Emhart POP Blind Rivet Nuts, Jack Nut

7/16/2019 Emhart POP Blind Rivet Nuts, Jack Nut

http://slidepdf.com/reader/full/emhart-pop-blind-rivet-nuts-jack-nut 1/36

www.emhart.com

Threaded Insert Systems



Creating the Future...Worldwide

Creating the Future is about growth, it’s about change,

and it’s about taking risks.

At Emhart we believe in seeking ways to serve our customers better.

We create the uture by anticipating our customers needs. Through

diversiying our product lines, creating unique assembly technologies and

oering a breadth o service to the demands o industry worldwide Emhart

provides technological solutions to over 100 dierent industries.

Our product lines include:-

POP® Riveting Systems

POP Nut™ Threaded Inserts

Tucker® Stud Welding

Sel Piercing Systems

1



S P A I N

S W E D E N

N O R W A Y F I N L A N D

U N I T E D

K I N G D O M

F R A N C E

N E T H E R -

L A N D S

G E R M A N Y P O L A N D

D E N M A R K

P O R T U G A L

C Z E C H

R E P U B L I C

E S T O N I A

L I T H U A N I A

I T A L Y

H U N G A R Y

B E L G I U M

R E P U B L I C

O F I R E L A N D

A U S T R I A

T U R K E Y G R E E C E

S W I T Z E R L A N D

Manuacturing

Sales Oice

Warehouse

Distribution Network

Distribution NetworkSales Oice


Sales Oice

Warehouse


Creating the Futurethroughout Europe

Emhart’s European acilities are ideally located to provide

eective local coverage throughout the whole o Europe.

Oering local expertise with the backing o a Global organisation,

Emhart can proactively respond to the needs o a diverse range o

customers rom Construction to Electronics and rom Automotive

to Aerospace. Serving our European customers directly or through

our network o experienced distributors we deliver quality

products and services on time, every time.

Further contact details can be ound on the back cover

2



Jack Nut®

Jack Nut® is designed to be installed in sot or brittle materials such as

plastic, cardboard or glass.

Available in steel as standard or brass, Jack Nut® has 4 “legs” which expand behind theparent material providing excellent pull out resistance.

It provides a screw thread or subsequent component assembly and can be installed into tubularmaterials where only one side o the application is accessible.

Manufactured to the highest industry standards, POP Nut™ WellNut® and Jack Nut®

are RoHS, ELoV & WEEE compliant.

WellNut®

WellNut® is ideal or isolating against vibration, electrical conductivity and

galvanic corrosion and or sealing against ambient moisture & gases.

Available in Neoprene as standard or EPDM, which is ideal or applications in the outdoorenvironment, WellNut® can be simply installed rom one side o the application when themating screw is tightened.

POP Nut™

POP Nut™ Threaded Inserts can be installed into sheet-metal, tubing,

extrusions, plastics and other materials to provide an internal thread

or subsequent component assembly.

POP Nut™ is the perect solution or providing high quality, load bearing threads even in single thinsheets down to 0.5mm. POP Nut™ can be used in a variety o materials where alternative methodscannot maintain torque and pull out loads. They enable components which are assembled later in theproduction cycle to be adjusted and are ideally suited to applications where access is only available

rom one side o the workpiece.



www.emhart.com

Threaded Insert Systems

4

Introduction 5

Range Guide 6

Joint Design 7Strength Performance 8

Technical Data 9

Aluminium 11

Steel 14

Stainless Steel 23

Hand Tools 26

Power Tools 27

WellNut® 29

Jack Nut® 32

Glossary & Technical Advice 34

POP Nut™

POP Nut™ Tools



The POP Nut™ installation sequence is simple.

1. Push the POP Nut™ on the tool mandrel and it automatically spins on.

2. Place the POP Nut™ in the hole in the parent material.

3. Pull the trigger on the tool. The POP Nut™ collapses and ormsa ange on the back side o the parent material. The toolautomatically reverses and unthreads rom the POP Nut™.

4. Attach the mating part with a bolt and tighten.

5 www.emhart.comPOP Nut™ Threaded Insert Systems


http://slidepdf.com/reader/full/emhart-pop-blind-rivet-nuts-jack-nut 7/366POP Nut™ Threaded Insert Systemswww.emhart.com

Range Guide

Aluminium Stainless Steel

Open End

Closed End

Flat Head

Flat Head

Countersunk Head

Countersunk Head

Reduced Head

Round

PAFO 11

PAKO 12

PAKC 12

PAFC 11

PARO 13

Semi-HexagonalRound

PTFO 23

PTKO 24

PTFOM 25

PTROM 25

PVFC 23

PTRO 24

Steel

Open End

Closed End

Flat Head

Flat Head

Countersunk Head

Countersunk Head

Reduced Head

Reduced Head

Semi-HexagonalHexagonalLinear KnurlsRound

PSZFO 15 PSZFON 14

PSZKON 16

PSZFOH 20

PSZKO 17

PSZKC 17 PSZKCN 16

PSZRCH 21

PSZFC 15 PSZFCN 14 PSZFCH 20

PSZROM 22PSZRO 18PSZROX 19

PSZRON 18 PSZROH 21

For additional details on product eatures - please reer to the glossary on page 33


http://slidepdf.com/reader/full/emhart-pop-blind-rivet-nuts-jack-nut 8/367 www.emhart.comPOP Nut™ Threaded Insert Systems

The POP Nut joint

The ideal POP Nut™ joint is one where the mating part is

non-rotational and contacts the head o the POP Nut™.

Mating part ft

The hole in the mating part should be smaller than the

POP Nut™ head to insure contact with the POP Nut™ threads.

Tool access

The POP Nut™ tool must have perpendicular access to

the parent material. I the tool is held at an angle it can

cause premature mandrel wear.

Grip range

The parent material thickness must be within the

recommended grip range o the POP Nut™.

Backside clearance

Ensure sufcient clearance on the blind side when usingPOP Nut™ in tube sections, extrusions and other closed

applications.

Making the hole

The hole or the POP Nut™ must be square to the parent

material. Holes drilled or punched at an angle can cause

premature tool mandrel wear.

POP Nut™ Joint Design



Strength Perormance

Strength Test Methods or POP Nut™

Ultimate Torque Thread Shear

Test conditions

•Basematerial:Steel,1.2mmthickness

•Afxingplate:SK3(HRC40orabove)

•Bolt:Hexboltorcapscrew(10.9orgreater)

•Washer:Stainlesssteel,smallroundtype

Apply torque to the bolt using a torque wrenchand measure the maximum torque at whichthe threading o the POP Nut™ or the bolt ails.

Test conditions

•Basematerial:Steel,1.2mmthickness

•Bolt:Hexboltorcapscrew(10.9orgreater)

•Jigholediameter(A):Nominalthreadsize + 1 mm

Apply compressive load to the bolt using atensile tester and measure the maximumload at which the threads or backside fangepart o the POP Nut™ ails.

Anti-Rotation Resistance (Spin Out)

The anti-rotation resistance o the POP Nut™, once set depends on several actors:

1 Sheet material In general, hard materials and rough suraces oer a better anti-rotational resistance.

2 Sheet thickness The greater the thickness, the higher the anti-rotational properties.

3 POP Nut™ shape Head Larger sizes increase the anti-rotational resistance.Body section Non round section provide higher anti-rotational resistance than a round section.Body surace Linear knurls increase the anti-rotational resistance.

4 POP Nut™ material

5 Quality o the setting The wrong setting adjustment can dramatically reduce the anti-rotational resistance.

POP Nut™ Spin Out

POP Nut™ can be used with all the screws, providing the maximum torque, ater setting is not exceeded.

POP NUT™ SIZE STEEL/SS (Nm) ALUMINIUM (Nm)

M3 1.2 0.7 M4 3.0 2.0 M5 6.0 4.0 M6 10.0 6.0

M8 24.0 15.0 M10 48.0 27.0 M12 82.0 45.0

For Steel and Stainless POP Nut™, rom size M3 up to M10, these torque values correspond to grade 8.8 screws.

