Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
PKFY-P VAM-EPKFY-P VGM-EPKFY-P VFM-E
INDOOR UNIT
Wall mountedtype
Elegant Design and Compact Dimensions Ideal for Offices,
Stores and Residential Uses.
PKFY-P VAM-EPKFY-P VGM-EPKFY-P VFM-E
PKFY-P VFM
PKFY-P VGMPKFY-P VAM
Front grille opens out
P20Capacity P25 P32 P40 P50
VAM
VGM
VFM
P63 P100
Capacity range
3
1
2
Width reduced by 20% to a compact
990mm*. *: 39in.
Extra compactness has been achieved thanks
to a 20%(260mm(10-1/4in.))
reduction in which compared with previous
models.
Compact design with 990mm* width
(PKFY-P VGM)
The front power supply box allows electrical
wiring work to be done after the indoor unit
has been installed. For easier installation, all
the screws required for securing the indoor
unit to the wall are accessible from the front
of the unit.
Front power supply box for easier wiring even after installation
All piping including drainage can be
connected from the rear, right, base, and left
of the unit, providing much greater flexibility
out piping and selecting installation site.
5-way piping provides more flexibility in selecting installation sites
Compact 295mm(11-5/8in.) high body fits snugly in even limited spaces (PKFY-P VAM)
Lightweight 8.5kg(20lbs) unit easy to transport and install (PKFY-P VAM)
Auto-flap shutter enhances good looks
In room air conditioning style, the grille
opens out allowing the filter to be removed.
The filter and open grille can therefore be
thoroughly and easily cleaned.
Among the quietest in the industryAirflow passage configuration that assures quiet operations
1. The unit incorporates a randon pitch cycling fan. By changing fan
intervals reduction in airflow. Optimal design of the airflow passage
gives a shorted fan diameter and allows a highly compact installation.
2. Thanks to a highly practical casing configuration, airflow
generated by the fan is distributed uniformly.
3. Due to careful positioning of the vertical vane axis, air is blown
evenly from the fan. This prevents mixing with secondary air,
and also suppresses condensation.
Quiet operation (PKFY-P VGM)
Front grille opens out - easy filter cleaning (PKFY-P VGM)
37
External Dimensions
Specifications
INDOOR UNIT
Specifications & External Dimensions
Unit : mm
PKFY-P VAM-EPKFY-P VGM-E
PKFY-P20VAM-E~ 220-240V 50Hz ~ 220V 60Hz
PKFY-P25VAM-E PKFY-P32VGM-E PKFY-P40VGM-E PKFY-P50VGM-E
2,000 2,500 5,000
2.2 2.8 5.6
2.5 3.2 6.3
0.040.040.200.20
Power source
Cooling capacity
kWCoolingHeatingCoolingHeating
kWA
A
kg(lbs.)
m 3/min
Pa
L/scfm
kW
mm(in.)
mm(in.)
dB(A)
Heating capacity
Powerconsumption
Current
External finish(Munsel No.)
Net weight Heat exchanger
Fan
Type
Airflow rate g 3
(Lo-Mid2-Mid1-Hi)
External static pressure
MotorOutput
Type
Air filter
Refrigerant pipe diameter
Gas(Flare)
Liquid(Flare)
Drain pipe diameterNoise level (Lo-Mid2-Mid1-Hi) g3 g4
Plastic 2.60Y 8.66/0.69
8.5(19)
Line flow fan 51
4.9-5.2-5.6-5.982-87-93-98
173-184-198-208133-158-175-192283-335-371-406
150-167-183-200318-353-388-424
0Single phase induction motor
PP Honeycomb (long life)
ø 12.7(1/2")
ø 6.35(1/4")
I.D. ø16 (VP-16) I.D. ø20 (VP-20)
32-33-35-36
0.017
Cross fin (Aluminum plate fin and copper tube)
3,150 4,000
3.6 4.5
4.0 5.0
0.070.070.320.32
Plastic <PS,ABS> white 0.70Y 8.59/0.97
16(36)
8-9.5-10.5-11.5
33-36-38-41
0.030
9-10-11-12
34-37-40-43
7,500 9,600 12,3002.3 2.9 3.7
15,400 19,1005.84.7
2,200 2,800 3,4008,500 10,900 13,600
4,300 5,40017,100 21,500
ø 12.7(1/2") / ø 15.88(5/8")(Compatible)
ø 6.35(1/4") / ø 9.52(3/8")(Compatible)
mm(in.)Dimension H x W x D 295 x 815 x 158 (11-5/8" x 32-1/8" x 6-1/4") 340 x 990 x 235 (13-7/16" x 39" x 6-5/16")
kcal/h
kWg 1
g 2
kcal/hkWg 1
g 1
BTU/hkW
g 1
g 2
BTU/hg 1
Note:
g 3 Airflow rate/noise level are in (low-middle2-middle1-high).g 4 It is measured in anechoic room.
