Technology, Coimbatore.

84. M.Ashika 27.8.18 Participated in Volley Ball Match held

at SNS College of Engineering, Coimbatore.

85. K.Aswin kumar 13.8.18& 15.8.18 Participated in Cricket Match held at

Kumaraguru College of Technology, Coimbatore.

86. S.Balaji Antony Samrat

16.8.18 Participated in Hockey Match held at Kumaraguru College of Technology, Coimbatore.

87. S.Balaji 20.8.18& 21.8.18 Participated inBasket Ball Match held at

INFO Institute of Engineering, Coimbatore.

88. Atchaya M.Ashika

12.8.18 Participated in workshop on IOT at Dr.N.G.P Institute of Technology, Coimbatore.

89. S.Balaji K.Divakar

21.8.18 Participated in Throw Ball Match held at CMS College of Engineering, Coimbatore.

90. V.Arun kumar 27.8.18 Participated in NSS Cleaning Campaign

held at SNS College of Engineering, Coimbatore.

91. R.Bala suriya 23.8.18 Participated in cricket match held at

United Institute of Technology, Coimbatore.

92. K.Gogul 11.8.18 Participated in basket ball match held at Kamarajar Mandram, Erode.

Page 21: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

93. K.Gogul 13.8.18& 14.8.18 Participated in Throw ball match held

at Kumaraguru College of Technology, Coimbatore.

94. K.Gogul 24.8.18& 25.8.18 Participated in cricket match held at

Akshaya College of Technology, Pollachi.

95. S.Karthikaiselvan

23.8.18 Participated in volley ball match held at Sankara College of Technology, Coimbatore.

96. N.Kasthuri R.Andrew Paul Y.Deebhan

25.8.18 Participated in workshop on IOT held at Arris Automation and Solution, Coimbatore.

97.

C.Nisha B.Mohana preethi M.Vinothini S.P.Nishalineya K.Sasi kumar B.Sabariraj Pavithran Sakthibalasundaram B.Vignesh Sundarajan S.Sanjeev Thalapathy

15.8.18 Participated in workshop on Android Application development held at Sri Ramakrishna Institute of Technology, Coimbatore.

98. P.Priyadharshini C.Sowmiya

27.8.18 Participated in Throwball match held at SNS College of Engineering, Coimbatore.

99. R.Rajesh kanna 27.8.18 Participated in NSS cleaning campaign

held at SNS College of Engineering, Coimbatore.

100.

C.K.Sathya S.Sushmitha T.Miraclene

27.8.18 Participated in workshop on Game development held SNS College of Technology, Coimbatore.

101.

L.Praveena B.Sandya R.Rakshana R.Tharani K.Reena Roy P.Praveen pandian

26.8.18 Participated in workshop on Embedded and IOT held at Pantech solutions, Coimbatore.

102. D.Nitin kumar R.Raven Jabha Joseph B.Mithra

25.8.18 Participated in workshop on Internet of Things held at Arris Automation and Solutions, Coimbatore.

103. B.Surya 31.8.18 Participated in cricket match held at

SNS College of Engineering, Coimbatore.

104.

R.Pavithra V.Priyadharshini K.Varun Kumar Rajesh Kumar

31.8.18 Participated in Workshop on Artificial Intelligence and Robotics at Coimbatore Institute of Technology, Coimbatore.

Page 22: ELECTRONICS AND COMMUNICATION ENGINEERING · 19.7.18 PCB design Date WORKSHOP 1.2.18 IoT with Raspberry pi 1.2.18 Mobile servicing 1.2.18 Robotics 1.2.18 Antenna Design &IoT 23.2.18

V.Padmanaban

105.

P.Keerthana T.Krishna Pirathai S.Gowri C.Archana N.Malavika

31.8.18 Participated in Workshop on Artificial Intelligence and Robotics at Coimbatore Institute of Technology, Coimbatore.