Technical Data

Test conditions: 1.2mm thickness, steel sheet material and appropriate stroke adjustment. The mentioned data are average reerence values only and are based on the at head, open end, product lines. We recommend a specifc test in the proper material thickness and specifc application.

ALUMINIUM STAINLESS STEELSTEEL

Ultimate Thread Ultimate Thread Ultimate ThreadThread Grip Torque Shear Torque Shear Torque Shear

Nm N Nm N Nm N

M3 1.2mm 3800 3.8 >5000 M4 1.2mm 6.9 5200 8.3 >8000 9000 M5 1.2mm 9.5 6300 16.0 11000 16.0 >16000 M6 1.2mm 22.7 10000 24.5 21000 24.0 21000 M8 1.2mm 15000 73.0 30000 71.0 32000 M10 1.2mm 22000 121.0 39000 40000 M12 1.2mm 123+ 50000



Electrolytic Corrosion(Corrosion due to contact between dierent metals)

I dierent metals are immersed in a conductive liquid in a condition whereby they contact each other, the metal othe lower potential (base metal) will become the anode, while the metal o the higher potential (nobler metal) willbecome the cathode. The resulting “local battery” will cause the anode metal to ionize and dissolve (corrode). This

form of corrosion is called galvanic corrosion or electrochemical corrosion, or more generally electrolytic corrosion.

Conditions That Promote Electrolytic Corrosion

(General Environment)

(1) Metals have a large potential dierence

(2) High temperature, high humidity, high acidity

(3) Small area o plating on the anode metal

(4) Air containing salt

Allowable Combinations o Dierent Metals

The MIL-STD-171A can be used only based on limitedmetal combinations as shown in the table below.Generally the electrode potential o the mating metalshould ideally be 0.1 V or higher.

Technical Data

Galvanic Compatibility o various metals(Simplifed table o compatibility)

When two metals are in electrical contact in the presence o an electrolyte, galvanic corrosion is possible.Metal with the greatest negative potential in a galvanic series will corrode most rapidly.

To help prevent corrosion cells rom orming all cracks, crevices, sharp bends, scale and other suracedeposit between interace areas should be avoided where possible.

Galvanised Steel

BASE METAL

Aluminium and Alloys

Steel and Cast Iron

Lead Tin Okated Steel Sheets

Copper / Nickel Copper

Ferritic Stainless Steel

Austenitic Stainless Steel

STEEL ALUMINIUM

POP NUT™ MATERIAL

STAINLESSAUSTENITIC EPOM

Corrosion o the base metal is not increased bythe astener.

Corrosion o the astener is increased by thebase metal.

Corrosion o the base metal is not increased bythe astener.

The plating on the astener is rapidly consumedleaving the bare astener metal. The corrosiono the astener is increased by the base metal.

Corrosion o the base metal is marginallyincreased by the astener.

The plating on the astener is rapidly consumed,leaving the bare astener metal.

Countermeasures to

Electrolytic Corrosion•Selectanutwheretheelectrolyticpotential

is lower or where the potential dierence rom the mating material is small.

•Coateitherthenutorthebasematerialwith

equivalent materials.

•Insulate the nut and base material by coating with a non-conductive material.

•Insertametalwhichhasanintermediate

potential dierence between the nut and thebase material (plating, coating, bush etc).

•Insertametalhavinganintermediate

potential dierence between the nut and

base material (plating, coating, bush, etc.).

Metal

1 -0.50

-0.20

-0.25

-0.30

-0.35

-0.45

-0.50

-0.55

-0.60

-0.70

-0.75

-0.80

-1.05

-1.10

-1.60

2

3 Brass(C2600,etc.),bronze(C5101,etc.)

AusteniticSS(SUS304,etc.)

Ni-Cr alloy

Cu, Cu plating

Cu-Ni alloy, Ti

Ni,Niplating,Ni-Cu-P(monel)

Brass(C2600,etc.),bronze(C5101,etc.)

18%CrSS(SUS410,etc.)

Crplating,12%CrSS(SUS410,etc.)

Sn plating, solder plating

Pb, Pb plating, high-Pb alloy

DuraluminAL(A2000type,7000type)

Carbon Steel, low-alloy steel

Non-duraluminAL(A5000type,etc.)

Non-SiAL(A1000type,etc.)

Cd plating

Molten Zn plating

Zn die-cast alloy

Zn platingMg, Mg alloy

45

6

78

9

1011

13

15

12

14

Electrode potential Allowable combination

GALVANIC COMPATABILITY OF VARIOUS METALS(TABLE OF POTENTIAL DIFFERENCES)

AllowableCombinationsofDifferentMetals(MIL-STD-171A)

Cathode Anode: The metal combinations where both are connected by a line are allowed



Technical Data

Special surace treatment or use on aluminium materials

Steel POP Nut™ aluminium material galvanised layer

The zinc on the POP Nut™ corrodes in the area contacting the aluminium material. Once the POP Nut™corrodes, the aluminium material will also corrode. Although the degree o corrosion is small and thecombination o steel POP Nut™ and aluminium materials is easible in an indoor environment, cautionmust be exercised in an outdoor environment.

Corrosion o the aluminium material can be reduced by changing the surace treatment o the POP Nut™.

Recommended Surace treatments or use with aluminium materials

•XylanCoatingTF217

•Zinc/Nickel+sealer(clearorblack)TF224,TF223

•Zinc/Iron+sealer(black)TF978

Othersurfacetreatmentsarealsopossible.Fordetails,pleasecontactEmhartTeknologies.

Strength perormance with elevated temperature

This is important to consider when the joint will be exposed to elevated temperatures.The graphs below are or reerence only; specifc evaluation should given or each case.

ALUMINIUM

100

90

80

70

60

50

50 100 150 200 C˚

ELEVATED TEMPERATURE

%stated

strengthvalue

STEEL

100

90

80

70

60

50

100 200 300 400 C˚


%stated

strengthvalue

STAINLESS STEEL

100

90

80

70

60

50

100 200 300 400 C˚


%stated

strengthvalue

Steel POP Nut™

Galvanised layer

Aluminium material



Aluminium

PAFO HEAD TYPE SECTION

Flat Head Open End Round

11.0 1.5-2.5 PAFO-0425 6.1 9.3 0.8 6.0 32943 10,000 32859 500 0.5

12.0 2.5-3.5 PAFO-0435 6.1 9.3 0.8 6.0 32944 10,000 32860 500 0.6

11.8 1.5-2.5 PAFO-0525 7.1 10.3 1.0 7.0 32946 10,000 32862 500 0.7

12.8 2.5-3.5 PAFO-0535 7.1 10.3 1.0 7.0 32947 10,000 32863 500 0.8

13.8 1.0-2.5 PAFO-0625 9.1 12.3 1.5 9.0 32948 5,000 32864 500 1.2

15.3 2.5-4.0 PAFO-0640 9.1 12.3 1.5 9.0 32949 3,000 32865 500 1.6

15.3 1.0-2.5 PAFO-0825 11.1 14.3 1.5 11.0 33009 2,500 32866 250 1.5

16.9 2.5-4.0 PAFO-0840 11.1 14.3 1.5 11.0 32951 2,000 32867 250 2.3

15.8 1.0-2.5 PAFO-1025 13.1 16.3 1.5 13.0 32952 2,000 32868 200 2.2

17.3 2.5-4.0 PAFO-1040 13.1 16.3 1.5 13.0 32953 2,000 32869 200 2.5

M4

M5

M6

M8

M10

BULK SMALLDESCRIPTION PACK PACK /1000

M l g d h d k k d ARTICLE BOXQTY ARTICLE BOXQTY

mm mm mm mm mm mm kg

M =Thread Size; l =NominalBodyLength; g=GripRange(Min-Max);d h=Hole Size; d k =Nominal Head Diameter; k =Nominal Head Thickness; d =NominalBarrelDiameter