g 1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.Cooling : Indoor 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB,Outdoor 35˚C(95˚F)DBHeating : Indoor 20˚C(68˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
g 2 Cooling capacity indicates the maximum value at operation under the following condition.Cooling : Indoor 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB,Outdoor 35˚C(95˚F)DB (WR2: water 30˚C(80˚F))Heating : Indoor 21˚C(69.8˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB (WR2: water 20˚C(68˚F))
2.5 60 150
520 Liquid pipe
450 Gas pipe
660 (Total length of drain piping 760) 110
116
5
60
146
37.4
70.3
630 Intake dimensions
13
13
25
.5
695 Outlet dimensions
29
5
21.5
815
783
158
PKFY-VAMMITSUBISHI
Adress board
Remote controlterminal plate
Power terminal plate
Inta
ke
dim
en
sio
ns
Dip switch (switches functions)
Rotary switch (own address)
Rotary switch (pair No.)
Address board
Installation board
Terminal plateOutletdimensionsOutlet
direction
Intakedirection
Outletangle
17˚
247.5 Intake dimensions
The address board is protected bya plastic cover.Remove the cover with a screwdriver(one screw) to set the board.
Liquid pipe ø6.35
Gas pipe ø12.7
PKFY-P20, 25VAM-E
Knock out hole for right piping Refrigerant pipe.Drain pipe.Wiring hole
Gas pipeLiquid pipe
Address board
Terminal block for power supply
Terminal block forremote control
Filter grip
2121
Knock out hole for under pipingRefrigerant piping.Drain pipe.Wiring hole
Service panel(Power supply access)
Gas pipe
ø12.7
Liquid pipe
ø6.35
50
32,40
Model
(Flexible hose total length 800)(Right side piping installation)
(Left side piping installation)
Drain pipe (O.D. ø20)
Front view(to open the grille)
12-Louvers (manual)
Air outletLower side
Auto vane
Left sideFront view
Air intake
Air intake
Air intake
Air
inta
ke
Knock out hole for left piping Refrigerant pipe.Drain pipe.Wiring hole.
Right side
35
700 153
549 86
481 54
3128
0
80
60
7024
5
50
395400
190
60
70 35
79
160 40
705 235
Less than 15
198
7024
5
60
235
53
340
715 225
340 80 280 233
990
MITSUBISHI ELECTRIC
ø 6.35(R410A) ø9.52(R407C,R22)
ø 12.7(R410A) ø15.88(R407C,R22)
PKFY-P32,40,50VGM-E
54
External Dimensions
Specifications
INDOOR UNIT
Specifications & External Dimensions
PKFY-P63VFM-E PKFY-P100VFM-E Unit : mm
PKFY-P63VFM-E PKFY-P100VFM-EPower source
kcal/h
kW
BTU/hCooling capacity
g 1
g 2
g 1
g 1
g 1
kW
BTU/hkWCooling
Heating
Cooling
Heating
kW
A
A
mm(in.)
mm(in.)
mm(in.)
kg(lbs.)
m3/min
Pa
kW
mm(in.)
mm(in.)
dB(A)
Heating capacity
Powerconsumption
Current
External finish(Munsel No.)