13.3 0.5-2.0 PAFC-0320* 5.1 8.0 0.8 5.0 33171 7,500 00702 500 0.5

14.8 0.5-3.0 PAFC-0430 6.1 10.0 0.8 6.0 04825 5,000 98001 500 0.7

16.3 3.0-4.5 PAFC-0445* 6.1 10.0 0.8 6.0 33173 4,000 98003 500 0.7

18.0 0.5-3.0 PAFC-0530 7.1 11.0 1.0 7.0 33174 2,500 98005 500 1.1

20.5 3.0-5.5 PAFC-0555* 7.1 11.0 1.0 7.0 33175 2,500 98007 500 1.2

21.5 0.5-3.0 PAFC-0630 9.1 13.0 1.5 9.0 09678 1,500 98009 500 2.3

24.5 3.0-5.5 PAFC-0655* 9.1 13.0 1.5 9.0 48477 1,250 98011 500 2.5

22.5 0.5-3.0 PAFC-0830 11.1 16.0 1.5 11.0 48478 750 98013 250 3.5

25.5 3.0-5.5 PAFC-0855* 11.1 16.0 1.5 11.0 48479 750 98015 250 3.9

M4

M3

M5

M6

M8




PAFCHEAD TYPE SECTION

Flat Head Closed End Round

* Minimum order quantities apply



PAKOHEAD END SECTION

Countersunk Head Open End Round

11.3 1.7-3.5 PAKO-0335* 5.1 8.0 1.5 5.0 00263 10,000 97979 500 0.4

11.5 1.7-3.5 PAKO-0435 6.1 9.0 1.5 6.0 47981 7,500 97981 500 0.5

13.0 3.5-5.0 PAKO-0450* 6.1 9.0 1.5 6.0 47982 5,000 97983 500 0.5

13.0 1.7-4.0 PAKO-0540 7.1 10.0 1.5 7.0 47983 5,000 97985 500 0.7

16.0 4.0-6.5 PAKO-0565* 7.1 10.0 1.5 7.0 47984 4,000 97987 500 0.8

17.0 1.7-4.5 PAKO-0645 9.1 12.0 1.6 9.0 47985 2,000 97989 500 1.6

19.0 4.5-6.5 PAKO-0665* 9.1 12.0 1.5 9.0 47986 2,000 97991 500 1.6

19.0 1.7-4.5 PAKO-0845 11.1 14.0 1.5 11.0 47987 1,250 97993 250 2.1

21.0 4.5-6.5 PAKO-0865* 11.1 14.0 1.5 11.0 33188 1,250 97995 250 2.2

21.0 1.7-4.5 PAKO-1045* 12.5 15.4 1.5 12.4 33189 1,000 97997 250 2.5

23.0 4.5-6.5 PAKO-1065* 12.5 15.4 1.5 12.4 33190 1,000 97999 250 2.7

M3

M4

M5

M6

M10

M8





Aluminium


12POP Nut™ Threaded Insert Systemswww.emhart.com

PAKCHEAD TYPE SECTION

Countersunk Head Closed End Round

15.5 1.7-3.5 PAKC-0435* 6.1 9.0 1.5 6.0 01425 5,000 98017 500 0.7

17.0 3.5-5.0 PAKC-0450* 6.1 9.0 1.5 6.0 33191 5,000 98019 500 0.7

18.0 1.7-4.0 PAKC-0540* 7.1 10.0 1.5 7.0 00892 3,000 98021 500 1.0

20.5 4.0-6.5 PAKC-0565* 7.1 10.0 1.5 7.0 33193 3,000 98023 500 1.1

22.0 1.7-4.5 PAKC-0645* 9.1 12.0 1.5 9.0 33194 1,500 98025 500 2.1

24.0 4.5-6.5 PAKC-0665* 9.1 12.0 1.5 9.0 33195 1,500 98027 500 2.3

25.0 1.7-4.5 PAKC-0845* 11.1 14.0 1.5 11.0 33196 1,000 98029 250 3.3

28.0 4.5-6.5 PAKC-0865* 11.1 14.0 1.5 11.0 33197 750 98031 250 3.7

M4

M5

M6

M8







Aluminium



PARO HEAD END SECTION

Reduced Head Open End Round

11.3 1.5-2.5 PARO-0425 6.1 7.1 0.6 6.0 32955 10,000 32871 500 0.5

12.3 2.5-3.5 PARO-0435 6.1 7.1 0.6 6.0 32956 10,000 32872 500 0.5

11.8 1.5-2.5 PARO-0525 7.1 8.1 0.6 7.0 32958 10,000 32874 500 0.5

13.8 1.0-2.5 PARO-0625 9.1 10.1 0.6 9.0 32960 10,000 32876 500 1.2

15.3 1.0-2.5 PARO-0825 11.1 12.1 0.6 11.0 32962 2,000 32878 250 1.8

M4

M5

M6

M8






Steel

PSZFONHEAD TYPE SECTION SURFACE

Flat Head Open End Round Linear Knurls

10.0 0.5-3.0 PSZFON-0330 5.0 6.8 0.8 4.9 33218 10,000 33217 500 0.9

10.3 0.3-3.0 PSZFON-0430 6.0 8.8 1.0 5.9 33220 10,000 33219 500 1.3

11.8 3.0-4.0 PSZFON-0440 6.0 8.8 1.0 5.9 33222 10,000 33221 500 1.4

12.3 0.3-3.0 PSZFON-0530 7.0 9.8 1.0 6.9 33224 8,000 33223 500 1.8

15.3 3.0-4.0 PSZFON-0540 7.0 9.8 1.0 6.9 33485 5,000 33484 500 2.2

14.8 0.5-3.0 PSZFON-0630 9.0 11.8 1.5 8.9 33213 4,000 33225 500 4.0

16.3 3.0-4.5 PSZFON-0645 9.0 11.8 1.5 8.9 33228 4,000 33227 500 4.0

16.3 0.5-3.0 PSZFON-0830 11.0 14.8 1.5 10.9 33230 2,000 33229 250 5.7

18.8 3.0-5.5 PSZFON-0855 11.0 14.8 1.5 10.9 33232 2,000 33231 250 6.3

17.3 0.5-3.0 PSZFON-1030 12.0 15.8 2.0 11.9 33234 1,500 33233 250 7.0

22.3 3.0-6.0 PSZFON-1060 12.0 15.8 2.0 11.9 33236 1,500 33235 250 7.6

23.3 1.0-4.0 PSZFON-1240 16.0 21.8 2.0 15.9 33238 800 33237 200 16.8

M3

M4

M5

M6

M8

M10

M12





14POP Nut™ Threaded Insert Systemswww.emhart.com

PSZFCN

15.3 0.3-3.0 PSZFCN-0430 6.0 8.8 1.0 5.9 33312 5,000 33311 500 2.1

17.8 0.3-3.0 PSZFCN-0530 7.0 9.8 1.0 6.9 32917 5,000 33055 500 2.9

20.3 0.5-3.0 PSZFCN-0630 9.0 11.8 1.5 8.9 32918 2,000 32835 500 5.8

24.8 0.5-3.0 PSZFCN-0830 11.0 14.8 1.5 10.9 32919 1,500 32836 250 9.8

M4

M5

M6

M8




HEAD TYPE SECTION SURFACE

Flat Head Closed End Round Linear Knurls



Steel


www.emhart.com15 POP Nut™ Threaded Insert Systems

PSZFO HEAD TYPE SECTION


9.8 0.5-2.0 PSZFO-0320* 5.1 8.0 0.8 5.0 00362 10,000 32625 500 1.0

10.8 2.0-3.0 PSZFO-0330* 5.1 8.0 0.8 5.0 33244 10,000 33243 500 1.1

10.8 0.5-3.0 PSZFO-0430 6.1 10.0 0.8 6.0 04846 5,000 08414 500 1.5

12.3 3.0-4.5 PSZFO-0445 6.1 10.0 0.8 6.0 33246 5,000 33245 500 1.5

12.0 0.5-3.0 PSZFO-0530 7.1 11.0 1.0 7.0 32626 4,000 08525 500 2.1

15.0 3.0-5.5 PSZFO-0555 7.1 11.0 1.0 7.0 33248 3,000 33247 500 2.5

14.5 0.5-3.0 PSZFO-0630 9.1 13.0 1.5 9.0 33249 2,000 08526 500 4.3

16.5 3.0-5.5 PSZFO-0655 9.1 13.0 1.5 9.0 33250 2,000 08524 500 4.7

19.0 5.5-8.0 PSZFO-0680 9.1 13.0 1.5 9.0 33252 1,500 98877 500 5.0

16.0 0.5-3.0 PSZFO-0830 11.1 16.0 1.5 11.0 08964 1,250 08527 250 6.4

18.5 3.0-5.5 PSZFO-0855 11.1 16.0 1.5 11.0 33253 1,250 08431 250 7.0

21.5 5.5-8.0 PSZFO-0880 11.1 16.0 1.5 11.0 33255 1,000 33254 250 7.8

19.8 0.8-3.5 PSZFO-1035 12.5 18.5 2.3 12.4 00262 750 09673 250 9.8

22.8 3.5-6.0 PSZFO-1060 12.5 18.5 2.3 12.4 33259 750 33258 250 10.8

25.0 1.0-4.0 PSZFO-1240 16.1 23.0 2.0 16.0 08685 400 33260 100 19.6 28.0 4.0-7.0 PSZFO-1270 16.1 23.0 2.0 16.0 33262 300 33261 100 21.1

M3

M4

M5

M6

M8

M10

M12





PSZFC HEAD TYPE SECTION


14.8 0.5-3.0 PSZFC-0430 6.1 10.0 0.8 6.0 33264 5,000 33263 500 2.1

16.3 3.0-4.5 PSZFC-0445* 6.1 10.0 0.8 6.0 33266 4,000 33265 500 2.1

18.0 0.5-3.0 PSZFC-0530 7.1 11.0 1.0 7.0 33268 2,500 08528 500 3.4

20.5 3.0-5.5 PSZFC-0555* 7.1 11.0 1.0 7.0 33270 2,500 33269 500 3.6

21.5 0.5-3.0 PSZFC-0630 9.1 13.0 1.5 9.0 33271 1,500 08529 500 6.8

24.5 3.0-5.5 PSZFC-0655 9.1 13.0 1.5 9.0 33273 1,250 33272 250 7.5

22.5 0.5-3.0 PSZFC-0830 11.1 16.0 1.5 11.0 33274 1,000 09672 250 9.7

25.5 3.0-5.5 PSZFC-0855 11.1 16.0 1.5 11.0 33276 750 33275 250 10.9

M4

M5

M6

M8







Steel


www.emhart.com 16POP Nut™ Threaded Insert Systems

PSZKONHEAD TYPE SECTION SURFACE

Countersunk Head Open End Round Linear Knurls

11.8 2.0-3.5 PSZKON-0435 6.0 8.5 1.6 5.9 32924 10,000 33314 500 1.4

13.8 2.0-4.0 PSZKON-0540 7.0 9.5 1.6 6.9 32925 8,000 33315 500 1.9

16.3 2.0-4.5 PSZKON-0645 9.0 11.5 1.6 8.9 33317 4,000 33316 500 3.6

19.3 2.0-4.5 PSZKON-0845 11.0 13.5 1.6 10.9 33319 2,000 33318 250 5.9

21.3 2.0-4.5 PSZKON-1045 12.0 14.5 1.6 11.9 33321 1,500 33320 250 6.1

M4

M5

M6

M8

M10




PSZKCN

17.3 2.0-3.5 PSZKCN-0435 6.0 8.5 1.6 5.9 33323 5,000 33322 500 2.3

20.3 2.0-4.0 PSZKCN-0540 7.0 9.5 1.6 6.9 32929 5,000 33056 500 3.2

23.3 2.0-4.0 PSZKCN-0645 9.0 11.5 1.6 8.9 33057 2,000 33058 500 6.0

27.8 2.0-4.5 PSZKCN-0845 11.0 13.5 1.6 10.9 32931 1,500 32847 250 9.7

M4

M5

M6

M8




HEAD TYPE SECTION SURFACE

Countersunk Head Closed End Round Linear Knurls



Steel



PSZKO HEAD TYPE SECTION


11.3 1.7-3.5 PSZKO-0335* 5.1 8.0 1.5 5.0 33278 10,000 33277 500 1.1

11.5 1.7-3.5 PSZKO-0435 6.1 9.0 1.5 6.0 33279 7,500 08518 500 1.3

13.0 3.5-5.0 PSZKO-0450* 6.1 9.0 1.5 6.0 33281 5,000 33280 500 1.5

13.0 1.7-4.0 PSZKO-0540 7.1 10.0 1.5 7.0 33282 5,000 08797 500 2.0

16.0 4.0-6.5 PSZKO-0565 7.1 10.0 1.5 7.0 33284 4,000 33283 500 2.3

17.0 1.7-4.5 PSZKO-0645 9.1 12.0 1.5 9.0 33285 2,000 08808 500 4.2

19.0 4.5-6.5 PSZKO-0665 9.1 12.0 1.5 9.0 33287 2,000 33286 500 4.7

19.0 1.7-4.5 PSZKO-0845 11.1 14.0 1.5 11.0 33288 1,250 08991 250 6.3

21.0 4.5-6.5 PSZKO-0865 11.1 14.0 1.5 11.0 33290 1,250 33289 250 7.0

21.0 1.7-4.5 PSZKO-1045 12.5 15.4 1.5 12.4 00589 1,000 08965 250 7.6

23.0 4.5-6.5 PSZKO-1055 12.5 15.4 1.5 12.4 33292 1,000 33291 250 8.2

26.0 2.0-4.5 PSZKO-1245 16.1 19.0 1.8 16.0 33294 500 33293 100 16.9

29.0 4.5-7.5 PSZKO-1275 16.1 19.0 1.8 16.0 33296 400 03958 100 18.0

M3

M4

M5

M6

M8

M10

M12





PSZKC

15.5 1.7-3.5 PSZKC-0435 6.1 9.0 1.5 6.0 33297 5,000 08511 500 2.0

17.0 3.5-5.0 PSZKC-0450* 6.1 9.0 1.5 6.0 04837 5,000 97877 500 2.2

18.0 1.7-4.0 PSZKC-0540 7.1 10.0 1.5 7.0 33301 3,000 33300 500 3.0

20.5 4.0-6.5 PSZKC-0565* 7.1 10.0 1.5 7.0 33303 3,000 33302 500 3.4

22.0 1.7-4.5 PSZKC-0645 9.1 12.0 1.5 9.0 33305 1,500 33304 500 6.1

24.0 4.5-6.5 PSZKC-0665* 9.1 12.0 1.5 9.0 33306 1,500 08428 500 6.5

25.0 1.7-4.5 PSZKC-0845 11.1 14.0 1.5 11.0 33308 1,000 33307 250 9.2

28.0 4.5-6.5 PSZKC-0865* 11.1 14.0 1.5 11.0 33310 750 33309 250 10.1

M4

M5

M6

M8

HEAD TYPE SECTION

Countersunk Head Closed End Round







Steel



PSZRONHEAD TYPE SECTION SURFACE

Reduced Head Open End Round Linear Knurls

10.3 0.5-3.0 PSZRON-0430 6.0 6.8 0.6 5.9 33036 10,000 33042 500 0.9

11.8 0.5-3.0 PSZRON-0530 7.0 7.8 0.6 6.9 33049 10,000 33048 500 1.4

14.3 0.5-3.0 PSZRON-0630 9.0 9.8 0.6 8.9 33047 4,000 33046 500 3.0

15.8 0.5-3.0 PSZRON-0830 11.0 11.8 0.6 10.9 33240 2,000 33239 250 4.4

19.8 0.8-3.5 PSZRON-1035 12.0 13.3 0.8 11.9 33242 2,000 33241 200 6.0

M4

M5

M6

M8

M10




PSZROHEAD TYPE SECTION


10.8 0.5-3.0 PSZRO-0430 6.1 6.5 0.5 6.0 00363 10,000 08856 500 1.1

12.0 0.5-3.0 PSZRO-0530 7.1 7.5 0.5 7.0 33380 5,000 09659 500 1.6

15.0 3.0-5.5 PSZRO-0555 7.1 7.5 0.5 7.0 33382 4,000 33381 500 1.8

14.5 0.5-3.0 PSZRO-0630 9.1 9.5 0.5 9.0 00364 3,000 08530 500 3.4

16.5 3.0-5.5 PSZRO-0655 9.1 9.5 0.5 9.0 33385 2,500 33384 500 3.7

16.0 0.5-3.0 PSZRO-0830 11.1 11.5 0.5 11.0 00366 2,000 08937 250 5.0

18.5 3.0-5.5 PSZRO-0855 11.1 11.5 0.5 11.0 33387 1,500 33386 250 5.5

19.5 0.8-3.5 PSZRO-1030 12.5 12.9 0.5 12.4 33389 1,250 33388 250 6.7

M4

M5

M6

M8

M10






Steel



PSZROX

9.0 0.5-1.5 PSZROX-0315 4.8 5.3 0.5 4.7 33356 10,000 32853 500 0.6

10.4 0.5-1.5 PSZROX-0415 6.4 7.0 0.6 6.3 33051 10,000 33052 500 1.2

12.0 0.5-2.0 PSZROX-0520 7.2 7.8 0.6 7.2 33040 10,000 33045 500 1.5