Dimension
Height
Width
Depth
Net weight
Heat exchanger
Fan
Type
Airflow rate g 3(Lo-Hi)
External static pressure
MotorOutput
Type
Air filter
Refrigerant pipe diameter
Gas(Flare)
Liquid(Flare)
Drain pipe diameter
Noise level (Lo-Hi) g3 g4
220-230-240V 50Hz / 220V 60Hz
6,300
7.1
24,200
8.0
27,300
0.12
0.12
0.55
0.55
Plastic, white : <3.4Y7.7/0.8>
340(13-3/8)
1,400(55-1/8)
235(9-1/4)
340(13-3/8)
235(9-1/4)
24(53)
Line flow fan 5 2
15-20
0
Single phase induction motor
PP Honeycomb (antibacterial)
ø15.88(5/8)
I.D. ø20 (VP-20)39-45
0.040
Cross fin (Aluminum plate fin and copper tube)
10,000
11.2
38,200
12.5
42,700
0.14
0.14
0.64
0.64
28(62)
22-28
ø15.88(5/8) / ø19.05(3/4)
ø9.52(3/8)
41-46
0.070
1,680(66-1/8)
PKFY-P VFM-E
g1 Cooling Indoor: 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB, Outdoor: 35˚C(95˚F)DB
Heating Indoor: 20˚C(68˚F)DB, Outdoor: 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
g2 Cooling Indoor: 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB, Outdoor: 35˚C(95˚F)DB
g3 Airflow rate/noise level are in (low-high).
g4 It is measured in anechoic room.
Note: 1. Cooling/heating capacity indicates the maximum value at operation under the following condition.
91
225
184
30
240 180 280 314
18 18
10X91=(910) 285
30
30
19900
90610
280
60
245455
29
10
990
80
12-ø6 holefor tapping screw
32-ø12 hole
for bolt
Wall fixture
Rear piping hole
66-ø6 hole
for tapping
screw
Unit center
Bolt
Less than 15
Drain hose
111
Drain hose for
left-hand side piping
107
183
55(Gas pipe)
120(Liquid pipe)
42 58
Drain hose
45 45 45
Knock out hole for wiring
A B C3030
39
B
A
74
C
9837
7437
65
4
39
39
100
32
37
100
4
552 Air outlet
1120
340 197
13
62.5
235 235
1400
240
1090 Air intake
235
552 Air outlet
235
235
1
2
25
1110 (Drain hose)
Knock out hole
for left piping
Drainage range on left hand side
Knock out hole for under-piping
Refrigerant pipe .Drain pipe
Drainage range on right-hand side
Left side
Lower side louvers(manual)Auto vanes
Range for left rear piping hole
Under panel(Removable at
left-hand side piping)
Unit out line
Wall fixture
Rear piping hole
295 225
Range for left rear piping hole
30
184
240 180 280 314
1818
80
13X91=(1183)
91
1270
10
30
30
19900
595
750
60
245
285
90
29
280
84-ø6 hole
for tapping
screw
41-ø12 hole
for bolt
12-ø6 hole
for tapping screw
Unit center
Bolt
Range for left rear piping hole
Drainage range on left hand side
Drainage range on right-hand side
1
2
A
A CB
100
439
7437
65
37
393298
4
7437
39100
30 30
Drain hose for
left-hand side piping
42
58
694 Air outlet240
45
340
13
45
62.5
235 45235
1400
235
1370 (Air intake)
235
183
55 (Gas pipe)
Under panel(Removable at left-hand side piping)
120 (Liquid pipe)
694 Air outlet
235
C
Drain hose
1680
Less than 15
111
102
1110 (Drain hose)
25
197
235
Knock out hole
for left piping
Knock out hole for under-piping
Refrigerant pipe .Drain pipe
Right side
Left side
Top
45
Lower side
louvers(manual) B
Knock out hole for wiring
Auto vanes
Front Knock out hole
for right piping
55