14.8 0.8-2.5 PSZROX-0625 9.6 10.5 0.9 9.5 33360 4,000 33214 500 3.4

16.0 1.0-3.0 PSZROX-0830 10.6 11.5 0.8 10.5 33362 4,000 33215 250 4.1

M3

M4

M5

M6

M8




HEAD TYPE SECTION




Steel



PSZFOHHEAD TYPE SECTION

Flat Head Open End Hexagonal

11.5 0.5-3.0 PSZFOH-0430 6.1 9.3 1.0 6.0 32920 10,000 32837 500 1.6

13.5 0.5-3.0 PSZFOH-0530 7.1 10.3 1.0 7.0 32592 5,000 32591 500 2.4

15.5 0.5-3.0 PSZFOH-0630 9.1 12.3 1.5 9.0 32594 3,000 32593 500 4.8

17.5 0.5-3.0 PSZFOH-0830 11.1 14.3 1.5 11.0 32596 2,000 32595 250 7.2

19.0 3.0-5.5 PSZFOH-0855 11.1 16.0 1.5 11.0 33334 1000 33333 250 7.5

22.0 5.5-8.0 PSZFOH-0880 11.1 16.0 1.5 11.0 33336 750 33335 250 8.1

22.0 1.0-4.0 PSZFOH-1040 13.1 16.3 2.0 13.0 32597 750 32598 250 12.0

23.5 3.5-6.0 PSZFOH-1060 13.1 19.0 2.0 13.0 33340 500 33339 250 12.3

M4

M5

M6

M8

M10




PSZFCHHEAD TYPE SECTION

Flat Head Closed End Hexagonal

14.5 0.5-2.0 PSZFCH-0420* 6.1 9.0 1.0 6.0 33342 5,000 33341 500 2.2

19.0 0.5-3.0 PSZFCH-0530 7.1 10.0 1.0 7.0 33343 2,500 06902 500 3.6

21.5 0.5-3.0 PSZFCH-0630 9.1 13.0 1.5 9.0 33345 1,500 33344 500 7.4

23.5 3.0-5.5 PSZFCH-0655* 9.1 13.0 1.5 9.0 33347 1,500 33346 500 7.6

24.5 0.5-3.0 PSZFCH-0830 11.1 16.0 1.5 11.0 33488 750 33348 250 11.6

27.0 3.0-5.5 PSZFCH-0855* 11.1 16.0 1.5 11.0 33351 700 33350 100 12.0

31.0 0.8-3.5 PSZFCH-1035 13.1 19.0 2.0 13.0 33353 400 33352 100 19.0

33.5 3.5-6.0 PSZFCH-1060* 13.1 19.0 2.0 13.0 33355 400 33354 100 19.4

M4

M5

M6

M8

M10







PSZROH

12.3 0.5-3.0 PSZROH-0425 6.1 6.8 0.9 6.0 32599 10,000 32600 250 1.5

13.8 0.5-2.5 PSZROH-0525 7.1 8.0 0.9 7.0 32602 5,000 32601 250 1.7

16.5 3.0-5.5 PSZROH-0555 7.1 7.7 0.6 7.0 33364 4000 33363 500 2.3

15.8 0.5-2.5 PSZROH-0625 9.1 10.0 0.9 9.0 32604 3,000 32603 250 4.2

18.5 3.0-5.5 PSZROH-0655 9.1 9.8 0.7 9.0 33367 2000 06188 500 4.6

17.8 0.5-3.0 PSZROH-0825 11.1 12.0 0.9 11.0 32605 2,000 32606 250 6.2

20.5 3.0-5.5 PSZROH-0855 11.1 11.8 0.7 11.0 33369 1250 33368 250 6.9

23.0 0.8-3.5 PSZROH-1035 13.1 13.8 0.7 13.0 33371 750 33370 250 10.5

M4

M5

M6

M8

M10




Steel

HEAD TYPE SECTION

Reduced Head Open End Hexagonal



PSZRCHHEAD TYPE SECTION

Reduced Head Closed End Hexagonal

15.5 0.5-2.0 PSZRCH-0420 6.1 6.6 0.6 6.0 33373 5,000 33372 500 2.0

20.0 0.5-3.0 PSZRCH-0530 7.1 7.7 0.7 7.0 33375 3,000 33374 500 3.3

22.0 0.5-3.0 PSZRCH-0630 9.1 9.8 0.7 9.0 00410 1,750 04838 250 6.6

25.0 0.5-3.0 PSZRCH-0830 11.1 11.8 0.7 11.0 33379 1,000 33378 250 10.5

M4

M5

M6

M8






Steel

PSZROMHEAD TYPE SECTION

Reduced Head Open End Semi-Hexagonal

11.3 1.5-2.5 PSZROM-0425 6.1 7.2 0.7 6.0 33059 10,000 33060 500 1.2

12.3 1.5-2.5 PSZROM-0525 7.1 8.2 0.7 7.0 33044 8,000 33043 500 1.6

14.3 1.0-2.5 PSZROM-0625 9.1 10.2 0.7 9.0 33037 4,000 33041 500 3.3

15.8 1.0-2.5 PSZROM-0825 11.1 12.3 0.7 11.0 33396 2,000 33019 250 4.7

18.3 1.0-2.5 PSZROM-1025 13.1 14.3 0.7 13.0 33024 1,500 33023 200 7.4

M4

M5

M6

M8

M10








PVFCHEAD TYPE SECTION


15.0 0.5-2.0 PVFC-0420 6.1 9.0 1.0 6.0 33210 5,000 05000 250 2.2

17.5 0.5-3.0 PVFC-0530 7.1 10.0 1.0 7.0 33211 2,500 05191 250 3.0

21.5 0.5-3.0 PVFC-0630 9.1 12.0 1.5 9.0 48589 1,500 98035 250 6.6

23.5 0.5-3.0 PVFC-0830 11.1 15.0 1.5 11.0 05241 1,000 05185 250 9.9

M4

M5

M6

M8




Stainless Steel AISI302

PTFO HEAD TYPE SECTION


10.0 0.3-2.5 PTFO-0425 6.0 8.8 1.0 5.9 32964 10,000 32880 500 1.3

11.5 2.5-4.0 PTFO-0440 6.0 8.8 1.0 5.9 32965 10,000 32881 500 1.4

12.0 0.3-3.0 PTFO-0530 7.0 9.8 1.0 6.9 32966 8,000 32882 500 2.0

13.5 3.0-4.0 PTFO-0540 7.0 9.8 1.0 6.9 32967 8,000 32883 500 2.0

14.5 0.5-3.0 PTFO-0630 9.0 11.8 1.5 8.9 32968 4,000 32884 500 3.9

16.0 3.0-4.5 PTFO-0645 9.0 11.8 1.5 8.9 32969 4,000 32885 500 4.2

16.0 0.5-3.0 PTFO-0830 11.0 14.8 1.5 10.9 32970 2,000 32886 250 5.8

18.5 3.0-5.5 PTFO-0855 11.0 14.8 1.5 10.9 32971 2,000 32823 250 6.3

17.0 0.5-3.0 PTFO-1030 13.0 15.8 2.0 12.9 32972 1,500 32887 250 7.7

20.0 3.0-5.5 PTFO-1055 13.0 15.8 2.0 12.9 32973 1,500 39908 250 8.4

M4

M5

M6

M8

M10






AISI304



PTKO

11.8 2.0-3.5 PTKO-0435 6.0 8.8 1.7 5.9 32979 10,000 32893 500 1.5

13.8 2.0-4.0 PTKO-0540 7.0 9.8 1.7 6.9 32980 8,000 32894 500 2.0

16.3 2.0-4.5 PTKO-0645 9.0 11.8 1.7 8.9 32981 4,000 32895 500 3.8

19.3 2.0-4.5 PTKO-0845 11.0 13.8 1.7 10.9 32982 2,000 32896 250 6.3

21.3 2.0-4.5 PTKO-1045 13.0 15.8 1.7 12.9 32983 1,500 32897 250 8.4

M4

M5

M6

M8

M10




HEAD TYPE SECTION


AISI302 Stainless Steel


PTROHEAD TYPE SECTION


10.3 0.5-2.5 PTRO-0425 6.0 6.8 0.8 5.9 32628 10,000 32898 500 1.0

11.8 0.5-3.0 PTRO-0530 7.0 7.8 0.8 6.9 32985 8,000 32899 500 1.5

14.3 0.5-3.0 PTRO-0630 9.0 9.8 0.8 8.9 32986 4,000 32900 500 3.2

15.8 0.5-3.0 PTRO-0830 11.0 11.8 0.8 10.9 32987 2,000 32901 250 4.6

19.8 0.8-3.5 PTRO-1035 13.0 14.3 1.0 12.9 32988 1,500 32902 250 7.2

M4

M5

M6

M8

M10







Stainless Steel AISI302



PTFOM

11.5 0.5-2.5 PTFOM-0425 6.1 9.3 1.0 6.0 32607 5,000 32608 500 1.7

13.5 0.5-3.0 PTFOM-0530 7.1 10.3 1.0 7.0 32610 5,000 32609 500 1.8

15.5 0.5-3.0 PTFOM-0630 9.1 12.3 1.5 9.0 32611 3,000 32612 500 4.2

17.5 0.5-3.0 PTFOM-0830 11.1 14.5 1.5 11.0 32613 2,000 32614 500 6.5

M4

M5

M6

M8




HEAD TYPE SECTION

Flat Head Open End Semi-Hexagonal

PTROM HEAD TYPE SECTION

Reduced Head Open End Semi-Hexagonal

12.3 0.5-2.5 PTROM-0425 6.1 6.8 0.8 6.0 32615 10,000 32616 250 1.2

14.3 0.5-3.0 PTROM-0530 7.1 7.8 0.8 7.0 32618 5,000 32617 250 1.5

16.3 0.5-3.0 PTROM-0630 9.1 9.8 0.8 9.0 32620 3,000 32619 250 3.3

16.5 3.0-5.0 PVROM-0650* 9.1 9.5 0.5 9.0 33151 2,500 32629 250 3.6

18.5 5.0 - 7.0 PVROM-0670* 9.1 9.5 0.5 9.0 33153 2,500 33152 250 3.9

17.3 0.5-3.0 PTROM-0830 11.1 11.8 0.8 11.0 32622 2,000 32621 250 4.9

20.8 1.0-4.0 PTROM-1040 13.1 14.2 1.0 13.0 32623 1,500 32624 250 6.1

M4

M5

M6

M8

M10




* Stainless Steel AISI 304


http://slidepdf.com/reader/full/emhart-pop-blind-rivet-nuts-jack-nut 27/36www.emhart.com 26POP Nut™ Threaded Insert Systems

Hand Tools

PNT110 Hand Plier Tool

PNT210 Ratchet Tool

PNT310 Lever Tool

PNT410 Heavy Duty Lever Tool

• Professionalstandard,robustcastaluminiumand steel design

•Quickchangemandrelandnosepiecedesign

• Adjustablemandrelprotrusion

• Contouredhandlegripsforcomfort

• Professionalstandard,heavydutysteel construction high capacity tool

•Quickchangemandrelandnosepiecedesign

• Strokeadjustmentwithscaledisplay

• Adjustablemandrelprotrusion

• Longlevertoolforoptimumpullingforce

• Quickchangemandrelandnosepiecedesign• Quickreversespinarmforfastwithdrawal

rom set inserts


• Newinnovativecam-designconvertsleverage into pulling orce without the use o linkages

• Longlevertoolforoptimumpullingforce

• Quickchangemandrelandnosepiecedesign


Capacity

Capacity

Capacity

Capacity

Specifcations

Specifcations

Specifcations

Specifcations

Aluminium Open & Closed M3 - M6




Stainless Steel Open & Closed M3 - M5




Steel Open & Closed M3 - M5




Weight 0.68 kg

Length 245mm

Height 108 mm

Width 25.15mm

Tool stroke up to 7.86 mm

Weight 1.15 kg

Length 210mm

Height 157 mm

Nose dia. 21.60mm

Weight 2.45kg

Length 560 mm

Nose dia. 25.10mm

Weight 2.05kg

Length 580 mm

Nose dia. 24.00mm

PNT310PNT110 PNT210 PNT410

Article Number: 43111






Power Tools

Capacity




Specifcations

Weight 1.680 grs

Length 288mm

Height 263mm

Tool stroke 1.3-6.5mm

Working air pressure 4.9-5.9bar

Air consumption approx 6.5 l/insert

Compact, lightweight pneumatic-hydraulic tool

or installation o POP Nuts™ rom M3 to M10.

Automaticmandrelspin-onforfastloadingofinsert.Fastcycletime

eaturing single trigger operation or setting and reverse. Stroke settingand scale on side o tool.

Features & Benefts:

• Lightweightandcompactspin-pullsettingtool

• Singletriggerpullforsettingandspinoff

• Strokeadjustmentmechanism

• Canbeusedwithcounter-balance(clipringprovided)

• Quick-changemandrelandnosepieces

• Swiveljointairconnector

PNT800A

Description Nosepiece & Mandrel Size Unit Code

PNT800A M3 M3 42858

PNT800A M4 M4 42859

PNT800A M5 M5 42860

PNT800A M6 M6 42825

PNT800A M8 M8 42861

PNT800A M10 M10 42862

Mandrel & Nosepiece Table

Article No. Thread Size Mandrel Description

42571 M3x0.5 PNT600-01-3forM3

42572 M4x0.7 PNT600-01-4forM4

42573 M5x0.8 PNT600-01-5forM5

42574 M6x1.0 PNT600-01-6forM6

42575 M8x1.25 PNT600-01-8forM8

42576 M10x1.5 PNT600-01-10forM10

Article No. Nosepiece Size Nosepiece Description

42577 4.0mm PNT600-02-3forM3

42578 4.5mm PNT600-02-4forM4

42579 5.1mm PNT600-02-5forM5

42580 6.1mm PNT600-02-6forM6

42581 8.1mm PNT600-02-8forM8

42582 10.1mm PNT600-02-10forM10



Power Tools

Capacity




Specifcations

Weight 2.74kg

Length 320mm

Height 292mm

Tool stroke 1.3-10.5mm

Working air pressure 5.0-6.0bar(max7bar)

Pneumatic-hydraulic tool or installation

o POP Nuts™ rom M6 to M12.

Automaticmandrelspin-onforfastloadingofinsert.Fastcycletime

eaturing single trigger operation or setting and reverse. Automaticstroke setting.

Features & Benefts:• Fastcycletimewithsingletriggeractionforsettingandspin-off

• Suspensionringsuppliedforusewithcounterbalance

• Quickchangemandrelandnosepiecedesign

• Swiveljointairconnector

PNT1000L-PC(AvailableQ32008)

C o m i n g

s o o n


http://slidepdf.com/reader/full/emhart-pop-blind-rivet-nuts-jack-nut 30/36www.emhart.com29 POP Nut™ Threaded Insert Systems

WellNut® Technical Data

Vibration/Isolating EectWellNut® provides an excellent vibration-isolating eect to absorbvibration and noise.

Vibration-isolatingCharacteristics(ForcedVibrationFrequencyvs. Supporting Load).

To obtain an optimal vibration-isolating eect, select a WellNut® that meets the supporting load vs. vibration requency conditiono your particular application.

The graph shown to the right illustrates the vibration-isolatingcharacteristics o WellNut® specifcally, the relationship o vibration

requency and supporting load when the vibration transmissionrate is 33.3%.

(Note 1) This graph represents average characteristics. The specifc

characteristics will vary depending on the size, tightening torque,material thickness etc.

(Note 2) Determine an appropriate supporting load within theallowable range specifed in the catalogue.

Sealing Eect

WellNuts® are able to seal liquids and gases. They are particularysuited or use in a low-pressure environment.

Insulating Eect

The WellNut® exhibits excellent electrical insulation properties.

WellNut® is available in a chloroprene-rubber as standard or EPDM.

Chloroprene rubber oers stable strength and exhibits average levels

o all benefcial properties. EPDM is particularly suitable in an outdoor

environment where the nut must provide weather resistance, ozone

resistance etc.

Installation Method

WellNut® can be installed when the mating screw is tightend.

M3M6M5M4

1 2 3 4 5 6 7 8

60

80

100

120

140

160

180

200

220

240

260

F o r c e d v i b r a t i o n f r e q u e n c y ( N H z )

Supporting load (Wkg)

How to read the graph

(Example) I a 12-kg motor is installed using our M3 WellNut® asteners, the supporting load is 3 kg. Thereore, excellent vibration-

isolating eect can be achieved at a vibration requency o 125 Hz or above.

N: Forced Vibration requency: Natural Vibration requencyg: Vibration transmission rate

=2(r:33.3%)N_

1Set the WellNut® on

the base material

Multiple base materials

can be astened

eectively

3Fasten the WellNut®

and member using a

screwdriver, etc.

*Fastentoatorqueinthe optimum range.

2Set the member and

bolt to be astened in

the WellNut®

Stable astening strength

can be achieved even in a

blind hole or deep hole


http://slidepdf.com/reader/full/emhart-pop-blind-rivet-nuts-jack-nut 31/36www.emhart.com 30POP Nut™ Threaded Insert Systems

WellNut®


Standard Flange

Large Flange

11.1 0.4-4.0 WNPA-0311-E632 8.0 11.5 1.6 8.0 62776 7,500 62821 100 1.5

11.4 0.4-4.0 WNPA-0411-B832 8.0 11.1 1.3 8.0 62977 7,800 62802 100 1.7

13.1 0.4-4.9 WNPA-0514-10S 9.6 12.7 0.9 9.6 62778 4,700 62805 100 2.7

15.9 0.9-5.9 WNPA-0516-Q1032 9.6 14.3 1.0 9.6 62786 3,800 62820 100 3.0

20.6 7.9-11.4 WNPA-0521-H1032 9.6 14.1 0.9 9.6 62978 3,000 62824 100 3.0

25.4 7.9-16.3 WNPA-0525-10SL 9.6 14.3 1.3 9.6 63079 2,200 62809 100 3.2

38.1 20.6-29.0 WNPA-0538-10XL 9.6 14.3 1.3 9.6 62780 1,500 62822 100 3.5

14.7 0.4-2.8 WNPA-0615-1/4S 12.7 16.0 1.3 12.7 62789 2,500 62819 100 4.5

19.1 4.8-8.7 WNPA-0619-W1420 12.7 16.1 1.3 12.7 62794 2,000 62770 100 5.0

25.4 6.4-11.6 WNPA-0625-J1420 12.7 16.1 1.3 12.7 63077 1,300 62813 100 9.0

15.2 0.4-4.0 WNPA-0815-E51618 15.9 22.2 3.2 15.9 62795 1,200 62817 100 9.0

M3

M4

M5

M6

M8




24.0 9.5-15.4 WNPL-0324-C632 6.3 14.1 0.9 6.3 62775 4,000 62800 100 1.2

12.7 0.4-4.4 WNPL-0413-C832 8.0 19.1 1.5 8.0 62767 3,300 62766 100 1.7

15.8 0.8 - 5.8 WNPL-0516-G1032 9.6 19.1 4.8 9.6 62781 1,800 62823 100 2.0

15.8 0.8 - 5.8 WNPL-0516-J1032 9.6 19.1 2.0 9.6 62783 2,500 62825 100 2.9

16.3 0.8-4.8 WNPL-0615-D1420 12.7 18.8 4.8 12.7 62791 1,600 62816 100 5.7

M3

M4

M5

M6




• Ideal or general purpose use, where dampeningo vibration and shock is required

•Large fange eature increases the bearing suraceor weaker/thinner materials




Snap-In

Sleeve

WellNut®

•Snap-In eature allows part to be pre-attachedto parent material. Ideal or assembly line use.

•The metal sleeve provides a robust bearing area or thetightening screw, ensuring a consistent application torque.

9.6 0.4-1.3 WNPS-0410-2D832 8.0 12.7 1.3 8.0 62788 7,500 62829 100 1.3

8.7 0.4-1.3 WNPS-0509-NP1032 9.6 13.0 1.5 9.6 63072 6,000 62826 100 1.5

9.7 0.4-1.3 WNPS-0510-N1032 9.6 15.9 1.3 9.6 62785 4,800 62827 100 2.0

14.7 0.4-1.6 WNPS-0615-ACM6X1 12.7 20.0 1.3 12.7 62920 2,100 63397 100 5.0

M4

M5

M6




10.5 0.5-2.0 WNPE-0311-C320LSV 7.1 10.5 3.0 7.0 63094 10,000 63398 100 1.3

11.5 0.5-2.0 WNPE-0412-C420SV 8.5 11.5 1.2 8.4 63095 10,000 63399 100 1.7

11.5 0.5-2.0 WNPE-0412-C420LSV 8.5 12.5 3.5 8.4 63096 5,000 63400 100 2.2

11.5 0.5-2.0 WNPE-0412-C420L5SV 8.5 12.5 3.5 8.4 63097 5,000 63401 100 2.1

13.7 0.5-2.0 WNPE-0514-C520SV 10.6 13.5 1.2 10.5 63098 1,000 63402 100 3.0

13.7 0.5-2.0 WNPE-0514-C520LSV 10.6 14.8 4.0 10.5 63099 1,000 63403 100 3.8

17.5 0.5-2.0 WNPE-0618-C620LSV 13.9 18.9 4.5 13.8 63395 1,000 63404 100 7.6

17.5 0.5-2.0 WNPE-0618-E620LSV 13.9 18.9 4.5 13.8 63396 1,000 63405 100 6.7

M3

M4

M5

M6









Jack Nut®


1Thread Jack Nut® Insert onto

mandrel o installation tool,

then insert all the way

3Pass machine screw through

part to be astened, then

tighten until snug.

2Fully collapse insert, then

remove installation tool.

• Ideal or use in thin, sot or brittle application materials

16.5 0.4-4.8 JNS-04 8.4 11.9 1.9 7.8 61910 6,500 62856 100 1.8

22.9 4.8-9.5 JNL-04 8.4 12.2 1.9 7.8 61940 5,200 61945 100 2.0

17.9 0.4-4.8 JNS-05 10.1 13.5 1.9 9.6 61912 4,500 62860 100 2.7

23.5 4.8-9.5 JNL-05 10.1 13.9 1.9 9.6 61941 3,500 61942 100 2.9

18.2 0.4-4.8 JNS-06 11.4 15.9 1.9 11.1 61914 3,200 62864 100 3.6

23.0 4.8-9.5 JNL-06 11.4 15.9 1.9 11.1 61915 2,500 62862 100 4.1

M4

M5

M6




The Jack Nut®

is a at head slotted body blind rivet nut designed to be installed in sotor brittle materials such as plastic, paper, or glass. Its 4 legs expand behind the parentmaterial providing excellent pull out resistance especially in sot materials. The Jack Nut® can be coated with RAINTITE® to seal moisture and hard plastic PVC to preventscratching and galvanic corrosion. Jack Nut® inserts are RoHS compliant.

Installation Method



• ThreadtheJackNut® onto the tool mandrel

• PlaceJackNut® in hole

• SqueezethetoptriggertoinstalltheJackNut®.The tool stalls at a predetermined torque

• Squeezethelowertriggertoreverse

PNT200JN

JNT2200

The JNT1100 is a simple low cost tool that

grips the Jack Nut head so that it can be

installed with a screw and ratchet or box wrench.

• Placeascrewthroughtheappropriateholeinthewrench

• ThreadonaJackNut®

• InsertJackNut® in hole

• Installboltheadwithawrenchorratchettoinstall the Jack Nut®

A stroke controlled tool that installs the

ull range o Jack Nut asteners.

• Setthestrokeofthetoolperthemanual

• ThreadaJackNut® onto the tool mandrel

• InsertJackNut® in hole

• Squeezetoolhandlestogether

• Turnrearknobanticlockwisetounthread

• Toolandmandrelpurchasedseparately

JNT2400

JNT1100

Jack Nut® Tools




A hand operated tool that can install the

ull range o Jack Nut products.

• ThreadaJackNut® onto the tool mandrel

• InsertJackNut® in the hole

• Squeezetoolhandlestogether

• Turnupperknobanticlockwisetounthread

• Toolpurchasedpre-assembledtoselectedmandrel

Tool & Mandrel Article Number

Tool & M4 Mandrel 62868



Mandrel Article Number

M4 40057

M5 40058

M6 40059



Glossary & Technical Advice

Head Style

Flat Preerred. Provides a good bearing area or application surace and or bolted-on part.

Countersunk Usedforushheadsettingrequiringcountersink inappl ication.

Recommend fush or slight head projection above the surace o application or maximum ace contact and clamp.

Reduced Usedfornearushsettingandasanalternativetocountersinking.Notrecommendedforholeswithwidetolerances

or with sot ductile material.

Body Types

Round Usedforgeneral purposeapplications.Recommendhexagontypei fhightorqueresistancerequired.

Round, Knurled Provides improved resistance to turning in round holes especially in soter materials such as engineering plastics

(acetalcopolymers,acetalhomopolymers,polyamides).

Hexagon Usedinconjunctionwithahexagonholetogivemaximumresistancetoappliedtorqueorunscrewingtorque.

Open End Preerred. Optimum length. Minimal blind side protrusion. Not bolt length critical provided the bolt engages all o the

POP Nut™ threads.

Closed End Usedwhereingressofmaterialpastthesecuringboltisrequired.Forpressure-tightapplicationsaspecialclosedend

POP Nut™ with seal beneath the fange may be required.

Materials and Finish

Steel Low Carbon steel, zinc plated with Chrome VI-ree passivation, used or general purpose applications with higher

temperature resistance.

Aluminium Aluminiumalloy,selfcolour.Usedwhenlowweightandhighercorrosionresistanceisrequired.

Stainless Steel A2orA4StainlessSteelwithselfcolourgivinghighertemperatureandcorrosionresistance.StainlesssteelPOPNut™

are suitable or some applications in ood processing industries. Further inormation is available on request.

Finishes Forapplicationsinadverseenvironmentalconditionsalternativenishesareavailableonrequest.

Clamp Thickness, Grip Range and Hole Dimension

Clamp Thickness The total thickness o materials into which the POP Nut™ is to be installed.

Grip Range AparticularPOPNut™canaccommodatespecicmaximumandminimummaterialthickness.

Hole Size TherecommendedholedimensionsfortheapplicationarespeciedintheappropriatePOPNut™table.

Blind-side Set Dimensions

Axial Set Length Set end protrusion is approximately 60% o the length o the POP Nut™ body plus 1mm or bolt end protrusion where

applicable. It is recommended that a trial setting be made i this dimension is critical.

POP Nut™ Selection

Theappl icationmaterial shouldbeof sufcientdensityandthicknesstosupporttheformationofthesetendange.

Determine the application material thickness, thread size and torque resistance required. From the application environmentalconditions decide the material o the POP Nut™. The attached part should touch the head o the POP Nut™ or maximum

torqueperformance.Usingtheappropr iatetables,determinetherecommendedholedimensionsandthePOPNut™size.

Theappl icationboltshouldbeatleastMetricClass8.8strengthandi tstshouldbeMetr ic6Hdesign.Theboltthread

lengthshouldbesufcientlylongtoengageallthreadsinthePOPNut™.

Recommended Bolt Length

Itisrecommendedthatthescrewlengthshouldprotrudeatleast2threadslengthbeyondthePOPNut™openend.

For a closed end POP Nut™ it is recommended that the ollowing ormula be used:

-Maximumboltlength=X+S+e+L2where

X = thickness of the attached part; S = POP Nut™ Flange thickness; e = Thickness of Application; L2 = Length of Body after setting

Quality Accreditation

Qual itysystemsapprovals fromtheworld’shouseholdnamesinmanufactur ingservetoreinforceaccreditation toQS9000/ISO9001/TS16949.

As a result o our continuous design improvement, POP ® astening products are subject to modifcation. The latest technical data and drawings or any specifc product are available on request.



United Kingdom

Emhart Teknologies

177 Walsall RoadBirmingham, B42 1BPUnited Kingdom

Tel: +44 (0) 121 331 2460Fax:+44(0)1213561598

The Netherlands

Emhart Teknologies

Vrijtho 236211 LE, MaastrichtThe NetherlandsTel: +31 (0) 43 850 6400Fax:+31(0)438506418

Spain

Black & Decker Iberica SCASistemas de Fijacion Tucker

Carretera M-300KM.29, 70028802 Alcala de HenaresMadrid, SpainTel: +34 91 887 1470Fax:+34918823602

France

Emhart Fastening & Assembly S.N.C.

ZAdesPetitsCarreaux

2 Bis Avenue des Coquelicots94835 Bonnueil-sur-MarneCèdex,France

Tel: +33 1 56 71 24 37Fax:+33149804293

Germany

Emhart Teknologies (Tucker Fasteners Ltd)

Max-Eyth-Strasse 1D-35394 GiessenGermanyTel: +49 641 4050

Fax:+49641405366

Norway

Emhart Sjong

PO Box 153 LeirdalNO-1009 OsloNorway

Tel: +47 22 90 99 90Fax:+4722909980

Denmark

Emhart Harttung A/S

Farverland1B

DK-2600 GlostrupDenmarkTel: +45 44 84 11 00Fax:+4544846212

Sweden

Emhart Teknik AB

Skjutbanevagen 6PO Box 203S-701 44 ÖrebroSwedenTel: +46 19 205 800Fax:+4619260038

Finland

Emhart Teknologies

Hyttimestarinkuja 4 PL 25FI-02781,Espoo

Finland

Tel: +358 9 819 0060Fax:+3589812428

Poland

Emhart Teknologies

KatowiceTel: +48 327 497 7075Fax:+483274977075

©EmhartTeknologies2008

Documents

Emhart POP Blind Rivet Nuts, Jack Nut